Details of the Researcher

PHOTO

Satoshi Semboshi
Section
Institute for Materials Research
Job title
Professor
Degree
  • 博士(工学)(東北大学)

  • 修士(工学)(東北大学)

Research History 8

  • 2024/04 - Present
    Tohoku University Institute for Materials Research Professor (Cross appointment)

  • 2023/10 - Present
    Shimane University Faculty of Materials for Energy Professor

  • 2017/04 - 2023/09
    Tohoku University Institute for Materials Research

  • 2013/03 - 2017/03
    Tohoku University Institute for Materials Research Associate Professor

  • 2009/12 - 2013/02
    Institute for Materials Research, Tohoku University Lecturer

  • 2003/04 - 2009/11
    公立大学法人 大阪府立大学 助教

  • 2001/10 - 2003/03
    日本学術振興会 特別研究員(PD) 特別研究員

  • 1999/04 - 2001/09
    日本学術振興会 特別研究員(DC1) 特別研究員

Show all Show first 5

Education 3

  • Tohoku University Graduate School, Division of Engineering 材料加工プロセス工学専攻

    - 2001/09

  • Tohoku University Graduate School, Division of Engineering 材料加工プロセス工学専攻

    - 1997/03

  • Tohoku University Faculty of Engineering 材料加工学科

    - 1995/03/24

Committee Memberships 10

  • 日本金属学会・日本鉄鋼協会 中国・四国支部 専任幹事

    2025/04 - Present

  • 日本銅学会 理事

    2024/10 - Present

  • 日本銅学会 研究委員会

    2022/04 - Present

  • 日本金属学会 会誌編集委員・欧文誌編集委員

    2020/04 - Present

  • 日本銅学会 企画運営委員

    2018/04 - Present

  • 日本金属学会 編集委員

    2020/04 - Present

  • 日本銅学会 2022年度講演大会実行委員長

    2023/04 - 2023/10

  • 日本塑性加工学会 2022年度講演大会実行委員

    2022/04 - 2022/11

  • 日本金属学会 会報編集委員

    2015/04 - 2017/03

  • 日本金属学会 会報編集委員

    2011/04 - 2013/03

Show all ︎Show first 5

Professional Memberships 4

  • 日本塑性加工学会

    2021/01 - Present

  • 日本伸銅協会

    2008 - Present

  • 日本金属学会

    1995 - Present

  • 日本鉄鋼協会

    2013 - 2020

Research Interests 6

  • phase diagram

  • 水素

  • Hydrogen

  • Microstructure

  • Metallurgy

  • Thermo-mechanical processing

Research Areas 1

  • Nanotechnology/Materials / Material fabrication and microstructure control /

Awards 24

  1. 第58回 論文賞

    2024/03 日本銅学会 Cu-Ti合金における疲労亀裂の発生・進展に及ぼすAl・Fe添加の影響

  2. 第57回 論文賞

    2023/11 日本銅学会 強度・曲げ加工性・疲労特性に優れたCu-Ti-Al-Fe系合金の開発

  3. 第56回 論文賞

    2022/10 日本銅学会 VCM板ばね向け超高強度Cu-Ni-Al 系合金の強度発現メカニズム

  4. 第55回 論文賞

    2021/10 日本銅学会 エッチング加工性に優れた Cu-Ni-Co-Si 系高強度銅合金の開発

  5. 本間記念賞

    2021/05 東北大学 研友会

  6. 第54回 論文賞

    2020/10 財団法人 日本銅学会 超小型コネクタ用Cu-Ni-Co-Si系銅合金の高強度化における低温焼鈍硬化

  7. 第53回 論文賞

    2019/10 財団法人 日本銅学会 Cu-Ti合金線材の組織、強度および導電性に及ぼす合金組成の影響

  8. 第52回 論文賞

    2018/11 日本銅学会 高強度-高導電性Cu-Ti合金線材の作製

  9. 第51回 論文賞

    2017/11 財団法人 日本銅学会 薄型多ピンリードフレーム用Cu-Ni-Si系合金の開発

  10. 第50回 論文賞

    2016/10 日本銅学会 時効硬化型チタン銅合金における等温変態図

  11. 第49回論文賞

    2015/11 日本銅学会 極微量Bを添加した時効硬化型Cu-Ti合金における不連続析出物の生成挙動

  12. 第47回論文賞

    2013/11 日本銅学会 抽出分離法を利用したCu-Ti合金中時効析出物の定量的評価

  13. 第45回論文賞

    2011/11 日本伸銅協会 水素中で時効したCu-4.2 at.% Ti 合金の強度、導電性に及ぼす予ひずみの効果

  14. 第42回論文賞

    2008/11 日本伸銅協会 水素雰囲気中で時効処理したCu-3at.%Ti合金の組織、強度と導電率

  15. 第13回日本金属学会奨励賞(工業材料部門)

    2003/10/11 日本金属学会

  16. 第二回及川研究奨励賞

    1999/12/01 財団法人 青葉工業振興会

  17. 論文賞(学術賞)

    2022/02 日本ソノケミストリー学会 Synthesis of Au nanorods via autocatalytic growth of Au seeds formed by 1 sonochemical reduction of Au(I): Relation between the formation rate and two characteristics of Au nanorods

  18. 優秀ポスター賞

    2021/03 日本金属学会 レーザー肉盛法による NbC 粒子分散型Ni3(Si,Ti)合金肉盛層の作製と特性評価

  19. 第52回 論文賞

    2018/11 日本銅学会 熱加工プロセス条件の最適化によるCu-Ni-Co-Si系銅合金の高導電率化

  20. 優秀ポスター賞

    2018/03 日本金属学会 炭化物粒子複合型Ni基超々合金肉盛層に及ぼす炭化物種およびレーザ加工プロセスの影響

  21. 第51回 論文賞

    2017/11 財団法人 日本銅学会 時効析出型チタン銅合金における不連続析出物生成と結晶粒界性格との関係

  22. 「合金状態図172委員会」 研究報告会 ポスター賞

    2017/10 (独)日本学術振興会

  23. (独)大阪府立大学学長顕彰

    2009/05 (独)大阪府立大学

  24. 日本金属学会関西支部 研究発表優秀賞

    2004/01 日本鉄鋼協会 水素処理プロセスを利用した固体電解コンデンサー用粉末の作製と開発

Show all ︎Show 5

Papers 174

  1. Softening by intense cold rolling and hardening by low-temperature annealing for Cu-Ni-Al alloys

    Satoshi Semboshi, Shigeo Sato, Goro Miyamoto, Kazuhiro Ito, Shuhei Kasatani, Hiroshi Hyodo

    Materials Science and Engineering: A 2025/09

    DOI: 10.1016/j.msea.2025.148638  

  2. Discontinuous Precipitating Behavior for Cu-Ni-Si Alloy with Mn Addition

    Seung Zeon Han, Eun Ae Choi, Sung Hwan Lim, Satoshi Semboshi

    Materials Transactions 66 (1) 23-28 2025/01

    DOI: 10.2320/matertrans.MT-D2024006  

    ISSN: 1345-9678

  3. Microstructure and Mechanical Properties of Low Stacking-Fault Energy Cu-Based Alloy Wires

    Satoshi Semboshi, Ryusei Arauchi, Yasuyuki Kaneno, Sung Hwan Lim, Eun Ae Choi, Seung Zeon Han

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 55 (11) 4482-4493 2024/11

    DOI: 10.1007/s11661-024-07566-7  

    ISSN: 1073-5623

  4. Effect of Benzotriazole on Oxidation Behavior in Pure Copper

    Seung Zeon Han, Eun-Ae Choi, Gyujin Jeong, Jee Hyuk Ahn, Satoshi Semboshi

    MATERIALS TRANSACTIONS 65 (3) 318-322 2024/03/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/matertrans.mt-d2023011  

    ISSN: 1345-9678

    eISSN: 1347-5320

  5. Fabrication of Dual-Phase Strengthened Cu–Ti Alloy Sheets

    Satoshi Semboshi, Yuto Takito, Yasuyuki Kaneno, Shigeo Sato, Hiroshi Hyodo

    MATERIALS TRANSACTIONS 65 (3) 262-267 2024/03/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/matertrans.mt-d2023009  

    ISSN: 1345-9678

    eISSN: 1347-5320

  6. Mechanical Strength and Electrical Conductivity of Cu–In Solid Solution Alloy Wires

    Yasunori Abe, Satoshi Semboshi, Naoya Masahashi, Sung Hwan Lim, Eun-Ae Choi, Seung Zeon Han

    Metallurgical and Materials Transactions A 54 (3) 928-938 2023/03

    Publisher: Springer Science and Business Media {LLC}

    DOI: 10.1007/s11661-022-06938-1  

    ISSN: 1073-5623 1543-1940

  7. Phase diagram of the Cu–Ni3Al pseudo-binary system Peer-reviewed

    Satoshi Semboshi, Toshiki Anno, Yasuyuki Kaneno

    Journal of Alloys and Compounds 921 166124-166124 2022/11

    Publisher: Elsevier {BV}

    DOI: 10.1016/j.jallcom.2022.166124  

    ISSN: 0925-8388

  8. Effect of magnesium doping on discontinuous precipitation in age-hardenable copper–titanium alloys

    Kaichi Saito, Makio Suzuki, Yuichiro Hayasaka, Kana Takenaka, Satoshi Semboshi

    Materials Characterization 189 111911-111911 2022/07

    Publisher: Elsevier {BV}

    DOI: 10.1016/j.matchar.2022.111911  

    ISSN: 1044-5803

  9. A new type of half-metallic fully compensated ferrimagnet

    S. Semboshi, R. Y. Umetsu, Y. Kawahito, Hisazumi Akai

    Scientific Reports 12 (1) 2022/06/23

    Publisher: Springer Science and Business Media {LLC}

    DOI: 10.1038/s41598-022-14561-8  

    ISSN: 2045-2322

    eISSN: 2045-2322

  10. Fabrication of the Casting Products in Cu–Zn–Mn–Ni Medium-Entropy Brasses Peer-reviewed

    Takeshi Nagase, Akihiro Shibata, Mitsuaki Matsumuro, Mamoru Takemura, Satoshi Semboshi

    MATERIALS TRANSACTIONS 62 (6) 856-863 2021/06/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/matertrans.mt-m2020259  

    ISSN: 1345-9678

    eISSN: 1347-5320

  11. Age-Induced Precipitating and Strengthening Behaviors in a Cu–Ni–Al Alloy Peer-reviewed

    Semboshi, S., Hariki, R., Shuto, T., Hyodo, H., Kaneno, Y., Masahashi, N.

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52 (11) 4934-4945 2021

    Publisher: Springer Science and Business Media LLC

    DOI: 10.1007/s11661-021-06435-x  

    ISSN: 1073-5623

    eISSN: 1543-1940

  12. Additional Pinning Effect by Heavy-Ion Irradiation in Coated Conductors with Artificial Pinning Centers

    Tetsuro Sueyoshi, Toshinori Ozaki, Satoshi Semboshi, Hitoshi Sakane, Terukazu Nishizaki, Norito Ishikawa

    IEEE Transactions on Applied Superconductivity 35 (5) 2025

    DOI: 10.1109/TASC.2025.3527941  

    ISSN: 1051-8223

    eISSN: 1558-2515

  13. Effects of energetic electron irradiation on electric, magnetic, and mechanical properties of Cu-1.2 at.%Fe alloy

    A. Iwase, Y. Fujimura, S. Semboshi, F. Hori, T. Matsui

    Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 556 165506-165506 2024/11

    Publisher: Elsevier BV

    DOI: 10.1016/j.nimb.2024.165506  

    ISSN: 0168-583X

  14. First-principles study on twin generation induced by symmetry breaking in Cu-In alloy Peer-reviewed

    E.-A. Choi, S.Z. Han, S. Semboshi, S.H. Lim

    63 2024/08

  15. Cu-Ti合金における疲労亀裂の発生・進展に及ぼすAl・Fe添加の影響 Peer-reviewed

    橋本拓也, 鎌田俊哉, 兵藤宏, 渡辺宏治, 千星聡, 山﨑倫昭, 宮本吾郎

    銅と銅合金 63 2024/08

    DOI: 10.34562/jic.63.1_34  

  16. Cu-Ni-Al合金における加工軟化および低温焼鈍硬化 Peer-reviewed

    千星聡, 佐藤成男, 笠谷周平, 兵藤宏

    銅と銅合金 63 42-47 2024/08

    DOI: 10.34562/jic.63.1_42  

  17. Tuning critical current density properties of YBa2Cu3O y thin films under longitudinal magnetic field by using heavy-ion irradiation

    Tetsuro Sueyoshi, Ryusei Enokihata, Hiroshi Yamaguchi, Satoshi Semboshi, Toshinori Ozaki, Hitoshi Sakane, Terukazu Nishizaki, Norito Ishikawa

    Superconductor Science and Technology 37 (7) 075010-075010 2024/06/10

    Publisher: IOP Publishing

    DOI: 10.1088/1361-6668/ad51ae  

    ISSN: 0953-2048

    eISSN: 1361-6668

  18. Structure of nanoparticles in amorphous SiO2 by sequential implantation with Co and Ag ions

    S. Matsuo, A. Iwase, T. Matsui, R. Yagura, T. Yamada, N. Taguchi, S. Tanaka, S. Semboshi, F. Hori

    Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 549 165278-165278 2024/04

    Publisher: Elsevier BV

    DOI: 10.1016/j.nimb.2024.165278  

    ISSN: 0168-583X

  19. 高エネルギー電子線照射による銅-チタン合金の硬度と導電率の改質

    Akihiro Iwase, Yuki Fujimura, Satoshi Semboshi, Yuichi Saitoh, Fuminobu Hori

    Journal of the Japan Institute of Metals and Materials 88 (3) 48-52 2024/03/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/jinstmet.j2023024  

    ISSN: 0021-4876

    eISSN: 1880-6880 2433-7501

  20. Isothermal Aging Behaviors in Hydrogen Atmosphere of Magnesium-Doped Copper–Titanium Alloys

    Kodai Hirota, Kaichi Saito, Satoshi Semboshi

    MATERIALS TRANSACTIONS 65 (2) 119-124 2024/02/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/matertrans.mt-d2023010  

    ISSN: 1345-9678

    eISSN: 1347-5320

  21. Strengthening Effect of Decreased Dislocation Density After Annealing in Pure Aluminum or Copper

    Eun-Ae Choi, Yun Soo Lee, Sang Jin Lee, Jee Hyuk Ahn, Sung Hwan Lim, Satoshi Semboshi, Seung Zeon Han

    Metals and Materials International 2023/10/26

    Publisher: Springer Science and Business Media LLC

    DOI: 10.1007/s12540-023-01525-4  

    ISSN: 1598-9623

    eISSN: 2005-4149

  22. Modification of Hardness and Electrical Conductivity of Copper–Titanium Alloy by Energetic Electron Irradiation

    Akihiro Iwase, Yuki Fujimura, Satoshi Semboshi, Yuichi Saitoh, Fuminobu Hori

    MATERIALS TRANSACTIONS 64 (9) 2232-2236 2023/09/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/matertrans.mt-m2023061  

    ISSN: 1345-9678

    eISSN: 1347-5320

  23. DFT Simulation of Twinnability in Cu-In Alloy Peer-reviewed

    CHOI Eun-Ae, HAN Seung Zeon, AHN Jee Hyuk, SEMBOSHI Satoshi, LIM Sung Hwan

    銅と銅合金 62 263-267 2023/08

    ISSN: 1347-7234

  24. Effect of Benzotriazole on Oxidation Behavior in Pure Copper Peer-reviewed

    HAN Seung Zeon, CHOI Eun-Ae, JEONG Gyujin, AHN Jee Hyuk, 千星聡

    銅と銅合金 62 242-246 2023/08

    ISSN: 1347-7234

  25. Isothermal Aging Behaviors in Hydrogen Atmosphere of Magnesium-doped Copper-Titanium Alloys Peer-reviewed

    廣田航大, 齋藤嘉一, 千星聡

    銅と銅合金 62 6-11 2023/08

    ISSN: 1347-7234

  26. Surface Characterization and NO + CO Reaction Activity of Rolled Cu Foil Peer-reviewed

    黒須望実, 千星聡, 亀岡聡

    銅と銅合金 62 237-241 2023/08

    ISSN: 1347-7234

  27. Fabrication of Dual-Phase Strengthened Cu-Ti Alloy Sheets Peer-reviewed

    千星聡, 瀧藤優斗, 金野泰幸, 佐藤成男, 兵藤宏

    銅と銅合金 62 68-72 2023/08

    ISSN: 1347-7234

  28. Development of Cu-Ti-Al-Fe Alloys with Excellent Strength, Bending Formability and Fatigue Properties Peer-reviewed

    橋本拓也, 依藤洋, 兵藤宏, 渡辺宏治, 千星聡

    銅と銅合金 62 35-41 2023/08

    ISSN: 1347-7234

  29. Alloy Design and Solidification Microstructure Analysis of Equiatomic CuSnZn and CuSnAl Alloys Peer-reviewed

    永瀬丈嗣, 柴田顕弘, 松室光昭, 武村守, 千星聡

    銅と銅合金 62 (1) 60-67 2023/08

    DOI: 10.34562/jic.62.1_60  

    ISSN: 1347-7234

  30. Influence of Defect Morphology on Absolute J c Value in Heavy-Ion Irradiated REBCO Films

    Tetsuro Sueyoshi, Toshinori Ozaki, Satoshi Semboshi, Hitoshi Sakane, Terukazu Nishizaki, Norito Ishikawa

    IEEE Transactions on Applied Superconductivity 33 (5) 1-5 2023/08

    Publisher: Institute of Electrical and Electronics Engineers (IEEE)

    DOI: 10.1109/tasc.2023.3238288  

    ISSN: 1051-8223

    eISSN: 1558-2515 2378-7074

  31. Properties of ScAlMgO4 as Substrate for Nitride Semiconductors

    Takashi Matsuoka, Hitoshi Morioka, Satoshi Semboshi, Yukihiko Okada, Kazuya Yamamura, Shigeyuki Kuboya, Hiroshi Okamoto, Tsuguo Fukuda

    Crystals 13 (3) 449-449 2023/03/04

    Publisher: MDPI AG

    DOI: 10.3390/cryst13030449  

    ISSN: 2073-4352

    eISSN: 2073-4352

  32. Structure and magnetic properties of Fe nanoparticles in amorphous silica implanted with Fe ions and effect of subsequent energetic heavy ion irradiation Peer-reviewed

    A. Iwase, K. Fukuda, Y. Saitoh, Y. Okamoto, S. Semboshi, H. Amekura, T. Matsui

    Journal of Applied Physics 132 (16) 2022/10/28

    DOI: 10.1063/5.0102438  

    ISSN: 0021-8979

    eISSN: 1089-7550

  33. Fabrication of High-Strength and High-Electrical Conductive Cu-In Solid Solution Alloy Wires

    阿部泰寛, 千星聡, 正橋直哉

    銅と銅合金 61 2022

    DOI: 10.34562/jic.61.1_317  

    ISSN: 1347-7234 2435-872X

  34. Experimental Determination of Phase Diagram for Cu-Ni3Al Pseudo-Binary System

    安野利希, 金野泰幸, 千星聡, 正橋直哉

    銅と銅合金 61 2022

    DOI: 10.34562/jic.61.1_86  

    ISSN: 1347-7234 2435-872X

  35. Strengthening Mechanism of Cu-Ni-Al Alloys for VCM Leaf Spring

    笠谷周平, 首藤俊也, 兵藤宏, 渡辺宏治, 成枝宏人, 千星聡, 宮本吾郎

    銅と銅合金 61 2022

    DOI: 10.34562/jic.61.1_34  

    ISSN: 1347-7234 2435-872X

  36. Discontinuous Precipitation Behavior of Magnesium-Doped Copper-Titanium Alloys

    齋藤嘉一, 鈴木牧生, 早坂祐一郎, 竹中佳生, 千星聡

    銅と銅合金 61 2022

    DOI: 10.34562/jic.61.1_81  

    ISSN: 1347-7234 2435-872X

  37. Morphology of columnar defects dependent on irradiation direction in high-Tc superconductors Peer-reviewed

    Sueyoshi, T., Semboshi, S., Ozaki, T., Sakane, H., Nishizaki, T., Ishikawa, N.

