Oxidation and Mechanical Properties of Ultrafine-Grained MoSiBTiC Alloy Produced by Rapid Solidification

Kyosuke Yoshimi, Naoma Abe, Xi Nan, Shuntaro Ida, Takeshi Wada, Hidemi Kato

Advances in Materials Technology for Power Plants　84871　1279-1288　2024/10/15

DOI： 10.31399/asm.cp.am-epri-2024p1279 　

ISSN： 2994-4023

eISSN： 2994-4031

Off-Stoichiometric Effect on Properties of TiC

Hiromu Matsuura, Kotaro Hoshizaki, Shuntaro Ida, Kyosuke Yoshimi

Advances in Materials Technology for Power Plants　84871　662-668　2024/10/15

DOI： 10.31399/asm.cp.am-epri-2024p0662 　

ISSN： 2994-4023

eISSN： 2994-4031

Liquidus surface projection and isothermal section at 1500 °C of (Mo 5Nb)-Ti-C pseudo-ternary system

Xinyu Yan, Xi Nan, Shuntaro Ida, Kyosuke Yoshimi

International Journal of Refractory Metals and Hard Materials　106766-106766　2024/06

DOI： 10.1016/j.ijrmhm.2024.106766 　

ISSN： 0263-4368

Experimental investigations of 9 mol.% Mo5SiB2 isopleth phase diagram in Mo–Mo5SiB2–TiC pseudo-ternary system

Xi Nan, Ryogo Sawada, Haruki Nakashima, Masayoshi Adachi, Makoto Ohtsuka, Kyosuke Yoshimi, Hiroyuki Fukuyama

Materials Today Communications　39　109239-109239　2024/06

DOI： 10.1016/j.mtcomm.2024.109239 　

ISSN： 2352-4928

Precipitation Behavior of M23C6 and Fe2W in 9Cr3W3CoVNbBN Steel during Tempering in the Temperature Range of 500-790°C

Takumi Osanai, Nobuaki Sekido, Mitsuharu Yonemura, Kouichi Maruyama, Kyosuke Yoshimi

ISIJ International　64　(2)　286-294　2024/01/30

DOI： 10.2355/isijinternational.isijint-2023-125 　

ISSN： 0915-1559

eISSN： 1347-5460

Microstructure Development during Creep Deformation of 9Cr-1Mo-V-Nb Steel with Excess Nitrogen Introduced by Solution Nitriding – Multidimensional Scatter Diagram Analysis of STEM-EDS Maps by Machine Learning –

Tomotaka Hatakeyama, Shuntaro Ida, Kota Sawada, Kyosuke Yoshimi

Tetsu-to-Hagane　2024

DOI： 10.2355/tetsutohagane.tetsu-2024-115 　

ISSN： 0021-1575

eISSN： 1883-2954

Influence of Nitrogen Introduced by Solution Nitriding on Microstructure and Room-temperature Mechanical Properties of Grade 91 Steel

Shuntaro Ida, Kyosuke Yoshimi

Tetsu-to-Hagane　2024

DOI： 10.2355/tetsutohagane.tetsu-2024-064 　

ISSN： 0021-1575

eISSN： 1883-2954

Solidification microstructure and mechanical properties of B1-type TiC in Fe-Ti-C ternary alloys

Shuntaro Ida, Kengo Watanabe, Kyosuke Yoshimi

ISIJ International　2024

DOI： 10.2355/isijinternational.isijint-2024-166 　

ISSN： 0915-1559

eISSN： 1347-5460

Site-occupation and structure relaxation behavior of C14-type stoichiometric and iron-rich Fe2Nb Laves phases with addition of aluminum or chromium

Ryosuke Yamagata, Junya Nakamura, Takaomi Itoi, Masao Takeyama, Kyosuke Yoshimi

Materials Characterization　206　113447-113447　2023/12

DOI： 10.1016/j.matchar.2023.113447 　

ISSN： 1044-5803

of off-stoichiometric (Ti, Mo)Cx at room temperature in equilibrium with metal solid solution phase

Shuntaro IDA, Kotaro YONEMURA, Xi NAN, Nobuaki SEKIDO, Eri NAKAGAWA, Takahito OHMURA, Kyosuke YOSHIMI

Report of the R054 Committee on Heat-Resistant Materials for Carbon Neutrality Japan Society for the Promotion of Science　1　(1)　45-54　2023/11

Microstructure Characterization of MoSiBTiC Alloy by Machine Learning

Chihana KUDO, Natalia ZAMBRANO ORTEGA, Xinyu YAN, Kyosuke YOSHIMI

Alloy by Machine Learning", Report of the R054 Committee on Heat-Resistant Materials for Carbon Neutrality Japan Society for the Promotion of Science　1　(1)　55-66　2023/11

Off-stoichiometry and molybdenum substitution effects on elastic moduli of B1-type titanium carbide

Shuntaro Ida, Kotaro Hoshizaki, Takahiro Kaneko, Xi Nan, Nobuaki Sekido, Kyosuke Yoshimi

Scientific Reports　13　(1)　2023/08/21

DOI： 10.1038/s41598-023-40969-x 　

eISSN： 2045-2322

Effect of Al Addition on Thermal Fatigue Deformation Morphology in High Heat-resistant Ferritic Stainless Steel SUS444

Tetsuyuki Nakamura, Kyosuke Yoshimi

Tetsu-to-Hagane　109　(8)　704-714　2023/08

DOI： 10.2355/tetsutohagane.tetsu-2022-125 　

ISSN： 0021-1575

eISSN： 1883-2954

Preparation of high‐strength (Ta,W)C solid‐solutions by spark plasma sintering

Dmytro Demirskyi, Kyosuke Yoshimi, Tohru S. Suzuki, Oleg O. Vasylkiv

International Journal of Applied Ceramic Technology　20　(5)　2747-2759　2023/05

DOI： 10.1111/ijac.14438 　

ISSN： 1546-542X

eISSN： 1744-7402

High-temperature compression tests of Ti(C, N)–70 wt% W cermet and isothermal forging of Inconel 718 alloys using cermet molds

Takashi Murakami, Masahito Katoh, Daisuke Matsukura, Kyosuke Yoshimi

Journal of Materials Research and Technology　24　6578-6587　2023/05

DOI： 10.1016/j.jmrt.2023.04.237 　

ISSN： 2238-7854

Reactive consolidation of tough, deformation resistant tantalum monoboride

D. Demirskyi, K. Yoshimi, T.S. Suzuki, O. Vasylkiv

Scripta Materialia　229　115383-115383　2023/05

DOI： 10.1016/j.scriptamat.2023.115383 　

ISSN： 1359-6462

A simulation of softening during creep exposure of grade 91 steel in a time range over 100,000 h around 600°C

K. Maruyama, R.P. Chen, M. Yaguchi, K. Yoshimi

International Journal of Pressure Vessels and Piping　202　104923-104923　2023/04

DOI： 10.1016/j.ijpvp.2023.104923 　

ISSN： 0308-0161

High-strength, medium entropy Zr-Ta-Nb diboride ceramics

D. Demirskyi, T. Nishimura, K. Yoshimi, O. Vasylkiv

Scripta Materialia　225　115170-115170　2023/03

DOI： 10.1016/j.scriptamat.2022.115170 　

ISSN： 1359-6462

Variations in the elastic properties and lattice parameters of Mo–Ti and Mo–Cr BCC solid solutions, as estimated by DFT calculations

Takahiro Kaneko, Kyosuke Yoshimi

Computational Materials Science　220　112026-112026　2023/03

DOI： 10.1016/j.commatsci.2023.112026 　

ISSN： 0927-0256

Enhanced oxidation resistance of the 1st generation MoSiBTiC alloy by pack cementation and heat treatment

Xi Nan, Kohei Umeda, Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi, John H. Perepezko

Report of the 123rd Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　64　(1)　87-95　2023/03

Microstructural evolution during Low-tempering in a B-Doped Ferritic Heart-Resistant Steel

Nobuaki SEKIDO, Takumi OSANAI, Mitsuharu YONEMURA, Kouichi MARUYAMA, Kyosuke YOSHIMI

Report of the 123rd Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　64　(1)　1-5　2023/03

Solidification Microstructure and Mechanical Properties of B1-type TiC in Fe-Ti-C Ternary Alloys

Shuntaro Ida, Kengo Watanabe, Kyosuke Yoshimi

Tetsu-to-Hagane　109　(3)　224-233　2023

DOI： 10.2355/tetsutohagane.tetsu-2022-118 　

ISSN： 0021-1575

eISSN： 1883-2954

Oxidation behaviour of a MoSiBTiC alloy coated by a (Si+B) co-deposition pack cementation method

Xi Nan, Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi, John H. Perepezko

Corrosion Science　214　110990-110990　2023/01

DOI： 10.1016/j.corsci.2023.110990 　

ISSN： 0010-938X

Influence of Carbides Precipitated by Low-temperature Tempering on the Room-temperature Mechanical Properties of Grade 91 Steel

Kengo Watanabe, Shuntaro Ida, Kyosuke Yoshimi

ISIJ International　62　(11)　2389-2396　2022/11/15

DOI： 10.2355/isijinternational.isijint-2022-213 　

ISSN： 0915-1559

eISSN： 1347-5460

Strength and oxidation resistance of MoSiBTiC alloy with ultra fine microstructure

Naoma ABE, Xi NAN, Shuntaro IDA, Nobuaki SEKIDO, Takeshi WADA, Hidemi KATO, Kyosuke YOSHIMI

Report of the 123rd Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　63　(3)　307-316　2022/11

Evaluation of Elastic Moduli and Fracture Toughness of Off-stoichiometric (Ti, TM)Cx (TM = Zr, Nb, Mo) by First-prinsiple Calculations

Kotaro HOSHIZAKI, Takahiro KANEKO, Shuntaro IDA, Kyosuke YOSHIMI

Report of the 123rd Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　63　(3)　293-305　2022/11

Formulation of creep rupture life of grade 91 steel by a multi-region analysis of multi-heat data

Kouichi MARUYAMA, D. DEWEES, Fujio ABE, Kyosuke YOSHIMI

Report of the 123rd Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　63　(3)　185-195　2022/11

High‐temperature reactive synthesis of the Zr–Ta multiboride with a supercomposite structure

Dmytro Demirskyi, Tohru S. Suzuki, Kyosuke Yoshimi, Oleg Vasylkiv

Journal of the American Ceramic Society　105　(11)　6989-7002　2022/11

DOI： 10.1111/jace.18653 　

ISSN： 0002-7820

eISSN： 1551-2916

Examinations of equations for creep rupture life with a large creep database on grade 91 steel

Kouichi Maruyama, Dave Dewees, Fujio Abe, Kyosuke Yoshimi

International Journal of Pressure Vessels and Piping　199　104738-104738　2022/10

DOI： 10.1016/j.ijpvp.2022.104738 　

ISSN： 0308-0161

ZrSi2の酸化皮膜形成挙動に及ぼす第三元素添加の影響

大関啓吾, 関戸信彰, 吉見享祐

日本金属学会2022年秋期(第171回)講演大会 予稿集　2022/09

急冷凝固法で作製した第１世代MoSiBTiC合金のミクロ組織と材料特性

阿部尚馬, 南茜, 井田駿太郎, 関戸信彰, 和田武, 加藤秀実, 吉見享祐

日本金属学会2022年秋期(第171回)講演大会 予稿集　2022/09

シリサイドコーティングによる第1世代MoSiBTiC合金の耐酸化性の向上

NAN XI, 井田駿太郎, 関戸信彰, 吉見享祐

日本金属学会2022年秋期(第171回)講演大会 予稿集　2022/09

Mo-Ti-C三元系のA2金属相と平衡するB1型TiC相のミクロ組織

井田駿太郎, 南茜, 関戸信彰, 吉見享祐

日本金属学会2022年秋期(第171回)講演大会 予稿集　2022/09

(Mo95Nb5)-Ti-C 擬三元系における凝固過程と相平衡

Yan Xinyu, 南茜, 井田駿太郎, 関戸信彰, 吉見享祐

日本金属学会2022年秋期(第171回)講演大会 予稿集　2022/09

第一原理計算による非化学量論 MCxの表面エネルギーとへき開破壊の異方性評価

星崎 航太朗, 金子 昂弘, 井田 駿太郎, 吉見 享祐

日本セラミックス協会第35回秋季シンポジウム講演予稿集　2022/09

Consolidation and high‐temperature properties of ceramics in the TaC–NbC system

Dmytro Demirskyi, T. Nishimura, T. S. Suzuki, K. Yoshimi, Oleg Vasylkiv

Journal of the American Ceramic Society　105　(12)　7567-7581　2022/07/27

DOI： 10.1111/jace.18660 　

ISSN： 0002-7820

eISSN： 1551-2916

Microstructure and material properties of spark-plasma-sintered compact of MoSiBTiC powder produced by gas atomization II -Alloy and powder making with attention to compositional changes during the process-

Shuntaro IDA, Kohei UMEDA, Xi NAN, Nobuaki SEKIDO, Kyosuke YOSHIMI

63　(2)　167-177　2022/06

Effect of Cu, Mn, Pt, V, and Mo additions on the oxide scale formation behavior of ZrSi2

Keigo OSEKI, Nobuaki SEKIDO, Kyosuke YOSHIMI

Report of the 123rd Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　63　(2)　161-166　2022/06

DFT calculations on BCC-based ordered or disordered Mo-Ti binary alloys

Kaneko T, Yoshimi K

Proceedings of International Conference on Refractory Metals and Hard Materials　2022/05

Microstructure, high-temperature strength and oxidation resistance of spark-plasma sintered compact of gas-atomized MoSiBTiC powder

Yoshimi K, Arai H, Umeda K, Nan X, Ida S, Sekido N

Proceedings of International Conference on Refractory Metals and Hard Materials　2022/05

Reactive consolidation and high-temperature strength of HfB2–SiB6

D. Demirskyi, T. Nishimura, T.S. Suzuki, K. Yoshimi, O. Vasylkiv

Journal of the European Ceramic Society　42　(12)　4783-4792　2022/05

DOI： 10.1016/j.jeurceramsoc.2022.05.004 　

ISSN： 0955-2219

eISSN： 1873-619X

Mechanical responses of additively manufactured MoSiBTiC alloy under tensile and compressive loadings

