-
博士(工学)(東北大学)
Details of the Researcher
Research Areas 1
-
Nanotechnology/Materials / Structural and functional materials /
Awards 7
-
第71回日本金属学会論文賞(物性部門)
2023/09 日本金属学会 Ultra-High Mixing Entropy Alloys with Single bcc, hcp, or fcc Structure in Co-Cr-V-Fe-X (X = Al, Ru, or Ni) Systems Designed with Structure-Dependent Mixing Entropy and Mixing Enthalpy of Constituent Binary Equiatomic Alloys
-
第80回 日本金属学会功績賞
2022/03 公益社団法人日本金属学会 金属のナノポーラス化技術開発とその応用に関する研究
-
第68回 日本金属学会論文賞 物性部門
2020/09 公益社団法人日本金属学会 Solid Solutions with bcc, hcp, and fcc Structures Formed in a Composition Line in Multicomponent Ir-Rh-Ru-W-Mo System
-
第68回 日本金属学会論文賞 材料プロセシング部門
2020/09 公益社団法人日本金属学会 High-Entropy Alloys with Hexagonal Close-Packed Structure in Ir26Mo20Rh22.5Ru20W11.5 and Ir25.5Mo20Rh20Ru25W9.5 Alloys Designed by Sandwich Strategy for the Valence Electron Concentration of Constituent Elements in the Periodic Chart
-
研究進歩賞
2019/06 粉体粉末冶金協会
-
論文賞
2009/05 社団法人高温学会
-
MRS 2007 Fall Meeting Best Poster Award
2007/11/28 Materials Research Society Fabrication of Zr-based Metallic Glassy Nanowires and Nanosphere
Papers 174
-
Thermodynamic-kinetic relationship in Pd-based metallic glasses
J.B. Cui, G.H. Xing, Q. Hao, Guo-Jian Lyu, Yun-Jiang Wang, T. Wada, H. Kato, E. Pineda, V.A. Khonik, J.C. Qiao
Scripta Materialia 2026/01
DOI: 10.1016/j.scriptamat.2025.116934
-
Al12.5Hf35Ti35Zr17.5 Alloy with Hexagonal Close-Packed Structure Designed from Al40Ti60 Alloy
Akira Takeuchi, Takeshi Wada
Materials Transactions 66 (1) 17-22 2025/01
DOI: 10.2320/matertrans.MT-M2024137
ISSN: 1345-9678
-
Anelastic relaxation considering physical aging effects in a high-entropy metallic glass
Ya Juan Duan, Zong Rui Xu, Lang Ting Zhang, Mehran Nabahat, Yun Jiang Wang, Yong Yang, Takeshi Wada, Hidemi Kato, Jean Marc Pellerier, Ji Chao Qiao, Eloi Pineda
Science China Technological Sciences 67 (12) 3967-3975 2024/12
DOI: 10.1007/s11431-024-2737-2
ISSN: 1674-7321
eISSN: 1869-1900
-
On the kinetics of structural evolution in metallic glasses
S. Y. Liang, F. Zhu, Yun Jiang Wang, E. Pineda, T. Wada, H. Kato, J. C. Qiao
International Journal of Engineering Science 205 2024/12/01
DOI: 10.1016/j.ijengsci.2024.104146
ISSN: 0020-7225
-
Mechanical memory and relaxation decoupling of metallic glasses in homogenous flow
L. T. Zhang, Y. J. Wang, Y. Yang, T. Wada, H. Kato, J. C. Qiao
International Journal of Mechanical Sciences 281 2024/11/01