    IEEE Transactions on Applied Superconductivity 32 (6) 1-4 2022

    Publisher: Institute of Electrical and Electronics Engineers (IEEE)

    DOI: 10.1109/TASC.2022.3153436  

    ISSN: 1558-2515 1051-8223

    eISSN: 1558-2515 2378-7074

  38. エッチング加工性に優れたCu–Ni–Co–Si系高強度銅合金の開発 Peer-reviewed

    婉青 姜, 宏 兵藤, 宏治 渡辺, 宏人 成枝, 聡 千星

    銅と銅合金 60 256-261 2021/08

    DOI: 10.34562/jic.60.1_256  

    ISSN: 1347-7234 2435-872X

  39. Photoactivity of an anodized biocompatible TiNbSn alloy prepared in sodium tartrate/hydrogen peroxide aqueous solution Peer-reviewed

    N. Masahashi, Y. Mori, H. Kurishima, H. Inoue, T. Mokudai, S. Semboshi, M. Hatakeyama, E. Itoi, S. Hanada

    Applied Surface Science 543 2021/03/30

    DOI: 10.1016/j.apsusc.2020.148829  

    ISSN: 0169-4332

  40. Low Young's modulus of cold groove-rolled β Ti–Nb–Sn alloys for orthopedic applications Peer-reviewed

    S. Hanada, N. Masahashi, S. Semboshi, T. K. Jung

    Materials Science and Engineering A 802 2021/01/20

    DOI: 10.1016/j.msea.2020.140645  

    ISSN: 0921-5093

  41. Microstructure, morphology and magnetic property of (001)-textured MnAlGe Films on Si/SiO<inf>2</inf> substrate Peer-reviewed

    Umetsu, R.Y., Semboshi, S., Mitsui, Y., Katsui, H., Nozaki, Y., Yuitoo, I., Takeuchi, T., Saito, M., Kawarada, H.

    Materials Transactions 62 (5) 680-687 2021

    DOI: 10.2320/matertrans.MT-M2020309  

    ISSN: 1345-9678

  42. Synthesis of Au nanorods via autocatalytic growth of Au seeds formed by sonochemical reduction of Au(I): Relation between formation rate and characteristic of Au nanorods Peer-reviewed

    Kenji Okitsu, Satoshi Semboshi

    Ultrasonics Sonochemistry 69 2020/12

    DOI: 10.1016/j.ultsonch.2020.105229  

    ISSN: 1350-4177

    eISSN: 1873-2828

  43. Control of optical absorption of silica glass by Ag ion implantation and subsequent heavy ion irradiation Peer-reviewed

    Tomoko Yamada, Kengo Fukuda, Satoshi Semboshi, Yuichi Saitoh, Hiroshi Amekura, Akihiro Iwase, Fuminobu Hori

    NANOTECHNOLOGY 31 (45) 2020/11

    DOI: 10.1088/1361-6528/abaadf  

    ISSN: 0957-4484

    eISSN: 1361-6528

  44. Isothermal aging behaviors of coppertitaniummagnesium supersaturated solid-Solution alloys Peer-reviewed

    Kaichi Saito, Makio Suzuki, Satoshi Semboshi, Katsuhiko Sato, Yuichiro Hayasaka

    Materials Transactions 61 (10) 1912-1921 2020/10/01

    DOI: 10.2320/matertrans.MT-M2020149  

    ISSN: 1345-9678

  45. Cu-Zn-Mn-Niミディアムエントロピー黄銅鋳造材の作製 Peer-reviewed

    永瀬丈嗣, 柴田顕弘, 松室光昭, 武村守, 千星聡

    銅と銅合金 59 24-31 2020/08

  46. Cu-Ni3Al合金の時効にともなう組織および特性の変化 Peer-reviewed

    榛木隆太, 千星聡, 金野泰幸, 高杉隆幸, 首藤俊也, 兵藤宏

    銅と銅合金 59 48-53 2020/08

  47. Strengthening by Annealing at A Low Temperature on Cu–Ni–Co–Si Alloys for Micro Connectors Peer-reviewed

    Yorifuji Hiroshi, Hyodo Hiroshi, Suzuki Motohiko, Watanabe Koji, Narieda Hiroto, Semboshi Satoshi, Miyamoto Goro

    Journal of Japan Institute of Copper 59 (1) 249-254 2020/08

    Publisher: Japan Institute of Copper

    DOI: 10.34562/jic.59.1_249  

    ISSN: 1347-7234

    More details Close

    <p>From the background of miniaturization and high–density mounting in mobile information communication devices such as smartphones and tablet terminals, micro connectors are getting thinner and narrower. It is therefore, required to improve the strength and electrical conductivity of copper alloys used in the devices. Recently, our group successfully found that the procedure of finish–rolling and then annealing at a low temperature was available to provide a 0.2% proof stress exceeding 1000 MPa and an electrical conductivity exceeding 30% IACS for a Cu–2.4Ni–1.2Co–0.90Si alloy (mass%). In this study, we investigated the strength, electrical conductivity, and microstructural evolution of before and after annealing at a low temperature for the Cu–2.4Ni–1.2Co–0.9Si alloy, by means of XRD, EBSD, FE–SEM, TEM, and three–dimensional atom probe (3DAP). According to the 3DAP analysis, clusters of Ni, Co, and Si with a size of approximately 1 nm were formed after annealing at a low temperature. It is suggested that fine age–induced precipitates, (Ni,Co)2Si, with a size of 5 nm, should be sheared by the finish–rolling procedure and then ultrafine clusters should be formed by annealing at a low temperature. Therefore, the strengthening by annealing at a low temperature must be contributed to ultrafine clusters.</p>

  48. 溶体化および時効処理したCu-In合金の組織と特性 Peer-reviewed

    門井祐輔, 千星聡, 正橋直哉

    銅と銅合金 59 54-58 2020/08

  49. Unidirectional Crystal Orientation of Dual-Phase Ni3Al-Based Alloy via Laser Irradiation Peer-reviewed

    Satoshi Semboshi, Hiroshi Nakamura, Yosuke Kawahito, Yasuyuki Kaneno, Takayuki Takasugi

    METALS 10 (8) 1011-1011 2020/08

    DOI: 10.3390/met10081011  

    eISSN: 2075-4701

  50. Suppression of Discontinuous Precipitation in Cu-Ti Alloys by Aging in a Hydrogen Atmosphere Peer-reviewed

    Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi, Naoya Masahashi

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 51 (7) 3704-3712 2020/07

    DOI: 10.1007/s11661-020-05801-5  

    ISSN: 1073-5623

    eISSN: 1543-1940

  51. Effects of Iron Addition on the Microstructures and Mechanical Properties of Two-Phase Ni<inf>3</inf>Al-Ni<inf>3</inf>V Intermetallic Alloys Peer-reviewed

    Hikaru Kato, Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 51 (5) 2469-2479 2020/05/01

    DOI: 10.1007/s11661-020-05680-w  

    ISSN: 1073-5623

  52. Strong flux pinning by columnar defects with directionally dependent morphologies in GdBCO-coated conductors irradiated with 80 MeV Xe ions Peer-reviewed

    Tetsuro Sueyoshi, Tetsuya Kotaki, Yuichi Furuki, Takanori Fujiyoshi, Satoshi Semboshi, Toshinori Ozaki, Hitoshi Sakane, Masaki Kudo, Kazuhiro Yasuda, Norito Ishikawa

    JAPANESE JOURNAL OF APPLIED PHYSICS 59 (2) 2020/02

    DOI: 10.35848/1347-4065/ab6f2b  

    ISSN: 0021-4922

    eISSN: 1347-4065

  53. Alloy design and fabrication of ingots in Cu-Zn-Mn-Ni-Sn high-entropy and Cu-Zn-Mn-Ni medium-entropy brasses Peer-reviewed

    Takeshi Nagase, Akihiro Shibata, Mitsuaki Matsumuro, Mamoru Takemura, Satoshi Semboshi

    Materials and Design 181 2019/11/05

    DOI: 10.1016/j.matdes.2019.107900  

    ISSN: 0264-1275

    eISSN: 1873-4197

  54. Effect of Heat Treatment on Microstructure and Mechanical Properties of Dual Two-Phase Ni3Al and Ni3V Intermetallic Alloys

    Kazushige Ioroi, Yasuyuki Kaneno, Takayuki TakasugiI, Satoshi Semboshi

    2019 Joint EPRI – 123HiMAT International Conference on Advances in High-Temperature Materials 2019/10/21

    Publisher: ASM International

    DOI: 10.31399/asm.cp.am-epri-2019p0904  

    ISSN: 2994-4023

    eISSN: 2994-4031

    More details Close

    Abstract So-called Ni base dual two-phase intermetallic alloys are composed of primary Ni3Al (L12) phase precipitates among eutectoid microstructures consisting of the Ni3Al and Ni3V (D022) phases. In this article, microstructural refinement of an alloy with a nominal composition of Ni75Al10V15 (in at.%) was attempted by various heat treatment processes. When the alloy was continuously cooled down after solution treatment, fine and cuboidal Ni3Al precipitates were developed by rapid cooling while coarse, rounded and coalesced Ni3Al precipitates were developed by slow cooling. When the alloy was isothermally annealed at temperatures above the eutectoid temperature, the morphology of the Ni3Al precipitates changed from fine and cuboidal one to large and rounded one with increase in annealing time. When the alloy was annealed at temperatures below the eutectoid temperature, the Ni3Al precipitates were grown keeping cuboidal morphology. The morphological change from the cuboidal to rounded Ni3Al precipitates was induced by the transition from the growth driven by elastic interaction energy between the precipitate and matrix to that by the surface energy of the precipitate. Fine and cuboidal Ni3Al precipitates generally resulted in high hardness.

  55. Microstructures and tensile properties of off-stoichiometric Ni<inf>3</inf>Al-Ni<inf>3</inf>V pseudo-binary alloys Peer-reviewed

    Kazushige Ioroi, Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi

    Journal of Materials Research 34 (18) 3061-3070 2019/09/30

    DOI: 10.1557/jmr.2019.269  

    ISSN: 0884-2914

    eISSN: 2044-5326

  56. Accelerating heterogeneous nucleation to increase hardness and electrical conductivity by deformation prior to ageing for Cu-4 at.% Ti alloy Peer-reviewed

    Seung Zeon Han, Satoshi Semboshi, Jee Hyuk Ahn, Eun Ae Choi, Minah Cho, Yusuke Kadoi, Kwangho Kim, Jehyun Lee

    Philosophical Magazine Letters 99 (8) 275-283 2019/08/03

    DOI: 10.1080/09500839.2019.1670879  

    ISSN: 0950-0839

    eISSN: 1362-3036

  57. Effect of heterogeneous nucleation on aging behavior in Cu-3.5 wt.% Ti alloy Peer-reviewed

    S.Z. Han, E.-A. Choi, J.H. Ahn, S. Semboshi, M. Jo, Y. Kadoi, K. Kim, J. Lee

    58 13-17 2019/08

  58. Effect of Composition on the Strength and Electrical Conductivity of Cu-Ti Binary Alloy Wires Fabricated by Aging and Intense Drawing Peer-reviewed

    Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi, Sueng Zeon Han, Naoya Masahashi

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 50A (3) 1389-1396 2019/03

    DOI: 10.1007/s11661-018-5088-z  

    ISSN: 1073-5623

    eISSN: 1543-1940

  59. Effect of transition metal addition on microstructure and hardening behavior of two-phase Ni<inf>3</inf>Al-Ni<inf>3</inf>V intermetallic alloys Peer-reviewed

    Kazushige Ioroi, Yasuyuki Kaneno, Satoshi Semboshi, Takayuki Takasugi

    Materialia 5 100173 2019/03

    DOI: 10.1016/j.mtla.2018.11.022  

    eISSN: 2589-1529

  60. Age-Induced Precipitation and Hardening Behavior of Ni3Al Intermetallic Alloys Containing Vanadium Peer-reviewed

    Satoshi Semboshi, Ryosuke Sasaki, Yasuyuki Kaneno, Takayuki Takasugi

    METALS 9 (2) 160 2019/02

    DOI: 10.3390/met9020160  

    eISSN: 2075-4701

  61. Cu-Ti合金線材の組織,強度および導電性に及ぼす合金組成の影響 Peer-reviewed

    千星 聡, 正橋直哉, 金野泰幸, 高杉隆幸, S.Z. Han

    銅と銅合金 58 86-91 2019

  62. Effect of prior cold working before aging on the precipitation behavior in a Cu-3.5 wt% Ti alloy Peer-reviewed

    Minah Jo, Eun Ae Choi, Jee Hyuk Ahn, Young Guk Son, Kwangho Kim, Jehyun Lee, Satoshi Semboshi, Seung Zeon Han

    Journal of Korean Institute of Metals and Materials 57 (1) 10-17 2019

    DOI: 10.3365/KJMM.2019.57.1.10  

    ISSN: 1738-8228

  63. High Strength and High Electrical Conductivity Cu-Ti Alloy Wires Fabricated by Aging and Severe Drawing Peer-reviewed

    Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi, Naoya Masahashi

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 49A (10) 4956-4965 2018/10

    DOI: 10.1007/s11661-018-4816-8  

    ISSN: 1073-5623

    eISSN: 1543-1940

  64. Effect of elastic collisions and electronic excitation on lattice structure of NiTi bulk intermetallic compound irradiated with energetic ions Peer-reviewed

    M. Ochi, H. Kojima, F. Hori, Y. Kaneno, S. Semboshi, Y. Saitoh, Y. Okamoto, N. Ishikawa, A. Iwase

    Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 427 14-19 2018/07/15

    Publisher: Elsevier B.V.

    DOI: 10.1016/j.nimb.2018.04.035  

    ISSN: 0168-583X

  65. Microstructural Subsequence and Phase Equilibria in an Age-Hardenable Cu-Ni-Si Alloy Peer-reviewed

    Satoshi Semboshi, Mikio Ishikuro, Akihiro Iwase, Takayuki Takasugi

    MATERIALS TRANSACTIONS 59 (2) 182-187 2018

    DOI: 10.2320/matertrans.MC201706  

    ISSN: 1345-9678

    eISSN: 1347-5320

  66. Effects of Tungsten Addition and Isothermal Annealing on Microstructural Evolution and Hardening Behavior of Two-Phase Ni3Al-Ni3V Intermetallic Alloys Peer-reviewed

    Akinori Uekami, Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi

    MATERIALS TRANSACTIONS 59 (2) 204-213 2018

    DOI: 10.2320/matertrans.MC201702  

    ISSN: 1345-9678

    eISSN: 1347-5320

  67. Thermal conductivity of Ni-3(Si,Ti) single-phase alloys Peer-reviewed

    Satoshi Semboshi, Tatsuro Takeuchi, Yasuyuki Kaneno, Akihiro Iwase, Takayuki Takasugi

    INTERMETALLICS 92 119-125 2018/01

    DOI: 10.1016/j.intermet.2017.10.002  

    ISSN: 0966-9795

    eISSN: 1879-0216

  68. Microstructure and Properties of Laser Clad Ni-Base Intermetallic Alloys Reinforced with Carbide Particles Peer-reviewed

    Miki Tanaka, Takuto Yamaguchi, Hideki Hagino, Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi

    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS 82 (12) 451-460 2018

    DOI: 10.2320/jinstmet.J2018028  

    ISSN: 0021-4876

    eISSN: 1880-6880

  69. Microstructures and hardness properties of laser clad Ni base two-phase intermetallic alloy coating Peer-reviewed

    Takeshi Okuno, Yasuyuki Kaneno, Takuto Yamaguchi, Satoshi Semboshi, Hideki Hagino, Takayuki Takasugi

    JOURNAL OF MATERIALS RESEARCH 32 (24) 4531-4540 2017/12

    DOI: 10.1557/jmr.2017.352  

    ISSN: 0884-2914

    eISSN: 2044-5326

  70. Relationship between Grain Boundary Structure and Nucleation of Discontinuous Precipitates for Age-Hardenable Cu-Ti Alloys

    千星聡, 佐藤充孝, 岩瀬彰宏, 高杉隆幸, 須田久

    銅と銅合金 56 10-14 2017/08

    ISSN: 1347-7234

  71. Grain Boundary Character Dependence on Nucleation of Discontinuous Precipitates in Cu-Ti Alloys Peer-reviewed

    Satoshi Semboshi, Mitsutaka Sato, Yasuyuki Kaneno, Akihiro Iwase, Takayuki Takasugi

    MATERIALS 10 (4) 415 2017/04

    DOI: 10.3390/ma10040415  

    ISSN: 1996-1944

  72. Kinetics and Equilibrium of Age-Induced Precipitation in Cu-4 At. Pct Ti Binary Alloy Peer-reviewed

    Satoshi Semboshi, Shintaro Amano, Jie Fu, Akihiro Iwase, Takayuki Takasugi

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 48A (3) 1501-1511 2017/03

    DOI: 10.1007/s11661-016-3949-x  

    ISSN: 1073-5623

    eISSN: 1543-1940

  73. Processing parameter, microstructure and hardness of Ni base intermetallic alloy coating fabricated by laser cladding Peer-reviewed

    Takeshi Okuno, Yasuyuki Kaneno, Takuto Yamaguchi, Takayuki Takasugi, Satoshi Semboshi, Hideki Hagino

    MRS Advances 2 (26) 1381-1386 2017

    Publisher: Materials Research Society

    DOI: 10.1557/adv.2017.120  

    ISSN: 2059-8521

    eISSN: 2059-8521

  74. Development of Cu-Ni-Si Alloys for Thin and Multi-pin Lead Frames Peer-reviewed

    56 (1) 28-34 2017

    Publisher:

    ISSN: 1347-7234

  75. Ion Species/Energy Dependence of Irradiation-Induced Lattice Structure Transformation and Surface Hardness of Ni3Nb and Ni3Ta Intermetallic Compounds Peer-reviewed

    H. Kojima, Y. Kaneno, M. Ochi, S. Semboshi, F. Hori, Y. Saitoh, N. Ishikawa, Y. Okamoto, A. Iwase

    MATERIALS TRANSACTIONS 58 (5) 739-748 2017

    DOI: 10.2320/matertrans.MBW201612  

    ISSN: 1345-9678

    eISSN: 1347-5320

  76. Thermal stability of energetic ion irradiation induced amorphization for Ni3Nb and Ni3Ta intermetallic compounds Peer-reviewed

    H. Kojima, M. Ochi, Y. Kaneno, S. Semboshi, F. Hori, Y. Saitoh, A. Iwase

    Transactions of the Materials Research Society of Japan 42 41-45 2017

    DOI: 10.14723/tmrsj.42.41  

  77. Radiation enhanced precipitation of solute atoms in AlCu binary alloys–energetic ion irradiation experiment and computer simulation- Peer-reviewed

    R. Mayumi, S. Semboshi, Y. Okamoto, Y. Saito, T. Yoshiie, A. Iwase

    Transactions of the Materials Research Society of Japan 142 9-14 2017

    DOI: 10.14723/tmrsj.42.9  

  78. Age-hardenable Cu-Ti alloys prepared by hydrogen process –Microstructural evolution of Cu-Ti alloys aged in a hydrogen atmosphere- Peer-reviewed

    S. Semboshi, A. Iwase, Y. Kaneno, T. Takasugi

    Proceedings of the Visual-JW2016, Osaka University 3 9-10 2016/10

  79. Structure of thermal-aging induced Fe clusters and their effects on physical properties for Cu-1.2 at.% Fe alloy Peer-reviewed

    Y. Fujimura, T. Matsui, S. Semboshi, Y. Okamoto, K. Nishida, Y. Yamamoto, A. Iwase

    JOURNAL OF ALLOYS AND COMPOUNDS 682 805-814 2016/10

    DOI: 10.1016/j.jallcom.2016.05.021  

    ISSN: 0925-8388

    eISSN: 1873-4669

  80. Discontinuous precipitates in age-hardening Cu-Ni-Si alloys Peer-reviewed

    Satoshi Semboshi, Shigeo Sato, Akihiro Iwase, Takayuki Takasugi

    MATERIALS CHARACTERIZATION 115 39-45 2016/05

    DOI: 10.1016/j.matchar.2016.03.017  

    ISSN: 1044-5803

    eISSN: 1873-4189

  81. Lattice structure transformation and change in surface hardness of Ni3Nb and Ni3Ta intermetallic compounds induced by energetic ion beam irradiation Peer-reviewed