Tomo Takeda, Weiwei Zhou, Naoyuki Nomura, Kyosuke Yoshimi

Materials Science and Engineering: A　839　142848-142848　2022/04

DOI： 10.1016/j.msea.2022.142848 　

ISSN： 0921-5093

MoSiBTiC合金急冷凝固体のミクロ組織と材料特性

阿部尚馬, 南茜, 井田駿太郎, 関戸信彰, 吉見享祐

日本金属学会2022年春期(第170回)講演大会 予稿集　2022/03

ZrSi2の酸化挙動に及ぼす第三元素添加の影響

大関啓吾, 吉見享祐

日本金属学会2022年春期(第170回)講演大会 予稿集　2022/03

MoSiBZrC合金のミクロ組織と高温酸化挙動に及ぼすCrとNb添加の効果

Yan Xinyu, 南茜, 井田駿太郎, 吉見享祐

日本金属学会2022年春期(第170回)講演大会 予稿集　2022/03

シリサイドコーティングによるMoSiBTiC 合金耐酸化性の向上

南茜, 井田駿太郎, 関戸信彰, 吉見享祐

日本金属学会2022年春期(第170回)講演大会 予稿集　2022/03

Mo-Ti BCC 固溶体の耐酸化性に及ぼすAl, Si添加の効果

金子昂弘, 石田和也, 南茜, 井田駿太郎, 関戸信彰, 吉見享祐

日本金属学会2022年春期(第170回)講演大会 予稿集　2022/03

Mo-Ti-C 三元系における TiC の非化学量論性に伴う弾性率変化

井田 駿太郎, 星崎 航太朗, 金子 昂弘, 南 茜, 関戸信彰, 吉見 享祐

日本セラミックス協会2022年年会講演予稿集　2022/03

M-Ti-C 三元系 MX セラミックスの非化学量論性と弾性率に関する第一原理計算

星崎 航太朗, 金子 昂弘, 井田 駿太郎, 吉見 享祐

日本セラミックス協会2022年年会講演予稿集　2022/03

Ultra-high temperature flexure and strain driven amorphization in polycrystalline boron carbide bulks

D. Demirskyi, H. Sepehri-Amin, T.S. Suzuki, K. Yoshimi, O. Vasylkiv

Scripta Materialia　210　114487-114487　2022/03

DOI： 10.1016/j.scriptamat.2021.114487 　

ISSN： 1359-6462

Consolidation and high‐temperature strength of monolithic lanthanum hexaboride

Dmytro Demirskyi, Tohru S. Suzuki, Kyosuke Yoshimi, Oleg O. Vasylkiv

Journal of the American Ceramic Society　105　(6)　4277-4290　2022/01/29

DOI： 10.1111/jace.18331 　

ISSN： 0002-7820

eISSN： 1551-2916

Deformation‐resistant Ta 0.2 Hf 0.8 C solid‐solution ceramic with superior flexural strength at 2000°C

Dmytro Demirskyi, Hanna Borodianska, Toshiyuki Nishimura, Tohru S. Suzuki, Kyosuke Yoshimi, Oleg Vasylkiv

Journal of the American Ceramic Society　105　(1)　512-524　2022/01

DOI： 10.1111/jace.18072 　

ISSN： 0002-7820

eISSN： 1551-2916

Liquidus projection and solidification paths in the Zr-Si-Al ternary system

Nobuaki Sekido, Kazumasa Soeta, Kyosuke Yoshimi

Journal of Alloys and Compounds　885　2021/12/10

DOI： 10.1016/j.jallcom.2021.160911 　

ISSN： 0925-8388

High-temperature deformation in bulk polycrystalline hafnium carbide consolidated using spark plasma sintering

D. Demirskyi, O. Vasylkiv, K. Yoshimi

Journal of the European Ceramic Society　41　(15)　7442-7449　2021/12

DOI： 10.1016/j.jeurceramsoc.2021.08.038 　

ISSN： 0955-2219

eISSN： 1873-619X

An interpretation of creep rupture properties of grade 91 steel service- exposed for 100,000 hours at 600 °C

K. Maruyama, M. Yaguchi, Y. Minami, K. Tamura, K. Yoshimi

Materials at High Temperatures　1-11　2021/11/27

DOI： 10.1080/09603409.2021.2007004 　

ISSN： 0960-3409

eISSN： 1878-6413

Electron beam surface melting of MoSiBTiC alloys: Effect of preheating on cracking behavior and microstructure evolution

Masaya Higashi, Kyosuke Yoshimi

Materials & Design　209　110010-110010　2021/11

DOI： 10.1016/j.matdes.2021.110010 　

ISSN： 0264-1275

Allotropic strengthening and in situ phase transformations during ultra-high-temperature flexure of bulk tantalum nitride

D. Demirskyi, O. Vasylkiv, K. Yoshimi

Materials Science and Engineering: A　826　141954-141954　2021/10

DOI： 10.1016/j.msea.2021.141954 　

ISSN： 0921-5093

Evolution of boron segregation during tempering in B doped 9%Cr ferritic steel

Takumi Osanai, Nobuaki Sekido, Mitsuharu Yonemura, Kouichi Maruyama, Miyuki Takeuchi, Kyosuke Yoshimi

Materials Characterization　177　2021/07

DOI： 10.1016/j.matchar.2021.111192 　

ISSN： 1044-5803

Effect of Cr and Al alloying on the oxidation resistance of a Ti5Si3-incorporated MoSiBTiC alloy

Xi Nan, Tomotaka Hatakeyama, Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi

High Temperature Materials and Processes　40　(1)　204-213　2021/06/28

DOI： 10.1515/htmp-2021-0024 　

ISSN： 0334-6455

eISSN： 2191-0324

In situ Observation of Ternary Eutectic Growth in a Directionally Solidified Mo–Si–B Alloy Using High‐Energy Synchrotron X‐Rays

Georg Hasemann, Linye Zhu, Katja Hauschildt, Malte Blankenburg, Schuntaro Ida, Florian Pyczak, Kyosuke Yoshimi, Manja Krüger

Advanced Engineering Materials　2100111-2100111　2021/05/04

DOI： 10.1002/adem.202100111 　

ISSN： 1438-1656

eISSN： 1527-2648

Oxidation Resistance, Creep Strength and Room-Temperature Fracture Toughness of Mo–28Ti–14Si–6C–6B Alloy

Tomotaka Hatakeyama, Alexander Kauffmann, Susanne Obert, Camelia Gombola, Martin Heilmaier, Kyosuke Yoshimi

Materialia　16　101108-101108　2021/05

DOI： 10.1016/j.mtla.2021.101108 　

ISSN： 2589-1529

Microstructural characterization of arc-melted and directionally solidified near-eutectic molybdenum–silicon–boron alloys Peer-reviewed

Linye Zhu, Shuntaro Ida, Georg Hasemann, Manja Krüger, Kyosuke Yoshimi

Intermetallics　132　107131-107131　2021/05

DOI： 10.1016/j.intermet.2021.107131 　

ISSN： 0966-9795

非化学量論性を利用した高靭性TiC相

井田駿太郎, 渡邊憲郷, 関戸信彰, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　62　(1)　105-117　2021/03

Influence of Carbides Precipitated by Low-temperature Tempering on Room-temperature Mechanical Properties of Grade 91 Steel

Kengo Watanabe, Shuntaro Ida, Kyosuke Yoshimi

Tetsu-to-Hagane　107　(10)　825-834　2021

DOI： 10.2355/tetsutohagane.tetsu-2021-033 　

ISSN： 0021-1575

eISSN： 1883-2954

Diversified biomineralization roles of pteria penguin pearl shell lectins as matrix proteins Peer-reviewed

Tomohisa Ogawa, Rie Sato, Takako Naganuma, Kayeu Liu, Saho Sato, Shizuka Sakaue, Makoto Osada, Kyosuke Yoshimi and Koji Muramoto

International Journal of Molecular Sciences　22　(3)　1-12　2021

DOI： 10.3390/ijms22031081 　

eISSN： 1422-0067

Changes in strengthening mechanisms in creep of 9Cr-1.8W-0.5Mo-VNb steel tested over wide ranges of creep conditions Peer-reviewed

Kouichi Maruyama, Nobuaki Sekido, Kyosuke Yoshimi

International Journal of Pressure Vessels and Piping　190　2021

DOI： 10.1016/j.ijpvp.2021.104312 　

ISSN： 0308-0161

先進9%Crフェライト系耐熱鋼の焼戻し過程におけるBの偏析と炭化物の析出挙動

小山内匠, 関戸信彰, 米村光治, 丸山公一, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　61　(3)　283-292　2020/11

鋳造法で作製されたFe/TiC過共晶三元合金のミクロ組織と室温変形挙動

渡邊憲郷, 井田駿太郎, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　61　(3)　309-321　2020/11

Significant improvement of the oxidation resistance of MoSiBTiC-based multiphase alloys by Ti enrichment Peer-reviewed

Tomotaka Hatakeyama, Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi

Corrosion Science　176　108937-108937　2020/11

DOI： 10.1016/j.corsci.2020.108937 　

ISSN： 0010-938X

Microstructures and mechanical properties of Mg/Zr nanostructured multilayers with coherent interface

Y. Lu, N. Sekido, K. Yoshimi, S. N. Yarmolenko, Q. Wei

Thin Solid Films　712　2020/10/31

DOI： 10.1016/j.tsf.2020.138314 　

ISSN： 0040-6090

High-temperature oxidation behavior of a Ti5Si3-incorporated MoSiBTiC alloy Peer-reviewed

Xi Nan, Mi Zhao, Yuanyuan Lu, Nobuaki Sekido, Kyosuke Yoshimi

Intermetallics　125　106895-106895　2020/10

DOI： 10.1016/j.intermet.2020.106895 　

ISSN： 0966-9795

Orientation relationship between bcc precipitates and Ti5Si3 matrix in Mo–Si–B–Ti–C quinary alloys Peer-reviewed

Tomotaka Hatakeyama, Nobuaki Sekido, Yuta Kimura, Kyosuke Yoshimi

Intermetallics　124　106863-106863　2020/09

DOI： 10.1016/j.intermet.2020.106863 　

ISSN： 0966-9795

Dynamic observation of MoSiBTiC alloy phase transitions using in situ ultrahigh-temperature X-ray diffraction measurement Peer-reviewed

Hiroyuki Fukuyama, Makoto Ohtsuka, Ryogo Sawada, Haruki Nakashima, Yasuo Ohishi, Naohisa Hirao, Masaki Takata, Kyosuke Yoshimi

Materialia　13　100867-100867　2020/09

DOI： 10.1016/j.mtla.2020.100867 　

ISSN： 2589-1529

eISSN： 2589-1529

Synthesis and high-temperature properties of medium-entropy (Ti,Ta,Zr,Nb)C using the spark plasma consolidation of carbide powders

D. Demirskyi, T.S. Suzuki, K. Yoshimi, O. Vasylkiv

Open Ceramics　2　100015-100015　2020/07

DOI： 10.1016/j.oceram.2020.100015 　

ISSN： 2666-5395

Microstructure and Phase Stability of Ti and Al Co-Added MoSiBTiC Alloys Peer-reviewed

Motoyuki Tsukamura, Takateru Yamamuro, Nobuaki Sekido, Sadahiro Tsurekawa, Kyosuke Yoshimi

Journal of the Japan Institute of Metals and Materials　84　(7)　217-226　2020/07/01

DOI： 10.2320/jinstmet.j2019050 　

ISSN： 0021-4876

eISSN： 2433-7501

Microstructures and mechanical properties of TiC-particulate-reinforced Ti–Mo–Al intermetallic matrix composites Peer-reviewed

Y. Lu, M. Watanabe, R. Miyata, J. Nakamura, J. Yamada, H. Kato, K. Yoshimi

Materials Science and Engineering: A　790　139523-139523　2020/07

DOI： 10.1016/j.msea.2020.139523 　

ISSN： 0921-5093

Solidification pathways and phase equilibria in the Mo–Ti–C ternary system Peer-reviewed

Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi

High Temperature Materials and Processes　39　(1)　164-170　2020/05/20

DOI： 10.1515/htmp-2020-0053 　

ISSN： 0334-6455

eISSN： 2191-0324

Microstructural evolution during high-temperature tensile creep at 1,500°C of a MoSiBTiC alloy Peer-reviewed

Sojiro Uemura, Shiho Yamamoto Kamata, Kyosuke Yoshimi, Sadahiro Tsurekawa

High Temperature Materials and Processes　39　(1)　136-145　2020/04/29

DOI： 10.1515/htmp-2020-0039 　

ISSN： 0334-6455

eISSN： 2191-0324

Novel laser additive-manufactured Mo-based composite with enhanced mechanical and oxidation properties Peer-reviewed

Weiwei Zhou, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki

JOURNAL OF ALLOYS AND COMPOUNDS　819　2020/04

DOI： 10.1016/j.jallcom.2019.152981 　

ISSN： 0925-8388

eISSN： 1873-4669

Effect of Cr addition on microstructure and oxidation resistance of a Ti5Si3-containing MoSiBTiC alloy Peer-reviewed

Tomotaka Hatakeyama, Nobuaki Sekido, Kyosuke Yoshimi

Corrosion Science　166　108418-108418　2020/04

DOI： 10.1016/j.corsci.2019.108418 　

ISSN： 0010-938X

Negative Poisson's ratio in Heusler-type Cu–Al–Mn shape memory alloy Peer-reviewed

Sheng Xu, Ryota Tsukuda, Mi Zhao, Xiao Xu, Toshihiro Omori, Kyosuke Yoshimi, Ryosuke Kainuma

Scripta Materialia　177　74-78　2020/03

DOI： 10.1016/j.scriptamat.2019.10.015 　

ISSN： 1359-6462

How Nanoscale Dislocation Reactions Govern Low- Temperature and High-Stress Creep of Ni-Base Single Crystal Superalloys Peer-reviewed

