研究者詳細

顔写真

オオツカ マコト
大塚 誠
Makoto Ohtsuka
所属
多元物質科学研究所 附属金属資源プロセス研究センター 高温材料物理化学研究分野
職名
准教授
学位
  • 博士(工学)(東北大学)

委員歴 9

  • 公益社団法人 日本金属学会 会報編集委員

    2007年3月 ~ 継続中

  • 日本金属学会 東北支部 支部委員

    2023年5月 ~ 2025年4月

  • 資源・素材学会 東北支部 幹事

    2020年4月 ~ 2024年3月

  • 資源・素材学会 東北支部 庶務幹事

    2020年4月 ~ 2022年3月

  • 公益社団法人 日本金属学会 会報編集委員委員長

    2019年3月 ~ 2021年3月

  • 公益社団法人 日本金属学会 会報編集委員副委員長

    2015年3月 ~ 2019年3月

  • 公益社団法人 日本金属学会 会誌・欧文誌編集委員

    2008年3月 ~ 2013年3月

  • The 8th IUMRS International Conference on Advanced Materials (IUMRS-ICAM 2003) 実行委員

    2003年3月 ~ 2003年10月

  • 資源・素材学会 東北支部 幹事

    2001年6月 ~ 2003年6月

︎全件表示 ︎最初の5件までを表示

所属学協会 6

  • MRS

  • TMS

  • 応用物理学会

  • 資源・素材学会

  • 日本金属学会

  • 日本MRS

︎全件表示 ︎最初の5件までを表示

研究キーワード 7

  • 材料強度

  • マイクロマシン

  • 水素分離膜

  • 水素吸蔵材料

  • 形状記憶材料

  • 機能性薄膜

  • 組織制御

研究分野 2

  • ナノテク・材料 / 構造材料、機能材料 / 材料強度学

  • ナノテク・材料 / 金属生産、資源生産 / 素材プロセス工学

受賞 3

  1. 第16回学術貢献賞受賞

    2018年9月 公益社団法人 日本金属学会 強磁性形状記憶合金膜の高機能化と新規デバイスへの展開

  2. インテリジェント・コスモス奨励賞

    2004年5月13日 財団法人 インテリジェント・コスモス学術振興財団 強磁性形状記憶合金スパッタ膜の機能性の解明とマイクロアクチュエータの開発

  3. 素材工学会研究奨励賞

    2004年2月19日 財団法人 素材工学研究会 強磁性形状記憶合金スパッタ膜の作製とマイクロアクチュエータの開発

論文 131

  1. Effect of temperature on the growth behavior of AlN crystals by solution growth method using type 304 stainless steel fluxes 国際誌 査読有り

    Go Shinnoda, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    Materials Science in Semiconductor Processing 194 109532-109532 2025年8月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.mssp.2025.109532  

    ISSN:1369-8001

  2. Thermodynamics-assisted solution growth of AlN single crystals with Fe-Cr based fluxes 国際誌 査読有り

    Sen Li, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    Journal of Alloys and Compounds 1022 179933-179933 2025年4月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.jallcom.2025.179933  

    ISSN:0925-8388

    詳細を見る 詳細を閉じる

    In this study, Fe-Cr based fluxes were investigated for the solution growth of AlN single crystals due to the high nitrogen solubility. Thermodynamic calculations demonstrated that the addition of Cr contributed to achieving a higher nitrogen content in Fe-Cr flux, which was expected to improve the AlN growth rate. However, it was found that the growth rate of AlN and the Cr content in the flux were not simply positively correlated. To explain this phenomenon, a mechanism based on the effective nitrogen content in flux was proposed. By further utilizing this mechanism, the Fe-26 mass% Cr (Fe-26Cr) alloy was designed as a flux and the optimal growth temperature was estimated, and then experimentally validated. Using Fe-26Cr flux, the growth rate of AlN reached 48 μm/h at 1675 °C. The full-width at half-maximum (FWHM) of the X-ray rocking curves (XRCs) for the (0002) and (10−12) reflections in grown AlN single crystals were 72 and 90 arcsec, respectively. Furthermore, the introduction of 2 mass% Al into flux (Fe-26Cr-2Al flux) resulted in a reduction of the O impurity concentrations in the grown AlN crystals by approximately 70 % compared to the AlN synthesized without additional Al.

  3. Liquidus surface projection and vertical sections of the phase diagram for the Mo–Mo5SiB2–TiC pseudo-ternary system 国際誌 査読有り

    Xi Nan, Ryogo Sawada, Haruki Nakashima, Masayoshi Adachi, Makoto Ohtsuka, Kyosuke Yoshimi, Hiroyuki Fukuyama

    International Journal of Refractory Metals and Hard Materials 128 106998-106998 2025年4月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.ijrmhm.2024.106998  

    ISSN:0263-4368

    詳細を見る 詳細を閉じる

    TiC-reinforced Mo–Si–B alloys (designated as MoSiBTiC alloys) exhibit great potential for application in the aerospace industry, due to their high melting point, moderate density and attractive high-temperature strength and creep resistance. Nevertheless, further material design and industrialization requires more systematic understanding of the phase diagram and solidification paths of Mo–Mo5SiB2–TiC pseudo-ternary system. In this study, an advanced ultra-high temperature thermal analysis method employing blackbody radiation and an electromagnetic levitation technique for in situ observation of the solidification process, were utilized to experimentally investigate the solidification process and reaction temperature of alloys in the vicinity of the Mo–Mo5SiB2–TiC ternary eutectic point. On the basis of the experimental results, three vertical sections of phase diagram at 9 mol% Mo5SiB2, 10 mol% TiC, and 70 mol% Moss isopleths in the Mo–Mo5SiB2–TiC pseudo-ternary system were established. The liquidus surface projection on the Mo–Mo5SiB2–TiC system has also been reconstructed, with the addition of a new Mo2B primary phase region and a larger Mo5SiB2 primary phase region than previously reported.

  4. Density, Normal Spectral Emissivity, Heat Capacity, and Thermal Conductivity of the Ti6Al4V Melt Measured by Electromagnetic Levitation with a Static Magnetic Field 国際誌 査読有り

    Manabu Watanabe, Suguru Funada, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    International Journal of Thermophysics 46 (4) 2025年2月25日

    出版者・発行元: Springer Science and Business Media LLC

    DOI: 10.1007/s10765-025-03521-9  

    ISSN:0195-928X

    eISSN:1572-9567

    詳細を見る 詳細を閉じる

    This study aimed to accurately measure the density (ρ), normal spectral emissivity (ε), heat capacity at constant pressure (C p ), and thermal conductivity (κ) of the Ti–6 mass % Al–4 mass % V (Ti64) melt by electromagnetic levitation with a static magnetic field and laser modulation calorimetry. A static magnetic field was applied to the levitated Ti64 melt to suppress the surface oscillation and translational motion of the droplets, and to suppress the convection flow inside the droplet for each property measurement, as needed. The measurement uncertainty was analyzed for all of the thermophysical property data. The excess volume and excess heat capacity of the Ti64 melt obtained in this study were compared with those evaluated using the ideal solution model. The contribution of the thermal vibrations of the atoms in κ for the Ti64 melt was evaluated from the difference between the measured thermal conductivity (κ) value and the κ values calculated using the Wiedemann–Franz law.

  5. Development of a New Solution Growth Method for AlN Single Crystals Using Type 430 Ferritic Stainless Steel Flux 国際誌 査読有り

    Sen Li, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    Crystal Growth & Design 24 (13) 5549-5558 2024年6月13日

    出版者・発行元: American Chemical Society (ACS)

    DOI: 10.1021/acs.cgd.4c00329  

    ISSN:1528-7483

    eISSN:1528-7505

    詳細を見る 詳細を閉じる

    The solution growth method is an economical and environmentally friendly approach to producing aluminum nitride (AlN) single crystals. However, the fluxes used in the solution growth method have low nitrogen solubility, which limits the growth rate of AlN. In this study, as part of the development of a solution growth method for AlN using Fe-Cr fluxes with high nitrogen solubility, experiments were conducted using type 430 ferritic stainless steel, which is composed mainly of Fe-Cr, as the flux. Through a series of experiments, we report the results of the optimization of various experimental growth parameters (AlN polarity, cooling rate, and growth temperature). Furthermore, a growth mechanism based on the Al:N ratio in the flux is proposed, introducing the concept of effective nitrogen content to explain how the growth temperature affects the AlN growth rate using Fe-Cr flux. © 2024 The Authors. Published by American Chemical Society.

  6. Multilayer Fe3O4-doped ITO indium saving indium tin oxide thin films 国際誌 国際共著 査読有り

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    Molecular Crystals and Liquid Crystals 769 (2) 226-233 2024年6月3日

    出版者・発行元: Taylor and Francis Ltd.

    DOI: 10.1080/15421406.2024.2355397  

    ISSN:1542-1406

    eISSN:1563-5287

    詳細を見る 詳細を閉じる

    Multilayer Fe3O4-doped indium saving indium-tin oxide (ITO) thin films were fabricated by sputtering method. Double-layered Fe3O4-doped indium saving indium-tin oxide (ITO) thin films consisted of 12 nm layer of conventional indium tin oxide (90 mass% In2O3 and 10 mass% SnO2) and 138 nm layer of indium saving indium-tin oxide (50 mass% In2O3, 50 mass% SnO2 and Fe3O4-doped) were grown on preheated at 523 K glass substrates. Obtained polycrystalline ITO thin films exhibit volume resistivity of 416 µΩcm, electron mobility 28 cm2/V·s, carrier density 5.3 × 1020 cm−3 and average optical transmittance above 85% in visible range of spectrum. © 2024 Taylor & Francis Group, LLC.

  7. Experimental investigations of 9 mol.% Mo5SiB2 isopleth phase diagram in Mo–Mo5SiB2 –TiC pseudo-ternary system 国際誌 査読有り

    Xi Nan, Ryogo Sawada, Haruki Nakashima, Masayoshi Adachi, Makoto Ohtsuka, Kyosuke Yoshimi, Hiroyuki Fukuyama

    Materials Today Communications 39 109239-1-109239-9 2024年6月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.mtcomm.2024.109239  

    ISSN:2352-4928

    詳細を見る 詳細を閉じる

    The present work focuses on gaining a systematic understanding of the microstructure variation and solidification reactions of alloys in the Mo-rich portion of the Mo–Mo5SiB2(T2)–TiC pseudo-ternary system. A series of MoSiBTiC alloys with 9 mol% T2 were selected from the vicinity of the Mo–TiC binary and Mo–Mo5SiB2(T2)–TiC ternary eutectic point to carefully examine the solidification pathway and phase diagram. The solidification reaction temperature of the alloys was detected via an ultra-high-temperature thermal analysis method using blackbody radiation. Solidification was observed in situ using an electromagnetic levitation (EML) apparatus, and the microstructure evolution of solidified EML samples under different thermal histories was characterized. The results provide an experimentally based reassessment of the liquidus surface projection. The primary Moss phase region is shown to be larger than indicated in previously reported data, and a Mo2B primary region should exist in the triangle. As the main result of the investigation of the solidification pathway of a series of MoSiBTiC alloys, an isopleth phase diagram with 9 mol.% T2 in Mo–Mo5SiB2(T2)–TiC pseudo-ternary system is presented.

  8. Comparative study of RF sputtered Fe2O3- and Fe3O4-doped indium saving indium tin oxide thin films 国際誌 国際共著 査読有り

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    Molecular Crystals and Liquid Crystals 768 (8) 128-138 2024年5月15日

    出版者・発行元: Taylor and Francis Ltd.

    DOI: 10.1080/15421406.2024.2348192  

    ISSN:1542-1406

    eISSN:1563-5287

    詳細を見る 詳細を閉じる

    In present work the properties of iron-doped indium tin oxide (ITO) films with reduced to 50 mass% indium oxide content prepared by co-sputtering of ITO and Fe2O3 targets and ITO and Fe3O4 targets in mixed argon–oxygen atmosphere were studied by various methods. The influence of different working gas flow rates, RF power of iron oxide targets, type of doping oxide and heat treatment temperatures on the electrical, optical, structural, and morphological properties of the films was characterized by means of four-point probe method, ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffraction and atomic force microscopy. © 2024 Taylor & Francis Group, LLC.

  9. Origami-Inspired Bistable SMA Microdevice 国際誌 国際共著 査読有り

    Vincent Gottwald, Lena Seigner, Makoto Ohtsuka, Manfred Kohl

    International Conference on Shape Memory and Superelastic Technologies 84840 74-75 2024年5月6日

    出版者・発行元: ASM International

    DOI: 10.31399/asm.cp.smst2024p0074  

    ISSN:2831-9532

    eISSN:2831-9524

  10. Synthesis of AlN single crystal by solution growth method using type 430 ferritic stainless steel flux 国際誌 査読有り

    Sen Li, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    AIP Advances 13 (8) 085105-1-085105-5 2023年8月1日

    出版者・発行元: AIP Publishing

    DOI: 10.1063/5.0161962  

    eISSN:2158-3226

    詳細を見る 詳細を閉じる

    We propose a new AlN crystal growth method using Fe-based fluxes. AlN single crystals with a thickness of 67–212 µm were epitaxially grown on an AlN bulk substrate by a solution growth method using type 430 ferritic stainless steel flux. The full width at half maximum values of the x-ray rocking curves of (0002) and (10–12) of the synthesized AlN were 137 and 83 arcsec, respectively. The impurity concentrations of carbon were significantly decreased from 3 × 1019 atoms/cm3 in seed crystal to 6 × 1017 atoms/cm3 in synthesized crystal. The features of the method developed in this study are described as follows: (1) steel-based alloys are used as a flux, which are readily available and low-cost; (2) the growth temperature is 1700 °C, which is much lower than that of the sublimation method; (3) no high-pressure vessel is required because growth can be performed under 1 atmospheric pressure conditions; and (4) waste gas detoxification equipment is not required because only N2 gas is used and no toxic or flammable gases are used. Because of the above features (1) through (4), this is an effective crystal growth process from the perspective of ensuring the economics and safety of the facility.

  11. DC sputtered iron-doped indium saving indium tin oxide thin films using Fe3O4 target 国際誌 国際共著 査読有り

    Svitlana Petrovska, Rruslan Sergiienko, Takashi Nakamura, Makoto Ohtsuka

    Molecular Crystals and Liquid Crystals 767 (1) 70-78 2023年7月4日

    出版者・発行元: Informa UK Limited

    DOI: 10.1080/15421406.2023.2228593  

    ISSN:1542-1406

    eISSN:1563-5287

    詳細を見る 詳細を閉じる

    In the present work, the properties of iron-doped indium tin oxide (ITO) films with reduced to 50 mass% indium oxide (In2O3) content prepared by co-sputtering of ITO and Fe3O4 targets in the mixed argon-oxygen atmosphere were studied by various methods such as four-point probe method, Ultraviolet-Visible spectroscopy, X-ray diffraction and dynamic force microscopy. The influence of different working gas flow rates and heat treatment temperatures on the electrical, optical, structural, and morphological properties of the films was characterized. Iron doping resulted in increasing optical transmittance of ITO thin films. It has been found that films sputtered onto preheated substrites under optimum conditions showed values of volume resistivity 1480 µΩcm that is much lower than that of ITO50:Fe3O4 films sputtered onto unheated substrates and average optical transmittance in the visible range over 85%. It has been revealed that iron-doped ITO thin films deposited under optimum conditions have low root mean square height (Sq) 0.67 nm and arithmetical mean height (Sa) 0.52 nm.

  12. Resonant Self-Actuation Based on Bistable Microswitching 国際誌 国際共著 査読有り

    Joel Joseph, Makoto Ohtsuka, Hiroyuki Miki, Manfred Kohl

    Actuators 12 (6) 245-1-245-14 2023年6月13日

    出版者・発行元: MDPI AG

    DOI: 10.3390/act12060245  

    eISSN:2076-0825

    詳細を見る 詳細を閉じる

    We present the design, simulation, and characterization of a magnetic shape-memory alloy (MSMA) film actuator that transitions from bistable switching to resonant self-actuation when subjected to a stationary heat source. The actuator design comprises two Ni-Mn-Ga films of 10 µm thickness integrated at the front on either side of an elastic cantilever that moves freely between two heatable miniature permanent magnets and, thus, forms a bistable microswitch. Switching between the two states is induced by selectively heating the MSMA films above their Curie temperature Tc. When continuously heating the permanent magnets above Tc, the MSMA film actuator exhibits an oscillatory motion in between the magnets with large oscillation stroke in the frequency range of 50–60 Hz due to resonant self-actuation. A lumped-element model (LEM) is introduced to describe the coupled thermo-magnetic and magneto-mechanical performance of the actuator. We demonstrate that this performance can be used for the thermomagnetic energy generation of low-grade waste heat (T < 150 °C) with a high power output per footprint in the order of 2.3 µW/cm2.

  13. Effect of oxygen flow rate on properties of multilayer aluminum-doped indium saving ITO thin films produced by sputtering method 国際誌 国際共著 査読有り

    Rruslan Sergiienko, Svitlana Petrovska, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    Molecular Crystals and Liquid Crystals 765 (1) 114-120 2023年5月23日

    出版者・発行元: Informa UK Limited

    DOI: 10.1080/15421406.2023.2215033  

    ISSN:1542-1406

    eISSN:1563-5287

    詳細を見る 詳細を閉じる

    Multilayer aluminum-doped indium saving indium-tin oxide (ITO) thin films with low volume resistivity and high transmittance in the visible spectrum have been designed and fabricated by sputtering method. Double-layered structures consisting of very thin layer of conventional indium tin oxide (In2O3-10 mass % SnO2) and aluminum-doped indium saving indium-tin oxide layer with reduced to 50 mass % In2O3 content are discussed. Multilayer aluminum-doped ITO were deposited on glass substrates preheated at 523 K. Thin films deposited in pure argon demonstrate volume resistivity of 445 µΩcm, mobility of 26 cm2/V·s, carrier concentration of 5.6 × 1020 cm−3 and average transmittance larger than 85% in the visible range. Introducing oxygen to sputtering gas allowed increasing average transmittance of as-deposited multilayer aluminum-doped indium saving ITO thin films over 90% in the visible range. As-deposited multilayer aluminum-doped ITO thin films showed significantly higher transmittance in comparison with undoped ML ITO50/ITO90 and crystallized in In4Sn3O12 structure.

  14. Density and surface tension measurements of molten Al–Si based alloys 国際誌 査読有り

    Hiroyuki Fukuyama, Hideo Higashi, Masayoshi Adachi, Makoto Ohtsuka

    High Temperature Materials and Processes 42 (1) 20220286-1-20220286-11 2023年1月1日

    出版者・発行元: Walter de Gruyter GmbH

    DOI: 10.1515/htmp-2022-0286  

    eISSN:2191-0324

    詳細を見る 詳細を閉じる

    This study is part of a series of studies aimed at measuring the thermophysical properties of molten phase change material-type metallic thermal energy storage materials near 873 K (600°C). The target material is Al–Si based alloys. First, as a feasibility study, density measurements of the molten state of three Al–Si binary alloys (Al–12.2Si, Al–50Si and Al–90Si in atomic%) were performed. A highly accurate non-contact density measurement method based on the static magnetic field superposition electromagnetic levitation (EML) method was employed as the density measurement method. The validity of this experimental method was confirmed, and density of molten Al–Si base alloys (ADC12 and Al–5.9mass%Si–1.6mass%Fe) were measured as a function of temperature with an expanded uncertainty of 1.2%. In addition, the surface tension of the alloys was measured by the droplet oscillation method using the EML technique. The surface tension was successfully obtained as a function of temperature with expanded uncertainty of 2.3%.

  15. Dual-wavelength reflectance-ratio method for emissivity-free temperature measurements applied to electromagnetically levitated liquid Ni 国際誌 査読有り

    Hidekazu Kobatake, Masaya Iwabuchi, Yuma Kurokawa, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama, Naohiko Sasajima, Yoshiro Yamada

    High Temperatures-High Pressures 52 (3-4) 229-247 2023年

    出版者・発行元: Old City Publishing, Inc

    DOI: 10.32908/hthp.v52.1431  

    eISSN:1472-3441

    詳細を見る 詳細を閉じる

    The applicability of the dual-wavelength reflectance-ratio (DWR) method to emissivity-free radiation thermometry of electromagnetically levitated high-temperature liquid metals was investigated. To establish the measurement technique, the DWR method was applied to liquid Ni levitated in a static magnetic field, which suppresses the surface oscillation and the translational motion. In a previous study, temperature of the levitated liquid metals measured by DWR showed deviations of about 95 K to 175 K from the temperature measured by a calibrated pyrometer. Since this discrepancy could be attributed to the imperfect contribution of the auxiliary light, the effect of the optical setup of the auxiliary light on the temperature measurement was investigated in this study. By using a reflecting collimator for the auxiliary optical system and adopting the radiance ratio determined considering the geometrical arrangement of the measurement system, the difference between temperature of liquid Ni kept near its melting temperature (𝑇𝑚 = 1728 K) measured using DWR and the temperature measured by a pyrometer calibrated using the melting point of Ni was 12 K on average and the standard deviation in the temperature measurement was 25 K (𝑛 = 5).

  16. Influence of sputtering power on optical, electrical properties and structure of aluminum-doped indium saving indium-tin oxide thin films sputtered on preheated substrates 国際誌 国際共著 査読有り

    Svitlana Petrovska, Rruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    Molecular Crystals and Liquid Crystals 751 (1) 100-108 2023年1月

    出版者・発行元: Taylor and Francis Ltd

    DOI: 10.1080/15421406.2022.2073534  

    ISSN:1542-1406

    eISSN:1563-5287

  17. Emissivity-free radiation thermometry for high-temperature metals using the dual-wavelength reflectance-ratio method 国際誌 査読有り

    Hidekazu Kobatake, Yuma Kurokawa, Masaya Iwabuchi, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama, Naohiko Sasajima, Yu Yamaguchi, Yoshiro Yamada

    Measurement Science and Technology 34 (1) 015010-1-015010-11 2022年10月20日

    出版者・発行元: IOP Publishing

    DOI: 10.1088/1361-6501/ac8ca3  

    ISSN:0957-0233

    eISSN:1361-6501

    詳細を見る 詳細を閉じる

    Abstract This article describes a preliminary study verifying the applicability of the dual-wavelength reflectance-ratio (DWR) method to emissivity-free radiation thermometry for electromagnetically levitated high-temperature liquid metals. To establish the measurement technique, the DWR method was applied to inductively heated solid spherical Cu and Ni samples. Regardless of the differences in the sample emissivity values, the temperature determined using the DWR method agreed within 20 K with the temperature determined using a thermocouple. It was found that the temperatures of metallic samples having different emissivity values can be determined with a standard uncertainty of 8 K in terms of the absolute temperature when applying the DWR method, even if the sample has curvature and is exposed to high temperatures of up to 1250 K.