DOI: 10.1016/j.ijmecsci.2024.109661
ISSN: 0020-7403
-
Oxidation and Mechanical Properties of Ultrafine-Grained MoSiBTiC Alloy Produced by Rapid Solidification Peer-reviewed
Kyosuke Yoshimi, Naoma Abe, Xi Nan, Shuntaro Ida, Takeshi Wada, Hidemi Kato
Advances in Materials Technology for Power Plants 84871 1279-1288 2024/10/15
Publisher: ASM InternationalDOI: 10.31399/asm.cp.am-epri-2024p1279
ISSN: 2994-4023
eISSN: 2994-4031
-
Self-Supported Metallic Glass as a Highly Durable HER Electrode under Fluctuating Renewable Power
Liandong Li, Bing Lin, Hailong Zhang, Jichao Qiao, Takeshi Wada, Hidemi Kato, Junlei Tang
ACS Sustainable Chemistry and Engineering 12 (39) 14425-14434 2024/09/30
DOI: 10.1021/acssuschemeng.4c04017
eISSN: 2168-0485
-
The high-temperature deformation behavior of Pd20Pt20Cu20Ni20P20 metallic glass Peer-reviewed
J. B. Cui, G. J. Lyu, Q. Hao, F. Zhu, V. A. Khonik, Y. J. Duan, T. Wada, H. Kato, J. C. Qiao
Mechanics of Materials 196 2024/09
DOI: 10.1016/j.mechmat.2024.105078
ISSN: 0167-6636
-
Degradation mechanism of self-supported high-entropy metallic glass cathode in fluctuating renewable energy-powered acid water electrolysis Peer-reviewed
Yangzheng Li, Liandong Li, Bing Lin, Jichao Qiao, Hailong Zhang, Taigang Zhou, Yingying Wang, Junlei Tang, Takeshi Wada, Hidemi Kato
Corrosion Science 236 2024/08/01
DOI: 10.1016/j.corsci.2024.112223
ISSN: 0010-938X
-
Exploring equilibrium conditions in liquid metal dealloying of powders by in situ synchrotron X-ray diffraction Peer-reviewed
Louis Lesage, Christophe Le Bourlot, Eric Maire, Takeshi Wada, Hidemi Kato, Wolfgang Ludwig, Nicolas Mary, Pierre Antoine Geslin
Materialia 36 2024/08
DOI: 10.1016/j.mtla.2024.102177
eISSN: 2589-1529
-
Ti/Mg dissimilar joining by eutectic-melting-induced liquid metal dealloying Peer-reviewed
Ohashi, Y., Kurabayashi, K., Wada, T., Kato, H.
Materials and Design 244 2024/08
DOI: 10.1016/j.matdes.2024.113095
ISSN: 1873-4197 0264-1275
-
Accelerated structural ordering during liquid metal dealloying and its effect on thermal coarsening of nanoporous refractory alloys Peer-reviewed
Wada, T., Nakata, A., Song, R., Kato, H.
Scripta Materialia 247 2024/07
DOI: 10.1016/j.scriptamat.2024.116120
ISSN: 1359-6462
-
A diffusion model for liquid metal dealloying. Application to NiCu precursors dealloyed in liquid Ag Peer-reviewed
Lesage, L., Suga, T., Wada, T., Kato, H., Le Bourlot, C., Maire, E., Mary, N., Geslin, P.-A.