David Bürger, Antonin Dlouhý, Kyosuke Yoshimi, Gunther Eggeler

Crystals　10　(2)　134-134　2020/02/22

DOI： 10.3390/cryst10020134 　

eISSN： 2073-4352

High-temperature mechanical behavior of B2-ordered Ti–Mo–Al alloys Peer-reviewed

Y.Lu, J.Yamada, R.Miyata, H.Kato, K.Yoshimi

Intermetallics　117　106675　2020/02

DOI： 10.1016/j.intermet.2019.106675 　

Effect of hot isostatic pressing on the microstructure and fracture toughness of laser additive-manufactured MoSiBTiC multiphase alloy Peer-reviewed

Weiwei Zhou, Kengo Tsunoda, Naoyuki Nomura, Kyosuke Yoshimi

Materials and Design　196　2020

DOI： 10.1016/j.matdes.2020.109132 　

ISSN： 0264-1275

eISSN： 1873-4197

In-situ formation of ceramic layer on Mo-based composites via laser powder bed fusion Peer-reviewed

Weiwei Zhou, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki

Materialia　10　100655-100655　2020

DOI： 10.1016/j.mtla.2020.100655 　

ISSN： 2589-1529

Phase equilibria and thermodynamic assessment of the Mo–Nb-Re ternary system Peer-reviewed

Shao-yu Yen, Shu-chang Wu, M. Anshar Makhraja, Kai-chi Lo, An-chou Yeh, Kyosuke Yoshimi, Chuan Zhang, Shih-kang Lin

Calphad: Computer Coupling of Phase Diagrams and Thermochemistry　70　2020

DOI： 10.1016/j.calphad.2020.101797 　

A grain size-dependent equation for creep rupture life of grade 91 steel verified up to 233,000 hours Peer-reviewed

K. Maruyama, N. Sekido, K. Yoshimi, Y. Yamamoto

Journal of Pressure Vessel Technology　142　(6)　2020

DOI： 10.1115/1.4047442 　

ISSN： 0094-9930

eISSN： 1528-8978

Synthesis of medium-entropy (Zr1/3Hf1/3Ta1/3)B2 using the spark plasma consolidation of diboride powders Peer-reviewed

Dmytro DEMIRSKYI, Tohru S. SUZUKI, Kyosuke YOSHIMI, Oleg VASYLKIV

Journal of the Ceramic Society of Japan　128　(11)　977-980　2020

DOI： 10.2109/jcersj2.20151 　

ISSN： 1882-0743

eISSN： 1348-6535

High-temperature toughening in ternary medium-entropy (Ta1/3Ti1/3Zr1/3)C carbide consolidated using spark-plasma sintering Peer-reviewed

D. Demirskyi, T. Nishimura, T.S. Suzuki, Y. Sakka, O. Vasylkiv and K. Yoshimi

Journal of Asian Ceramic Societies　8　(4)　1262-1270　2020

DOI： 10.1080/21870764.2020.1840703 　

eISSN： 2187-0764

On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys Peer-reviewed

D. Bürger, A. Dlouhý, K. Yoshimi, G. Eggeler

Materials Science and Engineering A　795　2020

DOI： 10.1016/j.msea.2020.139961 　

Evaluation of Boron Solubility in Iron Solid Solution by Radio-frequency Glow-discharge Optical Emission Spectroscopy Peer-reviewed

Nobuaki Sekido, Yuta Kimura, Takumi Osanai, Toshimi Miyagi, Hiroshi Numakura, Kyosuke Yoshimi

Tetsu-to-Hagane　106　(6)　292-301　2020

DOI： 10.2355/tetsutohagane.tetsu-2019-114 　

ISSN： 0021-1575

eISSN： 1883-2954

Experimental assessment of the microstructure evolution and liquidus projection in the Mo-rich Mo–Si–B system Peer-reviewed

G. Hasemann, S. Ida, L. Zhu, T. Iizawa, K. Yoshimi, M. Krüger

Materials & Design　185　108233-108233　2020/01

DOI： 10.1016/j.matdes.2019.108233 　

ISSN： 0264-1275

Effect of Off-stoichiometry on Elastic Modulus of TiC Phase in Mo-TiC ternary System Peer-reviewed

Shuntaro Ida, Nobuaki Sekido, Kyosuke Yoshimi

Proceedings from JOINT EPRI-123HIMAT INTERNATIONAL CONFERNCE ON ADVANCES IN HIGH TEMPERATURE MATERIALS　830-835　2019/10

Study of solidification pathway of a MoSiBTiC alloy by optical thermal analysis and in-situ observation with electromagnetic levitation Peer-reviewed

Hiroyuki Fukuyama, Ryogo Sawada, Haruki Nakashima, Makoto Ohtsuka, Kyosuke Yoshimi

SCIENTIFIC REPORTS　9　15049　2019/10

DOI： 10.1038/s41598-019-50945-z 　

ISSN： 2045-2322

Effect of Solid Oxygen Source Species on the Al-Oxide Precipitation Behavior in Fe-Al Alloys by Powder Metallurgy Peer-reviewed

Katsuhiro Sato, Nobuaki Sekido, Kyosuke Yoshimi

J.Jpn.Soc.Powder Powder Metallurgy　66　(10)　478-484.　2019/10

MICROSTRUCTURE EVOLUTION IN A HIGH-BORON FERRITIC STEEL DURING CREEP AT 650 ℃ Peer-reviewed

Nobuaki Sekido, Tomoyuki Hatta, Kouichi Maruyama, Kyosuke Yoshimi, Mitsuharu Yoneyama

Proceedings from EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and 2nd International 123 HiMAT Conference on High-temperature Materials　156-161　2019/10

ULTRAHIGH-TEMPERATURE TENSILE CREEP BEHAVIOR OF 1ST GENERATION MoSIBTiC ALLOY Peer-reviewed

Kyosuke Yoshimi, Shiho Kamata, Ryuta Yanagiya, Shuntaro Ida, Sojiro Uemura, Sadahiro Tsurekawa

Proceedings from EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and 2nd International 123 HiMAT Conference on High-temperature Materials　795-802　2019/10

Glycan Binding Profiling of Jacalin-Related Lectins from the Pteria Penguin Pearl Shell. International-journal Peer-reviewed

Tomohisa Ogawa, Rie Sato, Takako Naganuma, Kayeu Liu, Agness Ethel Lakudzala, Koji Muramoto, Makoto Osada, Kyosuke Yoshimi, Keiko Hiemori, Jun Hirabayashi, Hiroaki Tateno

International journal of molecular sciences　20　(18)　2019/09/18

DOI： 10.3390/ijms20184629 　

A new development strategy of light weight solid oxide fuel cells for electrified airplane system Peer-reviewed

S. Hashimoto, K. Yashiro, T. Kawada, N. Kijima, T. Tsuchiya, T. Manabe, T. Kojima, K. Okai, T. Hirota, K. Suzuki, T. Namioka, H. Ito, R. Miyata, H. Takamura, K. Yoshimi, K. Kobayashi

2019 AIAA/IEEE Electric Aircraft Technologies Symposium, EATS 2019　2019/08

DOI： 10.2514/6.2019-4470 　

Recent Research Progress from Mo-Si-based Intermetallics to MoSiBTiC Alloy

Kyosuke Yoshimi, Nobuaki Sekido, Shuntaro Ida

Materia Japan　58　(7)　363-370　2019/07/01

DOI： 10.2320/materia.58.363 　

ISSN： 1340-2625

eISSN： 1884-5843

Mo-Ti-C3元系における凝固過程およびMo/TiC/Mo2C3相間の相平衡

井田駿太郎, 関戸信彰, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　60　(2)　272-281　2019/07

超高温引張クリープ下における第1世代モシブチック合金中の変形ミクロ組織の発達

吉見享祐, 柳谷隆太, Zhu Linye, 井田駿太郎, 関戸信彰, 連川貞弘, 上村宗二朗

日本学術振興会耐熱金属材料第123委員会研究報告　60　(2)　282-289　2019/07

Mo-Si基金属間化合物からMoSiBTiC合金への展開 Peer-reviewed

吉見享祐, 関戸信彰, 井田駿太郎

まてりあ　58　(7)　363-370　2019/07

Fabrication of oxide dispersion strengthened alloys through solid-state reactions between FeAl and Fe2O3 powders Peer-reviewed

Katsuhiro Sato, Nobuaki Sekido, Kyosuke Yoshimi

Materials Science & Engineering A　754　68-74　2019/04

DOI： 10.1016/j.msea.2019.03.060 　

High-temperature flexural strength performance of ternary high-entropy carbide consolidated via spark plasma sintering of TaC, ZrC and NbC Peer-reviewed

D. Demirskyi, H. Borodianska, T.S. Suzuki, Y. Sakka, K. Yoshimi, O. Vasylkiv

Scripta Materialia　164　12-16　2019/04

DOI： 10.1016/j.scriptamat.2019.01.024 　

ISSN： 1359-6462

Changes in Monkman-Grant relation among four creep regions of modified 9Cr-1Mo steel Peer-reviewed

Kouichi Maruyama, Nobuaki Sekido, Kyosuke Yoshimi

749　223-234　2019/03

DOI： 10.1016/j.msea.2019.02.003 　

Effect of Cr Addition on the Phase Equilibria and Oxidation Behavior of NbSi2 Peer-reviewed

Nobuaki Sekido, Ryoma Aizawa, Shunkichi Ueno

Materials Transactions　60　(5)　666-673　2019

DOI： 10.2320/matertrans.MB201809 　

ISSN： 1345-9678

Phase Equilibria Among γ/TCP/GCP Phases in Nb-Poor Region of Ni-Nb-Co Ternary System at Elevated Temperatures Peer-reviewed

Shuntaro Ida, Ryosuke Yamagata, Hirotoyo Nakashima, Satoru Kobayashi, Masao Takeyama

Journal of Phase Equilibria and Diffusion　40　(4)　570-582　2019

DOI： 10.1007/s11669-019-00744-w 　

ISSN： 1547-7037

eISSN： 1863-7345

Special issue on Recent Advances in Indentation Technique Preface Peer-reviewed

Takahito Ohmura, Nobuaki Sekido

Materials Transactions　60　(8)　2019

DOI： 10.2320/matertrans.MPR2019905 　

Evaluation of titanium based alloys as interconnects for the light weight SOFC system Peer-reviewed

K. Kobayashi, R. Miyata, K. Yashiro, H. Takamura, K. Yoshimi, T. Kawada, S. Hashimoto, K. Okai

ECS Transactions　91　(1)　2279-2290　2019

DOI： 10.1149/09101.2279ecst 　

ISSN： 1938-6737

eISSN： 1938-5862

Material development strategy of lightweight solid oxide fuel cells for airplane system electrification Peer-reviewed

S. Hashimoto, T. Hirota, K. Suzuki, T. Namioka, H. Ito, R. Miyata, K. Kobayashi, K. Yashiro, H. Takamura, T. Kawada, K. Yoshimi, N. Kijima, T. Manabe, T. Tsuchiya, T. Kojima, K. Okai

ECS Transactions　91　(1)　311-318　2019

DOI： 10.1149/09101.0311ecst 　

ISSN： 1938-6737

eISSN： 1938-5862

Powder fabrication and laser additive manufacturing of MoSiBTiC alloy Peer-reviewed

Weiwei Zhou, Xiaohao Sun, Kengo Tsunoda, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki

Intermetallics　104　33-42　2019/01

DOI： 10.1016/j.intermet.2018.10.012 　

ISSN： 0966-9795

フェライト系耐熱鋼における長時間クリープ変形後の析出物の三次元観察 Peer-reviewed

八田智之, 関戸信彰, 米村光治, 丸山公一, 吉見享祐

まてりあ　57　(12)　619　2018/12

DOI： 10.2320/materia.57.619 　

Effect of Ti5Si3 phase on Mechanical Properties and Oxidation Resistance of MoSiBTiC-based Alloys Peer-reviewed

HATAKEYAMA Tomotaka, SEKIDO Nobuaki, YOSHIMI Kyosuke

JOURNAL OF THE GAS TURBINE SOCIETY OF JAPAN　46　(6)　486-494　2018/11

MoSiBTiC合金の室温破壊靱性に対する時効熱処理の効果

齋藤哲也, 関戸信彰, 束村基行, 上村宗二朗, 山室賢輝, 連川貞弘, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　59　(3)　505-513　2018/11

Effect of Plastic Strain and Recovery Rate on Thermal Fatigue Behavior in High Heat-resistant Ferritic Stainless Steel SUS444 Peer-reviewed

Tetsuyuki Nakamura, Shin Ishikawa, Kyosuke Yoshimi

Tetsu-to-Hagané　104　(9)　517-523　2018/09

DOI： 10.2355/tetsutohagane.TETSU-2018-017 　

Ultrahigh-temperature tensile creep of TiC-reinforced Mo-Si-B-based alloy Peer-reviewed

Shiho Yamamoto Kamata, Daiki Kanekon, Yuanyuan Lu, Nobuaki Sekido, Kouichi Maruyama, Gunther Eggeler, Kyosuke Yoshimi

Scientific Reports　8　(10487)　2018/07

DOI： 10.1038/s41598-018-28379-w 　

eISSN： 2045-2322

In situ synthesized TiC/Mo-based composites via laser powder bed fusion Peer-reviewed

Weiwei Zhou, Xiaohao Sun, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki

Materials & Design　146　116-124　2018/05

DOI： 10.1016/j.matdes.2018.03.001 　

ISSN： 0264-1275

Gr.91鋼の長時間クリープ破断強度評価の検証

丸山公一, 関戸信彰, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　59　(1)　75-86　2018/03

A proposal for post-assessment test of long-term creep rupture strength of grade 91 steel Peer-reviewed

Kouichi Maruyama, Nobuaki Sekido, Kyosuke Yoshimi

ASME 2018 Symposium on Elevated Temperature Application of Materials for Fossil　2018

DOI： 10.1115/ETAM2018-6706 　

Grain boundary precipitation behavior of δ-Ni3Nb(D0a) phase in a Ni-Nb-Fe ternary model alloy Peer-reviewed