  18. Thermal processes of miniature thermomagnetic generators in resonant self-actuation mode 国際誌 国際共著 査読有り

    Joel Joseph, Makoto Ohtsuka, Hiroyuki Miki, Manfred Kohl

    iScience 25 (7) 104569-1-104569-13 2022年7月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.isci.2022.104569  

    ISSN:2589-0042

    eISSN:2589-0042

  19. XPS Investigation of Indium-Saving Indium–Tin Oxide (ITO) Thin Films 国際共著 査読有り

    Svitlana Petrovska, Bogdan Ilkiv, Oleg Khyzhun, Makoto Ohtsuka, Rruslan Sergiienko, Leandro Voisin, Takashi Nakamura

    Nanosistemi, Nanomateriali, Nanotehnologii 20 (2) 305-320 2022年6月

    出版者・発行元: National Academy of Sciences of Ukraine

    DOI: 10.15407/nnn.20.02.305  

    ISSN:1816-5230

    eISSN:2617-3794

  20. In situ observations of the dissolution of an AlN film into liquid Al using a high-temperature microscope 国際誌 査読有り

    Masayoshi Adachi, Keigo Fujiwara, Ryuta Sekiya, Hidekazu Kobatake, Makoto Ohtsuka, Hiroyuki Fukuyama

    Materials Science in Semiconductor Processing 142 106469-1-106469-6 2022年5月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.mssp.2022.106469  

    ISSN:1369-8001

  21. Density, surface tension, and viscosity of Co-Cr-Mo melts measured using electrostatic levitation technique 国際誌 査読有り

    Manabu Watanabe, Yuki Watanabe, Chihiro Koyama, Takehiko Ishikawa, Sayaka Imaizumi, Masayoshi Adachi, Makoto Ohtsuka, Akihiko Chiba, Yuichiro Koizumi, Hiroyuki Fukuyama

    Thermochimica Acta 710 179183-1-179183-7 2022年4月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.tca.2022.179183  

    ISSN:0040-6031

  22. Optical, Electrical Properties and Structure of Multilayer Iron-Doped Indium–Tin Oxide Thin Films Sputtered on Preheated Glass Substrates 国際誌 国際共著 査読有り

    Makoto Ohtsuka, Ruslan Sergiienko, Svitlana Petrovska, Takashi Nakamura

    MATERIALS TRANSACTIONS 63 (2) 224-231 2022年2月1日

    出版者・発行元: Japan Institute of Metals

    DOI: 10.2320/matertrans.mt-m2021133  

    ISSN:1345-9678

    eISSN:1347-5320

  23. Thermophysical properties of liquid Co–Cr–Mo alloys measured by electromagnetic levitation in a static magnetic field 国際誌 査読有り

    Manabu Watanabe, Yuki Takahashi, Sayaka Imaizumi, Yufan Zhao, Masayoshi Adachi, Makoto Ohtsuka, Akihiko Chiba, Yuichiro Koizumi, Hiroyuki Fukuyama

    Thermochimica Acta 708 179119-1-179119-9 2022年2月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.tca.2021.179119  

    ISSN:0040-6031

  24. Elucidation of Gas Formation Effect on Strong Inhibition of Magnetite Dissolution in Cu2S Through In-Situ Analysis of Reactive Interface 国際誌 査読有り

    Seung-Hwan Shin, Sakiko Kawanishi, Sohei Sukenaga, Makoto Ohtsuka, Junichi Takahashi, Hiroyuki Shibata

    Metallurgical and Materials Transactions B 52 (6) 3720-3729 2021年12月

    出版者・発行元: Springer Science and Business Media LLC

    DOI: 10.1007/s11663-021-02279-3  

    ISSN:1073-5615

    eISSN:1543-1916

  25. Effect of Oxygen Flow Rate on Properties of Aluminum-Doped Indium-Saving Indium Tin Oxide (ITO) Thin Films Sputtered on Preheated Glass Substrates 国際誌 国際共著 査読有り

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    Metals 11 (10) 1604-1604 2021年10月9日

    出版者・発行元: MDPI AG

    DOI: 10.3390/met11101604  

    eISSN:2075-4701

  26. Coupling Effects in Parallel Thermomagnetic Generators Based on Resonant Self-Actuation 国際誌 国際共著

    Joel Joseph, Mira Wehr, Hiroyuki Miki, Makoto Ohtsuka, Manfred Kohl

    2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers) 463-466 2021年6月20日

    出版者・発行元: IEEE

    DOI: 10.1109/transducers50396.2021.9495569  

  27. Heusler alloy-based heat engine using pyroelectric conversion for small-scale thermal energy harvesting 国際誌 国際共著 査読有り

    Mickaël Lallart, Linjuan Yan, Hiroyuki Miki, Gaël Sebald, Gildas Diguet, Makoto Ohtsuka, Manfred Kohl

    Applied Energy 288 116617-1-116617-32 2021年4月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.apenergy.2021.116617  

    ISSN:0306-2619

  28. Composition Dependence of Normal Spectral Emissivity of Liquid Ni–Al Alloys 査読有り

    Masayoshi Adachi, Yuji Yamagata, Manabu Watanabe, Sonoko Hamaya, Makoto Ohtsuka, Hiroyuki Fukuyama

    ISIJ International 61 (3) 684-689 2021年3月15日

    出版者・発行元: Iron and Steel Institute of Japan

    DOI: 10.2355/isijinternational.isijint-2020-233  

    ISSN:0915-1559

    eISSN:1347-5460

  29. Lumped Element Model for Thermomagnetic Generators Based on Magnetic SMA Films 国際共著 査読有り

    Joel Joseph, Makoto Ohtsuka, Hiroyuki Miki, Manfred Kohl

    Materials 14 (5) 1234-1-1234-13 2021年3月5日

    出版者・発行元: MDPI AG

    DOI: 10.3390/ma14051234  

    eISSN:1996-1944

  30. Upscaling of Thermomagnetic Generators Based on Heusler Alloy Films 国際誌 国際共著 査読有り

    Joel Joseph, Makoto Ohtsuka, Hiroyuki Miki, Manfred Kohl

    Joule 4 (12) 2718-2732 2020年12月

    DOI: 10.1016/j.joule.2020.10.019  

    ISSN:2542-4351

    eISSN:2542-4351

  31. Dynamic observation of MoSiBTiC alloy phase transitions using in situ ultrahigh-temperature X-ray diffraction measurement 国際誌 査読有り

    Hiroyuki Fukuyama, Makoto Ohtsuka, Ryogo Sawada, Haruki Nakashima, Yasuo Ohishi, Naohisa Hirao, Masaki Takata, Kyosuke Yoshimi

    Materialia 13 100867-1-100867-4 2020年9月

    出版者・発行元: Elsevier BV

    DOI: 10.1016/j.mtla.2020.100867  

    ISSN:2589-1529

    eISSN:2589-1529

  32. Metamagnetic Shape Memory Alloy Thin Plates Consolidated by Compression Shearing Method at Room Temperature for Thermal Energy Harvesting Device 国際誌 国際共著 査読有り

    Hiroyuki Miki, Eijiro Abe, Sho Takeda, Makoto Ohtsuka, Manfred Kohl

    Sensors and Materials 32 (8) 2867-2875 2020年8月31日

    DOI: 10.18494/sam.2020.2938  

    ISSN:0914-4935

  33. Investigation of low field response of metamagnetic Heusler alloys as multiphysic memory alloys 国際誌 国際共著 査読有り

    Mickaël Lallart, Hiroyuki Miki, Linjuan Yan, Gildas Diguet, Makoto Ohtsuka

    Journal of Physics D: Applied Physics 53 (34) 345002-1-345002-10 2020年8月19日

    DOI: 10.1088/1361-6463/ab8c7c  

    ISSN:0022-3727

    eISSN:1361-6463

  34. AlN formation by an Al/GaN substitution reaction 国際誌 査読有り

    Marsetio Noorprajuda, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    Scientific Reports 10 (1) 13058-1-13085-11 2020年8月

    出版者・発行元: Springer Science and Business Media LLC

    DOI: 10.1038/s41598-020-69992-y  

    eISSN:2045-2322

  35. Multilayer indium saving ITO thin films produced by sputtering method 国際誌 国際共著 査読有り

    L. Voisin, M. Ohtsuka, S. Petrovska, R. Sergiienko, T. Nakamura

    Journal of Alloys and Compounds 827 154378-1-154378-7 2020年6月25日

    DOI: 10.1016/j.jallcom.2020.154378  

    ISSN:0925-8388

  36. Effect of Sputtering Power on Optoelectronic Properties of Iron-Doped Indium Saving Indium-Tin Oxide Thin Films 国際誌 国際共著 査読有り

    M. Ohtsuka, R. Sergiienko, S. Petrovska, B. Ilkiv, T. Nakamura

    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 41 (7) 941-952 2019年10月22日

    出版者・発行元:

    DOI: 10.15407/mfint.41.07.0941  

    ISSN:1024-1809

    eISSN:1024-1809

  37. Study of solidification pathway of a MoSiBTiC alloy by optical thermal analysis and in-situ observation with electromagnetic levitation 国際誌

    Hiroyuki Fukuyama, Ryogo Sawada, Haruki Nakashima, Makoto Ohtsuka, Kyosuke Yoshimi

    SCIENTIFIC REPORTS 9 (1) 15049-1-15049-11 2019年10月

    DOI: 10.1038/s41598-019-50945-z  

    ISSN:2045-2322

    eISSN:2045-2322

  38. Iron-doped indium saving indium-tin oxide (ITO) thin films sputtered on preheated substrates 国際共著 査読有り

    M. Ohtsuka, R. Sergiienko, S. Petrovska, B. Ilkiv, T. Nakamura

    Optik 179 (2) 19-28 2019年

    DOI: 10.1016/j.ijleo.2018.10.130  

    ISSN:0030-4026

  39. Containerless measurements of the liquid-state density of Ni-Al alloys for use as turbine blade materials 査読有り

    Masayoshi Adachi, Akari Sato, Sonoko Hamaya, Makoto Ohtsuka, Hiroyuki Fukuyama

    SN APPLIED SCIENCES 1 (1) 18-1-18-7 2019年1月

    DOI: 10.1007/s42452-018-0023-x  

    ISSN:2523-3963

    eISSN:2523-3971

  40. Polarity inversion of AlN film grown on nitrided a-plane sapphire substrate with pulsed DC reactive sputtering 査読有り

    Marsetio Noorprajuda, Makoto Ohtsuka, Hiroyuki Fukuyama

    AIP ADVANCES 8 (4) 045124-1-045124-11 2018年4月

    DOI: 10.1063/1.5024996  

    ISSN:2158-3226

    eISSN:2158-3226

  41. Martensitic transformation in polycrystalline substrate-constrained and freestanding Ni-Mn-Ga films with Ni and Ga excess 査読有り

    Shevyrtalov, S., Miki, H., Ohtsuka, M., Grunin, A., Lyatun, I., Mashirov, A., Seredina, M., Khovaylo, V., Rodionova, V.

    Journal of Alloys and Compounds 741 1098-1104 2018年

    DOI: 10.1016/j.jallcom.2018.01.255  

    ISSN:0925-8388

  42. The evolution of martensitic transformation in Ni-Mn-Ga/Al2O3 polycrystalline 100-nm – 2-μm films with Ni- and Ga-excess 査読有り

    S. Shevyrtalov, H. Miki, M. Ohtsuka, V. Khovaylo, V. Rodionova

    Journal of Alloys and Compounds 767 538-543 2018年

    DOI: 10.1016/j.jallcom.2018.07.144  

    ISSN:0925-8388

  43. Structural, optical and electrical properties of DC sputtered indium saving indium-tin oxide (ITO) thin films 査読有り

    Leandro Voisin, Makoto Ohtsuka, Svitlana Petrovska, Ruslan Sergiienko, Takashi Nakamura

    Optik 156 (3) 728-737 2018年

    DOI: 10.1016/j.ijleo.2017.12.021  

    ISSN:0030-4026

  44. High Field X-ray Diffraction Study for Ni46.4Mn38.8In12.8Co2.0 Metamagnetic Shape Memory Film 査読有り

    Yoshifuru Mitsui, Keiichi Koyama, Makoto Ohtsuka, Rie Y. Umetsu, Ryosuke Kainuma, Kazuo Watanabe

    METALS 7 (9) 2017年9月

    DOI: 10.3390/met7090364  

    ISSN:2075-4701

    eISSN:2075-4701

  45. High-Performance Thermomagnetic Generators Based on Heusler Alloy Films 査読有り

    Marcel Gueltig, Frank Wendler, Hinnerk Ossmer, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi, Manfred Kohl

    ADVANCED ENERGY MATERIALS 7 (5) 1601879-1-1601879-7 2017年3月

    DOI: 10.1002/aenm.201601879  

    ISSN:1614-6832

    eISSN:1614-6840

  46. Structural and magnetic properties of magnetic shape memory alloys on Ni-Mn-Co-In self-standing films 査読有り

    Miki, H., Tsuchiya, K., Ohtsuka, M., Gueltig, M., Kohl, M., Takagi, T.

    Advanced Structured Materials 73 149-160 2017年

    DOI: 10.1007/978-3-319-53306-3_11  

    ISSN:1869-8433

    eISSN:1869-8441

  47. Indium Saving Indium Tin Oxide thin Films Deposited by Sputtering at Room Temperature 査読有り

    Leandro Voisin, Makoto Ohtsuka, S. Petrovska, B. Ilkiv, R. Sergiienko, Takashi Nakamura

    PHYSICS AND CHEMISTRY OF SOLID STATE 18 (1) 69-74 2017年

    DOI: 10.15330/pcss.18.1.69-74  

    ISSN:1729-4428

    eISSN:2309-8589

  48. Effect of sputtering pressure on crystalline quality and residual stress of AlN films deposited at 823K on nitrided sapphire substrates by pulsed DC reactive sputtering 国際誌 査読有り

    Makoto Ohtsuka, Hiroto Takeuchi, Hiroyuki Fukuyama

    JAPANESE JOURNAL OF APPLIED PHYSICS 55 (5) 05FD08-1-05FD08-5 2016年5月

    DOI: 10.7567/JJAP.55.05FD08  

    ISSN:0021-4922

    eISSN:1347-4065

  49. Growth mechanism of AlN crystals via thermal nitridation of sintered Al2O3-ZrO2 plates 査読有り

    Hiroyuki Fukuyama, Mikako Kato, Yu You, Makoto Ohtsuka

    CERAMICS INTERNATIONAL 42 (4) 5153-5159 2016年3月

    DOI: 10.1016/j.ceramint.2015.12.037  

    ISSN:0272-8842

    eISSN:1873-3956

  50. Effect of sputtering power on surface characteristics and crystal quality of AlN films deposited by pulsed DC reactive sputtering 査読有り

    Hiroto Takeuchi, Makoto Ohtsuka, Hiroyuki Fukuyama

    PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS 252 (5) 1163-1171 2015年5月

    DOI: 10.1002/pssb.201451599  

    ISSN:0370-1972

    eISSN:1521-3951

  51. Thermal energy harvesting based on magnetic shape memory alloy thin films 国際誌 国際共著 査読有り

    M. Gültig, M. Ohtsuka, H. Miki, T. Takagi, M. Kohl

    MikroSystemTechnik Kongress 2015 "MEMS, Mikroelektronik, Systeme", Proceedings 270-273 2015年

  52. Temperature dependent magnetic and structural properties of Co2(Fe, Ti)Ga thin films

    V. Rodionova, S. Shevyrtalov, K. Chichay, A. Okubo, R. Kainuma, R. Y. Umetsu, M. Ohtsuka, A. Bozhko, V. Golub, M. Gorshenkov, M. Lyange, V. Khovaylo

    Solid State Phenomena 233-234 674-677 2015年

    出版者・発行元: Trans Tech Publications Ltd

    DOI: 10.4028/www.scientific.net/SSP.233-234.674  

    ISSN:1662-9779

    eISSN:1662-9779

  53. Structural and transport properties of Ni45Mn40In15 thin films 国際誌 国際共著

    M. V. Lyange, M. V. Gorshenkov, A. V. Bogach, M. Ohtsuka, H. Miki, T. Takagi, V. V. Khovaylo

    Solid State Phenomena 233-234 670-673 2015年

    出版者・発行元: Trans Tech Publications Ltd

    DOI: 10.4028/www.scientific.net/SSP.233-234.670  

    ISSN:1662-9779

    eISSN:1662-9779

  54. Influence of substrate temperature on the crystalline quality of AlN layers deposited by RF reactive magnetron sputtering 査読有り

    Tomoyuki Kumada, Makoto Ohtsuka, Hiroyuki Fukuyama

    AIP ADVANCES 5 (1) 017136-1-12 2015年1月

    DOI: 10.1063/1.4906796  

    ISSN:2158-3226

    eISSN:2158-3226

  55. High Frequency Thermal Energy Harvesting Using Magnetic Shape Memory Films 査読有り

    Marcel Gueltig, Hinnerk Ossmer, Makoto Ohtsuka, Hiroyuki Miki, Koki Tsuchiya, Toshiyuki Takagi, Manfred Kohl

    ADVANCED ENERGY MATERIALS 4 (17) 1400751-1-1400751-8 2014年12月

    DOI: 10.1002/aenm.201400751  

    ISSN:1614-6832

    eISSN:1614-6840

  56. Growth of AlN Crystals on SiC Substrates by Thermal Nitridation of Al2O3 査読有り

    Yu You, Makoto Ohtsuka, Hideto Miyake, Hiroyuki Fukuyama

    JOURNAL OF THE AMERICAN CERAMIC SOCIETY 97 (12) 3781-3786 2014年12月

    DOI: 10.1111/jace.13183  

    ISSN:0002-7820

    eISSN:1551-2916

  57. PHASE STABILITY OF L2(1) PHASE IN Co-BASED HEUSLER ALLOYS 査読有り

    Rie Y. Umetsu, Akinari Okubo, Makoto Nagasako, Makoto Ohtsuka, Ryosuke Kainuma, Kiyohito Ishida

    SPIN 4 (4) 1440018-1-1440018-14 2014年12月

    DOI: 10.1142/S2010324714400189  

    ISSN:2010-3247

    eISSN:2010-3255

  58. The Influence of ZrO2 Additions on Al2O3 Evaporation and AlN Crystal Growth by Thermal Nitridation of Al2O3-ZrO2 Pellets 査読有り

    Yu You, Mikako Kato, Makoto Ohtsuka, Hiroyuki Fukuyama

    JOURNAL OF THE AMERICAN CERAMIC SOCIETY 96 (10) 3054-3060 2013年10月

    DOI: 10.1111/jace.12545  

    ISSN:0002-7820

    eISSN:1551-2916

  59. Martensitic transformation and magnetic anisotropy in Ni-Mn-Ga/NaCl(001) thin films probed by ferromagnetic resonance 査読有り

    I. R. Aseguinolaza, V. Golub, J. M. Barandiaran, M. Ohtsuka, P. Mueller, O. Y. Salyuk, V. A. Chernenko

    Applied Physics Letters 102 (18) 182401-1-182401-4-3 2013年5月

    DOI: 10.1063/1.4804376  

    ISSN:0003-6951

  60. Influence of sputter power and N-2 gas flow ratio on crystalline quality of AlN layers deposited at 823 K by RF reactive sputtering 査読有り

    Tomoyuki Kumada, Makoto Ohtsuka, Kazuya Takada, Hiroyuki Fukuyama

    PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 9, NO 3-4 9 (3-4) 515-518 2012年

    DOI: 10.1002/pssc.201100489  

    ISSN:1862-6351

    eISSN:1610-1642

  61. Influence of sputtering conditions on crystalline quality of AlN layers deposited by RF reactive sputtering 査読有り

    Tomoyuki Kumada, Makoto Ohtsuka, Kazuya Takada, Hiroyuki Fukuyama

    PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 8, NO 5 8 (5) 1520-1523 2011年

    DOI: 10.1002/pssc.201000890  

    ISSN:1862-6351

    eISSN:1610-1642

  62. Titanium Doped ITO Thin Films Produced by Sputtering Method 査読有り

    Leandro Voisin, Makoto Ohtsuka, Takashi Nakamura

    MATERIALS TRANSACTIONS 51 (3) 503-509 2010年3月

    DOI: 10.2320/matertrans.MBW200907  

    ISSN:1345-9678

    eISSN:1347-5320

  63. Magnetic anisotropies in Ni-Mn-Ga films on MgO(001) substrates 査読有り

    V. A. Chernenko, V. Golub, J. M. Barandiaran, O. Y. Salyuk, F. Albertini, L. Righi, S. Fabbrici, M. Ohtsuka

    Applied Physics Letters 96 (4) 042502-1-042502-3 2010年1月

    DOI: 10.1063/1.3293455  

    ISSN:0003-6951

  64. Imprinting Bias Stress in Functional Composites 査読有り

    Vladimir Khovaylo, Gor Lebedev, Dmitry Zakharov, Victor Koledov, Evgeniy Perov, Vladimir Shavrov, Makoto Ohtsuka, Vladimir Pushin, Hiroyuki Miki, Toshiyuki Takagi

    JAPANESE JOURNAL OF APPLIED PHYSICS 49 (10) 100212-1-100212-3 2010年

    DOI: 10.1143/JJAP.49.100212  

    ISSN:0021-4922

    eISSN:1347-4065

  65. Magnetocaloric effect linked to the martensitic transformation in sputter-deposited Ni-Mn-Ga thin films 査読有り

    V. Recarte, J. I. Perez-Landazabal, V. Sanchez-Alarcos, V. A. Chernenko, M. Ohtsuka

    Applied Physics Letters 95 (14) 141908-1-141908-3 2009年10月

    DOI: 10.1063/1.3246149  

    ISSN:0003-6951

    eISSN:1077-3118

  66. Intrinsic position sensing of a Ni-Mn-Ga microactuator 査読有り

    D. Auernhammer, M. Kohl, B. Krevet, M. Ohtsuka

    Smart Materials and Structures 18 (10) 104016-1-104016-7 2009年9月10日

    DOI: 10.1088/0964-1726/18/10/104016  

    ISSN:0964-1726 1361-665X

    eISSN:1361-665X

  67. Ferromagnetic resonance properties and anisotropy of Ni-Mn-Ga thin films of different thicknesses deposited on Si substrate 査読有り

    Vladimir Golub, K. M. Reddy, Volodymyr Chernenko, Peter Muellner, Alex Punnoose, Makoto Ohtsuka

    JOURNAL OF APPLIED PHYSICS 105 (7) 07A942-1-07A942-3 2009年4月

    DOI: 10.1063/1.3075395  

    ISSN:0021-8979

  68. Intrinsic position sensing of a Ni-Mn-Ga microactuator 査読有り

    Daniel Auernhammer, Manfred Kohl, Berthold Krevet, Makoto Ohtsuka

    SMASIS2008: PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS - 2008, VOL 1 265-271 2009年

    ISSN:2153-2001

  69. Influence of sputtering parameters on the crystallinity and crystal orientation of AlN layers deposited by RF sputtering using the AlN target 査読有り

    Z. Vashaei, T. Aikawa, M. Ohtsuka, H. Kobatake, H. Fukuyama, S. Ikeda, K. Takada

    Journal of Crystal Growth 311 (3) 459-462 2009年1月

    DOI: 10.1016/j.jcrysgro.2008.09.046  

    ISSN:0022-0248

  70. MFM Domain Imaging of Textured Ni-Mn-Ga/MgO(100) Thin Films 査読有り

    Volodymyr A. Chernenko, Ricardo Lopez Anton, Jose M. Barandiaran, Inaki Orue, Stefano Besseghini, Makoto Ohtsuka, Andrea Gambardella

    IEEE TRANSACTIONS ON MAGNETICS 44 (11) 3040-3043 2008年11月

    DOI: 10.1109/TMAG.2008.2001652  

    ISSN:0018-9464

    eISSN:1941-0069

  71. Variation of atomic spacing and thermomechanical properties in Ni-Mn-Ga/alumina film composites 査読有り

    Stefano Besseghini, Tornmaso Cavallin, Volodymyr Chernenko, Elena Villa, Victor Lvov, Makoto Ohtsuka

    ACTA MATERIALIA 56 (8) 1797-1801 2008年5月

    DOI: 10.1016/j.actamat.2007.12.025  

    ISSN:1359-6454

  72. Effects of Fe and Co addition on the magnetoresistance in Ni-Mn-Ga films 査読有り

    K. Koike, M. Ohtsuka, M. Matsumoto, Y. Adachi, T. Takagi, H. Kato

    EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS 158 (1) 143-148 2008年5月

    DOI: 10.1140/epjst/e2008-00667-1  

    ISSN:1951-6355

    eISSN:1951-6401

  73. Magnetostructural phase transformation and shape memory effect of Fe-added Ni(2)MnGa films 国際誌 査読有り

    Makoto Ohtsuka, Junpei Sekino, Keiichi Koyama, Toshiyuki Takagi, Kimio Itagaki

    The European Physical Journal, Special Topics 158 (1) 173-178 2008年5月

    DOI: 10.1140/epjst/e2008-00672-4  

    ISSN:1951-6355

    eISSN:1951-6401

  74. Transformation behavior of Ni-Mn-Ga/Si(100) thin film composites with different film thicknesses 査読有り

    S. Besseghini, A. Gambardella, V. A. Chernenko, M. Hagler, C. Pohl, P. M. Muellner, M. Ohtsuka, S. Doyle

    The European Physical Journal, Special Topics 158 (1) 179-185 2008年5月

    DOI: 10.1140/epjst/e2008-00673-3  

    ISSN:1951-6355

    eISSN:1951-6401

  75. NiMnGa Nanostructures Produced by Electron Beam Lithography and Ar-Ion Etching 査読有り

    D. Auernhammer, M. Schmitt, M. Ohtsuka, M. Kohl

    The European Physical Journal, Special Topics 158 (1) 249-254 2008年5月

    DOI: 10.1140/epjst/e2008-00683-1  

    ISSN:1951-6355

    eISSN:1951-6401

  76. Properties of sputter-deposited Ni-Mn-Ga thin films 査読有り

    Volodymyr A. Chernenko, Stefano Besseghini, Michael Hagler, Peter Muellner, Makoto Ohtsuka, Francesco Stortiero

    Materials Science and Engineering A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 481-482 (1-2 C) 271-274 2008年5月

    DOI: 10.1016/j.msea.2006.12.206  

    ISSN:0921-5093

  77. Influence of Cobalt on Phase Transitions in Ni50Mn37Sn13 査読有り

    Vladimir Vasilievich Khovaylo, Viktor Viktorovich Koledov, Vladimir Grigor''evich Shavrov, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi, Valentin Novosad

    Materials Science and Engineering A - STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 481-482 (1-2 C) 322-325 2008年5月

    DOI: 10.1016/j.msea.2006.12.235  

    ISSN:0921-5093

  78. Residual stress in Ni-Mn-Ga thin films deposited on different substrates 査読有り

    Stephen Doyle, Volodymyr A. Chernenko, Stefano Besseghini, Andrea Gambardella, Manfred Kohl, Peter Muellner, Makoto Ohtsuka

    The European Physical Journal, Special Topics 158 (1) 99-105 2008年5月

    DOI: 10.1140/epjst/e2008-00660-8  

    ISSN:1951-6355

    eISSN:1951-6401

  79. Martensitic transformation and shape memory effect under magnetic field for Ni2MnGa sputtered films containing iron 国際誌 査読有り

    Makoto Ohtsuka, Hiroyuki Katsuyama, Minoru Matsumoto, Toshiyuki Takagi, Kimio Itagaki

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 481 (1-2 C) 275-278 2008年5月

    DOI: 10.1016/j.msea.2006.11.187  

    ISSN:0921-5093

  80. Magnetization and domain patterns in martensitic NiMnGa films on Si(100) wafer 査読有り

    V. A. Chernenko, R. Lopez Anton, S. Besseghini, J. M. Barandiaran, M. Ohtsuka, A. Gambardella, P. Müllner

    Advanced Materials Research 52 35-43 2008年

    出版者・発行元: Trans Tech Publications, Ltd.