    H. Kojima, H. Yoshizaki, Y. Kaneno, S. Semboshi, F. Hori, Y. Saitoh, Y. Okamoto, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 372 72-77 2016/04

    DOI: 10.1016/j.nimb.2016.02.002  

    ISSN: 0168-583X

    eISSN: 1872-9584

  82. Fine Precipitation in the Channel Region of Two-Phase Ni3Al and Ni3V Intermetallic Alloys Containing Mo and W Peer-reviewed

    Daisuke Edatsugi, Yasuyuki Kaneno, Satoshi Semboshi, Takayuki Takasugi

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 47A (3) 998-1008 2016/03

    DOI: 10.1007/s11661-015-3297-2  

    ISSN: 1073-5623

    eISSN: 1543-1940

  83. Magnetic states of cobalt atoms in copper metal after cobalt-implantation and effects of subsequent annealing Peer-reviewed

    Y. Fujimura, S. Semboshi, Y. Okamoto, Y. Saitoh, T. Matsui, A. Iwase

    Transactions of the Materials Research Society of Japan 41 209-202 2016

    DOI: 10.14723/tmrsj.41.209  

  84. Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys Peer-reviewed

    Taku Moronaga, Yasuyuki Kaneno, Satoshi Semboshi, Takayuki Takasugi

    PHILOSOPHICAL MAGAZINE 95 (34) 3859-3875 2015/12

    DOI: 10.1080/14786435.2015.1108526  

    ISSN: 1478-6435

    eISSN: 1478-6443

  85. Surface hardening of age-hardenable Cu-Ti alloy by plasma carburization Peer-reviewed

    S. Semboshi, Akihiro Iwase, T. Takasugi

    SURFACE & COATINGS TECHNOLOGY 283 262-267 2015/12

    DOI: 10.1016/j.surfcoat.2015.11.003  

    ISSN: 0257-8972

  86. Energetic ion beam induced crystal phase transformation and resulting hardness change in Ni3Al intermetallic compound Peer-reviewed

    H. Yoshizaki, A. Hashimoto, Y. Kaneno, S. Semboshi, F. Hori, Y. Saitoh, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 354 287-291 2015/07

    DOI: 10.1016/j.nimb.2014.11.067  

    ISSN: 0168-583X

    eISSN: 1872-9584

  87. Effect of Boron Doping on Cellular Discontinuous Precipitation for Age-Hardenable Cu-Ti Alloys Peer-reviewed

    Satoshi Semboshi, Jun Ikeda, Akihiro Iwase, Takayuki Takasugi, Shigeru Suzuki

    MATERIALS 8 (6) 3467-3478 2015/06

    DOI: 10.3390/ma8063467  

    ISSN: 1996-1944

  88. Hardness modification of Al-Mg-Si alloy by using energetic ion beam irradiation Peer-reviewed

    D. Ueyama, Y. Saitoh, N. Ishikawa, T. Ohmura, S. Semboshi, F. Hori, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 351 1-5 2015/05

    DOI: 10.1016/j.nimb.2015.03.055  

    ISSN: 0168-583X

    eISSN: 1872-9584

  89. Effect of Dislocations on Spinodal Decomposition, Precipitation, and Age-hardening of Cu-Ti Alloy Peer-reviewed

    Shigeo Sato, Akifumi Hasegawa, Satoshi Semboshi, Kazuaki Wagatsuma

    HIGH TEMPERATURE MATERIALS AND PROCESSES 34 (2) 123-130 2015/04

    DOI: 10.1515/htmp-2014-0038  

    ISSN: 0334-6455

    eISSN: 2191-0324

  90. Three-Dimensional Imaging of Dislocations in a Ti-35mass%Nb Alloy by Electron Tomography Peer-reviewed

    Kazuhisa Sato, Satoshi Semboshi, Toyohiko J. Konno

    MATERIALS 8 (4) 1924-1933 2015/04

    DOI: 10.3390/ma8041924  

    ISSN: 1996-1944

  91. Thermal conductivity of Ni3V-Ni3Al pseudo-binary alloys Peer-reviewed

    Satoshi Semboshi, Hiroyuki Tsuda, Yasuyuki Kaneno, Akihiro Iwase, Takayuki Takasugi

    INTERMETALLICS 59 1-7 2015/04

    DOI: 10.1016/j.intermet.2014.12.006  

    ISSN: 0966-9795

    eISSN: 1879-0216

  92. Electroforming of oxide-nanoparticle-reinforced copper-matrix composite Peer-reviewed

    Satoshi Semboshi, Yasuhiro Sakamoto, Hiroyuki Inoue, Akihiro Iwase, Naoya Masahashi

    JOURNAL OF MATERIALS RESEARCH 30 (4) 521-527 2015/02

    DOI: 10.1557/jmr.2014.401  

    ISSN: 0884-2914

    eISSN: 2044-5326

  93. Modification of surface hardness for dual two-phase Ni3Al-Ni3V intermetallic compound by using energetic ion beam and subsequent thermal treatment Peer-reviewed

    H. Yoshizaki, A. Hashimoto, Y. Kaneno, S. Semboshi, Y. Saitoh, Y. Okamoto, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 345 22-26 2015/02

    DOI: 10.1016/j.nimb.2014.12.059  

    ISSN: 0168-583X

    eISSN: 1872-9584

  94. 16aPS-123 Development of high tensile strength and high electrical conductivity Cu-Ti alloy wire for a 100T non-destructive high field pulsed magnet

    Narumi Yasuo, Semboshi Satoshi

    Meeting Abstracts of the Physical Society of Japan 70 797-797 2015

    Publisher: The Physical Society of Japan (JPS)

    DOI: 10.11316/jpsgaiyo.70.2.0_797  

    ISSN: 2189-079X

  95. Strengthening enhanced by alloying in dual two-phase Ni3Al and Ni3V intermetallic alloys Peer-reviewed

    T. Takasugi, Y. Kaneno, S. Semboshi

    the proceedings of 123HiMAT (Advanced High-temperature Materials Technology for Sustainable and Reliable Power Engineering) 2015

  96. Precipitation Behavior and Properties of Cu-Ti Alloys with Added Nitrogen Peer-reviewed

    Jun Ikeda, Satoshi Semboshi, Akihiro Iwase, Weilin Gao, Akira Sugawara

    MATERIALS TRANSACTIONS 56 (3) 297-302 2015

    DOI: 10.2320/matertrans.M2014216  

    ISSN: 1345-9678

    eISSN: 1347-5320

  97. Anomalous hardening and microstructural evolution accompanied by reordering and restoring of plastically deformed Co3Ti Peer-reviewed

    Takahiro Oka, Yasuyuki Kaneno, Satoshi Semboshi, Ryusuke Nakamura, Takayuki Takasugi

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 620 411-419 2015/01

    DOI: 10.1016/j.msea.2014.10.035  

    ISSN: 0921-5093

    eISSN: 1873-4936

  98. Modification of microstructure and hardness for Cu-Ti alloy by means of energetic ion beam irradiation Peer-reviewed

    D. Ueyama, S. Semboshi, Y. Saitoh, F. Hori, K. Nishida, N. Soneda, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 341 53-57 2014/12

    DOI: 10.1016/j.nimb.2014.06.033  

    ISSN: 0168-583X

    eISSN: 1872-9584

  99. Microstructure evolution and hardness change in ordered Ni3V intermetallic alloy by energetic ion irradiation Peer-reviewed

    A. Hashimoto, Y. Kaneno, S. Semboshi, H. Yoshizaki, Y. Saitoh, Y. Okamoto, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 338 72-76 2014/11

    DOI: 10.1016/j.nimb.2014.08.008  

    ISSN: 0168-583X

    eISSN: 1872-9584

  100. Surface hardening of age-hardenable Cu-Ti dilute alloys by plasma nitriding Peer-reviewed

    S. Semboshi, S. Kimura, A. Iwase, N. Ohtsu

    SURFACE & COATINGS TECHNOLOGY 258 691-698 2014/11

    DOI: 10.1016/j.surfcoat.2014.08.015  

    ISSN: 0257-8972

  101. Age-hardening behavior of a single-crystal Cu-ti alloy Peer-reviewed

    S. Semboshi, E. Hinamoto, A. Iwase

    MATERIALS LETTERS 131 90-93 2014/09

    DOI: 10.1016/j.matlet.2014.05.128  

    ISSN: 0167-577X

    eISSN: 1873-4979

  102. 抽出分離法を利用したCu-Ti合金中時効析出物の定量評価 Peer-reviewed

    佐藤 成男, 長谷川 啓史, 千星 聡, 我妻 和明

    銅と銅合金 53 (1) 166-170 2014/07

  103. Anomalous hardening behavior accompanied by reordering of plastically deformed Ni-3(Si,Ti) intermetallic alloy Peer-reviewed

    Akihiro Hashimoto, Yasuyuki Kaneno, Satoshi Semboshi, Takayuki Takasugi

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 610 228-236 2014/07

    DOI: 10.1016/j.msea.2014.05.036  

    ISSN: 0921-5093

    eISSN: 1873-4936

  104. Investigation of Precipitation Behavior in Age-Hardenable Cu-Ti Alloys by an Extraction-Based Approach Peer-reviewed

    Satoshi Semboshi, Shigeo Sato, Mikio Ishikuro, Kazuaki Wagatsuma, Akihiro Iwase, Takayuki Takasugi

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 45A (8) 3401-3411 2014/07

    DOI: 10.1007/s11661-014-2293-2  

    ISSN: 1073-5623

    eISSN: 1543-1940

  105. Hardening induced by energetic electron beam for Cu-Ti alloys Peer-reviewed

    Daichi Ueyama, Satoshi Semboshi, Yuichi Saitoh, Norito Ishikawa, Kenji Nishida, Naoki Soneda, Fuminobu Hori, Akihiro Iwase

    JAPANESE JOURNAL OF APPLIED PHYSICS 53 (5) 05FC04-1-05FC04-5 2014/05

    DOI: 10.7567/JJAP.53.05FC04  

    ISSN: 0021-4922

    eISSN: 1347-4065

  106. Effect of high temperature annealing on non-thermal equilibrium phases induced by energetic ion irradiation in FeRh and Ni3V intermetallic compounds Peer-reviewed

    Akihiro Hashimoto, Yasuyuki Kaneno, Satoshi Semboshi, Hiroaki Yoshizaki, Yuichi Saitoh, Akihiro Iwase

    JAPANESE JOURNAL OF APPLIED PHYSICS 53 (5) 05FC08-1-05FC08-4 2014/05

    DOI: 10.7567/JJAP.53.05FC08  

    ISSN: 0021-4922

    eISSN: 1347-4065

  107. Fabrication of high-strength and high-conductivity Cu-Ti alloy wire by aging in a hydrogen atmosphere Peer-reviewed

    Satoshi Semboshi, Takayuki Takasugi

    JOURNAL OF ALLOYS AND COMPOUNDS 580 S397-S400 2013/12

    DOI: 10.1016/j.jallcom.2013.03.216  

    ISSN: 0925-8388

    eISSN: 1873-4669

  108. Effects of energetic heavy ion irradiation on hardness of Al-Mg-Si alloys Peer-reviewed

    D. Ueyama, Y. Saitoh, F. Hori, Y. Kaneno, K. Nishida, K. Dohi, N. Soneda, S. Semboshi, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 314 107-111 2013/11

    DOI: 10.1016/j.nimb.2013.04.067  

    ISSN: 0168-583X

    eISSN: 1872-9584

  109. Solid-state bonding of alloy-designed Cu-Zn brass and steel associated with phase transformation by spark plasma sintering Peer-reviewed

    Naoya Masahashi, Satoshi Semboshi, Kenichi Watanabe, Yuichi Higuchi, Hideki Yamagata, Yoshitomo Ishizaki

    JOURNAL OF MATERIALS SCIENCE 48 (17) 5801-5809 2013/09

    DOI: 10.1007/s10853-013-7372-z  

    ISSN: 0022-2461

    eISSN: 1573-4803

  110. Extraction of precipitates from age-hardenable Cu-Ti alloys Peer-reviewed

    Satoshi Semboshi, Mikio Ishikuro, Shigeo Sato, Kazuaki Wagatsuma, Takayuki Takasugi

    MATERIALS CHARACTERIZATION 82 (8) 23-31 2013/08

    DOI: 10.1016/j.matchar.2013.04.016  

    ISSN: 1044-5803

    eISSN: 1873-4189

  111. Mechanical properties and microstructures of beta Ti-25Nb-11Sn ternary alloy for biomedical applications Peer-reviewed

    Taek-Kyun Jung, Satoshi Semboshi, Naoya Masahashi, Shuji Hanada

    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS 33 (3) 1629-1635 2013/04

    DOI: 10.1016/j.msec.2012.12.072  

    ISSN: 0928-4931

  112. Formation of titanium hydride in dilute cuti alloy by aging in hydrogen atmosphere and its effects on electrical and mechanical properties*1 Peer-reviewed

    Satoshi Semboshi, Satoshi Yamauchi, Hiroshi Numakura

    Materials Transactions 54 (4) 520-527 2013

    DOI: 10.2320/matertrans.M2012423  

    ISSN: 1345-9678

  113. A new concept of hip joint stem and its fabrication using metastable TiNbSn alloy Peer-reviewed

    Taek-Kyun Jung, Hyo-Soo Lee, Satoshi Semboshi, Naoya Masahashi, Tadasu Abumiya, Shuji Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 536 S582-S585 2012/09

    DOI: 10.1016/j.jallcom.2011.12.077  

    ISSN: 0925-8388

  114. Formation of Titanium Hydride in Dilute Cu-Ti Alloy by Aging in Hydrogen Atmosphere and Its Effects on Electrical and Mechanical Properties Peer-reviewed

    Satoshi Semboshi, Satoshi Yamauchi, Hiroshi Numakura

    JOURNAL OF THE JAPAN INSTITUTE OF METALS 76 (8) 496-503 2012/08

    DOI: 10.2320/jinstmet.76.496  

    ISSN: 0021-4876

    eISSN: 1880-6880

  115. Photo-induced properties of anodic oxide films on Ti6Al4V Peer-reviewed

    Naoya Masahashi, Yoshiteru Mizukoshi, Satoshi Semboshi, Kazuyo Ohmura, Shuji Hanada

    THIN SOLID FILMS 520 (15) 4956-4964 2012/05

    DOI: 10.1016/j.tsf.2012.03.026  

    ISSN: 0040-6090

  116. Hardness modification of aluminum-alloys by means of energetic ion irradiation and subsequent thermal aging Peer-reviewed

    T. Mitsuda, I. Kobayashi, S. Kosugi, Nao Fujita, Y. Saitoh, F. Hori, S. Semboshi, Y. Kaneno, K. Nishida, N. Soneda, S. Ishino, A. Iwase

    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS 272 49-52 2012/02

    DOI: 10.1016/j.nimb.2011.01.030  

    ISSN: 0168-583X

  117. Experimental studies of complex hydride YMn2H6 on formation kinetics and x-ray absorption fine structure analyses Peer-reviewed

    Motoaki Matsuo, Daiju Matsumura, Yasuo Nishihata, Guanqiao Li, Nao Hiyama, Satoshi Semboshi, Shin-ichi Orimo

    APPLIED PHYSICS LETTERS 100 (4) 044101-(1)-044101-(3) 2012/01

    DOI: 10.1063/1.3678032  

    ISSN: 0003-6951

  118. Thin hydroxyapatite coating on titanium fabricated by chemical coating process using calcium phosphate slurry Peer-reviewed

    Naofumi Ohtsu, Yuhki Nakamura, Satoshi Semboshi

    SURFACE & COATINGS TECHNOLOGY 206 (8-9) 2616-2621 2012/01

    DOI: 10.1016/j.surfcoat.2011.11.022  

    ISSN: 0257-8972

  119. Synthesis and Structural Investigation of Metal Hydride, Y(Mn1-xFex)(2)H-y (x &lt;= 0.3, 4.0 &lt;= y &lt;= 4.5) and Complex Hydride, Y(Mn1-xFex)(2)H-6 Peer-reviewed

    Mika Kano, Takashi Ito, Motoaki Matsuo, Shigeyuki Takagi, Satoshi Semboshi, Shin-ichi Orimo

    MATERIALS INTEGRATION 508 310-314 2012

    DOI: 10.4028/www.scientific.net/KEM.508.310  

    ISSN: 1013-9826

  120. Aging of Copper-Titanium Dilute Alloys in Hydrogen Atmosphere: Influence of Prior-Deformation on Strength and Electrical Conductivity Peer-reviewed

    Satoshi Semboshi, Shin-ichi Orimo, Hisashi Suda, Weilin Gao, Akira Sugawara

    MATERIALS TRANSACTIONS 52 (12) 2137-2142 2011/12

    DOI: 10.2320/matertrans.M2011173  

    ISSN: 1345-9678

    eISSN: 1347-5320

  121. Effects of Aging Temperature on Electrical Conductivity and Hardness of Cu-3 at. pct Ti Alloy Aged in a Hydrogen Atmosphere Peer-reviewed

    Satoshi Semboshi, Tomoya Nishida, Hiroshi Numakura, Tala&apos;at Al-Kassab, Reiner Kirchheim

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 42A (8) 2136-2143 2011/08

    DOI: 10.1007/s11661-011-0637-8  

    ISSN: 1073-5623

  122. Evaluation of Nano-scale Precipitates in Cu-Ti Alloys by Small Angle X-ray Scattering Peer-reviewed

    Yohei Takahashi, Shigeo Sato, Satoshi Semboshi, Shigeru Suzuki

    8th International Symposium on Atomic Level Characterizations ''11 471-474 2011/05/22

  123. First-principles studies of complex hydride YMn2H6 and its synthesis from metal hydride YMn2H4.5 Peer-reviewed

    Motoaki Matsuo, Kazutoshi Miwa, Satoshi Semboshi, Hai-Wen Li, Mika Kano, Shin-ichi Orimo

    APPLIED PHYSICS LETTERS 98 (22) 221908-1-221908-3 2011/05

    DOI: 10.1063/1.3597363  

    ISSN: 0003-6951

  124. Cyclic Hydrogenation and Dehydrogenation Property of LiNH2 Impregnated into Ni Foam Peer-reviewed

    Masaharu Menjo, Yoshihiro Hyodo, Satoko Moriyama, Hai-Wen Li, Motoaki Matsuo, Satoshi Semboshi, Shin-ichi Orimo

    MATERIALS TRANSACTIONS 52 (4) 623-626 2011/04

    DOI: 10.2320/matertrans.MA201012  

    ISSN: 1345-9678

    eISSN: 1347-5320

  125. Structural and Hydrogen Desorption Properties of Aluminum Hydride Peer-reviewed

    Kazutaka Ikeda, Hidetoshi Ohshita, Naokatsu Kaneko, Junrong Zhang, Masao Yonemura, Toshiya Otomo, Kentaro Suzuya, Hiroshi Yukawa, Masahiko Morinaga, Hai-Wen Li, Satoshi Semboshi, Shin-ichi Orimo

    MATERIALS TRANSACTIONS 52 (4) 598-601 2011/04

    DOI: 10.2320/matertrans.MA201019  

    ISSN: 1345-9678

    eISSN: 1347-5320

  126. Aging of Cu-3 at% Ti Alloys in Hydrogen Atmosphere: Influence of Hydrogen Pressure on Strength and Electrical Conductivity Peer-reviewed

    Satoshi Semboshi, Tomoya Nishida, Hiroshi Numakura

    MATERIALS TRANSACTIONS 52 (4) 605-609 2011/04

    DOI: 10.2320/matertrans.D-MA201031  

    ISSN: 1345-9678

    eISSN: 1347-5320

  127. Visible light response of nitrogen and sulfur co-doped TiO2 photocatalysts fabricated by anodic oxidation Peer-reviewed