Shuntaro Ida, Satoru Kobayashi, Masao Takeyama

Journal of Alloys and Compounds　764　1033-1038　2018

DOI： 10.1016/j.jallcom.2018.05.169 　

In situ Neutron Diffraction Study on Ferrite and Pearlite Transformations for a 1.5Mn-1.5Si-0.2C Steel Peer-reviewed

Yo TOMOTA, Yan Xu WANG, Takahito OHMURA, Nobuaki SEKIDO, Stefanus HARJO, Takuro KAWASAKI, Wu GONG and Akira TANIYAMA

ISIJ International　58　(11)　2125-2132　2018

DOI： 10.2355/isijinternational.ISIJINT-2018-336 　

ISSN： 0915-1559

eISSN： 1347-5460

Quantitative evaluation of microstructure in mo-si-b-tic alloy produced by melting and tilt casting methods Peer-reviewed

Sojiro Uemura, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, Kyosuke Yoshimi

Materials Transactions　59　(1)　136-145　2018

DOI： 10.2320/matertrans.M2017194 　

ISSN： 1345-9678

On the physical basis of a Larson-Miller constant of 20 Peer-reviewed

K. Maruyama, F. Abe, H. Sato, J. Shimojo, N. Sekido, K. Yoshimi

International Journal of Pressure Vessels and Piping　159　93-100　2018/01/01

DOI： 10.1016/j.ijpvp.2017.11.013 　

ISSN： 0308-0161

Deformation microstructure developed by nanoindentation of a MAX Phase Ti2AlC Peer-reviewed

Yusuke Wada, Nobuaki Sekido, Takahito Ohmura, Kyosuke Yoshimi

Materials Transactions　59　(5)　771-778　2018

DOI： 10.2320/matertrans.MBW201703 　

ISSN： 1345-9678

Effect of microstructural continuity on room-temperature fracture toughness of ZrC-added MoSiB alloys Peer-reviewed

Shunichi Nakayama, Nobuaki Sekido, Sojiro Uemura, Sadahiro Tsurekawa, Kyosuke Yoshimi

Materials Transactions　59　(4)　518-527　2018

DOI： 10.2320/matertrans.MJ201613 　

ISSN： 1345-9678

Effect of indentation orientation on the onset of plastic deformation for a MAX phase Ti2AlC Peer-reviewed

Yusuke Wada, Nobuaki Sekido, Takahito Ohmura, Kyosuke Yoshimi

Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals　82　(5)　162-168　2018

DOI： 10.2320/jinstmet.J2017042 　

ISSN： 0021-4876

Carbon nanotubes as a unique agent to fabricate nanoceramic/metal composite powders for additive manufacturing Peer-reviewed

Weiwei Zhou, Xiaohao Sun, Keiko Kikuchi, Naoyuki Nomura, Kyosuke Yoshimi, Akira Kawasaki

MATERIALS & DESIGN　137　276-285　2018/01

DOI： 10.1016/j.matdes.2017.10.034 　

ISSN： 0264-1275

eISSN： 1873-4197

Microstructure, high-temperature deformability and oxidation resistance of a Ti5Si3-containing multiphase MoSiBTiC alloy Peer-reviewed

Mi Zhao, Shunichi Nakayama, Tomotaka Hatakeyama, Junya Nakamura, Kyosuke Yoshimi

INTERMETALLICS　90　169-179　2017/11

DOI： 10.1016/j.intermet.2017.07.018 　

ISSN： 0966-9795

eISSN： 1879-0216

A Postassessment Test of 100,000 h Creep Rupture Strength of Grade 91 Steel at 600 degrees C Peer-reviewed

K. Maruyama, N. Sekido, K. Yoshimi

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME　139　(5)　051404-1-051404-7　2017/10

DOI： 10.1115/1.4037446 　

ISSN： 0094-9930

eISSN： 1528-8978

Causes of heat-to-heat variation of creep strength in grade 91 steel Peer-reviewed

K. Maruyama, J. Nakamura, N. Sekido, K. Yoshimi

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　696　104-112　2017/06

DOI： 10.1016/j.msea.2017.04.050 　

ISSN： 0921-5093

eISSN： 1873-4936

Room-temperature fracture toughness of MoSiBTiC alloys Peer-reviewed

Takahiro Moriyama, Kyosuke Yoshimi, Mi Zhao, Tiffany Masnou, Tomohiro Yokoyama, Junya Nakamura, Hirokazu Katsui, Takashi Goto

INTERMETALLICS　84　92-102　2017/05

DOI： 10.1016/j.intermet.2017.01.004 　

ISSN： 0966-9795

eISSN： 1879-0216

電磁超音波共鳴法を用いたMo-Si-B合金の弾性率測定

中村純也, 関戸信彰, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　58　(1)　95-104　2017/03

Gr.91鋼におけるヒート間のクリープ強度差の原因

丸山公一, 中村純也, 関戸信彰, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　58　(1)　9-22　2017/03

Effect of B2-ordered phase on the deformation behavior of Ti-Mo-Al alloys at elevated temperature Peer-reviewed

Yuanyuan Lu, Jyunpei Yamada, Junya Nakamura, Kyosuke Yoshimi, Hidemi Kato

JOURNAL OF ALLOYS AND COMPOUNDS　696　130-135　2017/03

DOI： 10.1016/j.jallcom.2016.11.211 　

ISSN： 0925-8388

eISSN： 1873-4669

Application of Radio Frequency Glow Discharge Sputtering for Nanoindentation Sample Preparation Peer-reviewed

N. Sekido, T. Ohmura, K. Tsuzaki

Journal of Materials Engineering and Performance　26　(3)　1245-1250　2017

DOI： 10.1007/s11665-017-2521-1 　

ISSN： 1059-9495

eISSN： 1544-1024

The evaluation of the composition dependence of fracture toughness of Al3Nb alloys by using micro-size fracture testing Peer-reviewed

N. Matsuzaki, K. Ikeda, S. Miura, N. Sekido, T. Ohmura

MRS Advances　2　(26)　1405-1410　2017

DOI： 10.1557/adv.2017.167 　

Cause of Heat-to-Heat Variation in Creep Strength of Gr.91 Steel

Kouichi MARUYAMA, Junya NAKAMURA, Nobuaki SEKIDO and Kyosuke YOSHIMI

Report of the 123 Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　58　(1)　9-22　2017

Elastic Moduli Measurement of Mo-Si-B Alloys by the Electro-Magnetic Acoustic Resonance (EMAR) Method

Junya NAKAMURA, Nobuaki SEKIDO and Kyosuke YOSHIMI

Report of the 123 Committee on Heat-Resisting Materials and Alloys Japan Society for the Promotion of Science　58　(1)　95-104　2017

長時間熱処理した"IN738LC"における粒界近傍組織の3次元観察

関戸信彰, 吉見享祐, 齊藤大蔵, 吉岡洋明

日本学術振興会耐熱金属材料第123委員会研究報告　58　(2)　161-165　2017

Comparison of the measurements of austenite volume fraction by various methods for Mn-Si-C steel Peer-reviewed

Y. Tomota, N. Sekido, P. Xu, T. Kawasaki, S. Harjo, M. Tanaka, T. Shinohara, Y. Su, A. Taniyama

Tetsu to Hagané　103　(10)　570-578　2017

DOI： 10.2355/tetsutohagane.TETSU-2017-045 　

ISSN： 0021-1575

eISSN： 1883-2954

第1世代モシブチック合金の高温クリープ変形によるミクロ組織劣化

鎌田詩歩, Yuanyuan Lu, 吉見享祐

第45回日本ガスタービン学会定期講演会(松山)講演論文集　229-234　2017

MoSiBTiC合金のミクロ組織形成と材料特性に及ぼすTiの効果

畠山友孝, 吉見享祐

第45回日本ガスタービン学会定期講演会(松山)講演論文集　223-228　2017

Mechanical properties and dislocation character of YB4 and YB6 Peer-reviewed

N. Sekido, T. Ohmura, J.H. Perepezko

Intermetallics　89　86-91　2017

DOI： 10.1016/j.intermet.2017.05.024 　

In situ Observations of Transformation Behavior upon Heating for a 1.5Mn-1.5Si-0.2C Steel -Comparison between Neutron Diffraction, XRD, EBSD and Dilatometry- Peer-reviewed

Y. Tomota, N. Sekido, S. Harjo, T. Kawasaki, W. Gong, A. Taniyama

ISIJ International　57　(12)　2237-2240　2017

DOI： 10.2355/isijinternational.ISIJINT-2017-272 　

第1世代MoSiBTiC合金の引張クリープ挙動

鎌田詩歩, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　57　(3)　256-265　2016/11

Characterization of Mo/Mo2C interface in MoSiBTiC alloy Peer-reviewed

Junya Nakamura, Daiki Kanekon, Kyosuke Yoshimi

MATERIALS LETTERS　180　340-343　2016/10

DOI： 10.1016/j.matlet.2016.04.133 　

ISSN： 0167-577X

eISSN： 1873-4979

Erratum to “Determination of ɑ/β phase boundaries and mechanical characterization of Mg-Sc binary alloys” [Mater. Sci. Eng. A 670 (2016) 335–341] Peer-reviewed

Yukiko Ogawa, Daisuke Ando, Yuji Sutou, Kyosuke Yoshimi, Junichi Koike

Materials Science and Engineering A　674　713　2016/09/30

DOI： 10.1016/j.msea.2016.08.016 　

ISSN： 0921-5093

Determination of alpha/beta phase boundaries and mechanical characterization of Mg-Sc binary alloys Peer-reviewed

Yukiko Ogawa, Daisuke Ando, Yuji Sutou, Kyosuke Yoshimi, Junichi Koike

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　670　335-341　2016/07

DOI： 10.1016/j.msea.2016.06.028 　

ISSN： 0921-5093

eISSN： 1873-4936

Assessment of Long-Term Creep Rupture Strength of T91 Steel by Multiregion Rupture Data Analysis Peer-reviewed

K. Maruyama, J. Nakamura, K. Yoshimi

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME　138　(3)　031407　2016/06

DOI： 10.1115/1.4032647 　

ISSN： 0094-9930

eISSN： 1528-8978

ZrC添加したMo-Si-B合金の高温圧縮強度と室温破壊靱性

中山俊一, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　57　(1)　93-102　2016/03

Solidification of Bcc/T1/T2  three-phase microstructure in Mo–Nb–Si–B alloys Peer-reviewed

N. Takata, N. Sekido, M. Takeyama, J.H. Perepezko, M. Follett-Figueroa, C. Zhang

Intermetallics　72　1-8　2016

DOI： 10.1016/j.intermet.2016.01.001 　

ISSN： 0966-9795

3D Observation on Nano-sized VC Precipitates Formed in a Low Carbon Steel through Interphase Precipitation Peer-reviewed

N. Sekido, N. Kamikawa, K. Tsuzaki, T. Ohmura, T. Hara, G. Miyamoto, T. Furuhara

Materia Japan　55　(12)　593-593　2016

DOI： 10.2320/materia.55.593 　

Microstructure and Mechanical Properties of the ZrC-Added Mo-Si-B Alloys Prepared by Arc-Melting Peer-reviewed

Shunichi Nakayama, Kyosuke Yoshimi

JOURNAL OF THE JAPAN INSTITUTE OF METALS　80　(1)　92-101　2016

DOI： 10.2320/jinstmet.JB201505 　

ISSN： 0021-4876

eISSN： 1880-6880

Effects of Microstructure on High-Temperature Strength of TiC-Added Mo-Si-B Alloys Peer-reviewed

Shiho Yamamoto, Kyosuke Yoshimi, Joungwook Kim, Kentaro Yokoyama

JOURNAL OF THE JAPAN INSTITUTE OF METALS　80　(1)　51-59　2016

DOI： 10.2320/jinstmet.JB201504 　

ISSN： 0021-4876

eISSN： 1880-6880

Quantitative Evaluation of Microstructure in Mo-Si-B-TiC Alloy Produced by Melting and Tilt Casting Method Peer-reviewed

Sojiro Uemura, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, Kyosuke Yoshimi

JOURNAL OF THE JAPAN INSTITUTE OF METALS　80　(8)　529-538　2016

DOI： 10.2320/jinstmet.J2016010 　

ISSN： 0021-4876

eISSN： 1880-6880

Effect of Nb/W Ratio on Fe-2 (Nb, W) Laves Phase Formation in Fe-Cr-Al-Nb-W Alloy Peer-reviewed

Ryosuke Yamagata, Kyosuke Yoshimi

JOURNAL OF THE JAPAN INSTITUTE OF METALS　80　(10)　646-654　2016

DOI： 10.2320/jinstmet.J2016027 　

ISSN： 0021-4876

eISSN： 1880-6880

EVALUATION OF LONG-TERM CREEP RUPTURE LIFE OF GR.91 STEEL BY ANALYSIS OF ON-GOING CREEP CURVES Peer-reviewed

Kouichi Maruyama, Junya Nakamura, Kyosuke Yoshimi, Yuji Nagae

ADVANCES IN MATERIALS TECHNOLOGY FOR FOSSIL POWER PLANTS: PROCEEDINGS FROM THE EIGHTH INTERNATIONAL CONFERENCE, 2016　466-477　2016

第一原理クラスター変分法によるNi3Alの熱膨張係数および体積弾性率の温度依存性のシミュレーション

束村 基行, 吉見 享祐, 毛利 哲夫

日本学術振興会耐熱金属材料第123委員会研究報告　56　(3)　207-216　2015/11

領域区分解析によるT91鋼のクリープ破断強度評価

丸山 公一, 中村 純也, 吉見 享祐

日本学術振興会耐熱金属材料第123委員会研究報告　56　(3)　173-183　2015/11

Prediction of Long-Term Creep Rupture Life of Grade 122 Steel by Multiregion Analysis Peer-reviewed

K. Maruyama, J. Nakamura, K. Yoshimi

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME　137　(2)　021403-1-021403-5　2015/04