Acta Materialia 272 2024/06
DOI: 10.1016/j.actamat.2024.119908
ISSN: 1359-6454
-
Bicontinuous microstructure formation of immiscible phases by the liquid metal replacement method and its application to Ti/Mg dissimilar joining Peer-reviewed
Yusuke Ohashi, Kota Kurabayashi, Rui Yamada, Takeshi Wada, Hidemi Kato
Journal of Alloys and Compounds 983 2024/05/05
DOI: 10.1016/j.jallcom.2024.173857
ISSN: 0925-8388
-
金属溶湯脱成分法を用いたポーラス金属開発の新展開 Invited
加藤秀実, 和田武
金属(アグネ技術センター) 94 (4) 301-310 2024/04
-
High entropy Fe–Mn–Ni–Co–Al–C alloys from an industrial steel Peer-reviewed
Victor O. Semin, Jing Jiang, Erzhena N. Zanaeva, Daixiu Wei, Rui Yamada, Takeshi Wada, Hidemi Kato, Dmitri V. Louzguine-Luzgin
Materials Science and Technology (United Kingdom) 40 (4) 275-287 2024/03
DOI: 10.1177/02670836231214399
ISSN: 0267-0836
eISSN: 1743-2847
-
Extended Valence Electron Concentration Analysis for Designing Single-Phase High-Entropy Alloys Peer-reviewed
Akira Takeuchi, Takeshi Wada
MATERIALS TRANSACTIONS 65 (3) 253-261 2024/03/01
Publisher: Japan Institute of MetalsDOI: 10.2320/matertrans.mt-m2023161
ISSN: 1345-9678
eISSN: 1347-5320
-
Unraveling influence of entropy on thermal stability and glass-forming ability of (Fe, Co)–(Ta)–B amorphous alloys: Insights from local atomic structure simulated by ab initio molecular dynamics Peer-reviewed
Liliang Pan, Yanhui Li, Mao Cheng, Shuang Ma, Xinyu Duan, Takeshi Wada, Hidemi Kato, Wei Zhang
Intermetallics 166 2024/03
DOI: 10.1016/j.intermet.2023.108179
ISSN: 0966-9795
-
Connection between Mechanical Relaxation and Equilibration Kinetics in a High-Entropy Metallic Glass Peer-reviewed
Y. J. Duan, M. Nabahat, Yu Tong, L. Ortiz-Membrado, E. Jiménez-Piqué, Kun Zhao, Yun Jiang Wang, Y. Yang, T. Wada, H. Kato, J. M. Pelletier, J. C. Qiao, E. Pineda
Physical Review Letters 132 (5) 2024/02/02
DOI: 10.1103/PhysRevLett.132.056101
ISSN: 0031-9007
eISSN: 1079-7114
-
Synthesis of New Nanoporous Metals by Liquid Metal Dealloying,金属溶湯脱成分による新規ナノポーラス金属作製 Invited
Wada, T., Kato, H.
Journal of the Japan Society for Technology of Plasticity 7 (74) 81-86 2024/02
ISSN: 1882-0166 0038-1586
-
Mechanically Robust Self-Organized Crack-Free Nanocellular Graphene with Outstanding Electrochemical Properties in Sodium Ion Battery Peer-reviewed
Wong Young Park, Jiuhui Han, Jongun Moon, Soo Hyun Joo, Takeshi Wada, Yuji Ichikawa, Kazuhiro Ogawa, Hyoung Seop Kim, Mingwei Chen, Hidemi Kato
Advanced Materials 2024
ISSN: 0935-9648
eISSN: 1521-4095
-
Exceptional abrasive wear resistance of immiscible Mg-Fe80Cr20 composites with 3D interconnected structure developed by liquid metal dealloying Peer-reviewed
Seung Yeon Hong, Soo Vin Ha, Chan Woo Jung, Ki Jeong Shin, Jae Hyuk Lee, Jihye Seong, Munsu Choi, Sung Hyuk Park, Takeshi Wada, Hidemi Kato, Hyoung Seop Kim, Soo Hyun Joo
Journal of Alloys and Compounds 968 2023/12/15
DOI: 10.1016/j.jallcom.2023.172019
ISSN: 0925-8388
-
Structural peculiarities of Pd-Cu-Ni-P and Pt-Cu-Ni-P metallic glasses as a reason for their significantly different room-temperature plasticity Peer-reviewed
D. V. Louzguine-Luzgin, E. N. Zanaeva, F. R. Pratama, T. Wada, S. Ito
Scripta Materialia 231 2023/07/01
DOI: 10.1016/j.scriptamat.2023.115468
ISSN: 1359-6462
-
Partial liquid metal dealloying to synthesize nickel-containing porous and composite ferrous and high-entropy alloys Peer-reviewed
Wada, T., Geslin, P.-A., Wei, D., Kato, H.