    Yosuke Komai, Kenji Okitsu, Rokuro Nishimura, Naofumi Ohtsu, Goro Miyamoto, Tadashi Furuhara, Satoshi Semboshi, Yoshiteru Mizukoshi, Naoya Masahashi

    CATALYSIS TODAY 164 (1) 399-403 2011/04

    DOI: 10.1016/j.cattod.2010.10.085  

    ISSN: 0920-5861

  128. Fabrication of composite coating comprising bioactive calcium and sodium titanates on titanium using calcium hydroxide slurry containing sodium ions Peer-reviewed

    Naofumi Ohtsu, Satoshi Semboshi, Chikage Abe, Susumu Tokuda

    SURFACE & COATINGS TECHNOLOGY 205 (13-14) 3785-3790 2011/03

    DOI: 10.1016/j.surfcoat.2011.01.035  

    ISSN: 0257-8972

  129. Hardening of Al-Cu-Mg alloy by energetic ion irradiation Peer-reviewed

    T. Mitsuda, I. Kobayashi, S. Kosugi, Nao. Fujita, Y. Saitoh, F. Hori, S. Semboshi, Y. Kaneno, K. Nishida, N. Soneda, A. Iwase

    JOURNAL OF NUCLEAR MATERIALS 408 (2) 201-204 2011/01

    DOI: 10.1016/j.jnucmat.2010.10.013  

    ISSN: 0022-3115

  130. Dielectric properties of anodic oxide film on Nb solid solution/Nb2N two phase alloys Peer-reviewed

    Satoshi Semboshi, Naofumi Ohtsu, Yoshiteru Mizukoshi, Naoya Masahashi

    THIN SOLID FILMS 519 (2) 719-724 2010/11

    DOI: 10.1016/j.tsf.2010.08.131  

    ISSN: 0040-6090

  131. Photo-induced characteristics of a Ti-Nb-Sn biometallic alloy with low Young&apos;s modulus Peer-reviewed

    N. Masahashi, Y. Mizukoshi, S. Semboshi, N. Ohtsu, T. K. Jung, S. Hanada

    THIN SOLID FILMS 519 (1) 276-283 2010/10

    DOI: 10.1016/j.tsf.2010.07.114  

    ISSN: 0040-6090

  132. Effect of Prior Cold-Working on Strength and Electrical Conductivity of Cu-Ti Dilute Alloy Aged in a Hydrogen Atmosphere Peer-reviewed

    Satoshi Semboshi, Hiroshi Numakura, Weilin Gao, Hisashi Suda, Akira Sugawara

    PRICM 7, PTS 1-3 654-656 1315-+ 2010

    DOI: 10.4028/www.scientific.net/MSF.654-656.1315  

    ISSN: 0255-5476

  133. Visible light responses of sulfur-doped rutile titanium dioxide photocatalysts fabricated by anodic oxidation Peer-reviewed

    Yoshiteru Mizukoshi, Naofumi Ohtsu, Satoshi Semboshi, Naoya Masahashi

    APPLIED CATALYSIS B-ENVIRONMENTAL 91 (1-2) 152-156 2009/09

    DOI: 10.1016/j.apcatb.2009.05.018  

    ISSN: 0926-3373

  134. Microstructure and mechanical properties of Cu-3 at.% Ti alloy aged in a hydrogen atmosphere Peer-reviewed

    Satoshi Semboshi, Tomoya Nishida, Hiroshi Numakura

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 517 (1-2) 105-113 2009/08

    DOI: 10.1016/j.msea.2009.03.047  

    ISSN: 0921-5093

  135. Enhanced photocatalytic activity of rutile TiO2 prepared by anodic oxidation in a high concentration sulfuric acid electrolyte Peer-reviewed

    N. Masahashi, Y. Mizukoshi, S. Semboshi, N. Ohtsu

    APPLIED CATALYSIS B-ENVIRONMENTAL 90 (1-2) 255-261 2009/07

    DOI: 10.1016/j.apcatb.2009.03.011  

    ISSN: 0926-3373

  136. Microstructural evolution of Cu-1 at% Ti alloy aged in a hydrogen atmosphere and its relation with the electrical conductivity Peer-reviewed

    Satoshi Semboshi, Talaat Al-Kassab, Ryota Gemma, Reiner Kirchheim

    ULTRAMICROSCOPY 109 (5) 593-598 2009/04

    DOI: 10.1016/j.ultramic.2008.10.015  

    ISSN: 0304-3991

    eISSN: 1879-2723

  137. In-Situ Transmission Electron Microscopy Observation on the Phase Transformation of Ti-Nb-Sn Shape Memory Alloys Peer-reviewed

    Satoshi Semboshi, Takahiro Shirai, Toyohiko J. Konno, Shuji Hanada

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 39A (12) 2820-2829 2008/12

    DOI: 10.1007/s11661-008-9674-3  

    ISSN: 1073-5623

    eISSN: 1543-1940

  138. Superhydrophilicity of Rutile TiO2 Prepared by Anodic Oxidation in High Concentration Sulfuric Acid Electrolyte Peer-reviewed

    Naoya Masahashi, Yoshiteru Mizukoshi, Satoshi Semboshi, Naofumi Ohtsu

    CHEMISTRY LETTERS 37 (11) 1126-1127 2008/11

    DOI: 10.1246/cl.2008.1126  

    ISSN: 0366-7022

    eISSN: 1348-0715

  139. Structural and dielectric properties of anodic oxide film on Nb-Ti alloy Peer-reviewed

    Satoshi Semboshi, Ko-ichi Bando, Naofumi Ohtsu, Yonggu Shim, Toyohiko J. Konno

    THIN SOLID FILMS 516 (23) 8613-8619 2008/10

    DOI: 10.1016/j.tsf.2008.06.039  

    ISSN: 0040-6090

  140. Microstructure and superhydrophilicity of anodic TiO2 films on pure titanium Peer-reviewed

    N. Masahashi, S. Semboshi, N. Ohtsu, M. Oku

    THIN SOLID FILMS 516 (21) 7488-7496 2008/09

    DOI: 10.1016/j.tsf.2008.03.047  

    ISSN: 0040-6090

  141. Calcium-hydroxide slurry processing for bioactive calcium-titanate coating on titanium Peer-reviewed

    Naofumi Ohtsu, Chikage Abe, Tetsuya Ashino, Satoshi Semboshi, Kazuaki Wagatsuma

    SURFACE & COATINGS TECHNOLOGY 202 (21) 5110-5115 2008/07

    DOI: 10.1016/j.surfcoat.2008.05.035  

    ISSN: 0257-8972

  142. Nanostructural evaluation of Cu– 1at.% Ti alloy aged in a deuterium atmosphere by means of FIM and TAP methods Peer-reviewed

    S. Semboshi, R. Gemma, T. Al-Kassab, A. Pundt, R. Kirchheim

    The 51st International Field Emission Symposium (51st IFES) 116 2008/06

  143. Aging behavior of Cu-Ti-Al alloy observed by transmission electron microscopy Peer-reviewed

    Toyohiko J. Konno, Rimi Nishio, Satoshi Semboshi, Tetsu Ohsuna, Eiji Okunishi

    JOURNAL OF MATERIALS SCIENCE 43 (11) 3761-3768 2008/06

    DOI: 10.1007/s10853-007-2233-2  

    ISSN: 0022-2461

  144. Microstructure and electrical conductivity of Cu-Ti alloys aged in hydrogen atmosphere

    S. Semboshi, R. Gemma, T. Al-Kassab, A. Pundt, R. Kirchheim

    Deutsche Physilalische Gesellschaft e.V. (DPG) MM41.13 2008/02

  145. Effect of aging in hydrogen atmosphere on electrical conductivity of Cu-3at.%Ti alloy Peer-reviewed

    Satoshi Semboshi, Toyohiko J. Konno

    JOURNAL OF MATERIALS RESEARCH 23 (2) 473-477 2008/02

    DOI: 10.1557/jmr.2008.0050  

    ISSN: 0884-2914

  146. Microstructural observation of ordered beta-Ta2H in hydrogenated tantalum Peer-reviewed

    Satoshi Semboshi, Toyohiko J. Konno, Naoya Masahashi, Shuji Hanada

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 38A (5) 956-963 2007/05

    DOI: 10.1007/s11661-007-9134-5  

    ISSN: 1073-5623

  147. Transmission electron microscopy observations on Cu-Mg alloy systems Peer-reviewed

    Ken-Ichi Nishikawa, Satoshi Semboshi, Toyohiko J. Konno

    Solid State Phenomena 127 103-108 2007

    Publisher: Trans Tech Publications Ltd

    DOI: 10.4028/www.scientific.net/SSP.127.103  

    ISSN: 1662-9779

  148. Transmission electron microscopy observations on Cu-Mg alloy systems Peer-reviewed

    Ken-ichi Nishikawa, Satoshi Semboshi, Toyohiko J. Konno

    DESIGNING OF INTERFACIAL STRUCTURES IN ADVANCED MATERIALS AND THEIR JOINTS 127 103-+ 2007

    DOI: 10.4028/www.scientific.net/SSP.127.103  

    ISSN: 1012-0394

  149. Fracture behaviors of niobium alloys by hydrogenation and its application for fine powder fabrication Peer-reviewed

    S. Semboshi, N. Masahashi, T. J. Konno, S. Hanada

    THERMEC 2006, PTS 1-5 539-543 2719-+ 2007

    DOI: 10.4028/www.scientific.net/MSF.539-543.2719  

    ISSN: 0255-5476

  150. Powder fabrication of Nb-Ti alloys using hydrogenation process Peer-reviewed

    S. Semboshi, T.J. Konno, N. Masahashi, S. Hanada

    2006 Powder Metallurgy World Congress & Exhibition 165-166 2006/11

  151. In-situ TEM observation during heating and cooling in Ti-Nb-Sn shape memory alloys Peer-reviewed

    T. Shirai, S. Semboshi, H. Matsumoto, T.J. Konno, N. Masahashi, S. Hanada

    The 16th International of Microscopy Congress (IMC 16) 1628 2006/11

  152. Comparative study on the precipitation behavior of Cu-Ti and Cu-Ti-Al alloys Peer-reviewed

    R. Nishio, S. Semboshi, T.J. Konno

    The 16th International of Microscopy Congress (IMC 16) 1659 2006/11

  153. Fracture Behavior of niobium by hydrogenation and its application for fine powder fabrication Peer-reviewed

    S Semboshi, N Masahashi, TJ Konno, S Hanada

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 37A (4) 1301-1309 2006/04

    DOI: 10.1007/s11661-006-1082-y  

    ISSN: 1073-5623

  154. Effect of pressure application on microstructure evolution in a composite of Fe-Al alloy and CrMo steel Peer-reviewed

    N Masahashi, S Semboshi, TJ Konno, S Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 413 (1-2) 281-288 2006/03

    DOI: 10.1016/j.jallcom.2005.05.047  

    ISSN: 0925-8388

    eISSN: 1873-4669

  155. Laminates based on an iron aluminide intermetallic alloy and a CrMo steel Peer-reviewed

    N Masahashi, S Watanabe, N Nomura, S Semboshi, S Hanada

    INTERMETALLICS 13 (7) 717-726 2005/07

    DOI: 10.1016/j.intermet.2004.12.017  

    ISSN: 0966-9795

  156. Transmission electron microscopy observations on Cu-Ti alloy systems Peer-reviewed

    R Nishio, TJ Konno, S Semboshi

    NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS 502 163-168 2005

    DOI: 10.4028/0-87849-980-6.163  

    ISSN: 0255-5476

  157. Composition dependence of hydrogen absorbing properties in melt quenched and annealed TiMn2 based alloys Peer-reviewed

    S Semboshi, N Masahashi, TJ Konno, M Sakurai, S Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 379 (1-2) 290-297 2004/10

    DOI: 10.1016/j.jallcom.2004.02.045  

    ISSN: 0925-8388

    eISSN: 1873-4669

  158. Fracture behavior and microstructural changes of niobium alloys by hydrogenation Invited Peer-reviewed

    S. Semboshi, N. Masahashi, T.J. Konno, S. Hanada

    PFAM XIII, Part I on ASM Materials Solution Conference 301-315 2004/09

    More details Close

    Invited contribution

  159. The fracture behavior and microstructural changes of tantalum by hydrogenation Peer-reviewed

    S. Semboshi, T.J. Konno, N. Masahashi, S. Hanada

    International Conference on New Frontiers of Process Science and Engineering in Advanced Materials (PSEA’04) (2) 110-115 2004/09

  160. Effect of structural changes on degradation of hydrogen absorbing capacity in cyclically hydrogenated TiMn2 based alloys Peer-reviewed

    S Semboshi, M Sakurai, N Masahashi, TJ Konno, S Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 376 (1-2) 232-240 2004/08

    DOI: 10.1016/j.jallcom.2003.12.044  

    ISSN: 0925-8388

  161. Hydrogen pulverization of refractory metals, alloys and intermetallics Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    METALS AND MATERIALS INTERNATIONAL 10 (1) 45-53 2004/02

    ISSN: 1598-9623

  162. Effect of composition and microstructure on hydrogen absorbing properties in binary TiMn2 based alloys Invited Peer-reviewed

    S. Semboshi, N. Masahashi, T.J. Konno, M. Sakurai, S. Hanada

    The Twelfth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XII) 453-464 2003/10

  163. Hydrogenation-induced fragmentation in Ta-Ni alloy Invited Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 359 236-243 2003/09

    DOI: 10.1016/S0925-8388(03)00200-7  

    ISSN: 0925-8388

  164. Effect of composition on hydrogen absorbing properties in binary TiMn2 based alloys Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 352 (1-2) 210-217 2003/03

    DOI: 10.1016/S0925-8388(02)01125-8  

    ISSN: 0925-8388

  165. Multiple cracking of tantalum by hydrogenation Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 34 (3) 685-690 2003/03

    DOI: 10.1007/s11661-003-0102-4  

    ISSN: 1073-5623

  166. Macro- and microstructural changes in hydrogenated TiMn2 and Ta Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 12 (4) 695-701 2002/08

    ISSN: 1003-6326

  167. Hydrogen pulverization in intermetallics-based alloys Peer-reviewed

    S. Semboshi, N. Masahashi, S. Hanada

    MRS Symp. Proc. 646 5161-5166 2001/11

  168. Degradation of hydrogen absorbing capacity in cyclically hydrogenated TiMn2 Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    ACTA MATERIALIA 49 (5) 927-935 2001/03

    DOI: 10.1016/S1359-6454(00)00371-2  

    ISSN: 1359-6454

  169. Macro- and microstructure changes by hydrogenation of tantalum Peer-reviewed

    S Semboshi, N Masahashi, S Hanada

    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II 2283-2286 2001

  170. Superplastic deformation mechanisms of monolithic intermetallics Peer-reviewed

    WY Kim, Y Sato, S Semboshi, S Hanada, H Kokawa

    TOWARDS INNOVATION IN SUPERPLASTICITY II 304-3 147-154 1999

    ISSN: 0255-5476

  171. Hydrogen absorption of Nb-Al alloy bulk specimens Peer-reviewed

    H Hosoda, T Tabaru, S Semboshi, S Hanada

    JOURNAL OF ALLOYS AND COMPOUNDS 281 (2) 268-274 1998/12

    DOI: 10.1016/S0925-8388(98)00793-2  

    ISSN: 0925-8388

  172. Powder preparation by hydrogenation of Nb-Al alloys Invited Peer-reviewed

    H. Hosoda, S. Semboshi, S. Hanada

    International Symposium on Designing, Processing and Properties of Advanced Engineering Materials. ISAEM-97 307-312 1998

  173. Effect of microstructure on hydrogen pulverization of Nb3Al/Nb two phase alloys Peer-reviewed

    S Semboshi, T Tabaru, H Hosoda, S Hanada

    INTERMETALLICS 6 (1) 61-69 1998

    DOI: 10.1016/S0966-9795(97)00058-7  

    ISSN: 0966-9795

  174. Effects of second phases on the pulverization of Nb3Al-base alloys by hydrogenation Peer-reviewed

    S Semboshi, H Hosoda, S Hanada

    JOURNAL OF THE JAPAN INSTITUTE OF METALS 61 (10) 1132-1138 1997/10

    DOI: 10.2320/jinstmet1952.61.10_1132  

    ISSN: 0021-4876

    eISSN: 1880-6880

Show all ︎Show first 5

Misc. 106

  1. Development of Cu-Ti Alloy Wires with Tensile Strength Exceeding 1600 MPa Via Over-aging and Severe Cold Drawing Invited Peer-reviewed