DOI： 10.1115/1.4028203 　

ISSN： 0094-9930

eISSN： 1528-8978

Effect of Ti addition on density and microstructure development of MoSiBTiC alloy Peer-reviewed

Joung Wook Kim, Kyosuke Yoshimi, Hirokazu Katsui, Takashi Goto

Materials Research Society Symposium Proceedings　1760　73-78　2015

DOI： 10.1557/opl.2015.8 　

ISSN： 0272-9172

TENSILE CREEP PROPERTIES OF TiC-ADDED Mo-Si-B ALLOYS IN THE ULTRAHIGH TEMPERATURE REGION Peer-reviewed

Kyosuke Yoshimi, Daiki Kanekon, Shiho Yamamoto, Joung-Wook Kim, Junya Nakamura, Kouichi Maruyama

Proceedings of 123HiMAT-2015　350-353　2015

Phase Stability, Microstructure and Ultrahigh-Temperature Strength of Mo-Si-B-Based Alloys for the Applications in Uncooling Turbine Systems Peer-reviewed

Kyosuke Yoshimi, Takafumi Iizawa, Shiho Yamamoto, Junya Nakamura, Kouichi Maruyama, Hirokazu Katsui, Takashi Goto

Proceedings of International Gas Turbine Congress 2015 Tokyo　319-327　2015

Wavelength-dependent magnetic transitions of self-organized iron-aluminum stripes induced by pulsed laser irradiation Peer-reviewed

Yutaka Yoshida, Seiichi Watanabe, Hideo Kaiju, Junji Nishii, Kyosuke Yoshimi

JOURNAL OF APPLIED PHYSICS　117　(4)　2015/01

DOI： 10.1063/1.4906523 　

ISSN： 0021-8979

eISSN： 1089-7550

Novel Matrix Proteins of Pteria penguin Pearl Oyster Shell Nacre Homologous to the Jacalin-Related beta-Prism Fold Lectins Peer-reviewed

Takako Naganuma, Wataru Hoshino, Yukihiro Shikanai, Rie Sato, Kaiyue Liu, Saho Sato, Koji Muramoto, Makoto Osada, Kyosuke Yoshimi, Tomohisa Ogawa

PLOS ONE　9　(11)　e112326　2014/11

DOI： 10.1371/journal.pone.0112326 　

ISSN： 1932-6203

Al含有フェライト系耐熱鋼に晶出するLaves相の元素分配挙動とミクロ組織の発達過程

山形遼介, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　55　(3)　257-263　2014/11

Site-occupation behavior and solid-solution hardening effect of rhenium in Mo5SiB2 Peer-reviewed

Junya Nakamura, Takahiro Kaneko, Takashi Hara, Kyosuke Yoshimi, Kouichi Maruyama, Hirokazu Katsui, Takashi Goto

INTERMETALLICS　53　85-91　2014/10

DOI： 10.1016/j.intermet.2014.04.009 　

ISSN： 0966-9795

eISSN： 1879-0216

High-Temperature Compressive Properties of TiC-Added Mo-Si-B Alloys Peer-reviewed

Kyosuke Yoshimi, Junya Nakamura, Daiki Kanekon, Shiho Yamamoto, Kouichi Maruyama, Hirokazu Katsui, Takashi Goto

JOM　66　(9)　1930-1938　2014/09

DOI： 10.1007/s11837-014-1097-6 　

ISSN： 1047-4838

eISSN： 1543-1851

Nanoplastic deformation on Ti-39 at.% Al single crystals for manipulation of every single gamma lamella Peer-reviewed

Dai-Xiu Wei, Yuichiro Koizumi, Hiroaki Nishiyama, Akinori Yamanaka, Masahiko Yoshino, Shinpei Miyamoto, Kyosuke Yoshimi, Akihiko Chiba

ACTA MATERIALIA　76　331-341　2014/09

DOI： 10.1016/j.actamat.2014.05.031 　

ISSN： 1359-6454

eISSN： 1873-2453

Magnetic Properties on FeAl Stripes and Dots Induced by Nanosecond Pulsed Laser Irradiation Peer-reviewed

H. Kaiju, Y. Yoshida, S. Watanabe, K. Kondo, A. Ishibashi, K. Yoshimi

Journal of The Magnetics Society of Japan　38　(4)　157-161　2014/08

DOI： 10.3379/msjmag.1407R001 　

ISSN： 1882-2924

High-temperature elastic anisotropy of B2-type FeAl Peer-reviewed

Mi Zhao, Kyosuke Yoshimi, Junya Nakamura, Kunio Yubuta, Takamasa Sugawara

SCRIPTA MATERIALIA　82　37-40　2014/07

DOI： 10.1016/j.scriptamat.2014.03.016 　

ISSN： 1359-6462

Mo-Si-B三元系合金の高温強度と変形組織に対する合金組成の影響

中村純也, 森山貴裕, 金今大樹, 丸山公一, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　55　(2)　165-172　2014/07

Magnetic properties on the surface of FeAl stripes induced by nanosecond pulsed laser irradiation Peer-reviewed

H. Kaiju, Y. Yoshida, S. Watanabe, K. Kondo, A. Ishibashi, K. Yoshimi

JOURNAL OF APPLIED PHYSICS　115　(17)　2014/05

DOI： 10.1063/1.4862376 　

ISSN： 0021-8979

eISSN： 1089-7550

Experimental study of Mo-ss-T-2, Mo-ss-Mo3Si-T-2, and Mo3Si-T-2 eutectic reactions in Mo-rich Mo-Si-B alloys Peer-reviewed

Seong-Ho Ha, Kyosuke Yoshimi, Junya Nakamura, Takahiro Kaneko, Kouichi Maruyama, Rong Tu, Takashi Goto

JOURNAL OF ALLOYS AND COMPOUNDS　594　52-59　2014/05

DOI： 10.1016/j.jallcom.2014.01.089 　

ISSN： 0925-8388

eISSN： 1873-4669

第１世代モシブチック合金の室温破壊靭性

森山貴裕, 中村純也, 吉見享祐, 丸山公一

日本学術振興会耐熱金属材料第123委員会研究報告　55　(1)　63-72　2014/03

Mo5SiB2中のTiのサイト占有挙動

金子昂弘, 中村純也, 吉見享祐, 丸山公一

日本学術振興会耐熱金属材料第123委員会研究報告　55　(1)　55-62　2014/03

Phase Equilibria, Microstructure, and High-Temperature Strength of TiC-Added Mo-Si-B Alloys Peer-reviewed

Shimpei Miyamoto, Kyosuke Yoshimi, Seong-Ho Ha, Takahiro Kaneko, Junya Nakamura, Tetsuya Sato, Kouichi Maruyama, Rong Tu, Takashi Goto

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE　45A　(3)　1112-1123　2014/03

DOI： 10.1007/s11661-013-1779-7 　

ISSN： 1073-5623

eISSN： 1543-1940

Thermal vacancy behavior analysis through thermal expansion, lattice parameter and elastic modulus measurements of B2-type FeAl Peer-reviewed

Mi Zhao, Kyosuke Yoshimi, Kouichi Maruyama, Kunio Yubuta

ACTA MATERIALIA　64　382-390　2014/02

DOI： 10.1016/j.actamat.2013.10.051 　

ISSN： 1359-6454

eISSN： 1873-2453

High temperature creep behavior and effects of stacking fault energy in Mg-Y and Mg-Y-Zn dilute solid solution alloys Peer-reviewed

Mayumi Suzuki, Yasuyuki Murata, Kyosuke Yoshimi

Materials Science Forum　783-786　491-496　2014

DOI： 10.4028/www.scientific.net/msf.783-786.491 　

Evaluation of long-term creep rupture life of strength enhanced high Cr ferritic steel on the basis of its temperature dependence Peer-reviewed

K. Maruyama, J. Nakamura, K. Yoshimi

Proceedings from the Seventh International Conference (Advances in Materials Technology for Fossil Power Plants)　732-743　2014

Evaluation of tool performance of recycle-typed Fe3Al based alloy for pure Cu Peer-reviewed

Itoi. T, Sudo. T, Yoshimi. K

Materials Science Forum　783-786　1142-1146　2014

DOI： 10.4028/www.scientific.net/MSF.783-786.1142 　

Change in Temperature Dependence of Creep Rupture Life of High Cr Ferritic Steel Peer-reviewed

Kouichi Maruyama, Junya Nakamura, Kyosuke Yoshimi

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN　100　(3)　414-420　2014

DOI： 10.2355/tetsutohagane.100.414 　

ISSN： 0021-1575

eISSN： 1883-2954

先進高クロムフェライト鋼のクリープ破断時間における温度依存性の変化

丸山公一, 中村純也, 吉見享祐

日本学術振興会耐熱金属材料第123委員会研究報告　54　(3)　255-264　2013/11

第一世代モシブチック合金の高温強度と室温破壊靱性

吉見享祐, 中村純也, 森山貴裕, 宮本慎平, 金子昂弘, 金今大樹, 丸山公一

日本学術振興会耐熱金属材料第123委員会研究報告　54　(3)　293-301　2013/11

Mo₅SiB₂の相安定性に対するRe添加の効果

中村純也, 原崇, 金子昂弘, 吉見享祐, 丸山公一

日本学術振興会耐熱金属材料第123委員会研究報告　54　(2)　183-191　2013/07

Analysis of Thermal Vacancy Behavior through Thermal Expansion, Lattice Parameter and Elastic Modulus Measurements for B2-type FeAl

Mi Zhao, Kyosuke Yoshimi, Kouichi Maruyama, Kunio Yubuta

日本学術振興会耐熱金属材料第123委員会研究報告　54　(2)　193-205　2013/07

Nanopatterns induced by pulsed laser irradiation on the surface of an Fe-Al alloy and their magnetic properties Peer-reviewed

Yutaka Yoshida, Kazuya Oosawa, Seiichi Watanabe, Hideo Kaiju, Kenji Kondo, Akira Ishibashi, Kyosuke Yoshimi

APPLIED PHYSICS LETTERS　102　(18)　183109　2013/05

DOI： 10.1063/1.4804363 　

ISSN： 0003-6951

Intermetallic-Based Alloys-Science, Technology and Applications: Preface

Ian Baker, Martin Heilmaier, Sharvan Kumar, Kyosuke Yoshimi

Intermetallic-Based Alloys-Science　2013

DOI： 10.1557/opl.2013.437 　

Role of thermal vacancies on temperature dependence of lattice parameter and elastic moduli in B2-type FeAl Peer-reviewed

Mi Zhao, Kyosuke Yoshimi, Kouichi Maruyama, Kunio Yubuta

Materials Research Society Symposium Proceedings　1516　169-175　2013

DOI： 10.1557/opl.2012.1682 　

ISSN： 0272-9172

Compositional regions of single phases at 1800 degrees C in Mo-rich Mo-Si-B ternary system Peer-reviewed

Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama, Rong Tu, Takashi Goto

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　552　179-188　2012/08

DOI： 10.1016/j.msea.2012.05.028 　

ISSN： 0921-5093

電磁超音波共鳴法によって測定された弾性定数およびその温度依存性の最適化

篠崎一平, 吉見享祐, 丸山公一, 長谷川泰士

日本学術振興会耐熱金属材料第123委員会研究報告　53　(2)　141-150　2012/07

電子プローブマイクロアナライザの定量性改善によるMo-Si-B合金の液相投影図ならびに状態図の再検討

河星鎬, 吉見享祐, 丸山公一, 中村純也, 金子昂弘, 塗溶, 後藤孝

日本学術振興会耐熱金属材料第123委員会研究報告　53　(2)　151-162　2012/07

三相共晶反応を利用したMo-Mo₅SiB₂-TiC合金の組織制御

宮本慎平, 佐藤徹也, 河星鎬, 吉見享祐, 丸山公一

日本学術振興会耐熱金属材料第123委員会研究報告　53　(1)　51-58　2012/03

Novel Low-temperature Solid-carburizing Using C-60 Fullerene for Austenitic Stainless Steel SUS316L Peer-reviewed

Yuya Miyazaki, Shimpei Miyamato, Kyosuke Yoshimi, Kouichi Maruyama

ISIJ INTERNATIONAL　52　(11)　2076-2082　2012

DOI： 10.2355/isijinternational.52.2076 　

ISSN： 0915-1559

Microstructure and Creep Strength of Rare-Earth Element Added Mg-Al-Ca Hot-Extruded Alloys

Naoki Tsunoda, Kyosuke Yoshimi, Kouichi Maruyama

Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science　52　(1)　41-49　2011/03

Materials Research Society Symposium: Preface Peer-reviewed

M. Palm, B. Bewlay, S. Kumar, K. Yoshimi

Intermetallic-Based Alloys for Structural and Functional Applications (MRS SYMPOSIUM PROCEEDINGS 2010)　1295　2011

Analysis of vacancy agglomeration processes by Matusita's method for B2 FeAl Peer-reviewed

Kyosuke Yoshimi, Masafumi Tsunekane, Kouichi Maruyama

Materials Research Society Symposium Proceedings　1295　177-182　2011

DOI： 10.1557/opl.2011.528 　

ISSN： 0272-9172

Microstructural Evolution of Mo-Si-B Ternary Alloys Through Heat Treatment at 1800 degrees C Peer-reviewed

Kyosuke Yoshimi, Seong-Ho Ha, Kouichi Maruyama, Rong Tu, Takashi Goto

EURO SUPERALLOYS 2010　278　527-+　2011

DOI： 10.4028/www.scientific.net/AMR.278.527 　

ISSN： 1022-6680

Fabrication and wear properties of Fe3Al-based composites Peer-reviewed

T. Itoi, S. Mineta, H. Kimura, K. Yoshimi, M. Hirohashi

INTERMETALLICS　18　(11)　2169-2177　2010/11

DOI： 10.1016/j.intermet.2010.07.014 　

ISSN： 0966-9795

eISSN： 1879-0216

Partitioning Behavior and Effect on Microstructure Development of Re in Mo-Si-B Alloys

Akira Yamaguchi, Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama

Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science　51　(3)　245-252　2010/11

Phase Formation and Solidification Routes Near Mo-Mo5SiB2 Eutectic Point in Mo-Si-B System Peer-reviewed

Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama, Rong Tu, Takashi Goto

MATERIALS TRANSACTIONS　51　(9)　1699-1704　2010/09

DOI： 10.2320/matertrans.M2010153 　

ISSN： 1345-9678

eISSN： 1347-5320

Differential scanning calorimetry study on annihilation behavior of supersaturated thermal vacancies in B2-type FeAl Invited Peer-reviewed

Kyosuke Yoshimi, Masafumi Tsunekane, Kouichi Maruyama

INTERMETALLICS　18　(7)　1265-1272　2010/07

DOI： 10.1016/j.intermet.2010.02.019 　

ISSN： 0966-9795

Preparation of recycle-typed Fe3Al alloy and its application for cutting tool materials Peer-reviewed

T. Itoi, Y. Watanabe, Y. Nishikawa, H. Kimura, K. Yoshimi, M. Hirohashi

INTERMETALLICS　18　(7)　1396-1400　2010/07

DOI： 10.1016/j.intermet.2010.01.030 　

ISSN： 0966-9795

Cr concentration dependence of overestimation of long term creep life in strength enhanced high Cr ferritic steels Peer-reviewed

K. Maruyama, H. Ghassemi Armaki, R. P. Chen, K. Yoshimi, M. Yoshizawa, M. Igarashi

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING　87　(6)　276-281　2010/06

DOI： 10.1016/j.ijpvp.2010.03.012 　

ISSN： 0308-0161

Influence of vacuum annealing conditions on the surface oxidation and vacancy condensation in the surface of an FeAl single crystal Peer-reviewed

A. Yamauchi, M. Tsunekane, Kazuya Kurokawa, Shuji Hanada, Kyosuke Yoshimi

INTERMETALLICS　18　(4)　412-416　2010/04

DOI： 10.1016/j.intermet.2009.08.014 　

ISSN： 0966-9795

Premature Creep Rupture and Overestimation of Rupture Life in Modified 9Cr–1Mo Steel Peer-reviewed

R. P. Chen, H. Ghassemi Armaki, Kyosuke Yoshimi, Kouichi Maruyama, Yusuke Minami, Masaaki Igarashi

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN　96　(9)　564-571　2010

DOI： 10.2355/tetsutohagane.96.564 　

ISSN： 0021-1575

eISSN： 1883-2954

Effects of lamellar thickness on misfit dislocation introduction and mechanical properties of gamma/alpha(2) nano-lamellar TiAl alloys Peer-reviewed

K. Maruyama, A. Tabata, Y. Toriyama, M. Suzuki, K. Yoshimi

15TH INTERNATIONAL CONFERENCE ON THE STRENGTH OF MATERIALS (ICSMA-15)　240　2010

DOI： 10.1088/1742-6596/240/1/012101 　

ISSN： 1742-6588

As-cast Microstructure of Mo-Si-B Ternary Alloys and Their Evolution by Heat Treatment Peer-reviewed

Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama

Proceedings of 18th international symposium on Processing and Fabrication of Advanced Materials (PFAM XVIII)　2　937-946　2009/12

Annihilation Behavior of Supersaturated Thermal Vacancies in Water-Quenched FeAl Single Crystal Invited Peer-reviewed

Kyosuke Yoshimi, Masafumi Tsunekane, Kouichi Maruyama

Proceedings of 18th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XVIII)　4　1733-1742　2009/12

Current Status and Future Prospects of Fe-Al Intermetallic Compounds as Structural Materials Invited

Kyosuke Yoshimi, Kouichi Maruyama, Shuji Hanada

Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science　50　(3)　439-449　2009/11

Wear and Cutting Tool Properties of Recycled-Type Fe3Al Based Composites Invited

Takaomi Itoi, Yukihiro Nishikawa, Hisamichi Kimura, Kyosuke Yoshimi, Mitsuji Hirohashi

Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science　50　(3)　451-459　2009/11

Effect of heat treatment on microstructure evolution in Mo/Mo5SiB2 alloys

Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama

Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science　50　(3)　315-324　2009/11

Nanostructure controlling in Zr-based metallic glasses using icosahedral local structure Peer-reviewed

J. Saida, H. Kato, A. D. Setyawan, K. Yoshimi, A. Inoue

JOURNAL OF ALLOYS AND COMPOUNDS　483　(1-2)　231-234　2009/08

DOI： 10.1016/j.jallcom.2008.07.182 　

ISSN： 0925-8388

As-cast microstructure and their changes by heat treatment in Mo-Si-B ternary alloys

Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama

Report of the 123rd Committee on Heat-Resisting Materials and Alloys, Japan Society for the Promotion of Science　50　(2)　243-254　2009/07

Temperature and stress dependence of creep life of welded joints in strength enhanced high cr ferritic steels Peer-reviewed

K. Maruyama, K. Yoshimi, Y. Hasegawa, H. Morimoto, F. Masuyama

Energy Materials: Materials Science and Engineering for Energy Systems　4　(2)　70-75　2009/06

DOI： 10.1179/174892310X12811032100150 　

ISSN： 1748-9237 1748-9245

Effects of samarium (Sm) additions on the microstructure and mechanical properties of as-cast and hot-extruded Mg-5 wt%Al-3 wt%Ca-based alloys Peer-reviewed

Hyeon-Taek Son, Jae-Seol Lee, Dae-Guen Kim, Kyosuke Yoshimi, Kouichi Maruyama

JOURNAL OF ALLOYS AND COMPOUNDS　473　(1-2)　446-452　2009/04

DOI： 10.1016/j.jallcom.2008.06.016 　

ISSN： 0925-8388

Cr Concentration Dependence of Overestimation of Long Term Creep Life in Strength Enhanced High Cr Ferritic Steels Peer-reviewed

K. Maruyama, H. Ghassemi Armaki, R. P. Chen, K. Yoshimi, M. Yoshizawa, M. Igarashi

CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS　964-+　2009

Effect of Particle Size of Mo Solid Solution on Hardness of Mo(5)SiB(2)/Mo-Based Alloys Peer-reviewed

Kyosuke Yoshimi, Yusuke Kondo, Kouichi Maruyama

ADVANCED INTERMETALLIC-BASED ALLOYS FOR EXTREME ENVIRONMENT AND ENERGY APPLICATIONS　1128　431-436　2009

ISSN： 0272-9172

Carbon Coating on Iron Substrate Produced by Plasma Spraying Using Fullerene Granules Peer-reviewed

Kyosuke Yoshimi, Tatsuo Ohba, Kouichi Maruyama

Journal of the Japan Society for Heat Treatment, Special Issue for the Proceedings of the17th IFHTSE Congress　49　(S1)　225-228　2009

Heat Treatment Effect on Self-Assembling Process of Supersaturated Thermal Vacancies in B2-Type Aluminides Peer-reviewed

Masafumi Tsunekane, Kyosuke Yoshimi, Kouichi Maruyama

Journal of the Japan Society for Heat Treatment, Special Issue for the Proceedings of the17th IFHTSE Congress　49　(S1)　292-295　2009

Self-assembling behavior of supersaturated thermal vacancies in FeA1 single-crystal Peer-reviewed

Masafumi Tsunekane, Kyosuke Yoshimi, Kouichi Maruyama

ACTA MATERIALIA　56　(13)　3162-3168　2008/08

DOI： 10.1016/j.actamat.2008.03.002 　

ISSN： 1359-6454

Effect of Mo particle size on toughening of Mo5SiB2/Mo in-situ composites

Kyosuke Yoshimi, Yusuke Kondo, Kouichi Maruyama

日本学術振興会耐熱金属材料第123委員会研究報告　49　(2)　215-225　2008/07/15

The effects of yttrium element on microstructure and mechanical properties of Mg-5 mass% Al-3 mass% Ca based alloys fabricated by gravity casting and extrusion process Peer-reviewed

Hyeon-Taek Son, Jae-Seol Lee, Chang-Seog Kang, Jung-Chan Bae, Kyosuke Yoshimi, Kouichi Maruyama

MATERIALS TRANSACTIONS　49　(5)　945-951　2008/05

DOI： 10.2320/matertrans.MC200777 　

ISSN： 1345-9678

eISSN： 1347-5320

Microstructure and mechanical properties of Mg-Al-Ca-Nd alloys fabricated by gravity casting and extrusion process Peer-reviewed

Hyeon-Taek Son, Jae-Seol Lee, Ik-Hyun Oh, Dae-Guen Kim, Kyosuke Yoshimi, Kouichi Maruyama

MATERIALS TRANSACTIONS　49　(5)　1025-1031　2008/05

DOI： 10.2320/matertrans.MC200774 　

ISSN： 1345-9678

eISSN： 1347-5320

Surface Modification of Iron Substrate by Plasma Spraying using Fullerene Granules

Tatsuo Ohba, Kyosuke Yoshimi, Kouichi Maruyama

日本学術振興会耐熱金属材料第123委員会研究報告　49　(1)　99-107　2008/03/03

Methodology of creep data analysis for advanced high Cr ferritic steel Peer-reviewed

Koulchi Maruyama, Kyosuke Yoshimi

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 9　631-636　2008

Methodology of creep data analysis for advanced high Cr ferritic steel Invited Peer-reviewed

Kouichi Maruyama, Kyosuke Yoshimi

2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8　26150　631-636　2008

DOI： 10.1115/CREEP2007-26150 　

Influence of data analysis method and allowable stress criterion on allowable stress of Gr.122 heat resistant steel Peer-reviewed

Kouichi Maruyama, Kyosuke Yoshimi

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME　129　(3)　449-453　2007/08

DOI： 10.1115/1.2748825 　

ISSN： 0094-9930

フラーレンを使ったプラズマ溶射法による鉄基板上への炭素皮膜の合成

大場建穂, 吉見享祐, 丸山公一, 藤原正志

日本学術振興会耐熱金属材料第123委員会研究報告　48　(2)　161-170　2007/07

Deformation-induced nanoscale dynamic transformation studies in Zr-Al-Ni-pd and Zr-Al-Ni-Cu bulk metallic glasses Peer-reviewed

Junji Saida, Hidemi Kato, Albertus Deny Heri Setyawan, Kyosuke Yoshimi, Akihisa Inoue

MATERIALS TRANSACTIONS　48　(6)　1327-1335　2007/06

DOI： 10.2320/matertrans.MF200615 　

ISSN： 1345-9678

eISSN： 1347-5320

Synthesis of Mo-Si-B in situ composites by mechanical alloying Peer-reviewed

Akira Yamauchi, Kyosuke Yoshimi, Kazuya Kurokawa, Shuji Hanada

JOURNAL OF ALLOYS AND COMPOUNDS　434　420-423　2007/05

DOI： 10.1016/j.jallcom.2006.08.218 　

ISSN： 0925-8388

eISSN： 1873-4669

Multiregion analysis of creep rupture data of 316 stainless steel Peer-reviewed

Kouichi Maruyama, Hassan Ghassemi Armaki, Kyosuke Yoshimi

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING　84　(3)　171-176　2007/03

DOI： 10.1016/j.ijpvp.2006.09.015 　

ISSN： 0308-0161

Supersaturated vacancies and vacancy complexes in rapidly solidified B2 aluminide ribbons Peer-reviewed

Ryusuke Nakamura, Kyosuke Yoshimi, Sadahiro Tsurekawa

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　449　1036-1040　2007/03

DOI： 10.1016/j.msea.2006.07.030 　

ISSN： 0921-5093

Oxidation behavior of Mo-Si-B In-situ composites Peer-reviewed

Akira Yamauchi, Kyosuke Yoshimi, Yoshihiro Murakami, Kazuya Kurokawa, Shuji Hanada

Solid State Phenomena　127　215-220　2007

DOI： 10.4028/www.scientific.net/SSP.127.215 　

ISSN： 1662-9779

eISSN： 1662-9779

TEM observation of vacancy clustering process in FeAl single crystal Peer-reviewed

Masafumi Tsunekane, Kyosuke Yoshimi, Kouichi Maruyama

ADVANCED INTERMETALLIC-BASED ALLOYS　980　69-+　2007

ISSN： 0272-9172

Room temperature plasticity of Zr65Al7.5Ni10Cu17.5-xPdx bulk metallic glasses Peer-reviewed

Kyosuke Yoshimi, Hidemi Kato, Junji Saida, Akihisa Inoue

THERMEC 2006, PTS 1-5　539-543　2054-+　2007

ISSN： 0255-5476

Effects of samarium on microstructure and mechanical properties of Mg-Al-Ca alloys Peer-reviewed

H. T. Son, J. S. Lee, Y. K. Kim, I. H. Oh, K. Yoshimi, K. Maruyama

ECO-MATERIALS PROCESSING AND DESIGN VIII　544-545　295-+　2007

ISSN： 0255-5476

Oxidation behavior of Mo-Si-B in-situ composites Peer-reviewed

Akira Yamauchi, Kyosuke Yoshimi, Yoshihiro Murakami, Kazuya Kurokawa, Shuji Hanada

DESIGNING OF INTERFACIAL STRUCTURES IN ADVANCED MATERIALS AND THEIR JOINTS　127　215-+　2007

DOI： 10.4028/www.scientific.net/SSP.127.215 　

ISSN： 1012-0394

Control of Misfit Dislocations on Gamma/Alpha2 Boundaries by Alloy Addition to Lamellar TiAl Alloy Peer-reviewed

Yasunari Toriyama, Hanliang Zhu, Kyosuke Yoshimi, Kouichi Maruyama

Ti-2007 Science and Technology (JIM)　655-658　2007

Microstructure and Mechanical Properties of Mg-Al-Ca-Sm alloys at high temperature Peer-reviewed

H. T. Son, J. S. Lee, J. M. Hong, I. H. Oh, K. Yoshimie, K. Maruyama

MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2　345-346　653-+　2007

ISSN： 1013-9826

Attempt to Control Spatial Distribution of Nano-Gold Particles Using Nanoporous Surfaces of FeAl Single Crystal Peer-reviewed