    DOI: 10.4028/0-87849-370-0.35  

    ISSN:1022-6680

    eISSN:1662-8985

  81. Effect of bias sputtering condition on structure of LaNi5 films 査読有り

    Kenta Nakakado, Makoto Ohtsuka, Yusuke Ayame, Kimio Itagaki

    MATERIALS TRANSACTIONS 48 (4) 832-835 2007年4月

    DOI: 10.2320/matertrans.48.832  

    ISSN:1345-9678

    eISSN:1347-5320

  82. Magnetic susceptibility of martensitic Ni-Mn-Ga film 査読有り

    Volodymyr A. Chernenko, Michael Hagler, Peter Mullner, Volodymyr M. Kniazkyi, Victor A. L'vov, Makoto Ohtsuka, Stefano Besseghini

    JOURNAL OF APPLIED PHYSICS 101 (5) 053909-1-053909-6 2007年3月

    DOI: 10.1063/1.2464188  

    ISSN:0148-6055

    eISSN:1520-8516

  83. Martensitic transformation and shape memory effect of Ni-rich Ni2MnGa sputtered films under magnetic field 国際誌 査読有り

    M. Ohtsuka, M. Matsumoto, K. Koike, T. Takagi, K. Itagaki

    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 310 (2) 2782-2784 2007年3月

    DOI: 10.1016/j.jmmm.2006.10.1048  

    ISSN:0304-8853

  84. Magnetoresistance of Ni-Mn-Ga-Fe ferromagnetic shape memory. lms 査読有り

    K. Koike, M. Ohtsuka, Y. Honda, H. Katsuyama, M. Matsumoto, K. Itagaki, Y. Adachi, H. Morita

    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 310 (2) E996-E998 2007年3月

    DOI: 10.1016/j.jmmm.2006.10.1047  

    ISSN:0304-8853

  85. A ferromagnetic shape memory actuator designed for large 2D optical scanning 査読有り

    M. Kohl, D. Brugger, M. Ohtsuka, B. Krevet

    SENSORS AND ACTUATORS A-PHYSICAL 135 (1) 92-98 2007年3月

    DOI: 10.1016/j.sna.2006.08.014  

    ISSN:0924-4247

  86. Texture of submicron Ni-Mn-Ga films studied by X-ray diffraction at the ANKA synchrotron source

    V. A. Chernenko, S. Doyle, M. Kohl, P. Müllner, S. Besseghini, M. Ohtsuka

    Zeitschrift fur Kristallographie, Supplement 2 (26) 229-234 2007年

    DOI: 10.1524/zksu.2007.2007.suppl_26.229  

    ISSN:0930-486X

  87. Texture of submicron Ni-Mn-Ga films studied by X-ray diffraction at the ANKA synchrotron source 査読有り

    V. A. Chernenko, S. Doyle, M. Kohl, P. Muellner, S. Besseghini, M. Ohtsuka

    ZEITSCHRIFT FUR KRISTALLOGRAPHIE 26 229-234 2007年

    ISSN:0044-2968

  88. Shape memory effect and magnetostriction in polycrystalline Ni-Mn-Ga thin film microactuators 国際誌 国際共著 査読有り

    M. Kohl, A. Agarwal, V. A. Chernenko, M. Ohtsuka, K. Seemann

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 438 (SPEC. ISS.) 940-943 2006年12月

    DOI: 10.1016/j.msea.2006.02.062  

    ISSN:0921-5093

  89. Thickness dependence of transformation characteristics of Ni-Mn-Ga thin films deposited on alumina: Experiment and modeling 国際誌 国際共著 査読有り

    V. A. Chernenko, M. Kohl, M. Ohtsuka, T. Takagi, V. A. L'vov, V. M. Kniazkyi

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 438 (SPEC. ISS.) 944-947 2006年12月

    DOI: 10.1016/j.msea.2006.02.055  

    ISSN:0921-5093

  90. Structural and magnetic characterization of martensitic Ni-Mn-Ga thin films deposited on Mo foil 査読有り

    V. A. Chernenko, R. Lopez Anton, M. Kohl, J. M. Barandiaran, M. Ohtsuka, I. Orue, S. Besseghini

    ACTA MATERIALIA 54 (20) 5461-5467 2006年12月

    DOI: 10.1016/j.actamat.2006.06.058  

    ISSN:1359-6454

  91. Two-way shape memory behavior of sputter-deposited Ni-rich Ni2MnGa films 国際誌 査読有り

    Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES 17 (12) 1069-1074 2006年12月

    DOI: 10.1177/1045389X06064606  

    ISSN:1045-389X

    eISSN:1530-8138

  92. Effect of iron and cobalt addition on magnetic and shape memory properties of Ni2MnGa sputtered films 国際誌 査読有り

    Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 438 (SPEC. ISS.) 935-939 2006年12月

    DOI: 10.1016/j.msea.2006.02.153  

    ISSN:0921-5093

  93. Texture and transformation characteristics of Ni-Mn-Ga films deposited on alumina 査読有り

    Chernenko, V, M Kohl, S Doyle, P Mullner, M Ohtsuka

    SCRIPTA MATERIALIA 54 (7) 1287-1291 2006年4月

    DOI: 10.1016/j.scriptamat.2005.12.020  

    ISSN:1359-6462

  94. Ni-Mn-Sn: Novel Ferromagnetic Shape Memory Alloys 査読有り

    Vladimir V. Khovailo, Viktor V. Koledov, Vladimir G. Shavrov, A. Korolyov, Makoto Ohtsuka, O. Savel'eva, Toshiyuki Takagi

    Functional Materials 13 (3) 474-477 2006年4月

  95. Martensitic transformation and microstructure of sputter-deposited Ni-Mn-Ga films 査読有り

    Volodymyr A. Chernenko, Manfred Kohl, Victor A. L'vov, Volodymyr M. Kniazkyi, Makoto Ohtsuka, Oliver Kraft

    MATERIALS TRANSACTIONS 47 (3) 619-624 2006年3月

    DOI: 10.2320/matertrans.47.619  

    ISSN:1345-9678

    eISSN:1347-5320

  96. Ferromagnetic shape memory microactuators 査読有り

    Manfred Kohl, Berthold Krevet, Makoto Ohtsuka, Daniel Brugger, Yong Liu

    MATERIALS TRANSACTIONS 47 (3) 639-644 2006年3月

    DOI: 10.2320/matertrans.47.639  

    ISSN:1345-9678

    eISSN:1347-5320

  97. Magnetic-field induced two-way shape memory effect of ferromagnetic Ni2MnGa sputtered films 査読有り

    Makoto Ohtsuka, Yuya Konno, Minoru Matsumoto, Toshiyuki Takagi, Kimio Itagaki

    MATERIALS TRANSACTIONS 47 (3) 625-630 2006年3月

    DOI: 10.2320/matertrans.47.625  

    ISSN:1345-9678

    eISSN:1347-5320

  98. Phase transitions in Ni2+xMn1-xGa with a high Ni excess 査読有り

    VV Khovaylo, VD Buchelnikov, R Kainuma, VV Koledov, M Ohtsuka, VG Shavrov, T Takagi, SV Taskaev, AN Vasiliev

    PHYSICAL REVIEW B 72 (22) 224408-1-224408-10 2005年12月

    DOI: 10.1103/PhysRevB.72.224408  

    ISSN:1098-0121

    eISSN:1550-235X

  99. Phase relations in the Ni-Mn-Ga ternary system and aging effect on shape memory properties of ferromagnetic Ni2MnGa sputtered films 査読有り

    M Ohtsuka, C Wedel, K Itagaki

    MONATSHEFTE FUR CHEMIE 136 (11) 1909-1914 2005年11月

    DOI: 10.1007/s00706-005-0382-z  

    ISSN:0026-9247

  100. Transformation behavior of Ni-Mn-Ga thin films 査読有り

    VA Chernenko, M Ohtsuka, M Kohl, VV Khovailo, T Takagi

    SMART MATERIALS & STRUCTURES 14 (5) S245-S252 2005年10月

    DOI: 10.1088/0964-1726/14/5/012  

    ISSN:0964-1726

  101. Magnetic domains in Ni-Mn-Ga martensitic thin films 査読有り

    VA Chernenko, RL Anton, M Kohl, M Ohtsuka, Orue, I, JM Barandiaran

    JOURNAL OF PHYSICS-CONDENSED MATTER 17 (34) 5215-5224 2005年8月

    DOI: 10.1088/0953-8984/17/34/006  

    ISSN:0953-8984

  102. Effects of Composition and Structure on Mechanical Properties of Polycrystalline Ni2MnGa Alloy 査読有り

    Hiroyuki Ogasawara, Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    Transaction of the Materials Research Society of Japan 29 (7) 3029-3032 2004年11月

  103. Relation between Composition and Shape Memory Effect of the Sputtered Films of Ferromagnetic Shape Memory Alloy Ni2MnGa 査読有り

    Yuya Konno, Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    Transaction of the Materials Research Society of Japan 29 (7) 3033-3036 2004年11月

  104. Development of High-temperature Shape Memory Alloys Ni2+xMn1-xGa System 査読有り

    Vladimir V. Khovailo, Toshihiko Abe, Toshiyuki Takagi, Makoto Ohtsuka, Minoru Matsumoto

    Transactions of the Materials Research Society of Japan 29 (7) 3063-3066 2004年11月

  105. A novel actuation mechanism on the basis of ferromagnetic SMA thin films 査読有り

    M Kohl, D Brugger, M Ohtsuka, T Takagi

    SENSORS AND ACTUATORS A-PHYSICAL 114 (2-3) 445-450 2004年9月

    DOI: 10.1016/j.sna.2003.11.006  

    ISSN:0924-4247

  106. Magnetic-field induced shape memory effect in Ni2MnGa sputtered films 国際誌 査読有り

    M Ohtsuka, M Sanada, M Matsumoto, K Itagaki

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 378 (1-2) 377-383 2004年7月

    DOI: 10.1016/j.msea.2003.11.077  

    ISSN:0921-5093

  107. SMA microactuators for microvalve applications 国際誌 国際共著 査読有り

    M Kohl, Y Liu, B Krevet, S Durr, M Ohtsuka

    JOURNAL DE PHYSIQUE IV 115 333-342 2004年6月

    DOI: 10.1051/jp4:2004115039  

    ISSN:1155-4339

    eISSN:1764-7177

  108. Effect of Cobalt Addition on Shape Memory Properties of Ferromagnetic Ni-Mn-Ga Sputtered Films 査読有り

    Yoshiharu Katano, Makoto Ohtsuka, Minoru Matsumoto, Kunihiro Koike, Kimio Itagaki

    Materials Transactions 45 (2) 350-352 2004年

    出版者・発行元: Japan Institute of Metals (JIM)

    DOI: 10.2320/matertrans.45.350  

    ISSN:1345-9678

  109. Magnetic-field Controlled Two-way Shape Memory Effect of Ni2MnGa Sputtered Films 査読有り

    Masaki Sanada, Makoto Ohtsuka, Minoru, Matsumoto, Toshiyuki Takagi, Kimio Itagaki

    Transactions of the Materials Research Society of Japan 28 (5) 663-666 2003年4月

  110. Two-way Shape Memory Behavior of Ni2MnGa Sputtered Films 国際誌 査読有り

    Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    Transactions of the Materials Research Society of Japan 28 (5) 659-662 2003年4月

  111. Two-way shape memory effect of ferromagnetic Ni-Mn-Ga sputter-deposited films 国際誌 査読有り

    M. Ohtsuka, M. Matsumoto, K. Itagaki

    Metallurgical and Materials Processing : Principles and Technologies 1 1213-1226 2003年

  112. Magnetic domain structure in Ni53.6Mn23.4Ga23.0 shape memory alloy films studied by electron holography and Lorentz microscopy 国際誌 査読有り

    Y Murakami, D Shindo, A Suzuki, A Ohtsuka, K Itagaki

    ACTA MATERIALIA 51 (2) 485-494 2003年1月

    DOI: 10.1016/S1359-6454(02)00431-7  

    ISSN:1359-6454

    eISSN:1873-2453

  113. Influence of Fe and Co on phase transitions in Ni-Mn-Ga alloys 国際誌 国際共著 査読有り

    Vladimir V. Khovailo, Toshihiko Abe, Viktor V. Koledov, Minoru Matsumoto, Hirokazu Nakamura, Ryunosuke Note, Makoto Ohtsuka, Vladimir G. Shavrov, Toshiyuki Takagi

    Materials Transactions 44 (12) 2509-2512 2003年

    出版者・発行元: Japan Institute of Metals (JIM)

    DOI: 10.2320/matertrans.44.2509  

    ISSN:1345-9678

  114. Shape memory behavior of Ni-Mn-Ga sputtered films under a magnetic field 国際誌 査読有り

    Makoto Ohtsuka, Masaki Sanada, Minoru Matsumoto, Toshiyuki Takagi, Kimio Itagaki

    Materials Transactions 44 (12) 2513-2519 2003年

    出版者・発行元: Japan Institute of Metals (JIM)

    DOI: 10.2320/matertrans.44.2513  

    ISSN:1345-9678

  115. Effect of aging time on shape memory properties of sputtered Ni-rich Ni2MnGa alloy films 査読有り

    Motohiko Suzuki, Makoto Ohtsuka, Minoru Matsumoto, Yasukazu Murakami, Daisuke Shindo, Kimio Itagaki

    Materials Transactions 43 (5) 861-866 2002年5月

    DOI: 10.2320/matertrans.43.861  

    ISSN:1345-9678

  116. Two-way Shape Memory Effect of Sputtered Ni-rich Ni2MnGa Films 国際誌 査読有り

    Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    Transactions of the Materials Research Society of Japan 26 (1) 201-204 2001年4月

  117. Phase Transformation of Sputtered Ni-richi Ni2MnGa Films 査読有り

    Kiyoshi Ohi, Shinji Isokawa, Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    Transactions of the Materials Research Society of Japan 26 (1) 291-294 2001年4月

  118. Fabrication and Characterization of Hydrogen Absorption LaNi5 Alloy Films Sputtered on Nickel Substrate 国際誌 査読有り

    Makoto Ohtsuka, Yoshihiko Takeda, Tadayuki Kobayashi, Kimio Itagaki

    Zeitschrift für Metallkunde 92 (10) 1134-1138 2001年4月

    出版者・発行元:

    ISSN:0044-3093

  119. Mechanical and shape memory properties of ferromagnetic Ni2+xMn1-xGa alloys 国際誌 査読有り

    T Takagi, Khovailo, V, T Nagatomo, M Matsumoto, M Ohtsuka, T Abe, H Miki

    APPLIED ELECTROMAGNETICS (III) 10 412-415 2001年

    ISSN:1343-2869

  120. Shape memory effect of sputtered Ni-rich Ni2MnGa alloy films aged in constraint condition 国際誌 査読有り

    S. Isokawa, M. Suzuki, M. Ohtsuka, M. Matsumoto, K. Itagaki

    Materials Transactions 42 (9) 1886-1889 2001年

    出版者・発行元: Japan Institute of Metals (JIM)

    DOI: 10.2320/matertrans.42.1886  

    ISSN:1345-9678

  121. Effect of heat treatment on properties of Ni-Mn-Ga films prepared by a sputtering method 査読有り

    M. Ohtsuka, K. Itagaki

    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS 12 (1-2) 49-59 2000年

    DOI: 10.3233/jae-2000-194  

    ISSN:1383-5416

  122. Fabrication and characterization of sputtered Ni2MnGa thin films 国際誌 査読有り

    Masaya Suzuki, Makoto Ohtsuka, Takanobu Suzuki, Minoru Matsumoto, Hiroyuki Miki

    Materials Transactions, JIM 40 (10) 1174-1177 1999年

    出版者・発行元: Japan Institute of Metals (JIM)

    DOI: 10.2320/matertrans1989.40.1174  

    ISSN:0916-1821

  123. Zr-Ni-Mn3元系合金の組織と水素吸蔵特性 査読有り

    大塚 誠, 山内 輝和, 板垣 乙未生

    日本金属学会誌 61 (8) 774-780 1997年8月20日

    DOI: 10.2320/jinstmet1952.61.8_774  

    ISSN:0021-4876

    eISSN:1880-6880

  124. Creep behavior and substructures of alpha2 Ti-34mol%Al intermetallics 査読有り

    Y Nagae, T Fukuda, M Ohtsuka, H Sato, H Oikawa

    INTERMETALLICS 5 (4) 321-328 1997年

    DOI: 10.1016/S0966-9795(96)00096-9  

    ISSN:0966-9795

  125. Formation of RExNiy (RE = La, Ce, Pr or ND) compounds by calciothermic reduction of La2O3, CeO2, Pr6O11 and Nd2O3 査読有り

    M. Ohtsuka, D. Y. Kim, K. Itagaki

    Journal of Alloys and Compounds 230 (1) 46-52 1995年11月15日

    DOI: 10.1016/0925-8388(95)01885-9  

    ISSN:0925-8388

  126. Heat content and heat of formation measurements of RNix alloys (R ≡ La, Ce, Pr or Nd) and heat balance in a reduction-diffusion process

    K. Yamaguchi, D. Y. Kim, M. Ohtsuka, K. Itagaki

    Journal of Alloys and Compounds 221 (1-2) 161-168 1995年4月

    DOI: 10.1016/0925-8388(94)01422-1  

    ISSN:0925-8388

    eISSN:1873-4669

  127. Ni-RE(RE=Ce,Pr,Nd)2元系合金の反応拡散に関する研究 査読有り

    金 徳寧, 大塚 誠, 板垣 乙未生

    資源と素材 110 (2) p95-101 1994年2月

    出版者・発行元: 資源・素材学会

    ISSN:0916-1740

  128. Creep Behavior and Substructures of alpha2-Ti-27 mol%Al Intermetallics 査読有り

    M. OHTSUKA, T. FUKUDA, H. OIKAWA

    STRENGTH OF MATERIALS 733-736 1994年

  129. Reactive diffusion in Ni - RE (RE = Ce, Pr, Nd) binary alloys

    Kim, Deog-Yung, Ohtsuka, Makoto, Itagaki, Kimio

    Metallurgical Review of MMIJ (Mining and Metallurgical Institute of Japan) 10 (1) 25-45 1993年9月1日

    ISSN:0289-6214

  130. ニッケル-ランタン2元系合金の反応拡散に関する研究 (素材小特集-4-界面反応と材料特性) 査読有り

    金 悳寧, 大塚 誠, 板垣 乙未生

    資源と素材 108 (12) p873-878 1992年12月

    出版者・発行元: 資源・素材学会

    ISSN:0916-1740

  131. Study on Reactive Diffusion in the Nickel-Lanthanum Binary Alloy. 査読有り

    Deog-Yung KIM, Makoto OHTSUKA, Kimio ITAGAKI

    Metallurgical Review of MMIJ 9 (2) 1-17 1992年4月

︎全件表示 ︎最初の5件までを表示

MISC 208

  1. 浮遊法を用いたCu2SおよびFeS融体の熱物性測定

    安達正芳, 正岡諒也, 大塚誠, 渡邉匡人, 高橋純一, 福山博之

    資源・素材(Web) 2021 2021年

  2. 金属素描 No. 10 インジウム (Indium) [in Japanese]

    大塚 誠

    まてりあ 59 (7) 351-351 2020年7月1日

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.59.351  

    ISSN: 1340-2625

    eISSN: 1884-5843

  3. 思い出の教科書,この一冊! “初級金属学”