    Satoshi Semboshi

    Materia Japan 64 (6) 383-389 2025/06/01

    Publisher: Japan Institute of Metals

    DOI: 10.2320/materia.64.383  

    ISSN: 1340-2625

    eISSN: 1884-5843

  2. 「金属素描」 “銅(Copper)“ Peer-reviewed

    千星聡

    まてりあ (日本金属学会誌会報) 50 5-5 2021/01

  3. 金属材料の組織形成と熱処理の基礎(6) 鉄鋼のマルテンサイト変態と作刀技術

    千星聡

    金属 (アグネ技術センター) 90 961-968 2020

  4. 金属材料の組織形成と熱処理の基礎(5) 時効材の組織形成 [2] ~強化機構~

    千星聡

    金属 (アグネ技術センター) 90 873-879 2020

  5. 金属材料の組織形成と熱処理の基礎(4) 時効材の組織形成 [1] ~析出物の形成~

    千星聡

    金属 (アグネ技術センター) 90 765-772 2020

  6. 金属材料の組織形成と熱処理の基礎(3) 加工材の組織形成と熱処理

    千星聡

    金属 (アグネ技術センター) 90 683-690 2020

  7. 金属材料の組織形成と熱処理の基礎(2) 鋳造材の組織形成とその制御

    千星聡

    金属 (アグネ技術センター) 90 593-600 2020

  8. 金属材料の組織形成と熱処理の基礎(1) 状態図の見方と活用

    千星聡

    金属 (アグネ技術センター) 90 513-520 2020

  9. 金属水化合物を利用した技術の発展を目指して Peer-reviewed

    千星 聡

    まてりあ(日本金属学会誌会報) 10 (10) 854-857 2004

    Publisher: The Japan Institute of Metals and Materials

    DOI: 10.2320/materia.43.854  

    ISSN: 1340-2625

  10. SiO2へのAgおよびCo二重イオン照射注入による生成粒子の照射順序依存性

    松尾駿之介, 矢倉稜斗, 岩瀬彰宏, 岩瀬彰宏, 松井利之, 松井利之, 田口昇, 田中真悟, 千星聡, 堀史説, 堀史説

    日本金属学会講演大会(Web) 174th 2024

  11. Cu-Ti-Al-Fe系合金における疲労き裂の発生および進展挙動に及ぼすAl・Fe添加の影響

    橋本拓也, 鎌田俊哉, 兵藤宏, 渡辺宏治, 千星聡, 宮本吾郎, 山崎倫昭

    日本銅学会講演大会講演概要集 63rd 2023

  12. 二重イオン照射により合成したAgNi複合粒子の光学特性および構造評価

    山田智子, 松尾駿之介, 岩瀬彰宏, 松井利之, 堀史説, 田口昇, 田中真悟, 千星聡

    大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2022 2023

  13. Ag,Co二重イオン照射によるa-SiO2中金属ナノ複合体合成と評価

    松尾駿之介, 金野泰幸, 岩瀬彰宏, 松井利之, 堀史説, 田口昇, 田中真悟, 千星聡

    大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2022 2023

  14. 高エネルギー電子線照射したCu-Ti合金の硬度変化と導電率変化の相関

    岩瀬彰宏, 岩瀬彰宏, 千星聡, 斎藤勇一, 堀史説

    日本金属学会講演大会(Web) 172nd 2023

  15. AgとCo二重イオン照射注入によるSiO2中での金属ナノ複合化

    松尾駿之介, 岩瀬彰宏, 松井利之, 田口昇, 田中真悟, 千星聡, 堀史説

    日本金属学会講演大会(Web) 173rd 2023

  16. 低積層欠陥エネルギー銅合金伸線加工材の組織と強度

    千星聡, 正橋直哉, 荒内隆誓, 金野泰幸, CHOI Eun-Ae, ZEON Han Seung

    日本金属学会講演大会(Web) 172nd 2023

  17. Control of metal nanocomposites formation in amorphous glass by multi-ions irradiation

    山田智子, 田口昇, 田中真悟, 岩瀬彰宏, 岩瀬彰宏, 松井利之, 千星聡, 堀史説

    ナノ学会大会講演予稿集 20th 2022

  18. 電子線照射によるCu-Ti合金の硬度と導電率の改質

    岩瀬彰宏, 岩瀬彰宏, 千星聡, 斎藤勇一, 堀史説

    日本金属学会講演大会(Web) 171st 2022

  19. SiO2への複合イオン照射による複合ナノ粒子生成に及ぼす照射順効果

    堀史説, 山田智子, 松井利之, 千星聡, 岩瀬彰宏, 田口昇, 田中慎吾

    大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2021 2022

  20. 強度,耐変色性,製造性に優れたVCM板ばね向けCu-Ni-Al合金の開発 Peer-reviewed

    首藤俊也, 笠谷周平, 兵藤宏, 渡辺宏治, 成枝宏人, 菅原章, 千星聡

    まてりあ (日本金属学会誌会報) 60 119-121 2021/02

  21. Shape change and its property of metal nanoparticles in SiO2 glass by multiple ion irradiation

    山田智子, 岩瀬彰宏, 松井利之, 千星聡, 石川法人, 斎藤勇一, 前川雅樹, 河裾厚男, 雨倉宏, 堀史説

    ナノ学会大会講演予稿集 19th 2021

  22. Ag-Ni複合イオン照射による固体ガラス内ナノ構造体の合成

    山田智子, 岩瀬彰宏, 松井利之, 堀史説, 前川雅樹, 河裾厚男, 田口昇, 田中慎吾, 正橋直哉, 千星聡

    大阪府立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2019 2021

  23. 異種イオン多重注入によるアモルファスガラス中での多元系ナノ粒子の合成

    山田智子, 鷹野陽弘, 杉田健人, 岩瀬彰宏, 前川雅樹, 河裾厚男, 田口昇, 田中真悟, 正橋直哉, 千星聡, 堀史説

    日本金属学会講演大会(Web) 166th 2020

  24. Characterization of nanoparticles in SiO2 synthesized by Ag and Ni dual ion beam irradiation

    山田智子, 岩瀬彰宏, 松井利之, 前川雅樹, 河裾厚男, 正橋直哉, 千星聡, 堀史説

    日本物理学会講演概要集(CD-ROM) 75 (2) 2020

    ISSN: 2189-079X

  25. 高エネルギー荷電粒子照射と熱処理を組み合わせた複合反応場によるアルミ合金内ナノクラスター生成と表面硬度制御

    岩瀬彰宏, 堀史説, 千星聡, 斉藤勇一

    日本金属学会講演概要(CD-ROM) 164th 2019

    ISSN: 2433-3093

  26. イオン照射による高密度エネルギー付与がもたらす合金の結晶構造変態

    岩瀬彰宏, 金野泰幸, 堀史説, 千星聡, 斉藤勇一, 石川法人

    日本物理学会講演概要集(CD-ROM) 74 (1) 2019

    ISSN: 2189-079X

  27. ピーク時効,過時効処理したCu‐Ti合金の伸線加工にともなう特性および組織の変化

    千星聡, 正橋直哉, 岩瀬彰宏, 高杉隆幸

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.368 2018/03/05

    ISSN: 1342-5730

  28. イオン注入により石英ガラス中に生成された鉄ナノ微粒子の放射光XAFS測定による構造評価

    福田健吾, 越智雅明, 千星聡, 斎藤勇一, 堀史説, 松井利之, 岡本芳浩, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.S6.6 2018/03/05

    ISSN: 1342-5730

  29. 炭化物粒子複合型Ni基超々合金肉盛層に及ぼす炭化物種およびレーザ加工プロセスの影響

    田中美樹, 金野泰幸, 高杉隆幸, 山口拓人, 萩野秀樹, 千星聡

    日本金属学会講演概要(CD-ROM) 162nd ROMBUNNO.P37 2018/03/05

    ISSN: 1342-5730

  30. シリカガラス中へのイオン照射により生成する銀ナノ粒子形態制御と特性

    堀史説, 福田健吾, 岩瀬彰宏, 千星聡, 斎藤勇一, 石川法人, 岡本芳浩, 雨倉宏

    日本物理学会講演概要集(CD-ROM) 73 (2) 2018

    ISSN: 2189-079X

  31. Ni系金属間化合物への重イオン照射による非晶質化

    鷹野陽弘, 小島啓, 越智雅明, 岩瀬彰宏, 金野泰幸, 千星聡, 加藤秀実, 岡本芳浩, 斎藤雄一, 堀史説

    日本物理学会講演概要集(CD-ROM) 73 (2) 2018

    ISSN: 2189-079X

  32. イオン注入と高エネルギーイオン照射による透明酸化物の光吸収特性制御

    堀史説, 福田健吾, 岩瀬彰宏, 千星聡, 齋藤勇一, 高木秀彰, 石川法人

    放射線プロセスシンポジウム講演要旨・ポスター発表要旨集 17th 2018

  33. ピーク時効,過時効処理したCu-Ti合金の伸線加工にともなう特性および組織の変化

    千星聡, 正橋直哉, 岩瀬彰宏, 高杉隆幸

    日本金属学会講演概要(CD-ROM) 162nd 2018

    ISSN: 2433-3093

  34. 透明SiO2ガラスへのAgイオン注入および重イオン照射によるナノ粒子形態制御と光学特性

    堀史説, 福田健吾, 岩瀬彰宏, 千星聡, 斎藤勇一, 石川法人, 岡本芳浩, 雨倉宏

    日本金属学会講演概要(CD-ROM) 163rd 2018

    ISSN: 2433-3093

  35. イオン注入により石英ガラス中に生成された鉄ナノ微粒子の放射光XAFS測定による構造評価

    福田健吾, 越智雅明, 千星聡, 斎藤勇一, 堀史説, 松井利之, 岡本芳浩, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 162nd 2018

    ISSN: 2433-3093

  36. 高強度-高導電性チタン銅合金線材の開発:最適な熱加工プロセスの検討

    千星 聡, 金野 泰幸, 高杉 隆幸

    日本学術振興会合金状態図第172委員会第34回研究会報告書 18 (1) 30-35 2018

  37. 高強度-高導電性チタン銅合金線材の開発:合金組成の影響

    千星 聡, 高杉 隆幸, 正橋直哉, 金野 泰幸

    日本学術振興会合金状態図第172委員会第35回研究会報告書 18 (2) 19-24 2018

  38. Ni3Al-Ni3V複相金属間化合物合金の組織形成と硬化挙動におよぼす遷移金属元素の効果

    五百蔵一成, 金野泰幸, 千星 聡, 高杉隆幸

    日本学術振興会合金状態図第172委員会第35回研究会報告書 18 (2) 35-45 2018

  39. Vを添加したNi3Al合金の時効処理にともなう組織および強度の変化

    千星 聡, 佐々木 亮介, 金野 泰幸, 岩瀬 彰宏, 高杉 隆幸

    (独)日本学術振興会「合金状態図172委員会」 第33回研究報告書 83-84 2017/10

  40. 金属ナノ粒子を含んだシリカガラスの物性評価と高エネルギー重イオン照射効果

    福田健吾, 斎藤勇一, 千星聡, 岡本芳浩, 堀史説, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 161st ROMBUNNO.P15 2017/08/23

    ISSN: 1342-5730

  41. 高エネルギー粒子線により非磁性体中に生成された鉄ナノ粒子の磁気特性

    岩瀬彰宏, 福田健吾, 千星聡, 堀史説, 松井利之, 斎藤勇一

    日本金属学会講演概要(CD-ROM) 161st ROMBUNNO.S5.12 2017/08/23

    ISSN: 1342-5730

  42. 抽出分離を利用した時効析出型Cu‐Ni‐Si合金の組織解析

    千星聡, 石黒三岐雄, 正橋直哉, 岩瀬彰宏, 高杉隆幸

    日本金属学会講演概要(CD-ROM) 161st ROMBUNNO.232 2017/08/23

    ISSN: 1342-5730

  43. 高強度-高導電性チタン銅合金の開発のための基盤研究

    千星 聡, 須田 久, 菅原 章

    平成29年度 全国鉱山・製錬所現場現場担当者会議 新素材現場担当者会議講演集 19-25 2017/06

  44. 水素を利用した時効析出型Cu-Ti合金の組織制御

    千星 聡, 高杉 隆幸, 岩瀬 彰宏, 須田 久

    (独)日本学術振興会「合金状態図172委員会」第32回研究報告書 114-119 2017/04

  45. 水素によるCu‐Ti合金中不連続析出物生成の抑制

    千星聡, 千星聡, 岩瀬彰宏, 高杉隆幸, 須田久

    日本金属学会講演概要(CD-ROM) 160th ROMBUNNO.144 2017/03/01

    ISSN: 1342-5730

  46. レーザ肉盛法によって作製したNi基超々合金コーティング層に及ぼす熱処理の効果

    奥野武志, 金野泰幸, 高杉隆幸, 山口拓人, 萩野秀樹, 千星聡

    日本金属学会講演概要(CD-ROM) 160th ROMBUNNO.P52 2017/03/01

    ISSN: 1342-5730

  47. 高強度-高導電性Cu-Ti合金線材の作製

    千星聡, 岩瀬彰宏, 高杉隆幸, 中吉勲, 清水敏明

    日本銅学会講演大会講演概要集 57th 2017

  48. 水素中時効によるCu-Ti合金中不連続析出物生成の抑制

    千星聡, 岩瀬彰宏, 高杉隆幸, 兵藤宏, 須田久

    日本銅学会講演大会講演概要集 57th 2017

  49. Ni基金属間化合物のイオン照射誘起構造変態における照射温度依存性と照射後焼鈍効果

    小島啓, 越智雅明, 金野泰幸, 千星聡, 斎藤勇一, 堀史説, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 160th 2017

    ISSN: 2433-3093

  50. 水素によるCu-Ti合金中不連続析出物生成の抑制

    千星聡, 千星聡, 岩瀬彰宏, 高杉隆幸, 須田久

    日本金属学会講演概要(CD-ROM) 160th 2017

    ISSN: 2433-3093

  51. 金属ナノ粒子を含んだシリカガラスの物性評価と高エネルギー重イオン照射効果

    福田健吾, 斎藤勇一, 千星聡, 岡本芳浩, 堀史説, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 161st 2017

    ISSN: 2433-3093

  52. 高エネルギー粒子線により非磁性体中に生成された鉄ナノ粒子の磁気特性

    岩瀬彰宏, 福田健吾, 千星聡, 堀史説, 松井利之, 斎藤勇一

    日本金属学会講演概要(CD-ROM) 161st 2017

    ISSN: 2433-3093

  53. 抽出分離を利用した時効析出型Cu-Ni-Si合金の組織解析

    千星聡, 石黒三岐雄, 正橋直哉, 岩瀬彰宏, 高杉隆幸

    日本金属学会講演概要(CD-ROM) 161st 2017

    ISSN: 2433-3093

  54. Lattice structure transformation NiTi intermetallic compound induced by energetic ion bombardment

    M. Ochi, H. Kojima, R. Mayumi, K. Fukuda, S. Semboshi, F. Hori, Y. Kaneno, Y. Kaneno, Y. Saitoh, Y. Okamoto, A. Iwase

    Photon Factory Activity Report 2016 34 2017

  55. Microstructure of implanted Fe nanoparticles in silica glass and their effect on magnetic properties

    K. Fukuda, M. Ochi, H. Kojima, R. Mayumi, Y. Okamoto, S. Semboshi, Y. Saitoh, F. Hori, A. Iwase

    Photon Factory Activity Report 2016 34 2017

  56. 二重複相Ni3Al-Ni3V金属間化合物合金におけるナノヘテロ微細組織

    千星 聡, 金野泰幸, 高杉隆幸

    まてりあ 12 (12) 604-604 2016/12

    Publisher: The Japan Institute of Metals and Materials

    DOI: 10.2320/materia.55.604  

  57. 時効硬化型チタン銅合金における等温変態図 Peer-reviewed

    天野晋太郎, 千星 聡, 岩瀬 彰宏, 高杉 隆幸, 須田 久, 佐々木 史明, 菅原 章

    銅と銅合金 55 168-173 2016/11

    ISSN: 1347-7234

  58. Ni3V-Ni3Al擬二元系合金における組成・組織と熱伝導性の関係

    千星 聡, 津田 紘之, 金野 泰幸, 高杉 隆幸

    (独)日本学術振興会「合金状態図172委員会」第31回 研究報告書 53-58 2016/10/21

  59. 複合電析法によるチタニア粒子分散強化型銅材料の作製 Peer-reviewed

    千星 聡, 正橋 直哉, 阪本 康弘, 八木 俊介, 岩瀬 彰宏

    銅と銅合金 55 114-118 2016/08

    ISSN: 1347-7234

  60. 高エネルギー重イオン照射によるNi基金属間化合物の非平衡結晶構造の発現

    小島啓, 吉崎宥章, 金野泰幸, 堀史説, 千星聡, 岡本芳浩, 斎藤勇一, 石川法人, 岩瀬彰宏

    日本物理学会講演概要集(CD-ROM) 71 (1) 2016

    ISSN: 2189-079X

  61. Ni-Ni3Al-Ni3V系合金の熱伝導率に及ぼす組成と組織の影響

    竹内達郎, 金野泰幸, 岩瀬彰宏, 高杉隆幸, 千星聡

    材料とプロセス(CD-ROM) 29 (1) 2016

    ISSN: 1882-8922

  62. 抽出分離法を利用した時効析出型銅合金の定量的組織解析

    千星聡, 石黒三岐雄, 佐藤成男, 岩瀬彰宏, 高杉隆幸

    材料とプロセス(CD-ROM) 29 (2) 2016

    ISSN: 1882-8922

  63. 高エネルギー重イオン照射と焼鈍を用いたNi基金属間化合物の結晶構造変化と表面硬さ制御

    小島啓, 吉崎宥章, 藤村勇貴, 金野泰幸, 堀史説, 千星聡, 斎藤勇一, 岡本芳浩, 石川法人, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 158th 2016

    ISSN: 2433-3093

  64. Ni-Ni3Al-Ni3V擬三元系合金の熱伝導率

    竹内達郎, 金野泰幸, 岩瀬彰宏, 高杉隆幸, 千星聡

    日本金属学会講演概要(CD-ROM) 158th 2016

    ISSN: 2433-3093

  65. Cu基CuFe合金におけるFe析出物の構造及び磁気特性変化

    藤村勇貴, 千星聡, 岡本芳浩, 西田憲二, 松井利之, 堀史説, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 158th 2016

    ISSN: 2433-3093

  66. Cu-Ni-Si合金における不連続析出物の生成挙動

    千星聡, 千星聡, 岩瀬彰宏, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 158th 2016

    ISSN: 2433-3093

  67. V添加したNi3Al合金における時効析出・硬化現象

    佐々木亮介, 千星聡, 長迫実, 岩瀬彰宏, 金野泰孝, 高杉隆幸

    日本金属学会講演概要(CD-ROM) 159th 2016

    ISSN: 2433-3093

  68. Fe,Agイオン注入したSiO2における金属ナノ粒子生成と磁気特性・光学特性

    福田健吾, 千星聡, 堀史説, 岡本芳浩, 斎藤勇一, 松井利之, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 159th 2016

    ISSN: 2433-3093

  69. Ni基金属間化合物の結晶構造変化と表面硬さ制御におけるイオンビームプロセスの適用

    小島啓, 金野泰幸, 千星聡, 斎藤勇一, 岡本芳浩, 石川法人, 堀史説, 越智雅明, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 159th 2016

    ISSN: 2433-3093

  70. 単結晶,多結晶Cu-Ti合金における時効析出挙動の比較

    千星聡, 千星聡, 岩瀬彰宏, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 157th 2015

    ISSN: 2433-3093

  71. 高エネルギー重イオン照射によるNi基金属間化合物の非平衡結晶構造の発現と表面硬度制御

    小島啓, 吉崎宥章, 越智雅明, 金野泰幸, 堀史説, 千星聡, 岡本芳浩, 斉藤勇一, 石川法人, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 157th 2015