Masafumi Tsunekane, Kyosuke Yoshimi, Kouichi Maruyama

ADVANCED MATERIALS AND PROCESSING　26-28　185-+　2007

DOI： 10.4028/www.scientific.net/AMR.26-28.185 　

ISSN： 1022-6680

Microstructure and Dynamic Ultra-micro Hardness of the as-Cast and Extruded Mg-Al-Ca-Sm Alloys Peer-reviewed

Hyeon-Taek Son, Jae-Seol Lee, Ji-Min Hong, Dae-Guen Kim, K. Yoshimi, K. Maruyama

ADVANCED MATERIALS AND PROCESSING　26-28　153-+　2007

DOI： 10.4028/www.scientific.net/AMR.26-28.153 　

ISSN： 1022-6680

Creep damage evaluation by hardness in advanced high Cr ferritic steels Peer-reviewed

Hassan Ghassemi Armaki, Kyosuke Yoshimi, Kouichi Maruyama, Mitsuru Yoshizawa, Masaaki Igarashi

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3　561-565　2217-+　2007

ISSN： 0255-5476

Microstructure of rapidly solidified Co-Sn-Ti and Co-Sn-Si alloys Peer-reviewed

Sachiko Fujisawa, Kyosuke Yoshimi, Hidemi Kato, Kouichi Maruyama

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3　561-565　1357-+　2007

ISSN： 0255-5476

High temperature oxidation behavior of MoSi2 in low pressure atmosphere Peer-reviewed

Akira Ibano, Kyosuke Yoshimi, Akira Yamauchi, Rong Tu, Kouichi Maruyama, Kazuya Kurokawa, Takashi Goto

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3　561-565　427-430　2007

ISSN： 0255-5476

Effects of Nb and Zr addition on introduction of misfit dislocations onto alpha(2)/gamma lamellar boundaries and change of lattice misfit in fully lamellar TiAl alloy Peer-reviewed

Yasunari Toriyama, Kyosuke Yoshimi, Kouichi Maruyama

JOURNAL OF THE JAPAN INSTITUTE OF METALS　71　(1)　96-102　2007/01

DOI： 10.2320/jinstmet.71.96 　

ISSN： 0021-4876

eISSN： 1880-6880

SPS法によって合成したAl添加およびB添加MoSi₂多結晶体の1500℃・低圧下での耐酸化特性

伊庭野朗, 吉見享祐, 丸山公一, 山内啓, 黒川一哉, 塗溶, 後藤孝

日本学術振興会耐熱金属材料第123委員会研究報告　47　(3)　381-392　2006/11

Nanoscale surface self-patterning of FeAl single crystals by vacancy absorption process Peer-reviewed

K. Yoshimi, M. Tsunekane, R. Nakamura, A. Yamauchi, S. Hanada

APPLIED PHYSICS LETTERS　89　(7)　073110　2006/08

DOI： 10.1063/1.2245215 　

ISSN： 0003-6951

Thermal analysis of lattice defects in LaNi5 Peer-reviewed

R Nakamura, K Asano, K Yoshimi, Y Iijima

JOURNAL OF ALLOYS AND COMPOUNDS　413　(1-2)　211-213　2006/03

DOI： 10.1016/j.jallcom.2005.03.112 　

ISSN： 0925-8388

Preparation of recycle typed iron aluminide based composite and its wear resistant property

Takaomi Itoi, Yoshiki Watanabe, Kyosuke Yoshimi, Hisamichi Kimura, Mitsuji Hirohasi

The Proceedings of the Materials and processing conference　2006.14　261-262　2006

DOI： 10.1299/jsmemp.2006.14.261 　

eISSN： 2424-287X

MESO-STRUCTURE CONTROLLING OF B2-TYPE FEAL BY VACANCY ABSORPTION PROCESS Invited Peer-reviewed

K. Yoshimi

PROCESSING AND FABRICATION OF ADVANCED MATERIALS XV　307-330　2006

Characteristics of shear bands and fracture surfaces of Zr65Al7.5Ni10Pd17.5 bulk metallic glass Peer-reviewed

K Yoshimi, H Kato, J Saida, A Inoue

MATERIALS TRANSACTIONS　46　(12)　2870-2874　2005/12

DOI： 10.2320/matertrans.46.2870 　

ISSN： 1345-9678

eISSN： 1347-5320

Vacancy clustering and relaxation behavior in rapidly solidified B2FeAl ribbons Peer-reviewed

T Haraguchi, K Yoshimi, MH Yoo, H Kato, S Hanada, A Inoue

ACTA MATERIALIA　53　(13)　3751-3764　2005/08

DOI： 10.1016/j.actamat.2005.04.027 　

ISSN： 1359-6454

Substructure development in rapidly solidified B2-type TiCo ribbons Peer-reviewed

K Yoshimi, M Sung, S Tsurekawa, A Yamauchi, R Nakamura, S Hanada, K Kawahara, T Watanabe

PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5　475-479　(1)　849-852　2005

ISSN： 0255-5476

Effect of heat treatments on microstructure of rapidly solidified TiCo ribbons Peer-reviewed

K Yoshimi, A Yamauchi, R Nakamura, S Tsurekawa, S Hanada

Integrative and Interdisciplinary Aspects of Intermetallics　842　449-454　2005

ISSN： 0272-9172

Thermal analysis of relaxation processes of supersaturated vacancies in B2-type aluminides Peer-reviewed

R Nakamura, K Yoshimi, A Yamauchi, S Hanada

Integrative and Interdisciplinary Aspects of Intermetallics　842　535-540　2005

ISSN： 0272-9172

High temperature oxidation behavior of Al added Mo/Mo5SiB2 in-situ composites Peer-reviewed

A Yamauchi, K Yoshimi, S Hanada

INTEGRATIVE AND INTERDISCIPLINARY ASPECTS OF INTERMETALLICS　842　315-320　2005

ISSN： 0272-9172

Surface mesostructure change of B2-type FeAl single crystals by condensation of supersaturated thermal vacancies Peer-reviewed

K Yoshimi, T Kobayashi, A Yamauchi, T Haraguchi, S Hanada

PHILOSOPHICAL MAGAZINE　85　(2-3)　331-344　2005/01

DOI： 10.1080/14786430412331315743 　

ISSN： 1478-6435

Oxidation Resistance and Scale Structure of Al-added Mo/Mo5SiB2 In-situ Composites

Akira Yamauchi, Kyosuke Yoshimi, Shuji Hanada

Research Report of the 123 Comittee for High Temperature Metallic Materials　45　(2)　201-208　2004/07

Microstructure and orientation distribution of aragonite crystals in nacreous layer of pearl shells Peer-reviewed

K Yoshimi, M Shoji, T Ogawa, A Yamauchi, T Naganuma, K Muramoto, S Hanada

MATERIALS TRANSACTIONS　45　(4)　999-1004　2004/04

DOI： 10.2320/matertrans.45.999 　

ISSN： 1345-9678

eISSN： 1347-5320

Microstructure and High Temperature Performance of Mo/Mo5SiB2 In-situ Composites

Kyosuke Yoshimi, Akira Yamauchi, Masafumi Tsunekane, Shuji Hanada

Research Report of the 123 Comittee for High Temperature Metallic Materials　45　(1)　89-94　2004/03

Surface oxidation of Fe-48 mol % Al single crystal under a high vacuum Peer-reviewed

A Yamauchi, K Yoshimi, T Haraguchi, S Hanada

MATERIALS TRANSACTIONS　45　(2)　365-368　2004/02

DOI： 10.2320/matertrans.45.365 　

ISSN： 1345-9678

eISSN： 1347-5320

Relaxation process in quenched-in vacancies during annealing in B2FeAl single crystals Peer-reviewed

T Haraguchi, F Hori, K Yoshimi, S Hanada, R Oshima, A Iwase, H Hashimoto

POSITRON ANNIHILATION, ICPA-13, PROCEEDINGS　445-6　99-101　2004

ISSN： 0255-5476

Observation of Shell Structure from the Viewpoint of Materials Science

Kyosuke Yoshimi, Mayumi Shoji, Akira Yamauchi, Tomohisa Ogawa, Takako Naganuma, Koji Muramoto

Boundary　19　(9)　8-11　2003/09

Thermal expansion, strength and oxidation resistance of Mo/Mo5SiB2 in-situ composites at elevated temperatures Peer-reviewed

K Yoshimi, S Nakatani, N Nomura, S Hanada

INTERMETALLICS　11　(8)　787-794　2003/08

DOI： 10.1016/S0966-9795(03)00073-6 　

ISSN： 0966-9795

Internal-friction study of the interstitial-substitutional effect on the deformation behaviour of Nb-O, Nb-Ta-O and Nb-Mo-O single crystals Peer-reviewed

Eri Miura, Ken'ichi Ota, Kyosuke Yoshimi, Shuji Hanada

Philosophical Magazine　83　(20)　2343-2357　2003/07/11

DOI： 10.1080/0141861031000113334 　

ISSN： 1478-6435

Determination of density and vacancy concentration in rapidly solidified FeAl ribbons Peer-reviewed

T Haraguchi, K Yoshimi, H Kato, S Hanada, A Inoue

INTERMETALLICS　11　(7)　707-711　2003/07

DOI： 10.1016/S0966-9795(03)00066-9 　

ISSN： 0966-9795

Microstructure and oxidation resistance of a plasma sprayed Mo-Si-B multiphase alloy coating Peer-reviewed

N Nomura, T Suzuki, K Yoshimi, S Hanada

INTERMETALLICS　11　(7)　735-742　2003/07

DOI： 10.1016/S0966-9795(03)00069-4 　

ISSN： 0966-9795

Internal-friction study of the interstitial-substitutional effect on the deformation behaviour of Nb-O, Nb-Ta-O and Nb-Mo-O single crystals Peer-reviewed

E Miura, K Ota, K Yoshimi, S Hanada

PHILOSOPHICAL MAGAZINE　83　(20)　2343-2357　2003/07

DOI： 10.1080/0141861031000113334 　

ISSN： 1478-6443

Nanopore formation in B2 iron aluminide by vacancy clustering Peer-reviewed

T Haraguchi, K Yoshimi, H Kato, S Hanada, A Inoue

SURFACE ENGINEERING: IN MATERIALS SCIENCE II　111-120　2003

Nanoporous behavior induced by excess vacancy clustering in rapidly-solidified B2FeAl ribbons Peer-reviewed

T Haraguchi, K Yoshimi, MH Yoo, H Kato, S Hanada, A Inoue

DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS　753　273-278　2003

ISSN： 0272-9172

Nanostructure of surface formed by vacancy clustering in FeAl Peer-reviewed

K Yoshimi, T Haraguchi, T Ogawa, T Kobayashi, MS Sung, S Hanada

SELF-ASSEMBLED NANOSTRUCTURED MATERIALS　775　307-312　2003

ISSN： 0272-9172

Composition dependence of Young's modulus in beta titanium binary alloys Peer-reviewed

S Hanada, T Ozaki, E Takahashi, S Watanabe, K Yoshimi, T Abumiya

THERMEC'2003, PTS 1-5　426-4　3103-3108　2003

ISSN： 0255-5476

Effect of excess vacancies on hydrogen absorption-desorption characteristics in rapidly solidified B2TiCo Peer-reviewed

M Sung, T Haraguchi, K Yoshimi, S Hanada

THERMEC'2003, PTS 1-5　426-4　3727-3731　2003

ISSN： 0255-5476

Joining of oxidation-resistant Mo-Si-B multiphase alloy to heat-resistant Mo-ZrC in-situ composite Peer-reviewed

N Nomura, T Suzuki, S Nakatani, K Yoshimi, S Hanada

INTERMETALLICS　11　(1)　51-56　2003/01

DOI： 10.1016/S0966-9795(02)00166-8 　

ISSN： 0966-9795

Nano-structure Controlling of Metal Surfaces and Synthesis of Nano-metal Vessels

Kyosuke Yoshimi, Tomohide Haraguchi, Shuji Hanada

Boudary　18　(12)　7-9　2002/12

ISSN： 0916-2402

Nanoporous surfaces of FeAl formed by vacancy clustering Peer-reviewed

K Yoshimi, S Hanada, T Haraguchi, H Kato, T Itoi, A Inoue

MATERIALS TRANSACTIONS　43　(11)　2897-2902　2002/11

DOI： 10.2320/matertrans.43.2897 　

ISSN： 1345-9678

eISSN： 1347-5320

Deformation behavior Of Mo5Si3 single crystal at high temperatures Peer-reviewed

K Yoshimi, MH Yoo, AA Wereszczak, SM Borowicz, EP George, E Miura, S Hanada

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　329　228-234　2002/06

DOI： 10.1016/S0921-5093(01)01578-7 　

ISSN： 0921-5093

Oxygen-molybdenum interaction with dislocations in Nb-Mo single crystals at elevated temperatures Peer-reviewed

E Miura, K Yoshimi, S Hanada

ACTA MATERIALIA　50　(11)　2905-2916　2002/06

DOI： 10.1016/S1359-6454(02)00115-5 　

ISSN： 1359-6454

Oxidation behavior of Mo5SiB2-based alloy at elevated temperatures Peer-reviewed

K Yoshimi, S Nakatani, T Suda, S Hanada, H Habazaki

INTERMETALLICS　10　(5)　407-414　2002/05

DOI： 10.1016/S0966-9795(02)00013-4 　

ISSN： 0966-9795

eISSN： 1879-0216

Synthesis and high temperature oxidation of Mo-Si-B-O pseudo in situ composites Peer-reviewed

Kyosuke Yoshimi, Shinya Nakatani, Shuji Hanada, Se-Hyun Ko, Yong-Ho Park

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS　3　(2)　181-192　2002/03

DOI： 10.1016/S1468-6996(02)00015-3 　

ISSN： 1468-6996

eISSN： 1878-5514

High Temperature Oxidation Resistance of Mo-Si-B Intermetallics Based Pseudo In-situ Composites

K. Yoshimi, S. Nakatani, T. Haraguchi, S. Hanada

Proceedings of 9th Annual International Conference on Composites Engineering　879-880　2002