Communications Materials 4 (1) 2023/06/05
DOI: 10.1038/s43246-023-00374-3
ISSN: 2662-4443
-
Dissimilar Joining of Immiscible Fe–Mg using Solid Metal Dealloying Peer-reviewed
Kota Kurabayashi, Takeshi Wada, Hidemi Kato
Scripta Materialia 230 2023/06
DOI: 10.1016/j.scriptamat.2023.115404
ISSN: 1359-6462
-
Fe20Mo20Ni20Rh20Ru20 and Fe14Mo35Ni15Rh15Ru21 Ultrahigh-Mixing-Entropy Alloys with Single Hexagonal Close-Packed Structure Peer-reviewed
Akira Takeuch, Takeshi Wada, Kenji Amiya, Hidemi Kato, Takeshi Nagase
MATERIALS TRANSACTIONS 2023/02
DOI: 10.2320/matertrans.MT-M2022213
ISSN: 1345-9678
eISSN: 1347-5320
-
Change in local structure and hardness in the amorphization process of Zr45Cu45Al10 alloy by heavy ion irradiation Peer-reviewed
F. Hori, Y. Morikuni, H. Obayashi, A. Iwase, T. Matsui, Y. Kaneno, T. Wada, H. Kato, N. Ishikawa
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 535 11-14 2023/02
DOI: 10.1016/j.nimb.2022.11.007
ISSN: 0168-583X
-
Diffusion of boron in an amorphous iron-boron alloy Peer-reviewed
Takumi Hamaguchi, Ryusuke Nakamura, Kohta Asano, Takeshi Wada, Takeyuki Suzuki
Journal of Non-Crystalline Solids 601 2023/02/01
DOI: 10.1016/j.jnoncrysol.2022.122070
ISSN: 0022-3093
-
Intrinsic Correlation between the Fraction of Liquidlike Zones and the β Relaxation in High-Entropy Metallic Glasses
Y. J. Duan, L. T. Zhang, J. C. Qiao, Yun Jiang Wang, Y. Yang, T. Wada, H. Kato, J. M. Pelletier, E. Pineda, D. Crespo
Physical Review Letters 129 (17) 2022/10/21
DOI: 10.1103/PhysRevLett.129.175501
ISSN: 0031-9007
eISSN: 1079-7114
-
High-entropy design and its influence on glass-forming ability in Zr–Cu-based metallic glass
Y. Ohashi, T. Wada, H. Kato
Journal of Alloys and Compounds 915 2022/09/15
DOI: 10.1016/j.jallcom.2022.165366
ISSN: 0925-8388
-
Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production
Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen, Hidemi Kato
Nature Communications 13 (1) 2022/09/02
Publisher: Springer Science and Business Media LLCDOI: 10.1038/s41467-022-32768-1
eISSN: 2041-1723
-
Inhomogeneous dealloying kinetics along grain boundaries during liquid metal dealloying
S. H. Joo, Y. B. Jeong, T. Wada, I. V. Okulov, H. Kato
Journal of Materials Science and Technology 106 41-48 2022/04
DOI: 10.1016/j.jmst.2021.07.023
ISSN: 1005-0302
-
Analysis of the anelastic deformation of high-entropy Pd20Pt20Cu20Ni20P20 metallic glass under stress relaxation and recovery
Y. J. Duan, L. T. Zhang, T. Wada, H. Kato, E. Pineda, D. Crespo, J. M. Pelletier, J. C. Qiao
Journal of Materials Science and Technology 107 82-91 2022/04
DOI: 10.1016/j.jmst.2021.07.052
ISSN: 1005-0302
-
金属溶湯脱成分によるポーラス金属開発
和田 武, 加藤 秀実
粉体および粉末冶金 69 (1) 27-33 2022/02
-
Development of Porous Metals by Liquid Metal Dealloying,金属溶湯脱成分によるポーラス金属開発
Wada, T., Kato, H.