    大塚 誠

    まてりあ 59 (5) 266-266 2020年5月1日

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.59.266  

    ISSN: 1340-2625

    eISSN: 1884-5843

  4. 企画にあたって 特集「材料組織形成における計算材料科学の最前線」

    大塚 誠, 杉浦 夏子, 高山 直樹, 寺本 武司, 徳永 透子, 山本 剛久, 木口 賢紀

    まてりあ 59 (3) 127-127 2020年3月1日

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.59.127  

  5. Fe-Al融液からのAlN結晶成長のその場観察

    山形武史, 安達正芳, 大塚誠, 福山博之

    材料とプロセス(CD-ROM) 33 (1) 2020年

    ISSN: 1882-8922

  6. ガスジェット浮遊技術を用いたCu2S融体の熱物性測定

    安達正芳, 後藤宏樹, 大塚誠, 渡邉匡人, 高橋純一, 福山博之

    資源・素材(Web) 2020 2020年

  7. 企画にあたって 連載「思い出の教科書,この一冊!」

    上田 恭介, 榎木 勝徳, 大塚 誠, 木口 賢紀, 齊藤 敬高, 竹田 修, 田中 秀明, 佃 諭志, 三井 好古, 宮崎 秀俊, 山本 剛久, 横山 賢一

    まてりあ 59 (1) 50-50 2020年1月1日

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.59.50  

    ISSN: 1340-2625

    eISSN: 1884-5843

  8. 静磁場印加電磁浮遊法を用いた溶融Co‐Cr‐Mo系合金の熱伝導率測定

    大塚誠, 高橋侑希, 小泉雄一郎, 趙宇凡, 千葉晶彦, 福山博之

    日本金属学会講演概要(CD-ROM) 164th ROMBUNNO.247 2019年3月6日

    ISSN: 2433-3093

  9. アクチュエータへの適用を目的とした形状記憶合金の材料改質 国際共著

    三木 寛之, 武田 翔, 大塚 誠, Marcel Gültig, Manfred Kohl, 小助川 博之, 高木 敏行

    M&M材料力学カンファレンス 2019 (0) OS2204-OS2204 2019年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemm.2019.os2204  

    eISSN: 2424-2845

  10. Cu2S融体の非接触熱物性測定

    安達正芳, 後藤宏基, 大塚誠, 高橋純一, 福山博之

    資源・素材(Web) 2019 ROMBUNNO.1K0401‐07‐03 (WEB ONLY) 2019年

  11. 溶融Ni‐Al合金の垂直分光放射率測定

    山片裕司, 大塚誠, 安達正芳, 福山博之

    Thermophysical Properties 39th 64‐66 2018年11月13日

    ISSN: 0911-1743

  12. 2波長反射率比法による電磁浮遊液滴の放射率フリー温度測定

    岩渕将也, 大塚誠, 福山博之, 小畠秀和, 笹嶋尚彦, 山田善郎

    Thermophysical Properties 39th 76‐78 2018年11月13日

    ISSN: 0911-1743

  13. Ni‐Mn‐X(X=Ga,In)強磁性形状記憶合金膜の高機能化と新規デバイスへの展開

    大塚誠

    日本金属学会講演概要(CD-ROM) 163rd ROMBUNNO.507 2018年9月5日

    ISSN: 2433-3093

  14. 静磁場印加電磁浮遊法を用いた溶融Co‐Cr‐Mo系合金の垂直分光放射率および定圧モル熱容量測定

    高橋侑希, 大塚誠, 小泉雄一郎, 趙宇凡, 千葉晶彦, 福山博之

    日本金属学会講演概要(CD-ROM) 163rd ROMBUNNO.126 2018年9月5日

    ISSN: 2433-3093

  15. 電磁浮遊法を用いた溶融Ni‐AlからのAlN生成その場観察

    安達正芳, 浜谷苑子, 山片裕司, 大塚誠, 福山博之

    応用物理学会春季学術講演会講演予稿集(CD-ROM) 65th ROMBUNNO.18p‐E202‐8 2018年3月5日

  16. Co‐Cr‐Mo系合金の液相線温度と溶融状態における密度の評価

    高橋侑希, 大塚誠, 小泉雄一郎, 趙宇凡, 千葉晶彦, 福山博之

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.S2.18 2018年3月5日

    ISSN: 2433-3093

  17. 黒体放射を用いた熱分析法による10mol%TiC含有Moss‐T2‐TiC合金の高温状態図の検討

    澤田龍伍, 中島治樹, 大塚誠, 宮田龍一, 吉見享祐, 福山博之

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.16 2018年3月5日

    ISSN: 2433-3093

  18. 2波長反射率比法による電磁浮遊金属液滴の温度測定

    岩渕将也, 黒川佑馬, 小畠秀和, 大塚誠, 福山博之, 笹嶋尚彦, 山口祐, 山田善郎

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.P48 2018年3月5日

    ISSN: 2433-3093

  19. 静磁場印加電磁浮遊法を用いたMoss初晶MoSiBTiC合金浮遊液滴の凝固組織

    大塚誠, 中島治樹, 澤田龍伍, 宮田龍一, 吉見享祐, 福山博之

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.15 2018年3月5日

    ISSN: 2433-3093

  20. MIniature-Scale Energy GeneraTion by Magnetic Shape MemoRy ALloys

    Manfred KOHL, Hiroyuki MIKI, Mickaël Lallart, Marcel GUELTIG, Makoto OHTSUKA

    ELyT Workshop 2018, 9th annual workshop 2018年3月

  21. Ni‐C共晶点による分光器の校正と溶融Ni‐Al合金の垂直分光放射率測定

    山片裕司, 大塚誠, 安達正芳, 福山博之

    材料とプロセス(CD-ROM) 31 (1) ROMBUNNO.39 2018年3月1日

    ISSN: 1882-8922

  22. 静磁場印加電磁浮遊法を用いた溶融Ti‐6Al‐4V合金の密度・蒸発速度測定

    船田卓, 大塚誠, 福山博之

    材料とプロセス(CD-ROM) 31 (1) ROMBUNNO.40 2018年3月1日

    ISSN: 1882-8922

  23. Application of Dual-Wavelength Reflectance-Ratio Method to Electromagnetic Levitated Liquid Metals 査読有り

    M. Iwabuchi, Y. Kurokawa, H. Kobatake, M. Ohtsuka, H. Fukuyama, Y. Yamaguchi, N. Sasajima, Y. Yamada

    Proc. SICE Ann. Conf. 161-1--3 2018年

  24. 企画にあたって ミニ特集「金属系材料の超精密3次元積層造形技術の最前線」

    梅津 理恵, 大塚 誠, 寺西 亮

    まてりあ 56 (12) 685-685 2017年12月

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.56.685  

    ISSN: 1340-2625

  25. Improvement in Magnetic Properties of Metamagnetic Shape Memory Alloy Processed by Compression Shearing Method at Room Temperature 査読有り

    Hiroyuki Miki, Koki Tsuchiya, Eijiro Abe, Sho Takeda, Makoto Ohtsuka, Marcel Gueltig, Manfred Kohl, Toshiyuki Takagi

    14th International Conference on Flow Dynamics (ICFD 2017) 664-665 2017年11月1日

  26. 黒体放射を用いた超高温熱分析法によるMoSiBTiC合金の状態図作成

    澤田龍伍, 中島治樹, 大塚誠, 福山博之, 吉見享祐

    日本金属学会講演概要(CD-ROM) 161st ROMBUNNO.S1.20 2017年8月23日

    ISSN: 2433-3093

  27. MARTENSITIC TRANSFORMATION AND MAGNETIC PROPERTIES IN

    Shevyrtalov S, Miki H, Ohtsuka M, Mashirov A, Grunin A, Lyatun I, Seredina M, Khovaylo V, Rodionova V

    Moscow International Symposium on Magnetism Book of Abstracts 842 2017年7月4日

  28. 社会・産業からの要求に応える電子・情報材料を目指して

    藤枝 俊, 大塚 誠, 村石 信二, 山室 佐益, 梅津 理恵, 大場 洋次郎, 寺西 亮

    まてりあ 56 (3) 180-180 2017年3月

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.56.180  

    ISSN: 1340-2625

    eISSN: 1884-5843

  29. 黒体放射を用いた超高温熱分析装置の開発とMo系合金への適用

    澤田龍伍, 中島治樹, 大塚誠, 福山博之, 富樫陽色, 吉見享祐

    日本金属学会講演概要(CD-ROM) 160th ROMBUNNO.P83 2017年3月1日

    ISSN: 2433-3093

  30. 溶融MoSiBTiC合金の冷却過程における多段階復熱現象と凝固組織の関係

    中島治樹, 大塚誠, 福山博之, 富樫陽色, 吉見享祐

    日本金属学会講演概要(CD-ROM) 160th ROMBUNNO.62 2017年3月1日

    ISSN: 2433-3093

  31. 2波長反射率比法による放射率フリー温度計測の高温球状金属への適用

    黒川佑馬, 大塚誠, 福山博之, 小畠秀和, 山田善郎, 笹嶋尚彦, 山口祐

    日本金属学会東北支部研究発表大会予稿集 16th 33 2017年

  32. Application of Ni-Mn-In based Magnetic Shape Memory Alloy Plates for Energy Harvesting Device

    Hiroyuki Miki, Eijiro Abe, Sho Takeda, Makoto Ohtsuka, Marcel Gueltig, Manfred Kohl, Toshiyuki Takagi

    Proceedings of JSPS Core-to-Core Program 6th Workshop The 2nd NUAA Tohoku University Joint Symposium on Fluid Science, Aerospace Engineering and Smart Structure Technology 45-46 2016年10月11日

  33. 常温圧縮せん断法により作製されたNi‐Mn‐In系合金薄板材を利用した環境発電素子の特性向上のためのデバイス設計

    大塚誠, 阿部英次郎, 三木寛之, GUETIG Marcel, KOHL Manfred, 高木敏行

    日本金属学会講演概要(CD-ROM) 159th ROMBUNNO.S3.13 2016年9月7日

    ISSN: 2433-3093

  34. MoSiBTiC合金の液相線温度と溶融状態の密度に及ぼすTiC添加の影響

    中島治樹, 大塚誠, 東英生, 福山博之, 富樫陽色, 吉見享祐

    日本金属学会講演概要(CD-ROM) 159th ROMBUNNO.S1.36 2016年9月7日

    ISSN: 2433-3093

  35. Development of Ni-Mn-In Type Magnetic Shape Memory Alloy Thin Plate for Magnetically-Actuated Devices

    Hiroyuki Miki, Koki Tsuchiya, Eijiro Abe, Makoto Ohtsuka, Marcel Gueltig, Manfred Kohl, Toshiyuki Takagi

    5th International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA '16) 97-98 2016年9月5日

  36. Magnetic Shape Memory Films for Thermal Energy Harvesting

    Manfred Kohl, Marcel Gültig, Hiroyuki Miki, Makoto Ohtsuka, Toshiyuki Takagi, Hinnerk Ossmer

    5th International Conference on Ferromagnetic Shape Memory Alloys (ICFSMA '16) 95-96 2016年9月5日

  37. アルミナ炭素熱還元法を利用したAlN単結晶成長に及ぼすグラファイト添加量および反応温度の影響

    大塚誠, 藤原圭吾, 三宅秀人, 福山博之

    応用物理学会秋季学術講演会講演予稿集(CD-ROM) 77th ROMBUNNO.13a‐A21‐3 2016年9月1日

  38. MoSiBTiC合金の液相線温度の決定と静磁場印加電磁浮遊法による溶融状態の密度測定

    中島治樹, 東英生, 大塚誠, 福山博之, 富樫陽色, 吉見享祐

    日本金属学会講演概要(CD-ROM) 158th ROMBUNNO.280 2016年3月9日

    ISSN: 2433-3093

  39. アルミナ炭素熱還元法によるAlNバッファ層上へのAlN単結晶成長

    藤原圭吾, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 158th ROMBUNNO.135 2016年3月9日

    ISSN: 2433-3093

  40. 圧縮せん断法により作製されたNi‐Mn‐In系合金薄板材を利用した環境発電素子の特性向上

    大塚誠, 阿部英次郎, 三木寛之, GUETIG Marcel, KOHL Manfred, 高木敏行

    日本金属学会講演概要(CD-ROM) 158th ROMBUNNO.111 2016年3月9日

    ISSN: 2433-3093

  41. 溶融Ni‐Al合金の高精度密度測定と過剰体積の評価

    佐藤明香輪, 東英生, 安達正芳, 大塚誠, 福山博之

    材料とプロセス(CD-ROM) 29 (1) ROMBUNNO.69 2016年3月1日

    ISSN: 1882-8922

  42. 146 動的加工法によるNi-Mn-In系磁性形状記憶合金薄板材の成型と環境発電素子への応用

    阿部 英次郎, 三木 寛之, 大塚 誠, 武田 翔, 高木 敏行

    東北支部総会・講演会 講演論文集 2016 (0) 89-90 2016年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmeth.2016.51.89  

  43. 動的加工法によるNi‐Mn‐In系磁性形状記憶合金薄板材の成型と環境発電素子への応用

    阿部英次郎, 三木寛之, 大塚誠, 武田翔, 高木敏行

    日本機械学会東北支部総会・講演会講演論文集(CD-ROM) 51st ROMBUNNO.146 2016年

  44. メタ磁性形状記憶合金粉末の圧縮せん断成形と環境発電素子適用の検討

    阿部英次郎, GUELTIG Marcel, OSSMER Hinnerk, KOHL Manfred, 三木寛之, 大塚誠, 高木敏行

    MAGDAコンファレンス講演論文集 24th 165-168 2015年11月12日

  45. Metamagnetic Shape Memory Alloy Plate for Energy Harvesting Device 査読有り

    Hiroyuki Miki, Koki Tsuchiya, Eijiro Abe, Makoto Ohtsuka, Marcel Gueltig, Hinnerk Ossmer, Manfred Kohl, Toshiyuki Takagi

    Twelfth International Conference on Flow Dynamics (ICFD 2015) 852-853 2015年10月27日

  46. 溶融Ni‐Al合金密度の温度及び組成依存性

    佐藤明香輪, 東英生, 安達正芳, 大塚誠, 福山博之

    Thermophysical Properties 36th 24-26 2015年10月19日

    ISSN: 0911-1743

  47. 溶融MoSiBTiC合金の静磁場中電磁浮遊と密度計測

    福山博之, 中島治樹, 東英生, 大塚誠, 富樫陽色, 吉見享祐

    日本金属学会講演概要(CD-ROM) 157th ROMBUNNO.409 2015年9月2日

    ISSN: 2433-3093

  48. Co添加Ni‐Mn‐In合金スパッタ膜を利用した環境発電素子の開発

    大塚誠, GUELTIG Marcel, KOHL Manfred, 阿部英次郎, 土屋光樹, 三木寛之, 高木敏行

    日本金属学会講演概要(CD-ROM) 157th ROMBUNNO.S4.18 2015年9月2日

    ISSN: 2433-3093

  49. Al2O3炭素熱還元法における炭素量の原料分解蒸発及びAlN結晶成長に及ぼす影響

    藤原圭吾, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 157th ROMBUNNO.P118 2015年9月2日

    ISSN: 2433-3093

  50. 静磁場印加電磁浮遊法による溶融Ni‐Al合金の密度測定

    佐藤明香輪, 大塚誠, 東英生, 福山博之

    材料とプロセス(CD-ROM) 28 (2) ROMBUNNO.63 2015年9月1日

    ISSN: 1882-8922

  51. Ni-Mn-In Type Magnetic Shape Memory Alloy Thin Plates for Magnetically Actuated Devices 招待有り

    Hiroyuki Miki, Koki Tsuchiya, Eijiro Abe, Makoto Ohtsuka, Marcel Gueltig, Hinnerk Ossmer, Manfred Kohl, Toshiyuki Takagi

    Proceedings of the 1st NUAA-Tohoku University Joint Symposium on Fluid Science, Aerospace Engineering and Smart Structure Technology 38 2015年6月21日

  52. Thermal Energy Harvesting by High Frequency Actuation of Magnetic Shape Memory Alloy Films 査読有り

    Marcel Gueltig, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi, Manfred Kohl

    18th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2015) 718-721 2015年6月1日

    DOI: 10.1109/TRANSDUCERS.2015.7181024  

  53. Thermal Energy Harvesting Based on Metamagnetic Shape Memory Alloys

    Marcel Gueltig, Miki, Hiroyuki, Makoto Ohtsuka, Toshiyuki Takagi, Manfred Kohl

    Book of Abstracts Energy, Science and Technology 2015 98 2015年5月20日

  54. 強磁性形状記憶合金スパッタ膜を利用した環境発電素子の開発

    大塚誠, GUELTIG Marcel, KOHL Manfred, 阿部英次郎, 三木寛之, 高木敏行

    日本金属学会講演概要(CD-ROM) 156th ROMBUNNO.1 2015年3月4日

    ISSN: 2433-3093

  55. Al2O3の炭素熱還元法における反応温度及び反応時間の影響

    藤原圭吾, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 156th ROMBUNNO.P17 2015年3月4日

    ISSN: 2433-3093

  56. 反応性パルスDCスパッタ法により作製されたAlN膜の結晶性および表面構造に及ぼすスパッタ電力の影響

    竹内洋仁, 大塚誠, 福山博之

    応用物理学会春季学術講演会講演予稿集(CD-ROM) 62nd ROMBUNNO.11A-B1-11 2015年2月26日

  57. 溶融Ni‐Al合金の密度と過剰体積

    佐藤明香輪, 東英夫, 安達正芳, 大塚誠, 福山博之

    東北大学多元物質科学研究所研究発表会講演予稿集 15th 33 2015年

  58. Ni-Mn-In type magnetic shape memory alloy free-standing film for magnetically actuated devices

    Hiroyuki Miki, Koki Tsuchiya, Eijiro Abe, Makoto Ohtsuka, Marcel Gueltig, Hinnerk Ossmer, Manfred Kohl, Toshiyuki Takagi

    26th International Conference on Adaptive Structures and Technologies, ICAST 2015 2015年1月1日

  59. Thermomagnetic Actuation by Low Hysteresis Metamagnetic Ni-Co-Mn-In Films 査読有り

    M. Gueltig, H. Ossmer, M. Ohtsuka, H. Miki, K. Tsuchiya, T. Takagi, M. Kohl

    Materials Today: Proceedings 2 (3) S883-S886 2015年

    出版者・発行元: Elsevier Ltd

    DOI: 10.1016/j.matpr.2015.07.423  

    ISSN: 2214-7853

    eISSN: 2214-7853

  60. Small Scale Energy Harvesting by Magnetic Shape Memory Alloys 査読有り

    Manfred Kohl, Ruizhi Yin, Hinnerk Ossmer, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi, Marcel Gueltig

    The 8th Energy, Materials, and Nanotechnology (EMN) Meeting Abstracts 150-151 2014年11月

    DOI: 10.1002/aenm.201400751  

  61. Structural and Transformational Properties of Ni46.4Mn38.8In12.8Co2 Thin Films

    Anna Kosogor, Maria Lyange, Michail Gorshenkov, Vladimir Khovaylo, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi

    IFS Collaborative Research Forum (AFI-2014) Proceedings 2014年10月8日

  62. Development of Energy Harvesting Devices based on Magnetic Shape Memory Alloy Thin Films 査読有り

    Marcel Gueltig, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi, Manfred Kohl

    Eleventh International Conference on Flow Dynamics (ICFD 2014) 280-281 2014年10月

  63. One-way Shape Memory Effect on Ferromagnetic Ni-Mn-In Based Alloy Solidified by Compression Shearing Method at Room Temperature 査読有り

    Eijiro Abe, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi

    Eleventh International Conference on Flow Dynamics (ICFD 2014) 538-539 2014年10月

  64. 圧縮せん断法により作製されたNi‐Mn‐In系合金薄板の磁気特性と形状記憶効果

    大塚誠, 阿部英次郎, 土屋光樹, 三木寛之, 高木敏行

    日本金属学会講演概要(CD-ROM) 155th ROMBUNNO.541 2014年9月10日

    ISSN: 2433-3093

  65. 窒化サファイア基板上Alスパッタ膜の高温窒化挙動その場観察

    藤原圭吾, 安達正芳, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 155th ROMBUNNO.214 2014年9月10日

    ISSN: 2433-3093

  66. 磁気デバイスのためのNi‐Mn‐In系合金形状記憶合金自立膜の開発

    三木寛之, 土屋光樹, 大塚誠, 高木敏行

    日本機械学会年次大会講演論文集(CD-ROM) 2014 ROMBUNNO.J0450203 2014年9月6日

  67. 反応性パルスDCスパッタ法により作製したAlN膜の表面構造および結晶性に及ぼすスパッタ圧力の影響

    竹内洋仁, 大塚誠, 福山博之

    応用物理学会秋季学術講演会講演予稿集(CD-ROM) 75th ROMBUNNO.17P-C5-15 2014年9月1日

  68. Ga‐Alフラックスを用いた液相成長法による低酸素分圧下でのAl極性AlN膜の作製

    関谷竜太, 安達正芳, 大塚誠, 杉山正史, 飯田潤二, 福山博之

    応用物理学会秋季学術講演会講演予稿集(CD-ROM) 75th ROMBUNNO.18P-C5-17 2014年9月1日

  69. 溶融SUS316,鉄およびニッケルの非接触密度測定

    渡邉学, 東英生, 佐々木美奈子, 安達正芳, 大塚誠, 福山博之, 西剛史, 山野秀将

    材料とプロセス(CD-ROM) 27 (2) ROMBUNNO.41 2014年9月1日

    ISSN: 1882-8922

  70. 強ひずみ加工によるNI‐MN‐IN系合金形状記憶合金板材の開発

    三木寛之, 阿部英次郎, 土屋光樹, 大塚誠, 高木敏行

    日本機械学会M&M材料力学カンファレンス(CD-ROM) 2014 ROMBUNNO.OS0906 2014年7月17日

  71. 磁気駆動素子のためのNi‐Mn‐In系合金形状記憶合金自立膜の開発

    土屋光樹, 大塚誠, 三木寛之, 高木敏行

    日本機械学会東北支部総会・講演会講演論文集(CD-ROM) 49th ROMBUNNO.163 2014年3月14日

  72. Co添加Ni‐Mn‐In磁性形状記憶合金自立膜の磁気特性と形状記憶効果

    大塚誠, 土屋光樹, 三木寛之, 高木敏行

    日本金属学会講演概要(CD-ROM) 154th ROMBUNNO.305 2014年3月7日

    ISSN: 2433-3093

  73. Al極性AlN膜基板上への低酸素分圧下におけるAlN膜液相成長

    関谷竜太, 安達正芳, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 154th ROMBUNNO.35 2014年3月7日

    ISSN: 2433-3093

  74. 窒化サファイア基板上へのAlN膜液相成長のその場観察

    藤原圭吾, 安達正芳, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 154th ROMBUNNO.P041 2014年3月7日

    ISSN: 2433-3093

  75. アルミナの炭素熱還元挙動

    福山博之, 加藤三香子, 大塚誠

    耐火物 66 (3) 130 2014年3月1日

    ISSN: 0039-8993

  76. OS0906 強ひずみ加工によるNI-MIN-IN系合金形状記憶合金板材の開発

    三木 寛之, 阿部 英次郎, 土屋 光樹, 大塚 誠, 高木 敏行

    M&M材料力学カンファレンス 2014 (0) _OS0906-1_-_OS0906-2_ 2014年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemm.2014._OS0906-1_  

    詳細を見る 詳細を閉じる

    Grained Co-added Ni-Mn-In alloy was solidified using Compression Shearing Method at Room Temperature method. As for the solidified material, crystal structure at room temperature and magnetic property were investigated. In the solidified material using a Ni_<45>Mn_<40>In_<15> target, both structural-phase and martensitic transition which are induced in connection with a temperature change were observed. It became clear that the solidified material has the similar characteristic as a Ni-Mn-In bulk alloy and a sputtered film.

  77. J0450203 磁気デバイスのためのNi-Mn-In系合金形状記憶合金自立膜の開発([JO45-02]知的材料・構造システム(2),機械材料・材料加工部門)

    三木 寛之, 土屋 光樹, 大塚 誠, 高木 敏行

    年次大会 2014 (0) _J0450203--_J0450203- 2014年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemecj.2014._J0450203-  

    詳細を見る 詳細を閉じる

    In this study, shape memory behavior on the Ni_<50.4>Co_<3.7>Mn_<32.8>In_<13.1> films is investigated for the practical application as a magnetically driven actuator device. The Ni_<50.4>Co_<3.7>Mn_<32 8>In_<13,1> films were fabricated by the sputtering and the films of 5 μm thickness were obtained by heat-treatment in two-step. The martensitic transformation (MT) temperatures of the film determined using the electric resistance measurement and the thermal hysteresis was smaller than 10 K. The magnetization experiments reveal the abrupt magnetization change ΔM of 26emu/g at 0.05T and the MT finishing temperature (M_f) change ΔM_f of -8.5 K at 5 T. The film showed the shape memory behavior of one-way SME by heating and applying magnetic field. For the Ni_<50.4>Co_<3.7>Mn_<32.8>In_<13.1>film, with increasing temperature, the decrease of elastic modulus and the increase of elongation were confirmed in martensitic phase from the result of tensile test.