    ISSN: 2433-3093

  72. 時効硬化型Cu-Ti合金におけるTTT図の作製

    天野晋太郎, 千星聡, 千星聡, 岩瀬彰宏, 岩瀬彰宏

    日本金属学会講演概要(CD-ROM) 157th 2015

    ISSN: 2433-3093

  73. プラズマ浸炭によるCu-Ti希薄合金の表面改質

    千星聡, 千星聡, 岩瀬彰宏, 辻宣佳

    日本金属学会講演概要(CD-ROM) 156th 2015

    ISSN: 2433-3093

  74. Ni基金属間化合物の高エネルギーイオン照射による構造変態と表面硬度変化

    小島啓, 吉崎宥章, 橋本明宙, 金野泰幸, 堀史説, 岩瀬彰宏, 千星聡, 岡本芳浩, 斉藤勇一

    日本金属学会講演概要(CD-ROM) 156th 2015

    ISSN: 2433-3093

  75. Ni3(Si,Ti)の熱伝導性における組成の影響

    竹内達郎, 金野泰幸, 岩瀬彰宏, 高杉隆幸, 千星聡

    日本金属学会講演概要(CD-ROM) 156th 2015

    ISSN: 2433-3093

  76. “極微量Bを添加した時効硬化型Cu-Ti合金における不連続析出物の生成挙動

    千星 聡, 池田 潤, 岩瀬 彰宏, 高杉 隆幸, 鈴木 茂, 木村 崇, 高 維林, 菅原 章

    銅と銅合金 54 21-26 2015

    ISSN: 1347-7234

  77. プラズマ窒化法による時効硬化型Cu-Ti合金の表面改質 Peer-reviewed

    千星 聡, 岩瀬 彰宏, 木村 崇, 高 維林, 菅原 章

    銅と銅合金 54 125-129 2015

    ISSN: 1347-7234

  78. 抽出分離法を利用した時効析出型Cu-Ti合金の組織解析

    千星 聡, 石黒 三岐雄, 佐藤 成男, 岩瀬 彰宏, 高杉 隆幸

    (独)日本学術振興会「合金状態図172委員会」第30回 研究報告書 61-68 2015

  79. Ni基超々合金のチャンネル領域での微細析出組織形成

    高杉 隆幸, 金野 泰幸, 千星 聡

    (独)日本学術振興会「合金状態図172委員会」第29回 研究報告書 44-51 2015

  80. Ni基超々合金の熱伝導率に及ぼす組成および組織の影響

    津田紘之, 金野泰幸, 岩瀬彰宏, 高杉隆幸, 千星聡

    材料とプロセス(CD-ROM) 27 (1) 2014

    ISSN: 1882-8922

  81. 電析法を利用した硬質ナノ粒子分散強化型銅複合材料の作製

    千星聡, 正橋直哉, 井上博之, 岩瀬彰宏, 阪本康弘, 阪本康弘

    日本金属学会講演概要(CD-ROM) 155th 2014

    ISSN: 2433-3093

  82. 高エネルギーイオン励起反応場による金属間化合物の構造相変態と硬度・磁性制御

    岩瀬彰宏, 金野泰幸, 堀史説, 松井利之, 吉崎宥章, 小出哲也, 小島啓, 斉藤勇一, 千星聡

    日本金属学会講演概要(CD-ROM) 155th 2014

    ISSN: 2433-3093

  83. 高エネルギービームによる金属間化合物の非熱平衡状態の発現と物性制御

    小島啓, 吉崎宥章, 橋本明宙, 金野泰幸, 堀史説, 岩瀬彰宏, 千星聡, 岡本芳浩, 斉藤勇一

    日本金属学会講演概要(CD-ROM) 155th 2014

    ISSN: 2433-3093

  84. 時効硬化型Cu-Ti合金の析出挙動に及ぼす極微量B添加の影響

    池田潤, 岩瀬彰宏, 高杉隆幸, 千星聡, 鈴木茂

    日本金属学会講演概要(CD-ROM) 155th 2014

    ISSN: 2433-3093

  85. プラズマ窒化によるCu-Ti希薄合金の表面改質

    千星聡, 岩瀬彰宏, 大津直史, 辻宣佳

    日本金属学会講演概要(CD-ROM) 154th 2014

    ISSN: 2433-3093

  86. 放射光EXAFS法を用いたCuFe合金のFe析出挙動の研究

    藤村勇貴, 堀史説, 岩瀬彰宏, 岡本芳浩, 石川法人, 斎藤勇一, 千星聡

    日本金属学会講演概要(CD-ROM) 155th 2014

    ISSN: 2433-3093

  87. 窒素添加したCu-Ti合金の時効析出挙動および特性変化 Peer-reviewed

    池田 潤, 千星 聡, 岩瀬 彰宏, 高 維林, 菅原 章

    銅と銅合金 53 62-67 2014

    ISSN: 1347-7234

  88. X線回折サイドバンドピークに基づく時効強化型Cu-Ti合金におけるチタン濃度揺らぎ領域の解析 Peer-reviewed

    佐藤 成男, 長谷川 啓史, 千星 聡, 我妻 和明

    銅と銅合金 53 (1) 166-170 2014

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

  89. 高エネルギーイオン照射によるAlMgSi合金の微細組織変化と表面硬さ制御

    植山大地, 津田大, 金野泰幸, 堀史説, 岩瀬彰宏, 西田憲二, 土肥謙次, 曾根田直樹, 斎藤勇一, 千星聡

    日本金属学会講演概要(CD-ROM) 152nd 2013

    ISSN: 2433-3093

  90. 微量窒素添加したCu-Ti合金の時効による特性と組織の変化

    池田潤, 岩瀬彰宏, 千星聡

    日本金属学会講演概要(CD-ROM) 153rd 2013

    ISSN: 2433-3093

  91. Ni基金属間化合物合金の熱伝導率に及ぼす組成の影響

    津田紘之, 津田紘之, 金野泰幸, 岩瀬彰宏, 高杉隆幸, 千星聡

    日本金属学会講演概要(CD-ROM) 153rd 2013

    ISSN: 2433-3093

  92. 抽出分離法を利用したCu-Ti合金中時効析出物の定量的評価 Peer-reviewed

    千星 聡, 石黒 三岐雄, 佐藤 成男, 我妻 和明, 高杉 隆幸, 高 維林, 菅原 章

    銅と銅合金 52 (1) 30-35 2013

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

    More details Close

    第47回論文賞

  93. 水素中で時効したCu-4.2 at.% Ti 合金の強度、導電性に及ぼす予ひずみの効果 Peer-reviewed

    千星聡, 折茂慎一, 須田久, 鈴木基彦, 高維林, 菅原章

    銅と銅合金 50 (1) 185-189 2011

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

    More details Close

    第45回論文賞

  94. X線小角散乱法を用いた水素中時効Cu-Ti合金の析出挙動解析 Peer-reviewed

    高橋洋平, 佐藤茂男, 千星聡, 鈴木茂

    銅と銅合金 50 (1) 190-193 2011

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

  95. 水素雰囲気中時効Cu-3 at.% Ti合金の硬さ、導電率および組織へ及ぼす水素圧力の影響, Peer-reviewed

    千星聡, 西田智哉, 沼倉宏

    銅と銅合金 49 (1) 144-148 2010

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

  96. 水素化時効プロセスによる高強度、高導電性チタン銅合金の創製

    千星聡, 今野豊彦, 佐藤和久

    東北大学金属材料研究所付属研究施設大阪センター中間報告書 32-34 2009/11

  97. 照射促進偏析現象を利用したAlCu合金の硬度制御

    光田智昭, 小林一平, 堀史説, 金野泰幸, 千星聡, 斉藤勇一, 曾根田直樹, 西田憲二, 石野栞, 岩瀬彰宏

    日本金属学会講演概要 145th 2009

    ISSN: 1342-5730

  98. 重水素雰囲気中で時効したCu-3at.% Ti合金の組織および硬さ・導電性に及ぼす時効温度の影響 Peer-reviewed

    千星聡, 西田智哉, 沼倉宏, T. Al-Kassaab, R. Kirchheim

    銅と銅合金 48 (1) 86-91 2009

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

  99. 水素雰囲気中で時効処理したCu- 3 at.% Ti合金の組織、強度と導電率 Peer-reviewed

    千星聡, 西田智哉, 沼倉宏, 今野豊彦

    銅と銅合金 47 (1) 165-170 2008

    Publisher: 日本伸銅協会

    ISSN: 1347-7234

    More details Close

    第42回論文賞

  100. Development of novel solid electrolyte capacitors -dielectric properties of anodically oxidized film on Nb-Ti alloys

    S. Semboshi

    KINNKEN Research Highlight 50 2007

    Publisher: Institute for Materials Research, Tohoku University

  101. Fe-Al合金/CrMo鋼拡散接合材の組織形成に及ぼすHIP圧力印加の効果

    N. Masahashi, S. Sebmoshi, T.J.Konno, S.Hanada

    Practical Microscopy Techniques for Materials Development 2006/03/20

    Publisher: The Japan Institute of Metals

  102. Development of advanced electrode materials for electrolytic capacitors

    千星聡

    近畿地方発明センター平成17年度研究助成報告書 1-6 2006

  103. Production of tantalum powder by hydrogenation proces

    千星聡, 正橋直哉, 花田修治

    Annual Report of Hosokawa Powder Technology Foundation 124-130 2004

    Publisher: ホソカワ粉体工業学振興財団

  104. TiMn2合金の水素吸蔵特性と局所構造変化

    桜井雅樹, 千星聡, 正橋直哉, 花田修治, 松原英一郎

    日本金属学会講演概要 132nd 349 2003/03/27

    ISSN: 1342-5730

  105. 水素吸収したTiMn2ラーベス相合金の微細組織

    千星聡, 細田秀樹, 正橋直哉, 花田修治

    新素材設計開発施設共同利用研究報告書 1999 155-156 2000/06

  106. Nb_3Al基合金の水素処理による粉化に及ぼす第2相の影響

    千星聡

    日本金属学会誌 61 1132-1138 1997

Show all ︎Show first 5

Books and Other Publications 2

  1. 水素の事典

    千星聡, 折茂慎一

    朝倉書店 2014/04

  2. Practical microscopy techniques for materials development

    正橋直哉, 千星聡, 今野豊彦, 花田修治

    日本金属学会 2006/03

    ISBN: 4889030743

    More details Close

    出版編集委員会総括責任者 : 越後谷淳一 出版編集委員会編集委員長 : 弘津禎彦

Presentations 110

  1. 低温焼鈍によるCu/Cu4Ti複相合金線材の強度向上

    佛圓大河, 金野泰幸, 千星聡, 廣井慧

    日本銅学会 2024/10/20

  2. Ni/Al比を変化させたCu-Ni-Al合金の析出挙動の調査

    笠谷周平, 鎌田俊哉, 渡辺宏治, 千星聡

    日本銅学会 2024/10/20

  3. Al,FeをマイクロアロイングしたCu-Ti合金のレプリカ法による組織解析

    千星聡, 橋本拓也, 兵藤宏

    日本銅学会 2024/10/19

  4. Cu/Cu4Ti 複相合金線材の低温焼鈍硬化

    佛圓大河, 金野泰幸, 千星聡

    日本金属学会 2024/09/18

  5. Cu-Ni-Al 合金圧延材の強度に及ぼす低温焼鈍条件の影響

    西村侑真, 金野泰幸, 佐藤成男, 千星聡

    日本金属学会 2024/09/18

  6. 高機能複相銅合金創製のための基礎的・実践的研究(Cu-Ni-Al合金の開発)

    千星聡, 伊藤和博

    国際・産学連携インヴァースイノベーション材料創出プロジェクト(DEJl²MA プロジェクト) 第二回公開討論会 2024/03/09

  7. Cu-Ni-Al合金における加工軟化および低温時効硬化

    千星聡,佐藤成男,笠谷周平,兵藤宏

    日本銅学会 2023/11/03

  8. 低積層欠陥エネルギー銅合金の伸線加工による組織と強度の変化

    千星聡, 正橋直哉, 荒内隆誓, 金野泰幸

    合金状態図研究会(第三回研究会) 2023/05/26

  9. 高機能複相銅合金創製のための基礎的・実践的研究

    千星聡, 伊藤和博

    国際・産学連携インヴァースイノベーション材料創出プロジェクト(DEJl²MA プロジェクト) 第一回公開討論会 2023/03/11

  10. 低積層欠陥エネルギー銅合金伸線加工材の組織と強度

    千星聡, 正橋直哉, 荒内隆誓, 金野泰幸, Choi Eun-Ae, Han Seung Zeon

    日本金属学会 2023/03/08

  11. Cu-Ni-Al 合金における低温時効硬化現象

    千星聡

    合金状態図研究会(第二回研究会) 2022/12/09

  12. Strength and electrical conductivity of Cu-In solid solution alloy wires

    S. Semboshi, Y. Abe, N. Masahashi

    Visual-JW 2022 & The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA) 2022/10/25

  13. 複相強化型Cu-Ti合金薄板材の作製

    千星聡, 佐藤成男, 瀧藤優斗, 金野泰幸, 兵藤宏

    日本銅学会 2022/10/15

  14. Development of high-strength and high-electrical conductive Cu-Ti alloy wires

    S. Sembosh

    Dalian University of Technology and Tohoku University joint workshop on Advanced Materials 2022/05/23

  15. Magnetic properties of ferrimagnetic chalcogenide compounds (Cr,Fe)Se

    W. Yin, M. Miyakawa, S. Semboshi, R.Y. Umetsu

    2024 15th International Conference on Materials and Manufacturing Technologies (ICMMT 2024) 2023/03/23

  16. Critical Current Properties and Structural Defects in High-Tc GdBa2Cu3Oy Superconducting Films Irradiated with 10 MeV Au-ions

    T. Ozaki, H. Okazaki, H. Koshikawa, S. Yamamoto, T. Yamaki, M. Saeki, S. Semboshi, T. Sueyoshi, H. Sakane

    応用物理学会 薄膜・表面物理分科会 第24回「イオンビームによる表面・界面の解析と改質」特別研究会 2024/10/17

  17. Ni 基二重複相金属間化合物合金の組織と機械的特性に及ぼすCu添加の影響

    上田航平, 金野泰幸, 千星聡

    日本金属学会 2024/09/18

  18. Nb添加非化学量論組成化Ni基超々合金の組成最適化

    矢野陸斗, 金野泰幸, 千星聡

    日本金属学会 2024/09/18

  19. 高強度-高導電性Cu-Ti合金板箔材作製のための適切な加工熱処理工程

    千星聡, 正橋直哉, 瀧藤優斗, 金野泰幸, 兵藤宏

    日本金属学会 2022/03/17

  20. Recent study on high-strength and high-electrical conductive Cu alloys

    2021 4th JOINT SYMPOSIUM of Taipei Tech.-Tohoku Univ. 2021/11/30

  21. Cu-20 at.% Ni-6.7 at.% Al合金における時効析出挙動

    千星聡

    日本金属学会 状態図・計算熱力学研究会 第一回研究会 2021/06/28

  22. ラメラ組織を有するCu-Ti合金の引抜き加工による高強度-高導電性線材の作製

    千星聡, 正橋直哉, 金野泰幸

    日本塑性加工学会 2021/06/05

  23. Cu-20 at.% Ni-6.7 at.% Al合金の等温相変態図

    千星聡, 榛木隆太, 金野泰幸, 首藤俊也, 兵藤宏

    日本金属学会 2021/03/17

  24. Cu-Ni-Al系合金の時効析出硬化挙動

    千星聡, 榛木隆太, 金野泰幸, 首藤俊也, 兵藤宏

    学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト 第四回公開討論会 2020/11/30

  25. レーザ照射によるNi3Al/Ni3V二重複相合金の一方向結晶配向化

    千星聡, 川人洋介, 金野泰幸, 高杉隆幸, 中村浩

    日本金属学会 2020/09/16

  26. レーザ照射によるNi基二重複相合金の組織制御 II

    千星聡, 川人洋介, 金野泰幸, 高杉隆幸

    学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト 第三回公開討論会 2019/03/05

  27. 高強度-高導電性Cu-Ti合金線材の作製~合金組成の影響~

    千星聡, 正橋直哉, 金野泰幸, 髙杉隆幸

    日本銅学会 2018/11/03

  28. 照射によって改質した材料表面層の微細組織観察技術と観察例

    千星聡

    第67回放射線科学研究会 2018/10/26

  29. 高強度-高導電性チタン銅合金線材の開発:合金組成の影響

    千星聡, 金野泰幸, 高杉隆幸

    (独)日本学術振興会「合金状態図172委員会」 合同研究報告会 2018/10/12

  30. Recent study on high-strength and high-electrical conductive Cu alloys International-presentation

    S. Satoshi

    Russia-Japan joint international seminar 2018/10/03

  31. Study on high-strength and high-electrical conductivity Cu-Ti alloy wires International-presentation

    S. Semboshi, Y. Kaneno, A. Iwase, T. Takasugi, Y. Kawahito

    The 3rd International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-3) 2018/09/25

  32. 過時効処理-伸線加工により作製したCu-Ti合金線材の特性に及ぼす組成の影響

    千星聡, 門井祐輔, 正橋直哉, 金野泰幸, 高杉隆幸

    日本金属学会 2018/09/19

  33. 高強度-高導電性チタン銅合金線材の開発:最適な熱加工プロセスの検討

    千星聡, 金野泰幸, 高杉隆幸

    (独)日本学術振興会「合金状態図172委員会」 合同研究報告会 2018/04/20

  34. レーザ照射によるNi基二重複相合金の組織制御

    千星聡, 川人洋介, 金野泰幸, 高杉隆幸

    学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト 第二回公開討論会 2018/03/30

  35. ピーク時効、過時効処理したCu-Ti合金の伸線加工にともなう特性および組織の変化

    千星聡, 正橋直哉, 岩瀬彰宏, 高杉隆幸

    日本金属学会 2018/03/19

  36. 高強度-高導電性Cu-Ti合金線材の作製

    千星聡, 岩瀬彰宏, 高杉隆幸, 中吉勲, 清水敏明

    日本銅学会 2017/11/18

  37. 水素中時効によるCu-Ti合金中不連続析出物生成の抑制

    千星聡, 岩瀬彰宏, 高杉隆幸, 兵藤宏, 須田久

    日本銅学会 2017/11/18

  38. Vを添加したNi3Al合金の時効処理にともなう組織および強度の変化

    千星聡, 佐々木亮介, 金野泰幸, 岩瀬彰宏, 高杉隆幸

    (独)日本学術振興会「合金状態図172委員会」 合同研究報告会 2017/10/20

  39. Relationship between the composition and thermal conductivity for Ni3Al-Ni3V dual two-phase intermetallic alloys International-presentation

    International Conference on Materials and Systems for Sustainability (ICMaSS2017) & The 2nd International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-2) 2017/09/29

  40. 抽出分離を利用した時効析出型Cu-Ni-Si合金の組織解析

    千星聡, 石黒三岐雄, 正橋直哉, 岩瀬彰宏, 高杉隆幸

    日本金属学会 2017/09/16

  41. 高強度-高導電性チタン銅合金の開発のための基盤研究

    千星聡, 須田久, 菅原章

    H29年度全国鉱山・製錬所現場担当者会議(新素材部門) 2017/06/14

  42. 水素を利用した時効析出型Cu-Ti合金の組織制御

    千星聡, 高杉隆幸, 岩瀬彰宏, 須田久

    (独)日本学術振興会「合金状態図172委員会」 2017/04/20

  43. 水素を利用したチタン銅合金の組織・特性制御

    千星 聡

    学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト 第一回公開討論会 2017/03/30

  44. 水素によるCu-Ti合金中不連続析出物生成の抑制

    千星聡, 岩瀬彰宏, 高杉隆幸, 須田久

    日本金属学会 2017/03/15

  45. Influence of microstructure and composition on thermal conductivity for Ni-Ni3V–Ni3Al pseudo ternary system International-presentation

    S. Semboshi, T. Takeuchi, Y. Kaneno, A. Iwase, T. Takasugi

    2016 MRS Fall Meeting 2016/11/27

  46. 時効析出型チタン銅合金における不連続析出物生成と結晶粒界性格との関係

    千星聡, 佐藤充孝, 金野泰幸, 岩瀬彰宏, 高杉隆幸, 須田久

    日本銅学会 2016/10/29

  47. Age-hardenable Cu-Ti alloys prepared by hydrogen process –Microstructural evolution of Cu-Ti alloys aged in a hydrogen atmosphere- International-presentation

    S. Semboshi, A. Iwase, Y. Kaneno, T. Takasugi

    The 1st International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-1) 2016/10/17

  48. V添加したNi3Al合金における時効析出・硬化現象

    佐々木亮介, 千星聡, 長迫実, 岩瀬彰宏, 金野泰幸, 高杉隆幸

    日本金属学会 2016/09/21

  49. 抽出分離を利用した時効析出型銅合金の定量的組織解析

    千星聡, 石黒三岐雄, 佐藤成男, 岩瀬彰宏, 高杉隆幸

    日本鉄鋼協会 2016/09/21

  50. Grain boundary character dependence on initiation of discontinuous precipitation for age-hardenable Cu-Ti alloys International-presentation

    S. Semboshi, M. Sato, Y. Kaneno, T. Takasugi, A. Iwase

    The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 9) 2016/08/01

  51. Quantitative microstructural analysis for age-hardenable Cu-based alloys using extraction technique International-presentation

    S. Semboshi, S. Sato, A. Iwase

    THERMEC’2016 (International Conference on Processing and Manufacturing of Advanced Materials) 2016/05/29

  52. Cu-Ni-Si合金における不連続析出物の生成挙動

    千星聡, 岩瀬彰宏

    日本金属学会 2016/03/23

  53. 複合電析法を利用したセラミックス粒子分散強化型銅材料の開発

    千星聡, 正橋直哉, 岩瀬彰宏

    日本銅学会 2015/11/02

  54. 抽出分離法を利用した時効析出型Cu-Ti合金の組織解析

    千星聡, 石黒三岐雄, 佐藤成男, 岩瀬彰宏, 高杉隆幸

    (独)日本学術振興会「合金状態図172委員会」 2015/10/23

  55. 単結晶、多結晶Cu-Ti合金における時効析出挙動の比較

    千星聡, 岩瀬彰宏

    日本金属学会 2015/09/16

  56. 表面

    千星聡, 岩瀬彰宏, 辻宣佳

    日本金属学会 2015/03/18

    More details Close

    プラズマ浸炭によるCu-Ti希薄合金の表面改質

  57. Intermetallics International-presentation

    S. Semboshi, H. Tsuda, Y. Kaneno, A. Iwase, T. Takasugi

    2014 MRS Fall Meeting 2014/12/01

  58. 熱処理

    千星聡, 岩瀬彰宏, 高維林, 木村崇, 菅原章

    日本銅学会 2014/11/08

    More details Close

    プラズマ窒化によるCu-Ti希薄合金の表面硬化

  59. 銅・銅合金

    千星聡, 正橋直哉, 井上博之, 岩瀬彰宏, 阪本康弘

    日本金属学会 2014/09/24

    More details Close

    電析法を利用した硬質ナノ粒子分散強化型銅複合材料の作製

  60. プラズマ窒化によるCu-Ti希薄合金の表面改質

    千星聡, 岩瀬彰宏, 大津直史, 辻宣佳

    日本金属学会 2014/03/21

  61. Evaluation of precipitates behavior in age-hardenable Cu-Ti alloys using extraction procedure International-presentation

    S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, A. Iwase, W.L. Gao, A. Sugawara

    THERMEC’2013 2013/12/01

  62. Cu-Ti希薄合金における時効析出物の抽出分離による解析

    千星聡, 石黒三岐雄, 佐藤成男, 我妻和明, 高杉隆幸

    日本金属学会2013年春期(第151回)大会 2013/03/27

  63. Improvement of mechanical and electrical properties for age-hardenable Cu-Ti dilute alloys by hydrogenation process International-presentation