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 69 (1) 2022
DOI: 10.2497/jjspm.69.27
ISSN: 0532-8799
-
Ultra-High Mixing Entropy Alloys with Single bcc, hcp, or fcc Structure in Co–Cr–V–Fe–X (X = Al, Ru, or Ni) Systems Designed with Structure-Dependent Mixing Entropy and Mixing Enthalpy of Constituent Binary Equiatomic Alloys
Akira Takeuchi, Takeshi Wada, Takeshi Nagase, Kenji Amiya
MATERIALS TRANSACTIONS 2022
Publisher: Japan Institute of MetalsDOI: 10.2320/matertrans.mt-m2022004
ISSN: 1345-9678
eISSN: 1347-5320
-
Os-Free Fe12Ir20Re20Rh20Ru28 High-Entropy Alloy with Single hcp Structure Including Fe from Late Transition Metals
Akira Takeuchi, Takeshi Wada
MATERIALS TRANSACTIONS 63 (1) 7-15 2022
DOI: 10.2320/matertrans.MT-M2021150
ISSN: 1345-9678
eISSN: 1347-5320
-
Decoupling between calorimetric and dynamical glass transitions in high-entropy metallic glasses
Jing Jiang, Zhen Lu, Jie Shen, Takeshi Wada, Hidemi Kato, Mingwei Chen
Nature Communications 12 (1) 2021/12
DOI: 10.1038/s41467-021-24093-w
eISSN: 2041-1723
-
Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying
Yeon Beom Jeong, Takeshi Wada, Soo Hyun Joo, Jeong Min Park, Jongun Moon, Hyoung Seop Kim, Ilya Vladimirovich Okulov, Sung Hyuk Park, Jeong Hun Lee, Ki Buem Kim, Hidemi Kato
Composites Part B: Engineering 225 2021/11/15
DOI: 10.1016/j.compositesb.2021.109266
ISSN: 1359-8368
-
Hierarchical heterostructured FeCr–(Mg–Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying
Yeon Beom Jeong, Takeshi Wada, Soo Hyun Joo, Jeong Min Park, Hyoung Seop Kim, Ilya Vladimirovich Okulov, Ki Buem Kim, Hidemi Kato
Journal of Materials Research and Technology 15 4573-4579 2021/11/01
DOI: 10.1016/j.jmrt.2021.10.080
ISSN: 2238-7854
-
Stress relaxation in high-entropy Pd20Pt20Cu20Ni20P20 metallic glass: Experiments, modeling and theory
Y. J. Duan, J. C. Qiao, T. Wada, H. Kato, E. Pineda, D. Crespo, Yun Jiang Wang
Mechanics of Materials 160 2021/09
DOI: 10.1016/j.mechmat.2021.103959
ISSN: 0167-6636
-
Dynamic mechanical relaxation behavior of Zr35Hf17.5Ti5.5Al12.5Co7.5Ni12Cu10 high entropy bulk metallic glass
L. T. Zhang, Y. J. Duan, T. Wada, H. Kato, J. M. Pelletier, D. Crespo, E. Pineda, J. C. Qiao
Journal of Materials Science and Technology 83 248-255 2021/08/30
DOI: 10.1016/j.jmst.2020.11.074
ISSN: 1005-0302
-
Electrochemically synthesized liquid-sulfur/sulfide composite materials for high-rate magnesium battery cathodes
Kohei Shimokawa, Takuya Furuhashi, Tomoya Kawaguchi, Won Young Park, Takeshi Wada, Hajime Matsumoto, Hidemi Kato, Tetsu Ichitsubo
Journal of Materials Chemistry A 9 (30) 16585-16593 2021/08/14
DOI: 10.1039/d1ta03464b
ISSN: 2050-7488
eISSN: 2050-7496
-
Identifying the high entropy characteristic in La-based metallic glasses
Langting Zhang, Yajuan Duan, Daniel Crespo, Eloi Pineda, Takeshi Wada, Hidemi Kato, Jean Marc Pelletier, Jichao Qiao