  78. 163 磁気駆動素子のためのNi-Mn-In系合金形状記憶合金自立膜の開発

    土屋 光樹, 大塚 誠, 三木 寛之, 高木 敏行

    東北支部総会・講演会 講演論文集 2014 (0) 123-124 2014年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmeth.2014.49.123  

  79. Magnetic, magnetooptical and magnetotransport properties of Ti-substituted Co2FeGa thin films 査読有り

    Vladimir Khovaylo, Valeria Rodionova, Maria Lyange, Ksenia Chichay, Elena Gan'shina, Andrey Novikov, Georgy Zykov, Alexei Bozhko, Makoto Ohtsuka, Rie Y. Umetsu, Akinari Okubo, Ryosuke Kainuma

    NANOSTRUCTURED THIN FILMS VII 9172 91720M-1-91720M-4 2014年

    DOI: 10.1117/12.2061650  

    ISSN: 0277-786X

    eISSN: 1996-756X

  80. 静磁場印加電磁浮遊法を利用した溶解Ni‐Fe合金の垂直分光放射率測定

    東英生, 高野隼一, 大塚誠, 福山博之

    Thermophysical Properties 34th 187-189 2013年11月20日

    ISSN: 0911-1743

  81. 溶融Coの垂直分光放射率,定圧モル熱容量および熱伝導率測定

    高野隼一, 東英生, 打越雅仁, 一色実, 大塚誠, 福山博之

    Thermophysical Properties 34th 184-186 2013年11月20日

    ISSN: 0911-1743

  82. Smart Microdevices Based on Ferromagnetic Shape Memory Alloys 査読有り

    Manfred Kohl, Marcel Gültig, Makoto Ohtsuka, Hiroyuki Miki, Ruizhi Yin

    Tenth International Conference on Flow Dynamics (ICFD2013) 484-485 2013年11月

  83. Mechanical Properties and Martensitic Transformation of Ni-Mn-In Based Magnetic Shape Memory Alloy Films 査読有り

    Koki Tsuchiya, Makoto Ohtsuka, Hiroyuki Miki, Toshiyuki Takagi

    Tenth International Conference on Flow Dynamics (ICFD2013) 742-743 2013年11月

  84. Ni‐Mn‐In系磁性形状記憶合金膜の開発および機械的特性評価

    土屋光樹, 大塚誠, 三木寛之, 高木敏行

    日本機械学会M&amp;M材料力学カンファレンス(CD-ROM) 2013 ROMBUNNO.OS1604 2013年10月10日

  85. 大気中熱処理によるa面サファイア基板の表面性状の変化と表面窒化に及ぼす影響

    関谷竜太, 大塚誠, 安達正芳, 福山博之

    日本金属学会講演概要(CD-ROM) 153rd ROMBUNNO.95 2013年9月3日

    ISSN: 2433-3093

  86. Al添加省In組成ITOスパッタ薄膜の低抵抗化と高赤外透過性

    大塚誠, 中村崇

    日本金属学会講演概要(CD-ROM) 153rd ROMBUNNO.101 2013年9月3日

    ISSN: 2433-3093

  87. 反応性スパッタ法により作製されたAlN膜の熱処理による高品質化

    熊田智行, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 153rd ROMBUNNO.96 2013年9月3日

    ISSN: 2433-3093

  88. Fe添加省In組成ITOスパッタ薄膜の高赤外線透過性

    大塚誠, 中村崇

    応用物理学会春季学術講演会講演予稿集(CD-ROM) 60th ROMBUNNO.29A-G19-9 2013年3月11日

  89. Al2O3熱窒化法によるAlN結晶成長に及ぼすZrO2添加の効果

    尤玉, 加藤三香子, 大塚誠, 福山博之

    応用物理学会春季学術講演会講演予稿集(CD-ROM) 60th ROMBUNNO.28A-G21-11 2013年3月11日

  90. OS1604 Ni-Mn-In系磁性形状記憶合金謨の開発および機械的特性評価

    土屋 光樹, 大塚 誠, 三木 寛之, 高木 敏行

    M&M材料力学カンファレンス 2013 (0) _OS1604-1_-_OS1604-3_ 2013年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemm.2013._OS1604-1_  

    詳細を見る 詳細を閉じる

    Ni-Mn-In films containing cobalt were deposited on a poly-vinyl alcohol (PVA) substrate or an alumina substrate using a dual magnetron sputtering apparatus using Ni45Mn4oInisand Co targets. The RF power for Ni-Mn-In target was kept at 200 W, and the DC power for the cobalt target was changed from 0 to 15 W. The thickness of the deposited films was kept at about 1 μm. After deposition, the films were annealed at 1123 K for 3.6 ks. The cobalt concentration of the films depended on the DC sputtered power and the martensitic transformation temperature decreased with cobalt concentration of films. After heat treatment, the films showed the good crystalline order. The mechanical properties of the films were measured by a nanoindentation method. Hardness and elastic modulus of the heat-treated films were lower than those of as-deposited films. These values of the films were affected by the Co concentration and microstructure.

  91. Al2O3熱窒化法によるバルクAlN結晶成長に及ぼすZrO2添加の効果

    尤玉, 加藤三香子, 大塚誠, 福山博之

    資源・素材学会春季大会講演集 2013 295-296 2013年

    ISSN: 1343-9898

  92. Autonomous generator based on Ni-Mn-Ga microactuator as a frequency selective element 査読有り

    M. M. Krupa, Y. B. Skirta, J. M. Barandiaran, M. Ohtsuka, V. A. Chernenko

    EPJ Web of Conferences 40 09001-09001 2013年

    DOI: 10.1051/epjconf/20134009001  

    ISSN: 2101-6275 2100-014X

    eISSN: 2100-014X

  93. Thermal energy harvesting based on ferromagnetic shape memory alloy microactuation 査読有り

    M. Gueltig, B. Haefner, M. Ohtsuka, M. Kohl

    2013 Transducers and Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013 2803-2806 2013年

    DOI: 10.1109/Transducers.2013.6627388  

  94. 省In組成ITOスパッタ薄膜の光・電気特性に及ぼすFe添加量の影響

    大塚誠, SERGIIENKO Ruslan, 中村崇

    日本金属学会講演概要(CD-ROM) 151st ROMBUNNO.404 2012年9月3日

    ISSN: 2433-3093

  95. 熱処理によるa面サファイア基板の表面性状の変化

    関谷竜太, 大塚誠, 安達正芳, 福山博之

    日本金属学会講演概要(CD-ROM) 151st ROMBUNNO.P150 2012年9月3日

    ISSN: 2433-3093

  96. 非接触レーザー周期加熱カロリメトリー法による溶融Coの熱物性測定

    高野隼一, 東英夫, 打越雅仁, 一色実, 大塚誠, 福山博之

    材料とプロセス(CD-ROM) 25 (2) ROMBUNNO.58 2012年9月1日

    ISSN: 1882-8922

  97. 加熱基板上に作製された鉄添加省インジウム組成ITOスパッタ薄膜の光・電気特性

    大塚誠, SERGIIENKO Ruslan, 中村崇

    応用物理学会学術講演会講演予稿集(CD-ROM) 73rd ROMBUNNO.14A-H7-6 2012年8月27日

  98. アルミナを原料に用いたバルクAlN結晶成長の温度依存性

    加藤三香子, 大塚誠, 福山博之

    応用物理学会学術講演会講演予稿集(CD-ROM) 73rd ROMBUNNO.12A-PB4-5 2012年8月27日

  99. 極薄Al中間層を用いたAl極性AlN膜成長

    熊田智行, 大塚誠, 福山博之

    応用物理学会学術講演会講演予稿集(CD-ROM) 73rd ROMBUNNO.13A-H10-5 2012年8月27日

  100. Ni‐Mn‐Ga強磁性形状記憶合金における自発磁化の組成依存性および磁気相図の実験的決定

    許きょう, 長迫実, 伊東航, 梅津理恵, 大塚誠, 大沼郁雄, 貝沼亮介

    日本金属学会講演概要(CD-ROM) 150th ROMBUNNO.206 2012年3月15日

    ISSN: 1342-5730

  101. Ni‐Mn‐Ga強磁性形状記憶合金における自発磁化の組成依存性および磁気相図の実験的決定

    許きょう, 長迫実, 伊東航, 梅津理恵, 大塚誠, 大沼郁雄, 貝沼亮介

    日本金属学会講演概要(CD-ROM) 150th ROMBUNNO.206 2012年3月15日

    ISSN: 2433-3093

  102. 次世代紫外発光素子に向けた単結晶AlN膜の作製

    福山博之, 熊田智行, 大塚誠

    文部科学省特別経費「大学の特性を生かした多様な学術研究機能の充実」附置研究所間アライアンスによるナノとマクロをつなぐ物質・デバイス・システム創製戦略プロジェクト(ナノマクロ物質・デバイス・システム創製アライアンス)平成23年度(2011年度)成果報告書 269-270 2012年3月

  103. 反応性スパッタ法により作製されたAlN膜の結晶性に及ぼす基板温度の影響

    熊田智行, 大塚誠, 福山博之

    応用物理学関係連合講演会講演予稿集(CD-ROM) 59th ROMBUNNO.16A-DP1-4 2012年2月29日

  104. 静磁場印加電磁浮遊法による溶融Coの垂直分光放射率および定圧モル熱容量測定

    高野隼一, 東英生, 打越雅仁, 一色実, 大塚誠, 福山博之

    日本金属学会東北支部研究発表大会予稿集 11th 10 2012年

  105. a面サファイア基板の窒化における表面性状の影響

    関谷竜太, 大塚誠, 福山博之

    日本金属学会東北支部研究発表大会予稿集 11th 17 2012年

  106. Entropy Flow in Magnetically Ordered Heusler Alloys under Influence of Temperature or Magnetic Field

    Vladimir Khovaylo, Ekaterina Avilova, Hiroyuki Miki, Toshiyuki Takagi, Makoto Ohtsuka, Vasiliy Buchelnikov, Konstantin Skokov, Oliver Gutfleisch

    IFS Collaborative Research Forum (AFI/TFI-2011) 152-153 2011年11月10日

  107. アルミナの炭素熱還元挙動の温度依存性

    加藤三香子, 小畠秀和, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 149th ROMBUNNO.POSUTASESSHON,187 2011年10月20日

    ISSN: 2433-3093

  108. Fe添加省In組成ITOスパッタ薄膜の低抵抗化

    大塚誠, SERGIIENKO Ruslan, PETROVSKA Svitlana, 中村崇

    日本金属学会講演概要(CD-ROM) 149th ROMBUNNO.S8.5 2011年10月20日

    ISSN: 2433-3093

  109. 反応性スパッタ法により基板温度823Kで作製されたAlN膜の結晶性と窒素流量比の関係

    熊田智行, 大塚誠, 福山博之

    日本金属学会講演概要(CD-ROM) 149th ROMBUNNO.POSUTASESSHON,189 2011年10月20日

    ISSN: 2433-3093

  110. Ga‐Al液相成長AlNの転位解析および極性判定

    安達正芳, 田中明和, 森川大輔, 津田健治, 小畠秀和, 大塚誠, 福山博之

    応用物理学会学術講演会講演予稿集(CD-ROM) 72nd ROMBUNNO.30P-ZF-9 2011年8月16日

  111. 反応性スパッタ法により823Kで作製されたAlN膜の結晶品質に及ぼす窒素流量比の影響

    熊田智行, 大塚誠, 福山博之

    応用物理学会学術講演会講演予稿集(CD-ROM) 72nd ROMBUNNO.31A-ZE-4 2011年8月16日

  112. 加熱基板上に作製された省In組成ITOスパッタ薄膜の光・電気特性

    大塚誠, PETROVSKA Svitlana, VOISIN Leandro, 中村崇

    日本金属学会講演概要 148th 185 2011年4月20日

    ISSN: 1342-5730

  113. 高温における機能材料創製と物性計測 (特集 地域と世界に貢献する東北大学多元物質科学研究所)

    福山博之, 大塚誠, 小畠秀和

    マテリアルズインテグレ―ション 24 (4/5) 277-283 2011年3月25日

    ISSN: 1344-7858

  114. Ga‐Alフラックスから成長したAlN膜の転位および極性解析

    安達正芳, 前田一夫, 田中明和, 森川大輔, 津田健治, 小畠秀和, 大塚誠, 福山博之

    応用物理学関係連合講演会講演予稿集(CD-ROM) 58th ROMBUNNO.25P-BY-9 2011年3月9日

  115. 反応性スパッタ法により823Kで作製されたAlN膜の結晶品質に及ぼすスパッタ電力の影響

    熊田智行, 大塚誠, 福山博之

    応用物理学関係連合講演会講演予稿集(CD-ROM) 58th ROMBUNNO.25P-BY-7 2011年3月9日

  116. 次世代紫外発光素子に向けた単結晶AlN膜の作製

    福山博之, 大塚誠, 小畠秀和

    文部科学省特別経費「大学の特性を生かした多様な学術研究機能の充実」附置研究所間アライアンスによるナノとマクロをつなぐ物質・デバイス・システム創製戦略プロジェクト(ナノマクロ物質・デバイス・システム創製アライアンス)平成22年度(2010年度)成果報告書 243-244 2011年3月

  117. 反応性スパッタ法により基板温度823Kで作製されるAlN膜の結晶性向上

    熊田智行, 大塚誠, 福山博之

    東北大学多元物質科学研究所研究発表会講演予稿集 11th 60 2011年

  118. Enhancement of Carbothermic Reduction of Al2O3 via Mechanical Milling

    Asep Ridwan Setiawan, Makoto Ohtsuka, Hiroyuki Fukuyama

    4TH NANOSCIENCE AND NANOTECHNOLOGY SYMPOSIUM (NNS2011): AN INTERNATIONAL SYMPOSIUM 1415 132-135 2011年

    DOI: 10.1063/1.3667239  

    ISSN: 0094-243X

    eISSN: 1551-7616

  119. 反応性スパッタ法により773Kで作製されたAlN膜の結晶品質に及ぼす窒素流量比の影響

    熊田智行, 大塚誠, 福山博之

    日本金属学会講演概要 147th 373 2010年9月25日

    ISSN: 1342-5730

  120. Sb添加ITOスパッタ薄膜の光・電気特性に及ぼす酸素流量比と熱処理温度の影響

    大塚誠, PETROVSKA Svitlana, VOISIN Leandro, 中村崇

    日本金属学会講演概要 147th 368 2010年9月25日

    ISSN: 1342-5730

  121. アルミナの炭素熱還元析出法による高品質AlNバルク単結晶の作製

    加藤三香子, 小畠秀和, 大塚誠, 福山博之, 服部剛, 東正信, 高田和哉

    応用物理学会学術講演会講演予稿集(CD-ROM) 71st ROMBUNNO.14P-C-15 2010年8月30日

  122. 省インジウム組成ITOスパッタ薄膜の低抵抗化

    大塚誠, PETROVSKA Svitlana, VOISIN Leandro, 中村崇

    応用物理学会学術講演会講演予稿集(CD-ROM) 71st ROMBUNNO.16P-ZJ-15 2010年8月30日

  123. 反応性スパッタ法で作製されたAlN膜の結晶品質に及ぼす窒素流量比および基板温度の影響

    熊田智行, 大塚誠, 福山博之

    応用物理学会学術講演会講演予稿集(CD-ROM) 71st ROMBUNNO.16A-C-4 2010年8月30日

  124. Ni‐Mn基合金の磁場誘起相変態とメタ磁性形状記憶効果

    大塚誠, 小山佳一

    東北大学金属材料研究所強磁場超伝導材料研究センター年次報告 2009 135-137 2010年6月

  125. 反応性スパッタ法により作製された単結晶AlN膜の結晶性に及ぼす窒素分圧の影響

    熊田智行, 大塚誠, VASHAEI Zahra, 福山博之

    日本金属学会講演概要 146th 307 2010年3月28日

    ISSN: 1342-5730

  126. 省インジウム組成ITOスパッタ薄膜の開発

    大塚誠, ANDRES Voisin, Aravena Leandro, 中村崇

    日本金属学会講演概要 146th 305 2010年3月28日

    ISSN: 1342-5730

  127. 省インジウムITOスパッタ技術の現状

    大塚誠

    日本化学会講演予稿集 90th (1) 67 2010年3月12日

    ISSN: 0285-7626

  128. Electron beam lithography of free-standing Ni-Mn-Ga films

    Mario Schmitt, M. Ohtsuka, M. Kohl

    Physics Procedia 10 174-181 2010年1月1日

    DOI: 10.1016/j.phpro.2010.11.095  

    ISSN: 1875-3884

    eISSN: 1875-3892

  129. Martensitic transformation in Ni-Mn-Ga thin films deposited on alumina

    M. Hagier, V. A. Chernenko, M. Ohtsuka, S. Besesseghini, P. Müller

    Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08 453-457 2009年12月1日

  130. Structural and magnetic phenomena in NIMNGA/substrate thin films composites

    V. A. Chernenko, S. Besseghini, V. Recarte, R. Lopez Anton, A. Gambardella, J. M. Barandiaran, M. Ohtsuka

    Proceedings of the International Conference on Martensitic Transformations, ICOMAT-08 459-464 2009年12月1日

  131. サファイア窒化法による単結晶AlN膜作製における最適条件の探索

    熊田智行, 小畠秀和, 大塚誠, 福山博之

    日本金属学会講演概要 145th 449 2009年9月15日

    ISSN: 1342-5730

  132. Ni‐Mn‐In合金スパッタ膜の構造と磁気特性に及ぼすCo添加の影響

    大塚誠, 梅津理恵, 貝沼亮介, 三井好古, 小山佳一, 渡辺和雄, 石田清仁

    日本金属学会講演概要 145th 410 2009年9月15日

    ISSN: 1342-5730

  133. 強磁場・高温X線回折測定によるNiCoMnIn薄膜の相変態の観測

    三井好古, 小山佳一, 渡辺和雄, 大塚誠, 梅津理恵, 貝沼亮介

    日本物理学会講演概要集 64 (2) 377 2009年8月18日

    ISSN: 1342-8349

  134. Ni‐Mn‐Inメタ磁性形状記憶合金スパッタ膜の磁気特性

    大塚誠, 梅津理恵, 貝沼亮介, 石田清仁

    日本金属学会講演概要 144th 322 2009年3月28日

    ISSN: 1342-5730

  135. 27pQJ-11 強磁場・高温X線回折測定によるNiCoMnIn薄膜の相変態の観測(遍歴磁性,領域3,磁性,磁気共鳴)

    三井 好古, 小山 佳一, 渡辺 和雄, 大塚 誠, 梅津 理恵, 貝沼 亮介

    日本物理学会講演概要集 64 (0) 377-377 2009年

    出版者・発行元: 一般社団法人 日本物理学会

    DOI: 10.11316/jpsgaiyo.64.2.3.0_377_2  

    ISSN: 1342-8349

  136. Ni-Mn基合金の磁場誘起相変態とメタ磁性形状記憶効果 (強磁場下の物性の研究--その他)

    大塚 誠, 小山 佳一

    東北大学金属材料研究所強磁場超伝導材料研究センター年次報告 2009 135-137 2009年

    出版者・発行元: 東北大学金属材料研究所附属強磁場超伝導材料研究センター

  137. サファイア窒化法により作製したAIN薄膜の結晶性に及ぼす温度および窒素分圧の影響

    熊田智行, 大塚誠, 福山博之

    東北大学多元物質科学研究所研究発表会講演予稿集 9th 97 2009年

  138. Structural and magnetic properties of Ni-Mn-Ga films sputter-deposited on cube-textured polycrystalline substrate 査読有り

    V. A. Chernenko, P. Bassani, R. Lopez Anton, S. Besseghini, J. M. Barandiaran, A. Tuissi, I. Orue, P. Lazpita, M. Ohtsuka

    ESOMAT 2009 - 8TH EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS 04003-1-04003-5 2009年

    DOI: 10.1051/esomat/200904003  

  139. Ni‐Co‐Mn‐Snメタ磁性形状記憶合金の薄膜化と磁気特性の評価

    大塚誠, 梅津理恵, 貝沼亮介, 石田清仁

    日本金属学会講演概要 143rd 403 2008年9月23日

    ISSN: 1342-5730

  140. 強磁性形状記憶合金Ni‐Mn‐Ga膜を用いた2次元光学スキャナの開発

    大塚誠, BRUGGER Daniel, KOHL Manfred

    日本金属学会講演概要 143rd 417 2008年9月23日

    ISSN: 1342-5730

  141. Ni54Mn23Ga23スパッタ膜の機械的特性に及ぼす温度および磁場の影響

    大塚誠, 山内真一, 松本實, 板垣乙未生

    日本金属学会講演概要 142nd 142 2008年3月26日

    ISSN: 1342-5730

  142. コンビナトリアルスパッタ法によるITO薄膜の作製

    大塚誠, ANDRES Voisin, Aravena Leandro, 中村崇

    資源・素材 2008 (C/D/E) 105-106 2008年

    ISSN: 0919-7915

  143. 強磁性形状記憶合金スパッタ膜における磁気構造相変態の評価 (強磁場下の物性の研究--その他)

    大塚 誠, 小山 佳一

    東北大学金属材料研究所強磁場超伝導材料研究センター年次報告 2008 150-152 2008年

    出版者・発行元: 東北大学金属材料研究所附属強磁場超伝導材料研究センター

  144. Magnetic anisotropy, sress, and martensitic transformation in Ni-Mn-Ga thin films on Si(100) wafer

    Michael Hagler, Volodymyr A. Chernenko, Makoto Ohtsuka, Stefano Besseghini, Peter Muelliner

    Materials Research Society Symposium Proceedings 998 109-114 2007年12月1日

    DOI: 10.1557/proc-998-j06-09  

    ISSN: 0272-9172

  145. Magnetostructural Phase Transformations of Ferromagnetic Shape Memory Alloy Sputtered Films

    Makoto Ohtsuka, Jyunpei Sekino, Kimio Itagaki, Toshiyuki Takagi, Keiichi Koyama

    Selected Topics in 2006 Annual Report at Sendai 5 2007年9月

  146. 3d遷移元素添加Ni2MnGa強磁性形状記憶合金膜の磁気抵抗

    小池邦博, 山根アダム, 大塚誠, 松本實, 高木敏行, 安達義也, 加藤宏朗

    日本金属学会講演概要 140th 506 2007年3月27日

    ISSN: 1342-5730

  147. 鉄添加Ni2MnGaスパッタ膜の形状記憶効果に及ぼす拘束時効処理の影響

    関野淳平, 大塚誠, 松本實, 高木敏行, 小山佳一, 板垣乙未生

    日本金属学会講演概要 140th 140 2007年3月27日

    ISSN: 1342-5730

  148. 強磁性形状記憶合金スパッタ膜における磁気構造相変態の評価 (強磁場下の物性の研究--その他)

    大塚 誠, 小山 佳一

    東北大学金属材料研究所強磁場超伝導材料研究センター年次報告 2007 113-116 2007年

    出版者・発行元: 東北大学金属材料研究所附属強磁場超伝導材料研究センター

  149. Ni2MnGa合金膜の磁気抵抗に与える3d遷移元素の添加効果

    山根アダム, 本田泰之, 小池邦博, 大塚誠, 松本實, 高木敏行, 安達義也, 森田博昭, 加藤宏朗

    応用物理学会東北支部学術講演会講演予稿集 61st 84-85 2006年12月7日

  150. バイアススパッタ法によるLaNi5膜の組織と構造に及ぼすスパッタ電力の影響

    中門研太, 大塚誠, 菖蒲祐輔, 板垣乙未生

    日本金属学会講演概要 139th 168 2006年9月16日

    ISSN: 1342-5730

  151. 鉄を添加した強磁性Ni2MnGaスパッタ膜の形状記憶効果に及ぼす組成の影響

    関野淳平, 大塚誠, 勝山博之, 松本實, 高木敏行, 板垣乙未生

    日本金属学会講演概要 139th 292 2006年9月16日

    ISSN: 1342-5730

  152. MAGNETIC PROPERTY AND SHAPE MEMORY EFFECT OF Ni2MnGa SPUTTERED FILMS CONTAINING IRON

    M. Ohtsuka, K. Koike, M. Matsumoto, T. Takagi, K. Itagaki

    Proceedings of The Third International Symposium on Intelligent Artifacts and Bio-systems 2006年9月

  153. Phase transitions in Ni2+xMn1-xGa with a high Ni excess (vol 72, pg 224408, 2005)

    VV Khovaylo, VD Buchelnikov, R Kainuma, VV Koledov, M Ohtsuka, VG Shavrov, T Takagi, SV Taskaev, AN Vasiliev

    PHYSICAL REVIEW B 73 (14) 2006年4月

    DOI: 10.1103/PhysRevB.73.149901  

    ISSN: 1098-0121

    eISSN: 1550-235X

  154. 強磁性形状記憶合金スパッタ膜における磁気構造相変態の評価 (強磁場下の物性の研究--磁性)