    S. Semboshi, T. Takasugi

    2012 MRS fall meeting 2012/11/26

  64. 抽出分離法を利用したCu-Ti合金中時効析出物の構造・組成解析

    千星聡, 石黒三岐雄, 佐藤成男, 我妻和明, 高維林, 菅原章

    日本銅学会講演大会(第52回) 2012/11/03

  65. Fabrication of high-strength and high-conductivity Cu-Ti alloy wire by aging in a hydrogen atmosphere International-presentation

    S. Semboshi, T. Takasugi

    MH2012 (International Symposium on Metal-Hydrogen Systems 2012) 2012/10/22

  66. 時効析出型Cu-Ti合金中析出物の抽出分離

    千星聡, 石黒三岐雄, 佐藤成男, 我妻和明, 高杉隆幸

    日本金属学会2012年秋期(第150回)大会 2012/09/17

  67. 線引加工-水素中時効したチタン銅合金線材の強度および導電性

    千星聡, 折茂慎一

    日本金属学会2012年春期(第149回)大会 2012/03/28

  68. Microstructure, strength and electrical conductivity of Cu-Ti alloys heavily cold-rolled and aged in a hydrogen atmosphere International-presentation

    S. Semboshi, S. Orimo

    International Conference on Progressing & Manufacturing of Advanced Materials (THERMEC'2011) 2011/08/01

  69. 水素中時効したチタン銅合金の微細組織観察

    千星聡, 折茂慎一

    材料における水素有効利用研究会 2010/12/09

  70. 水素を利用した高強度・高導電性チタン銅合金の開発

    千星聡, 折茂慎一, 沼倉宏

    水素エネルギー協会 2010/12/06

  71. 水素中で時効したCu-Ti合金の強度、導電率に及ぼす予ひずみの影響

    千星聡, 折茂慎一, 須田久, 鈴木基彦, 高維林, 菅原章

    第50回 銅及び銅合金技術研究会講演大会 2010/11/04

  72. Effect of prior cold-working on strength and electrical conductivity of Cu-Ti dilute alloy aged in a hydrogen atmosphere International-presentation

    S. Semboshi, H. Numakura, W.-L. Gao, H. Suda, A. Sugawara

    PRICM7 Final Program The Seventh Pacific Rim International Conference on Advanced Materials and Processing 2010/08/02

  73. 冷間圧延-水素中時効したCu-Ti希薄合金の力学的・電気的特性

    千星聡, 近藤晃明, 沼倉宏, 高維林, 須田久, 菅原章

    日本金属学会2010年春期(第146回)大会 2010/03/28

  74. 水素雰囲気中時効Cu-3 at.% Ti合金の硬さ、導電率および組織へ及ぼす水素圧力の影響

    千星聡, 西田智哉, 沼倉宏

    銅及び銅合金技術研究会 2009/11/11

  75. 種々の水素圧力下で時効したCu-3 at.% Ti合金の硬さ、導電率および組織

    千星聡, 西田智哉, 沼倉宏

    日本金属学会2009年春期(第144回)大会 2009/03/28

  76. 水素雰囲気中で時効したCu-Ti希薄合金の組織とそれが及ぼす硬さ、導電率への影響

    千星聡, 西田智哉, 沼倉宏, Talaat Al-Kassab, Reiner Kirchheim

    銅及び銅合金技術研究会 2008/11/23

  77. Microstructure of Cu-3 at.% Ti alloy aged in a hydrogen atmosphere and its relation with electrical and mechanical properties International-presentation

    S. Semboshi, T. Nishida, H. Numakura, T. Al-Kassab, R. Kirchheim

    Material Science and Technology 2008 Conference (MS&T’08) 2008/10/05

  78. Nb/Nb2N二相合金を陽極酸化基板とした固体電解コンデンサの作製と評価

    千星聡, 岩下和史, 大津直史, 佐藤和久

    日本金属学会2008年秋期(第143回)大会 2008/09/23

  79. Nanostructural evaluation of Cu– 1at.% Ti alloy aged in a deuterium atmosphere by means of FIM and TAP methods International-presentation

    S. Semboshi, R. Gemma, T. Al-Kassab, R. Kirchheim

    The 51st International Field Emission Symposium (51st IFES) 2008/06/29

  80. Microstructure and electrical conductivity of Cu-Ti alloys aged in hydrogen atmosphere International-presentation

    S. Semboshi, R. Gemma, T. Al-Kassab, A. Pundt, R. Kirchheim

    Deutsche Physilalische Gesellschaft e.V. (DPG) 2008/02/27

  81. 水素雰囲気中での時効熱処理によるCu-Ti合金の微細組織変化

    千星聡, 今野豊彦

    日本金属学会2007年春期(第140回)大会 2007/03/27

  82. 水素雰囲気中での時効熱処理によるCu-Ti合金の高強度化および高導電率化

    千星聡, 今野豊彦

    日本金属学会2007年春期(第140回)大会 2007/03/27

  83. Powder fabrication of Nb-Ti alloys using hydrogenation process International-presentation

    S. Semboshi, T.J. Konno, N. Masahashi, S. Hanada

    2006 Powder Metallurgy World Congress & Exhibition 2006/09/24

  84. 超弾性効果を有するTi-Nb-Sn合金の温度変化にともなう微視組織のその場観察

    千星聡, 白井隆寛, 松本洋明, 今野豊彦, 正橋直哉, 花田修治

    日本金属学会2006年秋期(第139回)大会 2006/09/16

  85. Fracture behaviors of niobium alloys by hydrogenation and its application for fine powder fabrication International-presentation

    S. Semboshi, T.J. Konno, N. Masahashi, S. Hanada

    THERMEC’2006 2006/07/04

  86. 水素化処理による粉末化現象を利用したNb-Ti合金の微細粉末作製

    千星聡, 正橋直哉, 今野豊彦, 花田修治

    日本金属学会2006年春期(第138回)大会 2006/03/21

  87. 新規Nb合金型固体電解コンデンサーの開発

    千星聡, 坂東宏一, 沈 用球, 大津直史, 今野豊彦

    材料化学研究会・鉄鋼プロセス研究会 2005/12/16

  88. 水素化処理-低温粉砕-脱水素化処理による微細Nb-Ti合金粉末の創製

    千星聡, 正橋直哉, 今野豊彦, 花田修治

    粉体粉末冶金協会平成16年秋季大会 2005/11/16

  89. HIP処理Fe-Al/Fe-Cr-Mo拡散接合材の微細組織観察

    千星聡, 正橋直哉, 今野豊彦, 花田修治

    日本金属学会2004年秋期(第137回)大会 2005/09/28

  90. Fracture behavior and microstructural changes of niobium aloys by hydrogenation International-presentation

    S. Semboshi, T.J. Konno, N. Masahashi, S. Hanada

    2004 ASM Material Solution Conference 2004/12/03

  91. The fracture behavior and microstructural changes of tantalum by hydrogenation International-presentation

    S. Semboshi, T.J. Konno, N. Masahashi, S. Hanada

    International Conference on New Frontiers of Process Science and Engineering in Advanced Materials (PSEA’04) 2004/11/24

  92. 水素吸収にともなうNbの破壊挙動および組織変化

    千星聡, 正橋直哉, 今野豊彦, 花田修治

    日本金属学会2004年秋期(第135回)大会 2004/09/28

  93. 水素吸収にともなうTa水素化合物の形成機構

    千星聡, 正橋直哉, 今野豊彦, 花田修治

    日本金属学会2004年春期(第134回)大会 2004/03/30

  94. 水素処理プロセスを利用した固体電解コンデンサー用粉末の作製と開発

    千星聡, 正橋直哉, 今野豊彦, 花田修治

    日本鉄鋼協会・日本金属学会関西支部材料開発研究会 2004/01/30

    More details Close

    研究発表優秀賞 受賞

  95. 水素処理による微細Nb粉末の作製

    千星聡, 正橋直哉, 花田修治, 今野豊彦

    粉体粉末冶金協会 平成15年秋季大会 2003/11/16

  96. Effect of composition and microstructure on hydrogen absorbing properties in binary TiMn2 based alloys International-presentation

    S. Semboshi, N. Masahashi, T.J. Konno, M. Sakurai, S. Hanada

    2003 ASM Material Solution Conference 2003/10/13

  97. TiMn2 ラーベス相合金の水素吸収特性に及ぼす急冷の影響

    千星聡, 正橋直哉, 花田修治

    日本金属学会2003年春期(第132回)大会 2003/03/27

  98. 水素処理によるTa 粉末の作製

    千星聡, 正橋直哉, 花田修治

    粉体粉末冶金協会 平成14年秋季大会 2002/11/14

  99. 水素処理によるTaの組織変化

    千星聡, 正橋直哉, 花田修治

    日本金属学会2002年秋期(第131回)大会 2002/11/02

  100. 水素処理にともなうTaの破壊機構

    千星聡, 正橋直哉, 花田修治

    日本金属学会2002年春期(第130回)大会 2002/03/27

  101. 水素処理にともなうTaの破壊挙動および組織変化 (1)水素処理条件の依存性

    千星聡, 正橋直哉, 花田修治

    日本金属学会2001年秋期(第129回)大会 2001/09/22

  102. TiMn2ラーベス相合金の水素吸収特性に及ぼす組成の影響

    千星聡, 正橋直哉, 花田修治

    日本金属学会2001年秋期(第129回)大会 2001/09/22

  103. 水素処理によるTaの粉末化および構造変化

    千星聡, 正橋直哉, 花田修治

    日本金属学会2001年春期(第128回)大会 2001/03/27

  104. Hydrogen pulverization in intermetallics–based alloys International-presentation

    S. Semboshi, N. Masahashi, S. Hanada

    MRS (Materials Research Society) 2000/11/22

  105. Ta固溶体/Ta2Ni 二相合金の水素処理にともなう粉末化

    千星聡, 正橋直哉, 花田修治

    日本金属学会2000年秋期(第127回)大会 2000/10/01

  106. 水素処理により微粉末化した金属間化合物の高分解能電顕観察

    千星聡, 正橋直哉, 花田修治

    日本金属学会2000年春期(第126回)大会 2000/03/29

  107. 水素吸収したTiMn2ラーベス相合金の微細組織

    千星聡, 正橋直哉, 花田修治

    日本金属学会1999年秋期(第125回)大会 1999/11/20

  108. 水素吸収にともなうTiMn2ラーベス相合金の微細組織構造の変化

    千星聡, 花田修治

    鉄鋼協会フォーラム 1999/08/26

  109. TiMn2基合金の水素吸収に伴う粉末化

    千星聡, 細田秀樹, 花田修治

    日本金属学会1999年春期(第124回)大会 1999/03/26

  110. 水素処理によるNb3Al基合金の微分化機構

    千星聡, 花田修治

    日本金属学会1996年秋期(第119回)大会 1996/09/28

Show all Show first 5

Industrial Property Rights 15

  1. チタン銅合金線材およびチタン銅合金線材の製造方法

    中吉 勲, 清水 敏明, 千星 聡

    特許第6688654号

    Property Type: Patent

    Holder: 千星聡,中吉勲,清水敏明

  2. Cu−Ti系銅合金板材および製造方法並びに通電部品およびばね材

    千星 聡, 木村 崇, 高 維林, 佐々木 史明, 菅原 章

    特許第6573460号

    Property Type: Patent

  3. 表面被覆が形成されたチタン銅合金材及びその製造方法

    千星 聡, 高 維林

    特許第6485859号

    Property Type: Patent

  4. 分散強化銅含有材料の製造方法

    井上 明子, 桑原 鉄也, 中井 由弘, 千星 聡, 正橋 直哉

    特許第6408309号

    Property Type: Patent

  5. Cu-Ti系合金および製造方法

    千星聡, 高維林, 須田久

    特許第6185799号

    Property Type: Patent

  6. 銅-チタン-水素合金およびその製造法

    千星 聡, 高 維林

    特許第6085146号

    Property Type: Patent

  7. 表面被覆が形成されたCu-Ti合金および製造方法

    千星聡, 高維林

    Property Type: Patent

  8. 銅-チタン-水素合金およびその製造法

    千星 聡, 高維林, 須田久, 菅原章, 鈴木基彦

    特許第5587646号

    Property Type: Patent

  9. 銅-チタン-水素合金とその製造方法

    千星聡

    特許第5001050号

    Property Type: Patent

    More details Close

    国内優先権記事:特許 2006-226225 主張日(平18.8.23) 出願細項目記事:査定種別(査定無し)

  10. 可視光応答性ルチル型二酸化チタン光触媒

    正橋直哉, 水越克彰, 大津直史, 千星聡

    特許第5515030号

    Property Type: Patent

  11. ルチル型二酸化チタン光触媒

    正橋直哉, 水越克彰, 大津直史, 松田優, 千星聡

    特許第5584923号

    Property Type: Patent

    More details Close

    国内優先権記事:特許 2008-168142 主張日(平20.6.27) 出願細項目記事:査定種別(査定無し)

  12. 超音波照射陽極酸化法による二酸化チタン製造法

    正橋直哉, 水越克彰, 大津直史, 千星聡

    特許第5463502号

    Property Type: Patent

    More details Close

    出願細項目記事:査定種別(査定無し)

  13. 陽極酸化法により製造した二酸化チタン

    正橋直哉, 水越克彰, 大津直史, 千星聡

    特許第5141310号

    Property Type: Patent

    More details Close

    出願細項目記事:査定種別(査定無し)

  14. NbまたはTaを主成分とする金属粉末の製造方法

    千星聡

    Property Type: Patent

    More details Close

    出願細項目記事:査定種別(査定無し) 最終処分(未審査請求によるみなし取下) 最終処分日(平21.1.27)

  15. 電解コンデンサ用金属材料

    千星聡, 吉田勝洋

    Property Type: Patent

    More details Close

    出願細項目記事:査定種別(査定無し) 最終処分(未審査請求によるみなし取下) 最終処分日(平20.12.22)

Show all Show first 5

Research Projects 17

  1. 新規反強磁性型ハーフメタル物質の創製と物質設計指針の確立

    梅津 理恵, 千星 聡, 福島 鉄也, 吉年 規治, 赤井 久純

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業 基盤研究(A)

    Category: 基盤研究(A)

    Institution: 東北大学

    2022/04/01 - 2026/03/31

  2. Basic research to develop fiber-reinforced double-phase alloys with lightweight and high-electrical conductivity

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    Category: Grant-in-Aid for Scientific Research (B)

    Institution: Tohoku University

    2022/04/01 - 2026/03/31

  3. 新規高強度-高導電性銅合金群創製のための指導原理

    千星 聡

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業 基盤研究(B)

    Category: 基盤研究(B)

    Institution: 東北大学

    2018/04/01 - 2023/03/31

    More details Close

    小型電子機器用の通電接点部材には高強度-高導電性の銅合金が利用され,更に高性能な銅合金の開発が求められている.当研究グループでは,時効硬化型Cu-Ti合金において過度に時効した試料(過時効材)を伸線加工することで,強度と導電率の双方で従来のピーク時効-伸線加工Cu-Ti合金線材を上回ることが見出した.これは,過時効処理に伴い発達するセル状Cu/Cu4Ti積層組織を活用したものである. 上記の研究成果を踏まえて,昨2018年度~今2019年度では,過時効処理-強加工(伸線加工)プロセスにともなう銅合金の組織変化と特性向上の機構を解明し,従来材の強度-導電性バランスを凌駕する銅合金線材/薄板材を創製するための幾つかの指針を獲得したことが主な研究成果となる. 具体的には,Ti組成を2.5~4.5 at.%と変化させた試料を作製し,これを過時効することによりセル状組織内の不連続析出物の体積分率を制御したCu-Ti合金棒材を準備した.これを伸線加工プロセスに供し,強度・導電性の変化だけでなく,組織形態の変化を回折法,電子顕微鏡観察法だけでなく,抽出分離法により定性的かつ定量的に評価した.その結果,過時効-伸線加工により作製したCu-(2.5~4.5)at.%Ti合金の線材はいずれも,従来材(ピーク時効-伸線加工材)よりも優れた強度-導電性バランスを示した.また,過時効-伸線加工プロセスによる線材の強度向上率は,セル状組織中の不連続析出物相(Cu4Ti)の体積分率と強い相関があることが明らかになった.つまり,強化機構としては,不連続析出物相が伸線加工により板状からナノファイバー状へ形態変化することによる繊維強化機構で凡そ説明付けられた.また,線材の導電率は,銅固溶体母相のTi固溶量で説明できた.

  4. Study on titanium dioxide with environmental purification and biocompatibility

    Masahashi Naoya, MIZUKOSHI YOSHITERU, SEMBOSHI SATOSHI

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    Category: Grant-in-Aid for Scientific Research (B)

    Institution: Tohoku University

    2015/04/01 - 2019/03/31

    More details Close

    In order to impart osteoconductivity to a low Young's modulus TiNbSn alloy which suppresses stress shielding, anodic oxidation was applied in a sulfuric acid electrolyte under high voltage application. The crystallinity of the titanium oxide formed on the surface was controlled under the electrolytic conditions, and the osteoconductivity was confirmed in the TiNbSn alloy with high crystallinity TiO2. The pull-out strength of anodized TiNbSn alloy increased significantly as compared with the untreated material after in vivo test, and it was considered that the adhesion with the TiNbSn alloy was strengthened by the new bone tissue formed on the TiO2. TEM-EDX analysis after in vitro test confirmed the penetration of large amounts of Ca and P into porous TiO2, and proposed a model that osteoconductivity is attributed to the bioactive TiO2 loading and penetration of bone constituent elements into porous TiO2.

  5. Alloy design and microstrucutre contol for high-performance Ni-base intermetallic alloys

    Kaneno Yasuyuki, TAKASUGI Takayuki, SEMBOSHI Satoshi, YAMAGUCHI Takuto, HAGISAWA Takehito

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    Category: Grant-in-Aid for Scientific Research (B)

    Institution: Osaka Prefecture University

    2014/04/01 - 2017/03/31

    More details Close

    The Ni3(Si,Ti) intermetallic alloys with an L12 crystal structure and the dual two-phase Ni3Al (L12) / Ni3V (D022) intermetallic alloys show excellent strength and hardness properties at elevated temperatures compared with the conventional Ni-base superalloys. To further improve the mechanical properties of these Ni-base intermetallic alloys, it is necessary to acquire knowledge about alloy design and microstructure control. In this study, the effects of addition of alloying elements on microstructure and mechanical properties of the Ni3(Si,Ti) and the dual two-phase Ni3Al-Ni3V intermetallic alloys were investigated. Also, the laser metal deposition method was applied to fabricate the cladding layer with the dual two-phase Ni3Al-Ni3V micorstructure.

  6. Quantitative analysis of precipitation behavior for age-hardenable Copper-based alloys using extraction procedure

    Semboshi Satoshi, SATO SHIGEO

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)

    Category: Grant-in-Aid for Scientific Research (C)

    Institution: Tohoku University

    2014/04/01 - 2017/03/31

    More details Close

    It is important to understand variations of the morphology, structure, volume fraction, and composition of precipitates in age-hardenable copper alloys during aging, because their mechanical and physical properties are critically influenced by the precipitation behavior. In this study, extraction procedure has been employed to quantitatively evaluate the precipitation behavior of age-hardening copper alloys, such as Cu-Ti, Cu-Ni-Si, and Cu-Mg-P systems. When the alloys were submerged in an acid solution, only the Cu solid solution matrix was dissolved chemically, but both precipitates remained as insoluble residue. Subsequent structural and compositional analyses of the insoluble residue reveal the fraction and composition of the precipitates, together with those of the matrix. Therefore, we obtained refined microstructural information, and proposed the time-temperature-transformation diagram and revised phase diagram for some age-hardenable copper alloys.