Applied Physics Letters 119 (5) 2021/08/02
DOI: 10.1063/5.0059822
ISSN: 0003-6951
-
In situ observation of liquid metal dealloying and etching of porous FeCr by X-ray tomography and X-ray diffraction
Morgane Mokhtari, Christophe Le Bourlot, Jérome Adrien, Anne Bonnin, Wolfgang Ludwig, Pierre Antoine Geslin, Takeshi Wada, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire
Materialia 18 2021/08
DOI: 10.1016/j.mtla.2021.101125
eISSN: 2589-1529
-
Inelastic deformation of metallic glasses under dynamic cyclic loading
Y. J. Duan, J. C. Qiao, T. Wada, H. Kato, Y. J. Wang, E. Pineda, D. Crespo
Scripta Materialia 194 2021/03/15
DOI: 10.1016/j.scriptamat.2020.113675
ISSN: 1359-6462
-
Experimental and molecular dynamics studies of phase transformations during cryogenic thermal cycling in complex TiNi-based crystalline/amorphous alloys
J. Jiang, W. S. Ko, S. H. Joo, D. X. Wei, T. Wada, H. Kato, D. V. Louzguine-Luzgin
Journal of Alloys and Compounds 854 2021/02/15
DOI: 10.1016/j.jallcom.2020.155379
ISSN: 0925-8388
-
Mechanical Properties of FeCr-Based Composite Materials Elaborated by Liquid Metal Dealloying towards Bioapplication
Morgane Mokhtari, Christophe Le Bourlot, Jannick Duchet-Rumeau, Eugénie Godet, Pierre Antoine Geslin, Sylvain Dancette, Takeshi Wada, Hidemi Kato, Eric Maire
Advanced Engineering Materials 22 (12) 2020/12
ISSN: 1438-1656
eISSN: 1527-2648
-
Effect of alloying elements on the microstructure and corrosion behavior of TiZr-based bulk metallic glasses
Aléthéa Liens, Benoît Ter-Ovanessian, Nicolas Courtois, Damien Fabregue, Takeshi Wada, Hidemi Kato, Jérôme Chevalier
Corrosion Science 177 2020/12
DOI: 10.1016/j.corsci.2020.108854
ISSN: 0010-938X
-
Fabrication of multi-blade crystals for hard-X-ray multi-beam imaging system
Wataru Yashiro, Xiaoyu Liang, Wolfgang Voegeli, Takeshi Wada, Hidemi Kato, Kentaro Kajiwara
JAPANESE JOURNAL OF APPLIED PHYSICS 59 (9) 2020/09
DOI: 10.35848/1347-4065/abaac5
ISSN: 0021-4922
eISSN: 1347-4065
-
Novel hierarchical nanoporous graphene nanoplatelets with excellent rate capabilities produced via self-templating liquid metal dealloying
Won Young Park, Takeshi Wada, Soo Hyun Joo, Jiuhui Han, Hidemi Kato
Materials Today Communications 24 2020/09
DOI: 10.1016/j.mtcomm.2020.101120
eISSN: 2352-4928
-
Microstructure and thermoelectric properties of higher manganese silicides fabricated via gas atomization and spark plasma sintering
Lei Liu, Hiraku Oda, Tetsuhiko Onda, Noriharu Yodoshi, Takeshi Wada, Zhong Chun Chen
Materials Chemistry and Physics 249 2020/07/15
DOI: 10.1016/j.matchemphys.2020.122990
ISSN: 0254-0584
-
Corrosion resistance of porous ferritic stainless steel produced by liquid metal dealloying of Incoloy 800 Peer-reviewed