    大塚 誠, 関野 淳平, 小山 佳一

    東北大学金属材料研究所強磁場超伝導材料研究センター年次報告 2006 93-96 2006年

    出版者・発行元: 東北大学金属材料研究所附属強磁場超伝導材料研究センター

  155. Ni2MnGaスパッタ膜のマルテンサイト変態と磁気的性質に及ぼすFeおよびCo添加の影響

    勝山博之, 大塚誠, 片野義春, 小池邦博, 松本実, 板垣乙未生

    日本金属学会講演概要 137th 331 2005年9月28日

    ISSN: 1342-5730

  156. Ni2MnGaスパッタ膜の形状記憶効果に及ぼすFeおよびCo添加の影響

    大塚誠, 勝山博之, 片野義春, 松本実, 高木敏行, 板垣乙未生

    日本金属学会講演概要 137th 331 2005年9月28日

    ISSN: 1342-5730

  157. バイアススパッタ法により作製されたLaNi5膜の組織と構造

    菖蒲祐輔, 大塚誠, 佐藤尚平, 板垣乙未生

    日本金属学会講演概要 137th 208 2005年9月28日

    ISSN: 1342-5730

  158. Ni_2MnGa強磁性形状記憶合金スパッタ膜の開発とアクチュエータへの応用

    大塚 誠

    まてりあ : 日本金属学会会報 44 (4) 308-314 2005年4月20日

    出版者・発行元: 公益社団法人 日本金属学会

    DOI: 10.2320/materia.44.308  

    ISSN: 1340-2625

  159. 強磁性形状記憶合金Ni2MnGaスパッタ膜の形状記憶特性に及ぼす組成の影響

    大塚誠, 紺野勇哉, 松本実, 板垣乙未生

    日本金属学会講演概要 136th 77 2005年3月29日

    ISSN: 1342-5730

  160. Influence of three-dimensional transition elements on magnetic and structural phase transitions of Ni-Mn-Ga alloys (vol 95, pg 1740, 2004)

    AA Cherechukin, T Takagi, H Miki, M Matsumoto, M Ohtsuka

    JOURNAL OF APPLIED PHYSICS 97 (5) 2005年3月

    DOI: 10.1063/1.1850176  

    ISSN: 0021-8979

  161. Magnetic properties of submicron Ni-Mn-Ga martensitic thin films 国際誌 国際共著

    M. Kohl, V. A. Chernenko, M. Ohtsuka, H. Reuter, T. Takagi

    Materials Research Society Symposium Proceedings 855 36-41 2004年12月1日

    ISSN: 0272-9172

  162. 多結晶Ni2MnGa強磁性形状記憶合金の機械的特性に及ぼす第2相の影響

    大塚誠, 小笠原宏行, 松本実, 板垣乙未生

    日本金属学会講演概要 135th 333 2004年9月28日

    ISSN: 1342-5730

  163. 強磁性形状記憶合金スパッタ膜の機械的特性

    大塚誠, 紺野勇哉, 松本実, 木村久道, 笹森賢一郎

    新素材設計開発施設共同利用研究報告書 2003 11-12 2004年6月

  164. Influence of three-dimensional transition elements on magnetic and structural phase transitions of Ni-Mn-Ga alloys

    AA Cherechukin, T Takagi, H Miki, M Matsumoto, M Ohtsuka

    JOURNAL OF APPLIED PHYSICS 95 (4) 1740-1742 2004年2月

    DOI: 10.1063/1.1641184  

    ISSN: 0021-8979

  165. Optical Scanner Based on a NiMnGa Thin Film Microactuator 国際誌 国際共著

    Manfred Kohl, Stieven Hoffmann, Young Liu, Makoto Ohtsuka, Toshiyuki Takagi

    Journal de Physique IV 112 1185-1188 2003年10月

    DOI: 10.1051/jp4:20031094  

    ISSN: 1155-4339

  166. Mechanical and Shape Memory Properties of Ferromagnetic Ni2MnGa Sputter-deposited Films 国際誌

    Makoto Ohtsuka, Minoru Matsumoto, Kimio Itagaki

    Journal de Physique IV 112 899-902 2003年10月

    DOI: 10.1051/jp4:20031026  

    ISSN: 1155-4339

  167. A novel actuation mechanism based on ferromagnetic SMA thin films 査読有り

    M Kohl, D Brugger, M Ohtsuka, T Takagi

    BOSTON TRANSDUCERS'03: DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2 2 1011-1014 2003年

    DOI: 10.1109/SENSOR.2003.1216939  

  168. Ferromagnetic shape-memory alloy Ni2MnGa

    Minoru Matsumoto, Makoto Ohtsuka, Hiroyuki Miki, Vladimir V. Khovailo, Toshiyuki Takagi

    Materials Science Forum 394-395 545-548 2002年12月

    ISSN: 0255-5476

    eISSN: 1662-9752

  169. Electron Holography Studies of Magnetic Domain Structure in Sputtered Ni2MnGa Alloy Films 査読有り

    Yasukazu Murakami, Daisuke Shindo, Motohiko Suzuki, Makoto Ohtsuka, Kimio Itagaki

    15th International Congress on Electron Microscopy 1 735-736 2002年9月3日

  170. Two-way shape memory effect and mechanical properties of pulse discharge sintered Ni2.18Mn0.82Ga

    T Takagi, Khovailo, V, T Nagatomo, M Matsumoto, M Ohtsuka, T Abe, H Miki

    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS 16 (3-4) 173-179 2002年

    DOI: 10.3233/jae-2002-235  

    ISSN: 1383-5416

  171. Ferromagnetic Shape Memory Alloy Ni2MnGa Films 国際誌

    Minoru Matsumoto, Makoto Ohtsuka, Kimio Itagaki, Toshiyuki Takagi, Takeo Fujino

    Journal de Physique IV 11 (PR8) 275-279 2001年11月

    DOI: 10.1051/jp4:2001847  

    ISSN: 1155-4339

  172. 強磁性形状記憶合金Ni_2MnGaの特性

    松本 實, 大塚 誠, 三木 寛之, 高木 敏行, 板垣 乙未生

    シンポジウム電磁力関連のダイナミックス講演論文集 13 391-392 2001年6月20日

  173. 低酸素分圧下で酸化したNbおよびY被覆TiAlの酸化被膜 査読有り

    井上博文, 鈴木 茂, 早稲田嘉夫, 大塚 誠, 板垣乙未生

    東北大学多元物質科学研究所 素材工学研究彙報 57 (1, 2) 39-48 2001年4月

  174. Mechanical and Shape Memory Properties of Ferromagnetic Ni2+xMn1-xGa Alloys 査読有り

    Toshiyuki Takagi, Vladimir V. Khovailo, Takeshi Nagatomo, Minoru Matsumoto, Makoto Ohtsuka, Toshihiko Abe, Hiroyuki Miki

    The Short Version of Papers for Presentation, Third Asian Symposium on Applied Electromagnetics, ASAEM2001 128-129 2001年4月

  175. <記事>気相制御研究分野 (2000.1-2000.12)(研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 小林 忠之, 清水 保史, 千葉 広樹, 礒川 真治, 大井 淳, 竹田 由彦, 亀谷 真太郎, 鈴木 基彦, 中村 充, D. G. Mendoza, C. Wedel, H. M. Henao

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 56 (1) 124-125 2001年3月1日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  176. K-0404 強磁性形状記憶合金Ni_2MnGa膜の形状記憶特性(S08-1 機能特性・変態)(S08 形状記憶合金の製造・加工技術と機能発現)

    磯川 真治, 大塚 誠, 松本 實, 高木 敏行, 板垣 乙未生

    年次大会講演論文集 1 (0) 87-88 2001年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemecjo.I.01.1.0_87  

    詳細を見る 詳細を閉じる

    Ferromagnetic shape memory alloy Ni_2MnGa has Heusler type crystal structure. Cubic structure of high temperature phase transforms to tetragonal one during cooling by thermo-elastic martensitic transformation. These transformation temperatures are below Curie temperature. Curie temperature decreased and transformation temperatures increased with increase of Ni composition in non-stoichiometric Ni_<2+x>Mn_<1-x>Ga (x=0〜0.19). Sputtered films were fabricated by a magnetron sputtering apparatus. The thickness of these films was 5 μm. Columnar structures which grew in parallel with the thickness of film were observed in these films. Crystal structures, transformation temperatures and magnetic properties of these films were similar to bulk specimens. Sputtered films showed two way shape memory effect.

  177. K-2322 強磁性形状記憶合金Ni_2MnGaスパッタ膜の機械的特性(J03-4 知的複合材料)(J03 知的材料・構造システム)

    大塚 誠, 大井 淳, 松本 實, 板垣 乙未生, 高木 敏行

    年次大会講演論文集 1 (0) 345-346 2001年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemecjo.V.01.1.0_345  

    詳細を見る 詳細を閉じる

    The Ni_2MnGa films were deposited on an alumina substrate with a radio-frequency magnetron sputtering apparatus using Ni_<50>Mn_<25>Ga_<25> and Ni_<52>Mn_<24>Ga_<24> targets. The sputtering power was 50 or 200 W. The thickness of the deposited films was about 5 μm. After deposition, the films were annealed at 873-1173 K. for 3.6 or 36 ks. The as-deposited films were crystalline and had columnar grains. After heat treatment, the grains widened and the grain boundary became indistinct with increasing heat treatment temperature. MnO and Ni_3(Mn, Ga) precipitations were observed in the heat-treated films. The mechanical properties of the films were measured by the nanoindentation method. Hardness and elastic modulus of as-deposited films were larger than that of arc-melted bulk samples. The hardness of the films was changed between 600 and 300 affected by the composition, crystal structure, microstructure and precipitation, etc. The elastic modulus of the films was also changed from 140 to 90 GPa with heat treatment conditions.

  178. Martensitic transformation and shape memory effect of sputtered Ni-Mn-Ga films 査読有り

    M. Ohtsuka, M. Matsumoto, K. Itagaki

    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II 1661-1664 2001年

  179. 強磁性を有する形状記憶合金の最近の研究の展開

    松本 實, 大塚 誠, 三木 寛之, 高木 敏行

    日本AEM学会誌 8 (4) 445-453 2000年12月10日

    出版者・発行元: 日本AEM学会

    ISSN: 0919-4452

    詳細を見る 詳細を閉じる

    This paper introduces ferromagnetic shape memory alloys and recent research progress on bulk and film specimens. The Heusler type Ni-Mn-Ga alloy system can be one of intelligent ferromagnetic materials exhibiting the shape memory effect. Since the materials made by the arc melting method show brittleness, a spark plasma sintering method was introduced to overcome this disadvantage. Thin films made by the sputtering method show good ductility to be bent and exhibit the two way shape memory effect. Future possible applications to micro actuators are expected using magnetic field induced shape memory effect.

  180. ナノインデンテーション法によるLaNi5スパッタ薄膜の機械的特性の評価

    大塚 誠, 徳本 哲朗, 板垣 乙未生

    東北大学素材工学研究所彙報 56 (1/2) 17-24 2000年12月

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

    詳細を見る 詳細を閉じる

    LaNi_5 intermetallic compound has superior hydrogen-absorption and -desorption properties, and it is well known as a hydrogen storage material. Thin films of hydrogen storage alloy may be used as electrode of rechargeable batteries or fuel cell, a filter for hydrogen purification and various kinds of sensor. LaNi_5 thin films were prepared by a radio frequency magnetron sputtering apparatus with a sputtering power of 50-400W at substrate temperature of 323-573K. Mechanical properties of the films such as hardness and elastic modulus were investigated with respect to the sputtering conditions using nanoindentation in the present study. The difference in the structure gave an effect to the hardness of the films. For the same structure, the films deposited at higher sputtering power and higher substrate temperature showed higher hardness. The crystal orientation gave an effect to the elastic modulus of the films.lanthanum-nickelhydrogen storage alloymicrostructurehardnesselastic modulus

  181. 新材料開発 強磁性温度領域で効果を発揮する形状記憶合金

    松本 實, 大塚 誠

    工業材料 48 (9) 72-75 2000年9月

    出版者・発行元: 日刊工業新聞社

    ISSN: 0452-2834

  182. Properties of Ferromagnetic Shape Memory Alloy Ni2MnGa Thin Films 査読有り

    Minoru Matsumoto, Makoto Ohtsuka, Kimio Itagaki, Takeo Fujino

    Proc. 9th MAGDA 36-39 2000年4月

  183. <記事>希土類ニッケル系水素吸蔵合金のマイクロプロセシング(主題 : 金属素材の製造プロセスに係る新しい展開)(平成 11 年度素材工学研究所研究懇談会)(素材工学研究会記事)

    大塚 誠

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 55 (1) 155-155 2000年3月10日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  184. <記事>気相制御研究分野 (1999.1-1999.12) (研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 文 南日, 前田 吉彦, 武谷 要, 鈴木 政也, 徳本 哲朗, 小林 忠之, 清水 保史, 千葉 広樹, 礒川 真治, 大井 淳, 竹田 由彦, B. Wedel, J. M. Font, D. G. Mendoza, A. Zakeri, C. Wedel, H. M. Henao

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 55 (1) 120-121 2000年3月10日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  185. 327 強磁性形状記憶合金Ni_2MnGa薄膜の作製と評価(OS 多機能・複合機能化への材料協調設計)

    松本 實, 大塚 誠, 高木 敏行, 板垣 乙未生, 藤野 威男

    機械材料・材料加工技術講演会講演論文集 2000 (0) 263-264 2000年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemp.2000.8.263  

    詳細を見る 詳細を閉じる

    Ferromagnetic shape memory alloy Ni_2MnGa has Heusler type crystal structure. In this alloy, the martensitic transformation occurs within the ferromagnetic temperature range. Using the melt spinning method and the sputtering method, several kinds of Ni_2MnGa thin films were fabricated in order to study the physical and mechanical properties. These thin film specimens had good crystallinity and showed the crystal structure as same as bulk specimen. Rapidly solidified Ni_2MnGa ribbons made by single roll melt spinning method were 20μm in thickness and 1mm in width. The transformation temperatures, Ms, Mf, As and Af, were 120, 90, 125 and 150K, respectively. This was a brittle specimen. Sputtered Ni_2MnGa thin films were made by using a high frequency magnetron sputtering apparatus. The thickness of the thin film was 5μm. The films deposited on the poly-vinyl alcohol substrate showed shape memory effect.

  186. 502 強磁性形状記憶合金の機械特性評価(材料物性)

    長友 武士, 三木 寛之, 高木 敏行, 阿部 利彦, 大塚 誠, 羅 雲, 松本 實, 佐藤 武志, 山内 清

    東北支部総会・講演会 講演論文集 2000 (0) 160-161 2000年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmeth.2000.35.160  

    詳細を見る 詳細を閉じる

    In this study, the mechanical properties of shape memory alloys, Ni_<2.1>Mn_<0.9>Ga and Ti51at%Ni were investigated. Ni_<2.1>Mn_<0.9>Ga was a ferromagnetic shape memory alloy which indicated magnetic field-induced shape memory effect, and Ti51at%Ni was known as a typical shape memory alloy. The temperature dependence of the sound velocities were measured using an ultrasonic pulse echo measurement. Experimental results show that the velocities decreased at the temperature of the transformation.

  187. 318 Ni_2MnGa スパッタ膜の形状記憶効果

    大塚 誠, 千葉 広樹, 松本 實, 板垣 乙未生, 高木 敏行

    年次大会講演論文集 2000 (0) 43-44 2000年

    出版者・発行元: 一般社団法人 日本機械学会

    DOI: 10.1299/jsmemecjo.2000.1.0_43  

    詳細を見る 詳細を閉じる

    The Ni-Mn-Ga films were deposited on a poly-vinyl alcohol substrate with a radio-frequency magnetron sputtering apparatus using Ni_<50>Mn_<25>Ga_<25> and Ni_<52>Ga_<24> targets. After separating from the substrates, the films were annealed at several temperatures for 3.6ks. The chemical composition of the films depended on the radio-frequency generating power, however, there was no dependence on the heat treatment temperature. Each deposited film has a columnar grain structure. After heat treatment, the width of columnar grains widened and then became indistinct with increasing heat treatment temperature. At more than 1073 K, the precipitation of MnO was observed clearly. The films showed he most crystallinity at 1073 K. The martensitic transformation temperature increased with increasing nickel content of films, while the Curie temperature decreased. The film obtained at 200 W using the Ni_<52>Mn_<24>Ga_<24> target after heat treatment at 1073 K showed one-way shape memory effect through the reverse martensitic structural transformation during heating.

  188. Interdiffusion paths in the diffusion couple Y-Al2O3 査読有り

    M. Ohtsuka, R. Cremer, E. Zimmermann, D. Neuschutz

    HIGH TEMPERATURE MATERIALS CHEMISTRY, PTS I AND II, PROCEEDINGS 15 621-624 2000年

    ISSN: 1433-5522

  189. Structure of Ni-Mn-Ga films prepared by sputtering method 査読有り

    M. Ohtsuka, K. Chiba, M. Matsumoto, K. Itagaki

    SECOND INTERNATIONAL CONFERENCE ON PROCESSING MATERIALS FOR PROPERTIES 301-306 2000年

  190. 還元拡散法による希土類-ニッケル系水素吸蔵合金粉末の直接製造 (特集 金属素材プロセス次世代への展望) -- (ニオブ・タンタル・希土類金属)

    板垣 乙未生, 大塚 誠

    金属 69 (10) 881-887 1999年10月

    出版者・発行元: アグネ技術センター

    ISSN: 0368-6337

  191. 還元拡散法による希土類ーニッケル系水素吸蔵合金の直接製造

    板垣乙未生, 大塚 誠

    金属 69 (10) 881-887 1999年4月

  192. <記事>気相制御研究分野 (1998.1-1998.12) (研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 文 南日, 前田 吉彦, 武谷 要, 鈴木 政也, 徳本 哲朗, 小林 忠之, 清水 保史, 千葉 広樹, 宋 栄哲, B. Wedel, A. Zakeri, C. Wedel, H. M. Henao, J. M. Font

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 54 (1) 90-91 1999年3月26日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  193. <記事>(3) スパッタリング法による LaNi_5 水素吸蔵合金薄膜の作製と評価(主題「スパッタ法による薄膜の作製・評価と素材」)(特定テーマシンポジウム)(素材工学研究会記事)

    大塚 誠

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 53 (1) 137-137 1998年3月27日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  194. <記事>気相制御研究分野 (1997.1-1997.12)(研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 王 乾坤, 宇都宮 公昭, 文 南日, 今村 正樹, 前田 吉彦, 菊地 英幸, 中川原 聡, 松本 徹, 鈴木 政也, 徳本 哲朗, 宋 栄哲, B. Wedel, G. Roghani, A. Zakeri, R. U. Pagador, J. C. Font, H. M. Henao, C. Wedel

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 53 (1) 108-109 1998年3月27日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  195. Structure and hydrogen-absorption properties of LaNi5 thin films prepared by a sputtering method

    M Ohtsuka, K Harada, T Matsumoto, K Itagaki

    VALUE-ADDITION METALLURGY 167-175 1998年

  196. 薄膜の機械的性質の測定に利用される精密表面材料評価システム

    大塚 誠, 松本 徹, 徳本 哲朗, Makoto OHTSUKA, Toru MATSUMOTO, Tetsuro TOKUMOTO

    東北大学素材工学研究所彙報 53 (1) 85-91 1997年12月

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  197. 薄膜の機械的性質の測定に利用される精密表面材料評価システム.

    大塚 誠

    東北大学素材工学研究所彙報 53 (1-2) 85-91 1997年4月

  198. <記事>気相制御研究分野 (1996. 1-1996. 12) (研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 王 乾坤, 宇都宮 公昭, 文 南日, 今村 正樹, 原田 健太郎, 藤田 康世, 山内 輝和, 菊地 英幸, 中川原 聡, 松本 徹, 松永 康紀, G. Roghani, A. Zakeri, R. U. Pagador, J. M. Lara, J. C. Font

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 52 (1) 170-171 1997年3月28日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  199. スパッタリング法によるLaNi_5水素吸蔵合金薄膜の作製およびその評価

    松本 徹, 原田 健太郎, 大塚 誠, 板垣 乙未生

    資源・素材 1996 (1) 35-35 1996年10月21日

    ISSN: 0919-7915

  200. 気相制御研究分野 (1995. 1-1995. 12)(研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 王 乾坤, 宇都宮 公昭, 原田 健太郎, 藤田 康世, 山内 輝和, 菊地 英幸, 中川 原聡, 松本 徹, 文 南日, Roghani G., Surapunt S., Pagador R. U., Font J. C., Lara J. M.

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 51 (1) 116-117 1995年12月

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  201. HIGH TEMPERATURE CREEP OF ALPHA-2 TI-34MOL% AL POLYCRYSTALS

    H OIKAWA, T FUKUDA, M OHTSUKA

    HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2 364 517-522 1995年

    ISSN: 0272-9172

  202. LaNi5水素吸蔵合金の薄膜作製に関する最近の研究

    大塚 誠, 板垣 乙未生, Makoto OHTSUKA, ITAGAKI Kimio

    東北大学素材工学研究所彙報 50 (1) p88-96 1994年12月

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  203. 気相制御研究分野 (1994. 1-1994. 12) (研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 周 玉林, 王 乾坤, 原田 健太郎, 藤田 康世, 山内 輝和, Roghani G., Surapunt S., Pagador R. U., Nyamai C. M., Font J. C.

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 50 (1) 198-199 1994年12月

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  204. LaNi5水素吸蔵合金の薄膜作製に関する最近の研究.