Yielding and flow behavior of Mo₅Si₃ single crystals Peer-reviewed

K. Yoshimi, M.H. Yoo, A.A. Wereszczak, S.M. Borowicz, E.P. George, R.H. Zee

Scripta Materialia　45　(11)　1321-1326　2001/11

DOI： 10.1016/S1359-6462(01)01170-8 　

Processing and Oxidation Behavior of Mo-Si-B-O Pseudo In-situ Composites

Kyosuke Yoshimi, Shuji Hanada, Shinya Nakatani, Yong-Ho Park, Se-Hyon Ko

第45回日本学術会議材料研究連合会講演会講演論文集　101-102　2001/09

Solid-solution strengthening by oxygen in Nb-Ta and Nb-Mo single crystals Peer-reviewed

E Miura, K Yoshimi, S Hanada

PHYSICA STATUS SOLIDI A-APPLIED RESEARCH　185　(2)　357-372　2001/06

DOI： 10.1002/1521-396X(200106)185:2<357::AID-PSSA357>3.0.CO;2-9 　

ISSN： 0031-8965

STRUCTURAL IN-SITU COMPOSITES AT VERY HIGH TEMPERATURES Peer-reviewed

S. Hanada, T. Suzuki, K. Yoshimi, N. Nomura

The Second International Conference on Light Materials for Transportation Systems (LiMAT-2001)　1　31-38　2001

Strength and Oxidation of Mo₅SiB₂-based In-situ Composites at High Temperatures Peer-reviewed

K. Yoshimi, S. Nakatani, T. Suda, S. Hanada

Transactions of the Materials Research Society of Japan　26　(1)　141-144　2001

Microstructures and Mechanical Properties of Eutectic Mo-XC(X=Ti, Zr, Hf)In-situ Composites Peer-reviewed

Teppei Suzuki, Hiroaki Matsumoto, Naoyuki Nomura, Kyosuke Yoshimi, Shuji Hanada

Transactions of the Materials Research Society of Japan　26　(1)　307-310　2001

Design of Mo-Si-B-O pseudo in-situ composites for high temperature applications Peer-reviewed

S Nakatani, K Yoshimi, S Hanada, SH Ko, YH Park

PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II　971-974　2001

Analysis of protective oxide scale on Mo5SiB2-based alloy oxidized at high temperature Peer-reviewed

K Yoshimi, S Hanada, E Aoyagi

PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II　975-978　2001

Dissolution of molybdenum-silicon (-boron) alloys using a mixture of sulfuric, nitric and hydrofluoric acids and a sequential correction method for ICP-AES analysis Peer-reviewed

Y Danzaki, K Wagatsuma, T Syogji, K Yoshimi

FRESENIUS JOURNAL OF ANALYTICAL CHEMISTRY　369　(2)　184-186　2001/01

DOI： 10.1007/s002160000616 　

ISSN： 0937-0633

Mechanical properties of Mo-Nb-TiC in-situ composites synthesized by hot-pressing Peer-reviewed

N Nomura, K Yoshimi, S Hanada

MATERIALS TRANSACTIONS JIM　41　(12)　1599-1604　2000/12

DOI： 10.2320/matertrans1989.41.1599 　

ISSN： 0916-1821

Fracture toughness improvement of TiC by Nb and Mo precipitates Peer-reviewed

N Nomura, K Yoshimi, T Konno, S Hanada

JOURNAL OF MATERIALS SCIENCE LETTERS　19　(21)　1879-1881　2000/11

DOI： 10.1023/A:1006735624221 　

ISSN： 0261-8028

An empirical model for ideal work of adhesion: transition-metal aluminides and silicides Peer-reviewed

MH Yoo, K Yoshimi

INTERMETALLICS　8　(9-11)　1215-1224　2000/09

DOI： 10.1016/S0966-9795(00)00082-0 　

ISSN： 0966-9795

eISSN： 1879-0216

Microstructure and creep of Mo-ZrC in-situ composite Peer-reviewed

T Suzuki, N Nomura, K Yoshimi, S Hanada

MATERIALS TRANSACTIONS JIM　41　(9)　1164-1167　2000/09

DOI： 10.2320/matertrans1989.41.1164 　

ISSN： 0916-1821

Materials Flow Function and Point Defect Engineering

Kyosuke Yoshimi

Boundary　16　(9)　4-5　2000/09

Deformation and Fracture of TiC/Mo(Nb)In-situ Composites Peer-reviewed

Shuji Hanada, Naoyuki Nomura, Kyosuke Yoshimi

Properties of Complex Inorganic Solids 2　393-400　2000

Mechanical properties and oxidation resistance of Ir-added FeAl alloys Peer-reviewed

H Hosoda, K Yoshimi, S Miyazaki, S Watanabe, S Hanada

IRIDIUM　295-301　2000

Defect and Strength Properties of D8m-type Mo5Si3 Single Crsytal

K. Yoshimi, M. H. yoo, A. A. Wereszczak, S. M. Borowicz, E, P. George, E. Miura, S. Hanada

Abstract Book of 1st Asian Conf. Cryst. Growth Cryst. Tech.　W-P-126　2000

High-temperature strength and room-temperature fracture toughness of Mo-ZrC in-situ composites with hyper-eutectic structure Peer-reviewed

Teppei Suzuki, Naoyuki Nomura, Kyosuke Yoshimi, Shuji Hanada

Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals　64　(11)　1082-1088　2000

DOI： 10.2320/jinstmet1952.64.11_1082 　

ISSN： 0021-4876

Microstructure and Strength of TiC/Mo-Nb In-situ Composites

Naoyuki Nomura, Kyosuke Yoshimi, Shuji Hanada

Research Report of the 123 Comittee for High Temperature Metallic Materials　40　(3)　365-368　1999/11

Dislocation stability and deformation mechanisms of iron aluminides and silicide Peer-reviewed

MH Yoo, K Yoshimi, S Hanada

ACTA MATERIALIA　47　(13)　3579-3588　1999/10

DOI： 10.1016/S1359-6454(99)00221-9 　

ISSN： 1359-6454

Effect of oxygen on yield stress and slip plane in Nb, Nb-Ta and Nb-Mo single crystals Peer-reviewed

E Miura, K Yoshimi, S Hanada

MATERIALS TRANSACTIONS JIM　40　(5)　365-368　1999/05

DOI： 10.2320/matertrans1989.40.365 　

ISSN： 0916-1821

Ideal Cleavage Fracture of Transition-Metal Silicides : A Comparison Analysis Peer-reviewed

M. H. Yoo, K. Yoshimi

High Temperature Order Intermetallic Alloys VIII MRS Symposium Proceedings　552　KK6.6.1-KK6.6.6　1999

Effect of wet environment on hardness and yield stress of B2 Fe-Al alloys Peer-reviewed

H Hosoda, K Yoshimi, K Inoue, S Hanada

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　258　(1-2)　135-145　1998/12

ISSN： 0921-5093

Room temperature tensile properties of Fe-Al single crystals strengthened by excess vacancies Peer-reviewed

K Yoshimi, Y Saeki, MH Yoo, S Hanada

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　258　(1-2)　75-83　1998/12

ISSN： 0921-5093

Slip band propagation and slip vector transition in B2 FeAl single crystals Peer-reviewed

K Yoshimi, MH Yoo, S Hanada

ACTA MATERIALIA　46　(16)　5769-5776　1998/10

DOI： 10.1016/S1359-6454(98)00228-6 　

ISSN： 1359-6454

Room-temperature serrated-flow behavior in Fe-rich FeAl under vacancy supersaturation Peer-reviewed

K Yoshimi, MH Yoo, S Hanada

INTERSTITIAL AND SUBSTITUTIONAL SOLUTE EFFECTS IN INTERMETALLICS　39-49　1998

Microstructure and Mechanical Properties of Nb-Mo-TiC in-situ Composites Peer-reviewed

N. Nomura, K. Yoshimi, T. Konno, S. Hanada

Proceedings of the 3rd Pacific Rim International Conference on Advanced Materials and Processing (PRICM 3)　543-548　1998

The strength properties of iron aluminides Invited Peer-reviewed

K Yoshimi, S Hanada

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY　49　(8)　46-49　1997/08

DOI： 10.1007/BF02914403 　

ISSN： 1047-4838

Yield stress anomaly in B2 FeAl

K. Yoshimi, S. Hanada, M. H. Yoo

Materials Research Society Symposium - Proceedings　460　313-324　1997

ISSN： 0272-9172

Superplasticity in intermetallics Peer-reviewed

S Hanada, WY Kim, K Yoshimi, K Sato, T Sakai

THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II　1883-1889　1997

Yield stress anomaly in B2 FeAl Invited Peer-reviewed

K Yoshimi, S Hanada, MH Yoo

HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VII　460　313-324　1997

ISSN： 0886-7860

Transmission electron microscopic observation of thermally introduced planar faults in Fe-35 mol.% Al alloys Peer-reviewed

K Yoshimi, S Hanada, T Onuma, MH Yoo

PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES　73　(2)　443-456　1996/02

DOI： 10.1080/01418619608244393 　

ISSN： 0141-8610

Tensile properties of B2-type Fe-39mol%Al single crystals at elevated temperatures Peer-reviewed

K Yoshimi, S Hanada, MH Yoo

INTERMETALLICS　4　(2)　159-168　1996

DOI： 10.1016/0966-9795(95)00032-1 　

ISSN： 0966-9795

On lattice defects and strength anomaly of B2-type FeAl Invited Peer-reviewed

K Yoshimi, S Hanada, MH Yoo

INTERMETALLICS　4　(Suppl.1)　S159-S169　1996

DOI： 10.1016/0966-9795(96)80194-4 　

ISSN： 0966-9795

Fabrication and microstructure controlling of Nb3Al based alloy by rotating electrode process Peer-reviewed

Naoyuki Nomura, Kyousuke Yoshimi, Shuji Hanada, Tatsuo Tabaru, Hisamichi Kimura, Akihisa Inoue

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy　43　(2)　256-261　1996

DOI： 10.2497/jjspm.43.256 　

ISSN： 0532-8799

Microstructure and creep resistance of Nb3Al/Nb in-situ composites Peer-reviewed

N Nomura, K Yoshimi, S Hanada

STRUCTURAL INTERMETALLICS 1997　923-928　1996

YIELDING AND PLASTIC-FLOW BEHAVIOR OF B2-TYPE FE-39.5 MOL.PERCENT AL SINGLE-CRYSTALS IN COMPRESSION Peer-reviewed

K YOSHIMI, S HANADA, MH YOO

ACTA METALLURGICA ET MATERIALIA　43　(11)　4141-4151　1995/11

DOI： 10.1016/0956-7151(95)00098-G 　

ISSN： 0956-7151

EFFECT OF APB TYPE ON TENSILE PROPERTIES OF CR ADDED FE3AL WITH DO3 STRUCTURE Peer-reviewed

K YOSHIMI, H TERASHIMA, S HANADA

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　194　(1)　53-61　1995/04

DOI： 10.1016/0921-5093(94)09659-7 　

ISSN： 0921-5093

STRENGTH ANOMALY IN B2 FEAL SINGLE CRYSTALS Invited Peer-reviewed

K YOSHIMI, N MATSUMOTO, S HANADA, MH YOO

PROCESSING, PROPERTIES, AND APPLICATIONS OF IRON ALUMINIDES　205-216　1994

EFFECT OF FROZEN-IN VACANCIES ON HARDNESS AND TENSILE PROPERTIES OF POLYCRYSTALLINE B2 FEAL Peer-reviewed

K YOSHIMI, S HANADA, H TOKUNO

MATERIALS TRANSACTIONS JIM　35　(1)　51-57　1994/01

DOI： 10.2320/matertrans1989.35.51 　

ISSN： 0916-1821

Mechanical Properties in B2 FeAl without Frozen-in Vacancies Peer-reviewed

K. Yoshimi, N. Matsumoto, S. Hanada, S. Watanabe

Proceedings of the 3rd Japan International SAMPE Symposium　(2)　1404-1409　1993/12

POSITIVE TEMPERATURE-DEPENDENCE OF YIELD STRESS IN B2 FEAL Peer-reviewed

K YOSHIMI, S HANADA

STRUCTURAL INTERMETALLICS　475-482　1993

MEASUREMENT OF RECRYSTALLIZATION TEXTURE IN HCP STRUCTURES BY THE SELECTED AREA CHANNELING PATTERN METHOD Peer-reviewed

K YOSHIMI, S ISHIYAMA, S HANADA, Y MURAYAMA

PHYSICA STATUS SOLIDI A-APPLIED RESEARCH　124　(1)　81-94　1991/03

DOI： 10.1002/pssa.2211240106 　

ISSN： 0031-8965

ANALYSIS OF ORIENTATION DISTRIBUTION IN YBA2CU3O7-X POLYCRYSTALS BY ELECTRON CHANNELING PATTERNS Peer-reviewed

WJ KANG, K YOSHIMI, S HANADA, S SAITO, Y MURAYAMA, S HAYASHI, A NAGATA

JOURNAL OF APPLIED PHYSICS　68　(12)　6341-6346　1990/12

DOI： 10.1063/1.346879 　

ISSN： 0021-8979

RELATIONSHIP BETWEEN TEXTURE AND GRAIN-BOUNDARY CHARACTER DISTRIBUTION IN RECRYSTALLIZED PURE TITANIUM Peer-reviewed

K YOSHIMI, Y MURAYAMA, S HANADA, S ISHIYAMA

JOURNAL OF THE JAPAN INSTITUTE OF METALS　54　(9)　962-969　1990/09

DOI： 10.2320/jinstmet1952.54.9_962 　

ISSN： 0021-4876

eISSN： 1880-6880

TEXTURE AND GRAIN-BOUNDARY CHARACTER DISTRIBUTION (GBCD) IN RAPIDLY SOLIDIFIED AND ANNEALED FE-6.5 MASS-PERCENT-SI RIBBONS Peer-reviewed

T WATANABE, K ARAI, K YOSHIMI, H OIKAWA

PHILOSOPHICAL MAGAZINE LETTERS　59　(2)　47-52　1989/02

DOI： 10.1080/09500838908214776 　

ISSN： 0950-0839