  7. Development of high tensile strength and high electrical conductivity hydride Cu-Ti alloy wire for non-destructive 100 T

    NARUMI Yasuo, SEMBOSHI Satoshi

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Challenging Exploratory Research

    Category: Grant-in-Aid for Challenging Exploratory Research

    Institution: Tohoku University

    2012/04/01 - 2015/03/31

    More details Close

    High tensile strength and high electrical conductivity Cu-Ti alloy wire has been developed to produce magnetic fields of 100 T using a non-destructive pulse magnet. From a vacuum melted ingot with composition of Cu-3.2wt%Ti, Cu-Ti wire with a cross section of 2mm×3mm has been obtained by a cold draw bench. Moreover, in order to recover fracture toughness and electrical conductivity, additional 2 stages heat treatments using a salt bath were applied to the wire. As a result, specifications of Vickers hardness Hv310 and the conductivity of 17%IACS have been achieved. The hardness is higher than that of a standard Cu-Ag alloy wire for practical use. Utility of the new Cu-Ti alloy wire will be examined by forming a pulse magnet coil.

  8. Improvement of strength and conductivity for Cu-Ti alloys aged in a hydrogen atmosphere

    SEMBOSHI Satoshi, SATO Shigeo

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (A)

    Category: Grant-in-Aid for Young Scientists (A)

    Institution: Tohoku University

    2011/11/18 - 2014/03/31

    More details Close

    We attempted to prepare Cu-Ti based alloys with a high strength and a high electrical conductivity by hydrogenation procedures. The electrical conductivity of Cu-Ti alloys was significantly improved without degradation of the mechanical properties by aging in a hydrogen atmosphere. The strengthening was primarily due to fine dispersion of needle-shaped Cu4Ti precipitates, which was similar with the case of conventional aging in vacuum. The enhancement of the conductivity was due to a reduction of a concentration of solute Ti in the matrix phase, which was caused by co-precipitation of Cu4Ti and TiH2. The balance of the strength and conductivity was improved by aging under a higher hydrogen pressure at a low temperature. Prior-deformation before aging was also useful to improve the properties. Eventually, we demonstrated that optimizing the thermomechanical process conditions imparted an excellent balance of strength and conductivity, of more than 950 MPa and 25% IACS, respectively.

  9. Atomic, Surface Structure and Hydrogen Storage Function of Aluminum-based Hydrides

    IKEDA KAZUTAKA, FUJISAKI Fumika, OHSHITA Hidetoshi, KITAJIMA Yoshinori, ABE Hitoshi, OTOMO Toshiya, SUZUYA Kentaro, SATO Toyoto, MATSUO Motoaki, SEMBOSHI Satoshi, LI Hai-wen, ORIMO Shin-ichi, ICHIKAWA Takayuki, KOJIMA Yoshitsugu, TATSUMI Kazuyoshi, MUTO Shunsuke

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (A)

    Category: Grant-in-Aid for Young Scientists (A)

    Institution: High Energy Accelerator Research Organization

    2011/04/01 - 2014/03/31

    More details Close

    Atomic, Surface Structure and Hydrogen Storage Function of Aluminum-based Hydrides were studied. We investigated the ether desorption steps for AlH3 synthesis by Pair Distribution Function analysis. Differences of the electric structure for phases in the reversible hydrogen absorption and desorption reactions of NaAlH4 were analyzed. Local structural changes that accompany amorphization during the decomposition of LiAl(NH2)4 were investigated.

  10. Functional advancement of complex hydrides as solid electrolyte and development of new electrode materials for lithium-ion batteries

    MATSUO Motoaki, OGUCHI Hiroyuki, SATO Toyoto, SEMBOSHI Satoshi, IKESHOJI Tamio, MAEKAWA Hideki, TAKAMURA Hitoshi, ORIMO Shin-ichi, IKEDA Kazutaka, OHTOMO Toshiya, LI Hai-wen

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B)

    Category: Grant-in-Aid for Young Scientists (B)

    Institution: Tohoku University

    2010 - 2011

    More details Close

    We have worked on the functional advancement of complex hydrides as solid electrolyte and development of new electrode materials for lithium-ion batteries. It was found that the ion substitution for Li+ and [BH4]. complex anion is effective to improve the ionic conductivity of LiBH4. As a result, we succeeded in synthesizing new complex hydrides such as Li_3N_2IH_4 and Na_2BNH_6 with fast ionic conductivities. We also confirmed the lithium deintercalation of Li_xBC, a potential candidate for high-capacity electrode materials, from x=1 to x approximate to 0. 5.

  11. Quantitative analysis of crystalline defects that control anomalous properties of severely-deformed metals and investigation of their thermal stability

    NUMAKURA Hiroshi, SEMBOSHI Satoshi, TSUJI Nobuhiro, TERADA Daisuke

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

    Category: Grant-in-Aid for Scientific Research (B)

    Institution: Osaka Prefecture University

    2009 - 2011

    More details Close

    Severely cold-worked metals by special shape-invariant deformation techniques exhibit such interesting mechanical properties as unusual strength and super-plasticity. In the present research, we have studied the type and the density of the defects introduced by the deformation and their thermal stability by various techniques such as measurements of electrical resistivity and dynamic elastic modulus. It has been found that the size of crystal grains is reduced less efficiently in materials of higher purity, indicating that impurities are advantageous for preparing ultra-fine-grained metals. It also turned out that impurities contribute to the thermal stability of the defects and the fine-grained microstructure.

  12. Functional Advancement of Aluminum-based Hydrogen Storage Materials-Elucidation and Promotion of Reaction Mechanism

    IKEDA Kazutaka, OHSHITA Hidetoshi, OTOMO Toshiya, SUZUYA Kentaro, MUTO Shunsuke, YUKAWA Hiroshi, SATO Toyoto, SEMBOSHI Satoshi, LI Hai-Wen, OHOYAMA Kenji, ORIMO Shin-ichi

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B)

    Category: Grant-in-Aid for Young Scientists (B)

    2009 - 2010

    More details Close

    Functional advancement of aluminum-based hydrogen storage materials was studied. Synthesis conditions of aluminum hydrides, AlH_3, were optimized, and the crystal and surface structures, the thermodynamic stabilities, the hydrogen desorption properties and their correlations were investigated. We confirmed that the presence of amorphous Al_2O_3 andχ-Al_2O_3 on the surface may prevent the hydrogen desorption reaction of AlH_3, which can be promoted by milling process under the atmosphere control.

  13. Study of superelastic biomaterials with antimicrobial activities

    MASAHASHI Naoya, OKU Masayoshi, MATSUMOTO Hiroaki, HANADA Shuji, SEMBOSHI Satoshi, MIZUKOSHI Yoshiteru, OHTSU Naofumi

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (A)

    Category: Grant-in-Aid for Scientific Research (A)

    Institution: Tohoku University

    2005 - 2008

  14. 金属ガラスの過冷却状態からの結晶化のその場電子顕微鏡観察

    今野 豊彦, 堀 史説, 千星 聡

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業 特定領域研究

    Category: 特定領域研究

    2003 - 2007

    More details Close

    金属ガラスの昇温過程において生じる均一・不均一な変化を高分解能分析電子顕微鏡のその場観察と陽電子消滅による自由体積の変化を観察することで明らかにし、平衡相へ至るまでの変態のシークエンスを熱力学的・速度論的に明らかにすることが本研究の目的である。 試料は傾角鋳造法で作成されたZr_<50>Cu_<40>Al_<10>金属ガラスを用いた。昇温速度40K/secで観測されたTgは約700Kである。この試料を473および673Kで等温保持したときの密度変化ならびに陽電子寿命変化はよい相関を示し、陽電子が自由体積近傍で消滅すること、また構造緩和に伴う自由体積の減少がその寿命に直接影響していることがわかった。またこの温度範囲では焼鈍温度が200Kも異なるにもかかわらずほぼ100sec後に自由体積の減少が起っている。これは内部摩擦法により測定されたこの温度領域における物質移動の活性化エネルギーが0.15eVと非常に低いことに対応している。 一方、結晶化過程に関してはこのようにZr_<50>Cu_<40>Al_<10>金属ガラスの結晶化はスフェルライトと一般に呼ばれる球状の結晶相がCuを掃き出しながら成長することにより起こった。スフェルライトを構成する結晶相は斜方晶系(考えられる空間群:Pc2m,Pcm2_1,Pcmm)であるが、結晶化温度によってモフォロジーが大きく異なり、これは金属ガラス中の原子の易動度を反映しているものと思われる。 さらに熱分析法によりガラス転位に要する活性化エネルギーを測定した。昇温速度を変えることによって求められた活性化エネルギーは5.22eVであり、これはガラス転移には数個の原子が同時に動くことが必要であることを示す。また恒温保持によるエンタルピー緩和量も測定した。緩和のキネティクスを示唆する拡張指数は0.5-0.6の間にあり、これは緩和過程に分布があることを示している。

  15. 新規のNb合金型固体電解コンデンサーの開発

    千星 聡

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業 若手研究(B)

    Category: 若手研究(B)

    Institution: 大阪府立大学

    2005 - 2006

    More details Close

    固体電解コンデンサーはNb基板に誘電体層として陽極酸化皮膜を形成させた構成であり、そのNb基板を適切に合金化することにより誘電特性の優れた新規固体電解コンデンサーが実現すると考える。本研究では優れた性能をもつNb合金型固体電解コンデンサーの開発を目的とし、NbにNを系統的に添加した合金を基板とした試験体を作製し、静電容量(CV値),漏れ電流の測定、および陽極酸化皮膜の構造を評価した。Nb-N合金(N量:0〜17at.%)をアーク溶解法により作製し、真空雰囲気で1673K、6hの均質化熱処理を施した後、15×10×1mm^3の合金片を切り出した。合金表面を化学研磨後、電界浴(リン酸0.6体積%水溶液)中に浸含させ、温度60℃、化成電圧16Vで陽極酸化処理を施し試験体とし、誘電特性を測定した。また、FE-SEM, TEM, AESおよびXPSを用いて陽極酸化皮膜の構造解析を行った。 Nb-1〜17at.%Ti試験体と参照用のNbのみの試験体では、CV値において、基板組成がNb-1〜6at.%Nの範囲ではN含有量にともなってCV値は増加し、Nb-6at.%N合金を陽極酸化材料とした試験体では、Nbのみの試験体よりも40%程度の増大が見られる。ここで、Nb-N合金ではN含有量にともないNb固溶体中の体積分率が減少し、Nb_2N相が増加する。Nb_2N相は陽極酸化処理前の化学研磨によって優先的に腐食され、凹凸となる。また、基板Nb-N合金上の陽極酸化皮膜中にはNb_2O_5に加えてNが存在することが確認できた。よって、N含有量の増加にともなうNb-N合金固体電解コンデンサー試験体での静電容量の増加はNb_2N形成に起因する実効比表面積の増加および陽極酸化皮膜中のN含有に起因すると考える。また、漏れ電流およびバイアス依存性は基板組成がNb-1〜17at.%Nのいずれの試験体でもNbのみの試験体より向上した。これは陽極酸化皮膜中のNの分散が要因であると考える。以上の結果から、Nb-N合金系では、Nb-6at.%Nあたりの組成でCV値、漏れ電流の両方の特性が改善される陽極酸化皮膜が得られることが示された。

  16. 水素処理法による生体用チタン合金の粉末作製および高機能化プロセスの開発

    千星 聡

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業 特別研究員奨励費

    Category: 特別研究員奨励費

    Institution: 東北大学

    2002 - 2004

    More details Close

    申請者らは種々の金属材料が水素雰囲気中に保持することにより自己崩壊的に粉末化する現象を粉末作製プロセスに応用することを提案してきた。本プロセスにより得られる粉末は、粉末粒径が微細となること、不純物濃度の低いこと、低エネルギーかつ低コストであることなどの様々な優位性をもち、生体用TiもしくはTa粉末製造プロセスとして理想的なものの一つと期待できる。本年度では、水素処理を利用した粉末作製プロセスの確立を目指し、種々の水素処理プロセスにともなうTaの破壊挙動、および組織変化を調査する。さらに、得られた結果をもとに水素処理プロセスを利用した微細Ta粉末の作製を試みる。 再結晶等軸粒組織を有するφ5mmx1mmのディスク状Ta試験片(純度99.996%)を4種類の水素処理プロセスに供した。粉末形態および組織変化を調査するため、水素処理後の試料について、光学顕微鏡、走査型電子顕微鏡による観察を行なった。また水素処理前後での構造変化を調べるため、X線回折解析による構造解析を行った。破砕性を評価するために、水素処理粉末をボールミリングに供し、レーザー式粒度分布測定器により粉末粒径を測定した。 水素雰囲気中で1473Kに保持後、室温まで冷却するプロセスではTa試験片に結晶粒界に依存しない円周状のクラックがみとめられる。一方、水素雰囲気中で1473Kで保持後、冷却時の雰囲気をArに置換したプロセスでは組織変化および破壊は起こらないことから、水素雰囲気中での冷却過程でクラックが導入されると考えられる。Taは低温ほど多量の水素を固溶し、334K以下で水素化合物を形成するが、水素化合物を形成させないプロセスでは破壊は起こらない。これから、クラック導入は水素化合物の形成が関与すると考察される。高温保持後の低温保持温度T_Dを変化させたプロセスでは、T_Dが低温ほどクラックの発生頻度が顕著となり、破砕性も向上する。また、Taは低温ほど多量の水素を吸収し、それにともない格子膨張および水素化合物の形成が顕著になる。これらは試料内部にひずみを導入させ、破壊を促進させる。以上より、水素処理プロセスを最適化することにより、Taの自己崩壊性、粉砕性を向上させることが可能となる。水素処理したTaは数分のミリングでサブミクロンオーダーの微細粉末となり、脱水素処理により極めて不純物濃度の低い粉末となる。 水素処理による粉末化現象はTaのみならず、Ti、Nb、およびそれらの合金でも認められる。また粉末化機構もほぼ同様であることを確認した。本年度に得られた知見より、生体用材料として期待されている各種合金の原料粉末を高品質に作製できる可能性が見出された。

  17. 組織制御した金属間化合物基合金の水素吸蔵特性

    千星 聡

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業 特別研究員奨励費

    Category: 特別研究員奨励費

    Institution: 東北大学

    1999 - 2001

Show all Show first 5

Teaching Experience 15

  1. Plastic defoemation processing Shimane University

  2. Practical Metallic Materials Science Shimane University

  3. 材料強度学 Shimane University

  4. 学生実験I Shimane University

  5. マテリアル特殊講義II 大阪府立大学

  6. 基礎学生実験 Shimane University

  7. 応用構造材料学 東北大学

  8. 准教授セミナー 東北大学

  9. 全学教育科目「基礎ゼミ」 東北大学

  10. マテリアル工学実験I 大阪府立大学

  11. 結晶評価学 大阪府立大学

  12. マテリアル工学実験I 大阪府立大学

  13. 環境調和機能材料学 東北大学

  14. マテリアル工学演習 大阪府立大学

  15. マテリアル工学基礎実験 大阪府立大学

Show all Show first 5

Social Activities 5

  1. 加工熱処理を駆使した高強度-高導電性銅合金の創製~金属組織制御の基礎と応用 ~

    技術コミュニティラボ

    2024/05/28 - 2024/05/28

  2. 合同シーズ発表会 ものづくり現場に活用できる研究シーズを見逃すな!

    導電金属材料の仕組みと利用

    2023/02/16 -

  3. 兵庫県立大学「匠の技プロジェクト」

    2016/10/07 - 2016/11/25

    More details Close

    兵庫県下の中小企業の若手および中堅技術者を対象として、金属材料学に関する基礎的内容を講義する

  4. テクノラボツアー ものづくりイノベーション研究所

    2017/03/03 -

    More details Close

    大阪府立大学ものづくりイノベーション研究所と東北大学金属材料研究所附属産学官広域連携センターの研究員による最先端研究成果の紹介

  5. R&Dセミナー 銅および銅合金の基礎

    2016/11/08 -

    More details Close

    銅および銅合金に関する基礎的な講演会

Media Coverage 6

  1. 大阪で「ものづくり基礎講座」

    鉄鋼新聞

    2020/09/09

    Type: Newspaper, magazine

  2. 導電材料で銅、アルミ学ぶ

    日刊産業新聞

    2020/09/09

    Type: Newspaper, magazine

  3. 東北大学金研産学官広域連携センター ホームページを刷新

    鉄鋼新聞

    2019/08/08

    Type: Newspaper, magazine

  4. 大学合同シーズ発表会

    日刊産業新聞

    2018/06/21

    Type: Newspaper, magazine

  5. チタン銅合金線材を共同開発

    日刊産業新聞

    2017/03/17

    Type: Newspaper, magazine

  6. 東北大とトクセン工業 新「チタン銅合金線材」開発

    日刊産業新聞

    2016/09/13

    Type: Newspaper, magazine

Show all Show first 5

Other 18

  1. 光輝アルマイトの開発

    More details Close

    光輝感と耐食性を両立したアルマイト被膜の開発

  2. 複合電析法による硬質ナノ粒子分散強化型複合材料の開発

    More details Close

    複合電析法を利用した硬質ナノ粒子分散強化型複合材料の研究開発を行い、高強度かつ高導電性銅素材の実現の可能性を探る

  3. 高強度-高導電性チタン銅合金線材の開発

    More details Close

    高強度-高導電性チタン銅合金線材の開発

  4. 吸排気バルブシートへの適用可能な高機能銅合金部材の高機能化検討

    More details Close

    バルブシート用銅合金の可能性実験

  5. 高耐久スポット溶接用電極材料の開発

    More details Close

    高耐久スポット溶接用電極材料の開発

  6. エンジン吸排気バルブシートへの適用可能な高機能銅合金部材の開発

    More details Close

    エンジン吸排気バルブシートへの適用可能な高機能銅合金部材の開発

  7. 吸排気バルブシートへの適用可能な高機能銅合金部材の研究

    More details Close

    吸排気バルブシートへの適用可能な高機能銅合金部材の研究

  8. 抽出分離法を用いた時効硬化型銅合金中の析出物相の定性・定量解析

    More details Close

    抽出分離法により時効硬化型銅合金から析出物相を採取し、直接的にX線解析および組成分析等に供する。これにより合金中の析出物の定性・定量解析が高精度で行える。

  9. 高い耐食性を有するめっき鋼板の開発とその開発手法の確立

    More details Close

    簡易で応用性の高いめっき材料の作製手法を確立し、効率的に研究開発するための方策を提案する。

  10. 高性能導体材料開発のための材料組織とその制御方法の検討

    More details Close

    導体材料の可能性試験を行い、高性能化・実用化を検討する

  11. 水素化プロセスによる高強度・高導電率チタン銅合金の設計・評価・応用

    More details Close

    水素化したチタン銅合金の強度、導電性および組織変化を系統的に調査する。得られた知見より高強度かつ高導電性のチタン銅合金を作製し、実用化へ展開する。

  12. 社会環境に調和した導電性銅合金の開発

    More details Close

    環境性、希少性などに問題のあるベリリウム銅合金に代替する銅合金の開発を目指す

  13. Cu-Ti合金の強度-導電率バランスの向上および工業化

    More details Close

    Cu-Ti合金の強度-導電率バランスを向上するための基礎的・実践的研究を行う。

  14. 水素雰囲気中時効処理によるCu-Ti合金の高強度化および高導電率化

    More details Close

    水素雰囲気中時効処理にともなうチタン銅合金の強度および導電性の変化を調査する

  15. 水素雰囲気中時効熱処理による環境調和型導電性Cu合金の開発

    More details Close

    環境性に優れたチタン銅合金の導電性を向上させるため、水素化処理法を提案し、その有効性を調査する。

  16. 微細Nb合金粉末を基板とした超高性能固体電解コンデンサーの開発

    More details Close

    水素化-粉砕法により清浄な微細Nb合金粉末を作製し、その多孔質焼結体を基板とした固体電解コンデンサーを作製する

  17. 新規のNb合金型固体電解コンデンサーの開発

    More details Close

    NbにTi,Zr,Ta,Nなどの種々の元素を適量添加した基板を作製し、その表面上に形成される陽極酸化膜の誘電体特性を調査する。これにより、従来の純Nb基板よりも優れた個体電解コンデンサーの開発を目指す。

  18. 水素処理法による高性能Taコンデンサーの粉末作製および開発

    More details Close

    清浄かつ微細なTa粉末を作製するために、Taに水素化-粉砕法を適応し、その優位性を調査した。

Show all Show first 5