    大塚 誠

    東北大学素材工学研究所彙報 50 (1-2) 88-96 1994年4月

  205. <記事>気相制御研究分野 (1993.1-1993.12) (研究活動報告)

    板垣 乙未生, 日野 光久, 大塚 誠, 山口 勉功, 周 玉林, 遠藤 城幸, 小林 宙, 佐武 秀機, D. Y. Kim, S. Surapunt, R. R. Vazquez, C. M. Nyamai

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 49 (1) 148-149 1994年3月30日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  206. <記事>気相制御研究分野 (1992.1-1992.12)(研究活動報告)

    板垣 乙未生, 大塚 誠, 遠藤 城幸, 小林 宙, 佐武 秀機, D. Y. Kim, S. Supachai, R. R. Vazquez

    東北大学素材工学研究所彙報 = Bulletin of the Institute for Advanced Materials Processing, Tohoku University 48 (1) 174-175 1993年3月30日

    出版者・発行元: 東北大学素材工学研究所

    ISSN: 0919-4827

  207. CREEP-BEHAVIOR OF TI-27 MOL-PERCENT AL INTERMETALLICS 査読有り

    M OHTSUKA, H OIKAWA

    TITANIUM '92: SCIENCE AND TECHNOLOGY, VOLS 1-3 1123-1130 1993年

  208. MECHANISM OF REACTION-RATE ENHANCEMENT IN DIRECT PRODUCTION OF LANI5 BY REDUCTION-DIFFUSION METHOD

    M OHTSUKA, DY KIM, K ITAGAKI

    FIRST INTERNATIONAL CONFERENCE ON PROCESSING MATERIALS FOR PROPERTIES 203-206 1993年

︎全件表示 ︎最初の5件までを表示

書籍等出版物 8

  1. Structure of Ni-Mn-Ga Films Prepared by Sputtering Method.

    大塚 誠

    Processing Materials for Properties-II, The Minerals, Metals and Materials Society 2000年4月

  2. Structure and Hydrogen-Absorption Properties of LaNi5 Thin Films Prepared by a Sputtering Method.

    大塚 誠

    Valued-Addition Metallurgy, The Minerals, Metals and Materials Society, 1998年4月

  3. Fabrication of Ni2MnGa Thin Film.

    大塚 誠

    Proceedings of the Japan-France Seminar on Intelligent Materials and Structures 1997年4月

  4. High Temperature Creep of Alpha-two Ti-34 mol% Al Polycrystals.

    大塚 誠

    High Temperature Ordered Intermetallics Alloys I, Materials Research Society 1995年4月

  5. Creep Behavior and Substructures of #Galpha#GR2 Ti-27 mol% Al Intermetallics.

    大塚 誠

    Strength of Materials, The Japan Institute of Metals 1994年4月

  6. Creep Behavior of Ti-27 mol% Al Intermetallics.

    大塚 誠

    Titanium '92, Science and Technology, The Minerals, Metals and Materials Society 1993年4月

  7. Creep Strength of the Alpha-two and the Gamma Phase in the Ti-Al system.

    大塚 誠

    Proceedings of Japan International Symposium on Intermetallic Compounds for High-Temperature Structual Applications 1993年4月

  8. Mechanism of Reaction Rate Enhahcement in Direct Production of LaNi5 by Reduction-Diffusion Method.

    大塚 誠

    First International Conference on Processing Materials for Properties, The Minerals, Metals and Materials Society 1993年4月

︎全件表示 ︎最初の5件までを表示

講演・口頭発表等 128

  1. Fe-Cr-Ni合金溶液から成長したAlN結晶の成長形態に及ぼす温度の影響

    新野田 剛, 安達正芳, 大塚 誠, 福山博之

    第24回東北大学多元物質科学研究所研究発表会 2024年12月12日

  2. A new solution growth method of AlN single crystal using Fe-Cr flux 国際会議

    Hiroyuki Fukuyama, Sen Li, Masayoshi Adachi, Makoto Ohtsuka

    Tohoku-Melbourne Joint Workshop in Materials Science 2024年11月7日

  3. Thermophysical property measurement of Ti-Nb melts using electromagnetic levitation technique 国際会議

    Masayoshi Adachi, Ryo Ogasawara, Makoto Ohtsuka, Hiroyuki Fukuyama

    Tohoku-Melbourne Joint Workshop in Materials Science 2024年11月6日

  4. Synthesis of AlN Crystals by Solution Growth Method Using Fe-Cr-Ni Fluxes 国際会議

    Go Shinnoda, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    The 11th Asia-Pacific Workshop on Widegap Semiconductors (APWS 2024) 2024年10月17日

  5. Effect of Cooling Rate on Solution Growth of AlN Crystal Using Fe-Cr-Ni Flux 国際会議

    Makoto Ohtsuka, Go Shinnoda, Masayoshi Adachi, Hiroyuki Fukuyama

    The 11th Asia-Pacific Workshop on Widegap Semiconductors (APWS 2024) 2024年10月17日

  6. New Solution Growth of AlN Single Crystals using Fe-Cr Based Fluxes 国際会議

    Sen Li, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    The 11th Asia-Pacific Workshop on Widegap Semiconductors (APWS 2024) 2024年10月17日

  7. Development of a new solution growth method for AlN single crystals using Fe-Cr flux

    李 森, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2024年秋期(第175回)講演大会 2024年9月20日

  8. 溶融Fe-Cr-Ni合金を用いた溶液成長法によるAlN結晶成長に及ぼす基板回転の効果

    大塚 誠, 安達正芳, 福山博之

    日本金属学会2024年秋期(第175回)講演大会 2024年9月20日

  9. 電磁浮遊法を用いたTi-Nb合金融液の熱物性測定

    安達正芳, 小笠原 遼, 大塚 誠, 福山博之

    日本金属学会2024年秋期(第175回)講演大会 2024年9月19日

  10. ガスジェット浮遊法によるNi融体の表面張力および粘度測定

    長草生真, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2024年秋期(第175回)講演大会 2024年9月18日

  11. ナトリウム冷却高速炉の炉心損傷事故時の制御棒材の共晶溶融挙動に関する研究 (39)電磁浮遊法によるその場観察と急冷法を組み合わせた30mass%B4C 含有SUS316L の凝固過程の解明

    福山博之, 東 英生, 大塚 誠, 安達正芳, 山野秀将

    日本原子力学会2024年秋の大会 2024年9月13日

  12. ナトリウム冷却高速炉の炉心損傷事故時の制御棒材の共晶溶融挙動に関する研究 (38) 黒体放射型超高温熱分析法による30mass%B4C 含有SUS316L の溶融挙動

    東 英生, 大塚 誠, 安達正芳, 福山博之, 山野秀将

    日本原子力学会2024年秋の大会 2024年9月13日

  13. ガスジェット浮遊法を用いた熱物性測定の検証のためのNi融体の粘性測定

    安達正芳, 長草生真, 大塚 誠, 渡邉匡人, 高橋純一, 福山博之

    資源・素材2024(秋田) 2024年9月10日

  14. Melting and Solidification Behavior of Type 316L Austenitic Stainless Steel Containing 30mass% B4C 国際会議

    Hiroyuki Fukuyama, Hideo Higashi, Masayoshi Adachi, Makoto Ohtsuka, Hidemasa Yamano

    Twenty-Second Symposium on Thermophysical Properties (22nd STP) 2024年6月26日

  15. Density Measurement of Ti-Mo Melt Using Electromagnetic Levitation Technique 国際会議

    Fuki Shinagawa, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    Twenty-Second Symposium on Thermophysical Properties (22nd STP) 2024年6月25日

  16. 電磁浮遊法を用いたTi-Nb合金融液の垂直分光放射率測定

    安達正芳, 小笠原 遼, 大塚 誠, 福山博之

    日本金属学会2024年春期(第174回)講演大会および日本鉄鋼協会第187回春季講演大会共同セッション 2024年3月14日

  17. 溶融Fe-Cr-Ni合金を用いた溶液成長法におけるAlN結晶の成長形態に及ぼす温度の影響

    新野田 剛, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2024年春期(第174回)講演大会 2024年3月13日

  18. 溶融Fe-Cr-Ni合金を用いた溶液成長法によるAlN結晶成長に及ぼす冷却速度の影響

    大塚 誠, 新野田 剛, 安達正芳, 福山博之

    日本金属学会2024年春期(第174回)講演大会 2024年3月13日

  19. Study of the phase diagram of MoSiBTiC alloys by optical thermal analysis and in-situ observation with electromagnetic levitation 国際会議

    Xi Nan, Ryogo Sawada, Haruki Nakashima, Masayoshi Adachi, Makoto Ohtsuka, Kyosuke Yoshimi, Hiroyuki Fukuyama

    MRM2023/IUMRS-ICA2023 Grand Meeting 2023年12月2日

  20. Density measurement of molten Ti-Mo using electromagnetic levitation technique 国際会議

    Fuki Shinagawa, Masayoshi Adachi, Makoto Otsuka, Hiroyuki Fukuyama

    National Taipei University of Technology & Tohoku University 2023 Joint Symposium 2023年12月11日

  21. Thermodynamic evaluation of solubility product of AlN in liquid Fe-Cr-Ni alloys for design of AlN solution growth method 国際会議

    Go Shinnoda, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    National Taipei University of Technology & Tohoku University 2023 Joint Symposium 2023年12月11日

  22. Thermophysical property measurement of Ti-Nb melts using electromagnetic levitation technique 国際会議

    Masayoshi Adachi, Ryo Ogasawara, Makoto Ohtsuka, Hiroyuki Fukuyama

    The 1st Conference on Creation of Materials by Super-Thermal Field (CMSTF2023) 2023年11月16日

  23. Fabrication of AlN Single Crystal by Solution Growth Method using Ferritic Stainless Steel Flux 国際会議

    Sen Li, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    14th International Conference on Nitride Semiconductors 2023 (ICNS2023) 2023年11月13日

  24. 電磁浮遊法を用いた Fe-S 融体の密度・表面張力測定

    安達正芳, 正岡諒也, 大塚 誠, 福山博之

    第44回日本熱物性シンポジウム 2023年11月9日

  25. Solution Growth of AlN single crystal in Fe-Cr flux

    李 森, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2023年秋期(第173回)講演大会 2023年9月22日

  26. 溶融Fe-Cr-Ni合金におけるAlN溶解度積の熱力学的検討

    新野田 剛, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2023年秋期(第173回)講演大会 2023年9月22日

  27. Fe-Al 融液を原料とした針状 AlN 単結晶の気相成長における温度の影響

    飴井千晃, 福山博之, 大塚 誠, 安達正芳, 得地悠希

    日本金属学会2023年秋期(第173回)講演大会 2023年9月22日

  28. 静磁場印加電磁浮遊法を用いたSi-Ge融体の熱伝導率測定

    新井佑梨, 福山博之, 大塚 誠, 安達正芳

    日本金属学会2023年秋期(第173回)講演大会 2023年9月22日

  29. 電磁浮遊法によるTi-Nb合金融体の表面張力測定

    小笠原 遼, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2023年秋期(第173回)講演大会 2023年9月22日

  30. ガスジェット浮遊法による銅マットの表面張力測定

    高橋純一, 安達正芳, 正岡諒也, 大塚 誠, 福山博之

    資源・素材2023 2023年9月13日

  31. Emissivity-free two-dimensional radiation thermometry using a high-speed CCD camera 国際会議

    Hidekazu Kobatake, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    22nd European Conference on Thermophysical Properties (ECTP2023) 2023年9月13日

  32. Specific heat capacities of Al-Si based alloys in a liquid state 国際会議

    Hiroyuki Fukuyama, Hideo Higashi, Masayoshi Adachi, Makoto Ohtsuka, Manabu Watanabe

    22nd European Conference on Thermophysical Properties (ECTP2023) 2023年9月12日

  33. Density and surface tension measurement of Ti-Nb melts using electromagnetic levitation technique 国際会議

    Ryo Ogasawara, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    22nd European Conference on Thermophysical Properties (ECTP2023) 2023年9月11日

  34. Thermodynamic evaluation of solubility product of AlN in liquid Fe-Cr-Ni alloys for design of AlN solution growth method 国際会議

    Go Shinnoda, Park Minsoo, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    22nd European Conference on Thermophysical Properties (ECTP2023) 2023年9月11日

  35. Solidification process of SS316L containing B4C by a combination of ultra-high temperature thermal analysis and microstructural observation 国際会議 招待有り

    Hiroyuki Fukuyama, Hideo Higashi, Masayoshi Adachi, Makoto Ohtsuka, Hidemasa Yamano

    22nd European Conference on Thermophysical Properties (ECTP2023) 2023年9月11日

  36. Surface tension measurement of Cu2S-FeS melts by aerodynamic and electromagnetic levitation techniques 国際会議

    Masayoshi Adachi, Ryoya Masaoka, Masahito Watanabe, Makoto Ohtsuka, Jun-ichi Takahashi, Hiroyuki Fukuyama

    22nd European Conference on Thermophysical Properties (ECTP2023) 2023年9月11日

  37. ナトリウム冷却高速炉の炉心損傷事故時の制御棒材の共晶溶融挙動に関する研究 (35) 電磁浮遊法によるその場観察と急冷法を組み合わせた14, 17 mass%B4C含有SUS316Lの凝固過程の解明

    福山博之, 東 英生, 大塚 誠, 安達正芳, 山野秀将

    日本原子力学会 2023年秋の大会 2023年9月6日

  38. ナトリウム冷却高速炉の炉心損傷事故時の制御棒材の共晶溶融挙動に関する研究 (34) 黒体放射型超高温熱分析法による14, 17 mass%B4C含有SUS316Lの溶融・凝固挙動の解析

    東 英生, 大塚 誠, 安達正芳, 福山博之, 山野秀将

    日本原子力学会 2023年秋の大会 2023年9月6日

  39. Multilayer Fe3O4 doped ITO indium saving indium tin oxide thin films sputtered on preheated substrates 国際会議 国際共著

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    International research and practice conference “Nanotechnology and nanomaterials” NANO-2023 2023年8月18日

  40. Comparative study of RF sputtered Fe2O3- and Fe3O4-doped indium saving indium tin oxide thin films 国際会議 国際共著

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    International research and practice conference “Nanotechnology and nanomaterials” NANO-2023 2023年8月18日

  41. Solidification paths and phase diagram of ZrC-added Mo-Si-B alloys 国際会議 招待有り

    Hiroyuki Fukuyama, Tsukasa Nishikori, Makoto Ohtsuka, Kyosuke Yoshimi

    Beyond Nickel-Based Superalloys IV International Conference 2023年6月28日

  42. Optical, Electrical Properties and Structure of Undoped and M2O3 (M=Fe, Al)-doped Multilayer Indium Saving Indium Tin Oxide Thin Films 国際会議 国際共著

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    Мaterials and Technologies in Engineering (MTE-2023) 2023年5月17日

  43. 静磁場印加電磁浮遊法を用いたSi-Ge融体の定圧モル熱容量測定

    新井佑梨, 大塚 誠, 安達正芳, 福山博之

    日本金属学会2023年春期(第172回)講演大会 2023年3月10日

  44. Ni-Alフラックス法によるAlNの結晶成長挙動に及ぼす坩堝材の影響

    朴 珉秀, 大塚 誠, 安達正芳, 福山博之

    日本金属学会2023年春期(第172回)講演大会 2023年3月10日

  45. 静磁場印加電磁浮遊法によるTi-Nb合金融体の密度測定

    小笠原 遼, 安達 正芳, 大塚 誠, 福山 博之

    日本金属学会2023年春期(第172回)講演大会 2023年3月9日

  46. 静磁場印加電磁浮遊法を用いたFe-S融体の密度測定

    安達 正芳, 正岡 諒也, 大塚 誠, 福山 博之

    日本金属学会2023年春期(第172回)講演大会 2023年3月9日

  47. Synthesis of AlN Single Crystal by Solution Growth Method in SUS430 Flux

    李 森, 大塚 誠, 安達正芳, 福山博之

    日本金属学会2023年春期(第172回)講演大会 2023年3月9日

  48. Thermophysical properties of Al-Si based alloys in the molten state for thermal energy storage system design 国際会議 招待有り

    Hiroyuki Fukuyama, Hideo Higashi, Masayoshi Adachi, Makoto Ohtsuka

    THANOS Workshop on thermal energy strage 2023年2月21日

  49. Crystal growth of AlN using metallic solutions

    Go Shinnoda, Taichi Nagasaku, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    Tohoku-Melbourne Joing Workshop in Materials Science 2022年11月23日

  50. Vaper phase growth of needle-shaped AlN single crystals using Fe-Al melt as a source material

    Chiaki Amei, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    Tohoku-Melbourne Joing Workshop in Materials Science 2022年11月23日

  51. Normal spectral emissivity and heat capacity measuremsnts of Si-Ge melts using the electromagnetic levitation method

    Yuri Arai, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    Tohoku-Melbourne Joing Workshop in Materials Science 2022年11月23日

  52. 静磁場印加電磁浮遊法を用いた Si-Ge 融体の垂直分光放射率及びモル熱容量の測定

    新井佑梨, 大塚 誠, 安達正芳, 福山博之

    第4回環境科学討論会 2022年10月28日

  53. Fe-Al 融液を原料とした気相成長による針状 AlN 単結晶の作製

    飴井千晃, 得地悠希, 安達正芳, 大塚 誠, 福山博之

    第4回環境科学討論会 2022年10月28日

  54. 電磁浮遊法による, Ti-Nb, 系合金融体の密度および表面張力測定

    小笠原 遼, 安達正芳, 大塚 誠, 福山博之

    第4回環境科学討論会 2022年10月28日

  55. Surface tension measurement of copper matte melts using an aerodynamic levitation technique

    Masayoshi Adachi, Masahito Watanabe, Makoto Ohtsuka, Jun-ichi Takahashi, Hiroyuki Fukuyama

    The 13th Asian Thermophysical Properties Conference (ATPC2022) 2022年9月28日

  56. Emissivity-free temperature measurement for electromagnetically levitated liquid metals using a dual-wavelength reflectance-ratio method

    H. Kobatake, M. Iwabuchi, Y. Kurokawa, M. Ohtsuka, M. Adachi, H. Fukuyama, N. Sasajima, Y. Yamada

    The 13th Asian Thermophysical Properties Conference (ATPC2022) 2022年9月28日

  57. 固体BNを利用したNi-Al溶融合金からのAlN合成における高温反応挙動

    大塚 誠, 朴 珉秀, 福山博之

    日本金属学会2022年秋期(第171回)講演大会 2022年9月22日

  58. Growth Behavior of AlN on AlN/Sapphire Substrates by Solution Growth Using Molten Ni-Al Alloy

    Minsoo PARK, Makoto OHTSUKA, Masayoshi ADACHI, Hiroyuki FUKUYAMA

    日本金属学会2022年秋期(第171回)講演大会 2022年9月22日

  59. 静磁場印加電磁浮遊法を用いたSi-Ge融体の垂直分光放射率測定

    新井佑梨, 大塚 誠, 安達正芳, 福山博之

    日本金属学会2022年秋期(第171回)講演大会 2022年9月20日

  60. 静磁場印加電磁浮遊法によるTi-Nb系合金融体の垂直分光放射率測定

    小笠原 遼, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2022年秋期(第171回)講演大会 2022年9月20日

  61. ナトリウム冷却高速炉の炉心損傷事故時の制御棒材の共晶溶融挙動に関する研究 (31) 電磁浮遊法によるその場観察と急冷法を組み合わせた9-11mass%B4C含有SUS316Lの凝固過程の解明

    福山博之, 東 英生, 大塚 誠, 安達正芳, 山野秀将

    日本原子力学会 2022年秋の大会 2022年9月7日

  62. ナトリウム冷却高速炉の炉心損傷事故時の制御棒材の共晶溶融挙動に関する研究 (30) 黒体放射型超高温熱分析法による9-11mass%B4C含有SUS316Lの溶融挙動

    東 英生, 大塚 誠, 安達正芳, 福山博之, 山野秀将

    日本原子力学会 2022年秋の大会 2022年9月7日

  63. ガスジェット浮遊法を用いたCu2S-FeS融体の表面張力測定

    安達正芳, 正岡諒也, 大塚 誠, 渡邉匡人, 高橋純一, 福山博之

    資源・素材2022 2022年9月6日

  64. Properties of multilayer aluminum-doped indium saving ITO thin films deposited by sputtering method 国際会議 国際共著

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    International research and practice conference “Nanotechnology and nanomaterials” NANO-2022 2022年8月26日

  65. Iron-doped indium-saving indium tin oxide thin films deposited by DC sputtering method using Fe3O4 target 国際会議 国際共著

    Svitlana Petrovska, Ruslan Sergiienko, Bogdan Ilkiv, Takashi Nakamura, Makoto Ohtsuka

    International research and practice conference “Nanotechnology and nanomaterials” NANO-2022 2022年8月26日

  66. 静磁場印加電磁浮遊法を用いたFe-10 mol% S融体の密度測定

    正岡諒也, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2022年春期 (第170回) 講演大会 2022年3月17日

  67. Ni-Alフラックスを用いた単結晶AlNの液相成長

    永作太一, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2022年春期 (第170回) 講演大会 2022年3月17日

  68. Fe-Al融液を原料とした針状AlN単結晶の成長

    飴井千晃, 得地悠希, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2022年春期 (第170回) 講演大会 2022年3月17日

  69. Ni-Al融液を用いたAlN/サファイアテンプレート基板上へのAlN成長

    宮田麟太郎, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2022年春期 (第170回) 講演大会 2022年3月16日

  70. Ni-AlフラックスからのAlNの結晶成長

    安達正芳, 宮田麟太郎, 永作太一, 李 森, 大塚 誠, 福山博之

    第21回東北大学多元物質科学研究所研究発表会 2021年10月9日

  71. Ni-Alを用いたAlN結晶の液相成長技術開発のための融液熱物性測定と熱流体解析

    安達正芳, 藤田一輝, 大塚 誠, 福山博之

    日本金属学会2021年秋期 (第169回) 講演大会 2021年9月16日

  72. 浮遊法を用いたCu2SおよびFeS融体の熱物性測定

    安達正芳, 正岡諒也, 大塚 誠, 渡邉匡人, 高橋純一, 福山博之

    資源・素材 2021 2021年9月14日

  73. In-situ observation of AlN crystal formation on Ni-Al droplets by electromagnetic levitation technique

    Zhou Xinyu, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    一般社団法人 資源・素材学会 東北支部2021 (令和3) 年度 春季大会 2021年6月9日

  74. In-situ observation of AlN formation behavior on Ni-30 mol% Al solution

    Zhou Xinyu, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    第20回多元物質科学研究発表会 2020年12月3日

  75. Low-Field Modeling of Heusler MultiPhysic Memory Alloys

    Mickaël LALLART, Hiroyuki MIKI, Linjuan YAN, Gildas DIGUET, Makoto OHTSUKA, Gaël SEBALD

    The 20th International Symposium on Advanced Fluid Information (AFI-2020) 2020年10月29日

  76. Fe-Al融液表面でのAlN結晶の生成・成長挙動

    山形武史, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2020年秋期(第167回)講演大会 2020年9月18日

  77. 超高温X線回折によるMoSiBTiC合金の相生成・消滅過程の直接測定

    大石泰生, 平尾直久, 福山博之, 大塚 誠, 澤田龍伍, 中島治樹, 吉見享祐

    日本金属学会2020年秋期(第167回)講演大会 2020年9月17日

  78. 先端計測技術が拓く超高温材料科学 招待有り

    福山博之, 大塚 誠, 吉見享祐

    日本金属学会2020年秋期(第167回)講演大会 2020年9月17日

  79. 2波長反射率比法による固体Pt球の放射率フリー温度測定

    大塚 誠, 合戸信之介, 笹嶋尚彦, 山田善郎, 福山博之

    日本金属学会2020年秋期(第167回)講演大会 2020年9月17日

  80. 溶融Co-Cr-Mo系合金の表面張力に及ぼす炭素組成の影響

    今泉冴香, 大塚 誠, 安達正芳, 渡邉 学, 趙宇凡, 千葉晶彦, 小泉雄一郎, 福山博之

    日本金属学会2020年秋期(第167回)講演大会 2020年9月17日

  81. 溶融Ni-Al合金の半球全放射率の測定

    藤田一輝, 安達正芳, 大塚 誠, 福山博之

    日本金属学会2020年秋期(第167回)講演大会 2020年9月17日

  82. ガスジェット浮遊技術を用いたCu2S融体の熱物性測定

    安達正芳, 後藤宏樹, 大塚 誠, 渡邉匡人, 高橋純一, 福山博之

    資源・素材2020 2020年9月8日

  83. 2波長反射率比法の電磁浮遊金属液滴への適用に向けた選択波長の影響

    大塚 誠, 合戸信之介, 笹嶋尚彦, 山田善郎, 福山博之

    日本金属学会2020年春期(第166回)講演大会および日本鉄鋼協会第179回春季講演大会 共同セッション 2020年3月19日

  84. Fe-Al融液からのAlN結晶成長のその場観察

    山形武史, 安達正芳, 大塚誠, 福山博之

    日本金属学会2020年春期(第166回)講演大会および日本鉄鋼協会第179回春季講演大会 共同セッション 2020年3月19日

  85. Ni-Alフラックスを用いたAlN結晶成長

    安達正芳, 神原 新, 大塚 誠, 福山博之

    日本金属学会2020年春期(第166回)講演大会 2020年3月18日

  86. 電磁浮遊法を用いた溶融Co-Cr-Mo系合金の表面張力測定

    今泉冴香, 大塚 誠, 安達正芳, 渡邉 学, 趙 宇凡, 小泉雄一郎, 千葉晶彦, 福山博之

    日本金属学会2020年春期(第166回)講演大会 2020年3月17日

  87. ZrC添加Mo-Si-B合金の凝固経路の検討

    錦織 司, 大塚 誠, 福山博之, 吉見享祐

    第19回東北大学多元物質科学研究所研究発表会 2019年12月12日

  88. Mechanism of AlN Fabrication by Substitutional Reaction between Al Layer and GaN Substrate 国際会議

    Marsetio Noorprajuda, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    The 9th Asia-Pacific Workshop on Widegap Semiconductors (APWS2019) 2019年11月12日

  89. アクチュエータへの適用を目的とした形状記憶合金の材料改質 国際共著

    三木寛之, 武田 翔, 大塚 誠, Marcel Gültig, Manfred Kohl, 小助川博之, 高木敏行

    日本機械学会 M&M2019材料⼒学カンファレンス 2019年11月2日

  90. 放射率フリー温度計測法の電磁浮遊液滴への適用

    大塚 誠, 合戸信之介, 福山博之

    人・環境と物質をつなぐイノベーション創出ダイナミック・アライアンス ~環境エネルギー 物質・デバイス・プロセス(G2)グループ分科会 2019年10月3日

  91. Cu2S融体の非接触熱物性測定

    安達正芳, 後藤宏基, 大塚 誠, 高橋純一, 福山博之

    資源・素材2019 2019年9月24日

  92. ZrC添加Mo-Si-B合金の凝固パスの検討

    錦織 司, 大塚 誠, 福山博之, 吉見享祐

    日本金属学会2019年秋期(第165回)講演大会 2019年9月12日

  93. 2波長反射率比法の電磁浮遊液滴への適用にむけた課題抽出

    合戸信之介, 大塚 誠, 福山博之

    日本金属学会2019年秋期(第165回)講演大会 2019年9月11日

  94. Ultrahigh-temperature thermal analysis combined with in-situ observation: Revealing solidification process of a MoSiBTiC alloy 国際会議

    Hiroyuki Fukuyama, Ryogo Sawada, Haruki Nakashima, Makoto Ohtsuka, Kyosuke Yoshimi

    Workshop on Ultrahigh Temperature Materials 2019 2019年6月17日

  95. AlN Formation by Substitutional Reaction between Al Layer and GaN Substrate

    Marsetio Noorprajuda, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    一般社団法人資源・素材学会東北支部令和元年度春季大会 2019年6月14日

  96. ZrC添加Mo-Si-B合金における凝固パスの検討

    錦織 司, 大塚 誠, 吉見享祐, 福山博之

    一般社団法人資源・素材学会東北支部令和元年度春季大会 2019年6月14日

  97. 2波長反射率比法による電磁浮遊Ni液滴の温度計測技術

    合戸信之介, 岩渕将也, 大塚 誠, 福山博之

    一般社団法人資源・素材学会東北支部令和元年度春季大会 2019年6月14日

  98. Composition dependence of normal spectral emissivity of liquid Ni-Al alloys measured by electromagnetic levitation technique 国際会議

    Masayoshi Adachi, Yuji Yamagata, Makoto Ohtsuka, Hiroyuki Fukuyama

    12th International Workshop on Subsecond Thermophysics (IWSSTP 2019) 2019年6月6日

  99. Recent studies in material process and measurement with PROSPECT 国際会議

    Hiroyuki Fukuyama, Manabu Watanabe, Masayoshi Adachi, Makoto Ohtsuka

    12th International Workshop on Subsecond Thermophysics (IWSSTP2019) 2019年6月4日

  100. 静磁場印加電磁浮遊法を用いた溶融Co-Cr-Mo系合金の熱伝導率測定

    大塚 誠, 高橋侑希, 小泉雄一郎, 趙 宇凡, 千葉晶彦, 福山博之

    日本金属学会2019年春期(第164回)講演大会 2019年3月21日

  101. TiCを添加したMo-Si-B合金の部分状態図と凝固過程

    H. Fukuyama, M. Ohtsuka, R. Sawada, H. Nakashima, K. Yoshimi

    第28回日本MRS年次大会 2018年12月19日

  102. Synthesis of Cu2S melt for surface tension measurement using electromagnetic levitation technique 国際会議

    H. Goto, M. Adachi, M. Ohtsuka, H. Fukuyama

    International Symposium on "New Horizon in Advanced Materials" Kick off Symposium of Academic Exchange 2018年12月3日

  103. Consideration of Complicated Solidification Paths of ZrC‐added Mo-Si-B Alloys 国際会議

    T. Nishikori, M. Ohtsuka, K. Yoshimi, H. Fukuyama

    International Symposium on "New Horizon in Advanced Materials" Kick off Symposium of Academic Exchange 2018年12月3日

  104. Applicatlon of Dual-Wavelength Reflectance-Ratio (DWR) Method to Electromagnetic Levitated Nickel Melt 国際会議

    S. Gohto, M. Ohtsuka, M. Adachi, M. lwabuchi, H. Fukuyama

    International Symposium on "New Horizon in Advanced Materials" Kick off Symposium of Academic Exchange 2018年12月3日

  105. Phase Diagrams and Solidification Paths of MoSiBTiC Alloys 国際会議

    Ryogo Sawada, Makoto Ohtsuka, Haruki Nakashima, Kyosuke Yoshimi, Hiroyuki Fukuyama

    2018 MRS Fall Meeting & Exhibit 2018年11月27日

  106. Effect of Polarity of GaN Substrate on AlN Formation Temperature by Substitutional Reaction between Al Layer and GaN Substrate

    Marsetio Noorprajuda, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    4th Intensive Discussion on Growth of Nitride Semiconductors (IDGN-4) 2018年11月20日

  107. AlN Formation by Interfacial Reaction between Al Layer and GaN Substrate 国際会議

    Marsetio Noorprajuda, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    International Workshop on Nitride Semiconductors (IWN 2018) 2018年11月15日

  108. 2波長反射率比法による電磁浮遊液滴の放射率フリー温度測定

    岩渕将也, 大塚誠, 福山博之, 小畠秀和, 笹嶋尚彦, 山田善郎

    第39回日本熱物性シンポジウム 2018年11月13日

  109. 溶融Ni-Al合金の垂直分光放射率測定

    山片裕司, 大塚誠, 安達正芳, 福山博之

    第39回日本熱物性シンポジウム 2018年11月13日

  110. Ni-Mn-X (X = Ga, In) 強磁性形状記憶合金膜の高機能化と新規デバイスへの展開

    大塚 誠

    日本金属学会2018年秋期(第163回)講演大会 2018年9月20日

  111. 静磁場印加電磁浮遊法を用いた溶融 Co-Cr-Mo 系合金の垂直分光放射率および定圧モル熱容量測定

    高橋侑希, 大塚 誠, 小泉雄一郎, 趙 宇凡, 千葉晶彦, 福山博之

    日本金属学会2018年秋期(第163回)講演大会 2018年9月20日

  112. Application of Dual-Wavelength Reflectance-Ratio Method to Electromagnetic Levitated Liquid Metals 国際会議

    Iwabuchi Masaya, Kurokawa Yuma, Kobatake Hidekazu, Ohtsuka Makoto, Fukuyama Hiroyuki, Yamaguchi Yu, Sasajima Naohiko, Yamada Yoshiro

    SICE Annual Conference 2018 2018年9月12日

  113. Effect of Reaction Temperature on AlN Formation at Interface of Al Layer Deposited on GaN Substrate

    Marsetio Noorprajuda, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    International Symposium on Growth of III-Nitrides (ISGN-7) 2018年8月7日

  114. In-Situ Observation of Liquid Phase Epitaxial Growth of an AlN Layer by Optical Microscopy 国際会議

    Masayoshi Adachi, Keigo Fujiwara, Hidekazu Kobatake, Makoto Ohtsuka, Hiroyuki Fukuyama

    Twentieth Symposium on Thermophysical Properties 2018年6月28日

  115. Density Measurement of a Co-Cr-Mo Melt with an Electromagnetic Levitation Technique in a Static Magnetic Field 国際会議

    Yuki Takahashi, Makoto Ohtsuka, Yuichiro Koizumi, Yufan Zhao, Akihiko Chiba, Hiroyuki Fukuyama

    Twentieth Symposium on Thermophysical Properties 2018年6月27日

  116. Measurements of Density and Evaporation Rate of Ti-6Al-4V Melt with a Electromagnetic Levitation Technique 国際会議

    Suguru Funada, Makoto Ohtsuka, Hiroyuki Fukuyama

    Twentieth Symposium on Thermophysical Properties 2018年6月26日

  117. 静磁場印加電磁浮遊法を用いた溶融Ti-6Al-4V合金の密度・蒸発速度測定

    船田 卓, 大塚 誠, 福山博之

    日本鉄鋼協会第175回春季講演大会 2018年3月20日

  118. Ni-C共晶点による分光器の校正と溶融Ni-Al合金の垂直分光放射率測定

    山片裕司, 大塚 誠, 安達正芳, 福山博之

    日本鉄鋼協会第175回春季講演大会 2018年3月20日

  119. Co-Cr-Mo系合金の液相線温度と溶融状態における密度の評価

    高橋侑希, 大塚 誠, 小泉雄一郎, 趙 宇凡, 千葉晶彦, 福山博之

    日本金属学会2018年春期(第162回)講演大会 2018年3月20日

  120. 黒体放射を用いた熱分析法による10 mol%TiC含有Moss-T2-TiC合金の高温状態図の検討

    澤田龍伍, 中島治樹, 大塚 誠, 宮田龍一, 吉見享祐, 福山博之

    日本金属学会2018年春期(第162回)講演大会 2018年3月20日

  121. 静磁場印加電磁浮遊法を用いたMoss初晶MoSiBTiC合金浮遊液滴の凝固組織

    大塚 誠, 中島治樹, 澤田龍伍, 宮田龍一, 吉見享祐, 福山博之

    日本金属学会2018年春期(第162回)講演大会 2018年3月20日

  122. 2波長反射率比法による電磁浮遊金属液滴の温度測定

    岩渕将也, 黒川佑馬, 小畠秀和, 大塚 誠, 福山博之, 笹嶋尚彦, 山口 祐, 山田善郎

    日本金属学会2018年春期(第162回)講演大会 2018年3月19日

  123. 電磁浮遊法を用いた溶融Ni-AlからのAlN生成その場観察

    安達正芳, 浜谷苑子, 山片裕司, 大塚 誠, 福山博之

    第65回応用物理学会春季学術講演会 2018年3月18日

  124. Thickness Dependence on Crystalline Quality and Residual Stresses of AlN Films Deposited by Pulsed DC Reactive Sputtering

    Noorprajuda Marsetio, Makoto Ohtsuka, Masayoshi Adachi, Hiroyuki Fukuyama

    第65回応用物理学会春季学術講演会 2018年3月18日

  125. ガスジェット浮遊法による溶融Niの粘度および表面張力測定

    長草生真, 安達正芳, 大塚 誠, 福山博之

    2024 (令和6) 年度 資源・素材学会 東北支部 総会・春季大会 2024年6月14日

  126. 溶融Fe-Nb合金へのAlNの溶解平衡測定

    南里駿也, 新野田剛, 大塚誠, 安達正芳, 福山博之

    2024 (令和6) 年度 資源・素材学会 東北支部 総会・春季大会 2024年6月14日

  127. Crystal plane dependence of single-crystalline AlN growth behavior from Ni-Al flux

    Taichi Nagasaku, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    2021 Annual joint symposium Tohoku University & National Taipei University of Technology 2021年11月30日

  128. Thermophysical property measurement and numerical heat and fluid flow simulation of liquid Ni-Al for development of AlN growth technique

    Kazuki Fujita, Masayoshi Adachi, Makoto Ohtsuka, Hiroyuki Fukuyama

    2020 ONLINE JOINT SYMPOSIUM Engineer a Better Tomorrow 2020年11月30日

︎全件表示 ︎最初の5件までを表示

産業財産権 14

  1. 窒化アルミニウム結晶の製造方法

    安達 正芳, 福山 博之, 大塚 誠, 神原 新

    特許第7599643号

    産業財産権の種類: 特許権

  2. AlN単結晶の製造方法、AlN単結晶、およびAlN単結晶製造装置

    福山 博之, 大塚 誠, 安達 正芳, 宮田 麟太郎, 渡邉 康弘

    特許第7448925号

    産業財産権の種類: 特許権

  3. 窒化アルミニウム結晶の製造方法

    福山 博之, 大塚 誠, 安達 正芳, マルセティオ ノープラジュダ, 菅野 直樹

    特許第7106108号

    産業財産権の種類: 特許権

  4. 透明導電積層体付基板及びその製造方法

    中村 崇, 大塚 誠, ボイジン アラベナ, レアンドロ, アンドレス

    特許第5780550号

    産業財産権の種類: 特許権

  5. 透明導電積層体付基板及びその製造方法

    中村 崇, 大塚 誠, ボイジン アラベナ, レアンドロ, アンドレス

    産業財産権の種類: 特許権

    詳細を見る 詳細を閉じる

    基板の表面上に酸化インジウムを含有する透明導電積層体が形成された透明導電積層体付基板であって、前記透明導電積層体は、酸化インジウム含有量が80~98質量%である第一の透明導電膜と前記第一の透明導電膜の表面上に積層された酸化インジウムの含有量が45~75質量%である第二の透明導電膜とを備え、且つ、前記第一の透明導電膜及び前記第二の透明導電膜が酸化インジウム結晶と同等の結晶構造を持つ結晶を有していることを特徴とする透明導電積層体付基板。

  6. 窒化アルミニウム単結晶の製造方法および窒化アルミニウム単結晶

    福山 博之, 大塚 誠, 安達 正芳, 李 森, 新野田 剛, 渡邉 康弘

    産業財産権の種類: 特許権

  7. AlN単結晶の製造方法およびAlN単結晶

    福山 博之, 大塚 誠, 安達 正芳, 朴 ▲民▼秀, 渡邉 康弘

    産業財産権の種類: 特許権

  8. 窒化アルミニウム単結晶の製造方法および窒化アルミニウム単結晶製造装置

    安達 正芳, 福山 博之, 大塚 誠, 得地 悠希, 飴井 千晃

    産業財産権の種類: 特許権

  9. AlN単結晶の製造方法、AlN単結晶、およびAlN単結晶製造装置

    福山 博之, 大塚 誠, 安達 正芳, 宮田 麟太郎, 渡邉 康弘

    産業財産権の種類: 特許権

  10. 窒化アルミニウム結晶の製造方法

    安達 正芳, 福山 博之, 大塚 誠, 神原 新

    産業財産権の種類: 特許権

  11. 窒化アルミニウム結晶の製造方法

    福山博之, 大塚 誠, 安達正芳, マルセティオ ノープラジュダ, 菅野直樹

    産業財産権の種類: 特許権

    詳細を見る 詳細を閉じる

    【課題】均一で大きい窒化アルミニウム結晶を、比較的容易に製造することができる窒化アルミニウム結晶の製造方法を提供する。【解決手段】GaN結晶とAlとを接触させ、GaN結晶中のGaとAlとの置換反応により窒化アルミニウム結晶を生成する。GaN結晶を、Alの融液またはAlを含む合金の融液に浸漬させ、置換反応により窒化アルミニウム結晶を生成してもよく、GaN結晶の表面にAlの膜を形成した後、熱処理を行い、置換反応により窒化アルミニウム結晶を生成してもよい。【選択図】図6

  12. 導電性酸化物及びその製造方法、並びにそれを用いた透明導電膜

    中村 崇, 柴田 悦郎, 大塚 誠

    産業財産権の種類: 特許権

  13. Ni-Mn-Ga系形状記憶合金とその製造方法

    内山 博昭, 山内 清, 高木 敏行, 三木 寛之, 大塚 誠, 松本 實

    産業財産権の種類: 特許権

  14. Ni−Mn−Ga系形状記憶合金薄膜とその製造方法

    内山 博昭, 山内 清, 高木 敏行, 三木 寛之, 大塚 誠, 松本 實

    特許第4231188号

    産業財産権の種類: 特許権

︎全件表示 ︎最初の5件までを表示

共同研究・競争的資金等の研究課題 10

  1. ニッケル基合金薄膜の構造と力学的性質に関する研究 競争的資金

    制度名:The Other Research Programs

    1997年4月 ~ 継続中

  2. 強磁性形状記憶合金薄膜の作製とその評価 競争的資金

    制度名:Grant-in-Aid for Scientific Research

    1997年4月 ~ 継続中

  3. 水素透過膜の作製とその機械的特性 競争的資金

    制度名:The Other Research Programs

    1994年4月 ~ 継続中

  4. 金属熱還元法による機能性合金微粒子の直接製造 競争的資金

    制度名:The Other Research Programs

    1992年4月 ~ 継続中

  5. 自由度拡張がもたらす未踏反応場を利用した窒化物半導体結晶成長の学理構築

    福山 博之, 大塚 誠, 中村 哲也

    提供機関:Japan Society for the Promotion of Science

    制度名:Grants-in-Aid for Scientific Research

    研究種目:Grant-in-Aid for Scientific Research (A)

    研究機関:Tohoku University

    2021年4月5日 ~ 2026年3月31日

  6. メタ磁性形状記憶合金の薄膜化と磁場駆動アクチュエータ材料の開発

    大塚 誠, 貝沼 亮介, 高木 敏行, 小山 佳一, 貝沼 亮介

    提供機関:Japan Society for the Promotion of Science

    制度名:Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    研究種目:Grant-in-Aid for Scientific Research (B)

    研究機関:Tohoku University

    2008年 ~ 2010年

    詳細を見る 詳細を閉じる

    メタ磁性形状記憶合金の一例としてNi-Mn-X(X=In,Sn)系合金をスパッタ法により薄膜化した.得られた合金薄膜は熱処理により,磁気変態と構造相変態(マルテンサイト変態)を同時に実現できた.また,合金薄膜の組成制御により,マルテンサイト変態温度を室温以上で,かつ,キュリー温度以下に調整することができた.そこで,本系合金薄膜は,高速応答と遠隔操作の可能な磁場駆動アクチュエータ材料への応用が期待できる.

  7. 強磁性形状記憶合金膜における磁場誘起形状記憶効果の評価とその機構解明

    大塚 誠, 村上 恭和, 板垣 乙未生

    提供機関:Japan Society for the Promotion of Science

    制度名:Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    研究種目:Grant-in-Aid for Scientific Research (B)

    研究機関:Tohoku University

    2004年 ~ 2006年

    詳細を見る 詳細を閉じる

    強磁性形状記憶合金は,強磁性と形状記憶効果(SME)の2つの機能を併せ持つ多機能材料であり,磁場駆動アクチュエータ材料への応用が期待される.磁場誘起SMEは高速応答と遠隔操作を可能にする.本研究では,組成の異なるNi_2MnGa合金スパッタ膜を作製し,SMEを発現させるために拘束時効処理を施し,SMEに及ぼす組成の影響を調査した.なお,合金膜のマルテンサイト(M)変態温度は室温以上で,かつ,キュリー温度(T_C)以下に制御した.また,本合金膜を実用化する際に重要な機械的特性に及ぼす温度および磁場の影響を調査した.さらに,実用的な低磁場で動作する強磁性形状記憶合金膜を開発するために,磁気的性質の向上が期待される強磁性元素であるFeを添加したNi_2MnGa合金スパッタ膜を作製し,その構造ならびにSMEに及ぼす磁場の影響を調査した. 得られたNi_2MnGa合金膜はいずれもM変態および逆変態に起因して温度変化に伴う可逆的な2方向SMEを示した.1K当たりのひずみ変化量が大きく,温度ヒステリシスが小さい拘束時効処理膜では,冷却過程のM変態温度近傍に温度を保持した場合,0〜5Tの磁場の印加-除去に伴い2方向SMEが確認された.また,Fe添加に伴い合金膜のM変態温度は低下し,T_Cは上昇した.得られたFe添加膜はいずれも無添加膜と同様に,温度変化に伴い2方向SMEが発現した.Fe添加膜に対して強磁場中X線回折を行った結果,磁場誘起M変態が生じることを直接的に確認した.さらに,冷却過程のM変態温度近傍に温度を保持した場合,温度一定下で1Tの磁場印加に伴うひずみ変化は,無添加膜では5Tの磁場印加の20%程度であったが,Fe添加膜では約40%と増大することがわかった.このことから,Fe添加により磁場誘起M変態が起こりやすくなり,低磁場でより大きな変形ひずみが得られることが明らかとなった.

  8. 多機能性ニッケル−マンガン−ガリウム合金薄膜の作製およびその特性評価

    大塚 誠

    提供機関:Japan Society for the Promotion of Science

    制度名:Grants-in-Aid for Scientific Research Grant-in-Aid for Encouragement of Young Scientists (A)

    研究種目:Grant-in-Aid for Encouragement of Young Scientists (A)

    研究機関:Tohoku University

    1998年 ~ 1998年

  9. 強磁性体形状記憶合金Ni_2MnGaの薄膜作製とマイクロアクチエーターの開発

    松本 實, 高木 敏行, 谷 順二, 大塚 誠

    提供機関:Japan Society for the Promotion of Science

    制度名:Grants-in-Aid for Scientific Research Grant-in-Aid for Exploratory Research

    研究種目:Grant-in-Aid for Exploratory Research

    研究機関:Tohoku University

    1996年 ~ 1998年

    詳細を見る 詳細を閉じる

    スパッタリング法により強磁性形状記憶合金Ni_2MnGa薄膜を作製し,物性を測定した.薄膜作製条件としてのターゲット組成,高周波電力,基板および基板温度などを種々変化させ,試料作製の最適条件を求めた.Ni,MnおよびGaの組成を変えたターゲットを用い,電力と膜厚および組成の関係を求めることにより合金組成の制御を行った.基板は無機および有機物を用い,基板温度と製膜条件を求めた.得られた薄膜は膜厚が1〜5μmで,ICPにより組成分析を行い,合金組成を決定した.スパッタリング法により結晶性の良い試料が得られたが,さらに熱処理を行い規則格子合金を作製した.物性としては変態温度,結晶構造とその温度変化および磁化の温度変化を示差走査熱量計,X線回折装置およびSQUID磁化測定装置を用いて測定した.その結果,変態温度(Ms,Mf,AsおよびAf)およびキューリー温度の値はバルク材と類似していることを明らかにした.また,バルク材と比べスパッタリングNi_2MnGa薄膜は脆性が小さい. 以上の結果,作製したスパッタリングNi_2MnGa薄膜はマイクロマシーンのマイクロアクチュエーターとして開発可能な素子である.

  10. 金属熱還元法によるZr-Ni-Mn系水素吸蔵合金の直接製造法の開発

    板垣 乙未生, 大塚 誠, 日野 光久

    提供機関:Japan Society for the Promotion of Science

    制度名:Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    研究種目:Grant-in-Aid for Scientific Research (B)

    研究機関:TOHOKU UNIVERSITY

    1995年 ~ 1996年

    詳細を見る 詳細を閉じる

    1.研究目的 カルシウムを還元剤として用い,酸化ジルコニウム,二酸化マンガンなどの原料からZr-Ni-Mn系の水素吸蔵合金粉末を直接的に製造する金属熱還元法(還元拡散法)を開発するため,合金の組織や組成と水素吸蔵特性との関係および合金生成機構などを明らかにする。 2.Zr-Ni-Mn3元系合金の組織・組成と水素吸蔵特性 アーク炉により溶製した各種Zr-Ni-Mn3元系合金の組成および組織と水素吸蔵特性との関係を系統的に調べ,合金組織としては副相を無くして単相化を図ることが必要とされること,副相が丁度消失する境界上の42.2%Zr-29.9%Ni-27.9%Mnおよび44.4%Zr-34.3%Ni-21.3%Mnの組成を有する合金が水素吸蔵合金として最も優れた特性を有することなどが明きらかになった。 3.金属熱還元法による合金生成の機構 44.4%Zr-34.3%Ni-21.3%Mnの組成を有する合金粒子の1273-1423Kの温度域における生成機構を調べた結果,合金粒子の生成が,固相Ni中へのZrやMnの反応拡散によるものではなく,Ca融体中へのNiの溶解反応と溶融Ni-Ca合金中のNiと固相Zr,Mnとの不均一系反応によるものであることが明らかとなった。また,金属熱還元法により作成された合金粒子の水素吸蔵量が,アーク炉溶製により作成されたものよりはかなり少なく,水素透過を困難にしていると考えられる合金表面上酸化膜を除去することが,水素吸蔵特性を向上させるうえで必須の課題であることが分かった。

︎全件表示 ︎最初の5件までを表示

その他 2

  1. 電磁形状記憶材料を用いた次世代マイクロアクチュエータデバイスの開発

    詳細を見る 詳細を閉じる

    本研究では,電磁場を感知して動作する形状記憶合金材料を開発し,これをアクチュエータへ応用し,これまでにない多機能性を有する次世代マイクロアクチュエータ用デバイスを創製することを目的とする.

  2. 強磁性体形状記憶合金薄膜の機械的性質

    詳細を見る 詳細を閉じる

    センサーやアクチュエータ用の形状記憶素子として本合金薄膜の実用化を考えた場合には,その機械的特性は非常に重要である.そこで,本研究では,スパッタ法によりNi-Mn-Gaスパッタ膜をアルミナ基板上に作製し,種々の熱処理を施して,組成,組織,構造に及ぼす作製条件の効果について調査し,得られた合金膜の機械的特性(硬さ,弾性定数)に及ぼす影響についてナノインデンテーション法により評価することを目的とした.