Morgane Mokhtari, Takeshi Wada, Christophe Le Bourlot, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire, Nicolas Mary
Corrosion Science 166 2020/04
DOI: 10.1016/j.corsci.2020.108468
ISSN: 0010-938X
-
Beating Thermal Coarsening in Nanoporous Materials via High-Entropy Design Peer-reviewed
Soo Hyun Joo, Jae Wung Bae, Won Young Park, Yusuke Shimada, Takeshi Wada, Hyoung Seop Kim, Akira Takeuchi, Toyohiko J. Konno, Hidemi Kato, Ilya V. Okulov
Advanced Materials 32 (6) 2020/02/01
ISSN: 0935-9648
eISSN: 1521-4095
-
Novel α + β type Ti-Fe-Cu alloys containing sn with pertinent mechanical properties Peer-reviewed
Vladislav Zadorozhnyy, Sergey V. Ketov, Takeshi Wada, Stefan Wurster, Vignesh Nayak, Dmitri V. Louzguine-luzgin, Jürgen Eckert, Hidemi Kato
Metals 10 (1) 2020/01
DOI: 10.3390/met10010034
eISSN: 2075-4701
-
Selective deposition of platinum hemispheres on the {100} facets of synthetic diamond Peer-reviewed
Boris B. Bokhonov, Dina V. Dudina, Hidemi Kato, Takeshi Wada
Diamond and Related Materials 101 2020/01
DOI: 10.1016/j.diamond.2019.107620
ISSN: 0925-9635
-
Characterization of nanoscale detonation carbon produced in a pulse gas-detonation device Peer-reviewed
A. A. Shtertser, D. K. Rybin, V. Yu Ulianitsky, W. Park, M. Datekyu, T. Wada, H. Kato
Diamond and Related Materials 101 2020/01
DOI: 10.1016/j.diamond.2019.107553
ISSN: 0925-9635
-
Development of porous FeCo by liquid metal dealloying: Evolution of porous morphology and effect of interaction between ligaments and melt Peer-reviewed
Soo Hyun Joo, Takeshi Wada, Hidemi Kato
Materials and Design 180 2019/10/15
DOI: 10.1016/j.matdes.2019.107908
ISSN: 0264-1275
eISSN: 1873-4197
-
Septenary Zr–Hf–Ti–Al–Co–Ni–Cu high-entropy bulk metallic glasses with centimeter-scale glass-forming ability Peer-reviewed
Takeshi Wada, Jing Jiang, Kunio Yubuta, Hidemi Kato, Akira Takeuchi
Materialia 7 2019/09
DOI: 10.1016/j.mtla.2019.100372
eISSN: 2589-1529
-
Phase-field investigation of the coarsening of porous structures by surface diffusion Peer-reviewed
Pierre Antoine Geslin, Mickaël Buchet, Takeshi Wada, Hidemi Kato
Physical Review Materials 3 (8) 2019/08/08
DOI: 10.1103/PhysRevMaterials.3.083401
eISSN: 2475-9953
-
Formation of metallic glass coatings by detonation spraying of a Fe66Cr10Nb5B19 powder Peer-reviewed
Ivanna D. Kuchumova, Igor S. Batraev, Vladimir Yu Ulianitsky, Alexandr A. Shtertser, Konstantin B. Gerasimov, Arina V. Ukhina, Natalia V. Bulina, Ivan A. Bataev, Guilherme Yuuki Koga, Yaofeng Guo, Walter José Botta, Hidemi Kato, Takeshi Wada, Boris B. Bokhonov, Dina V. Dudina, Alberto Moreira Jorge
Metals 9 (8) 2019/08
DOI: 10.3390/met9080846
eISSN: 2075-4701
-
Structure and mechanical properties of Ti-Based alloys containing Ag subjected to a thermomechanical treatment Peer-reviewed
Vladislav Zadorozhnyy, Alexey Kopylov, Mikhail Gorshenkov, Elena Shabanova, Mikhail Zadorozhnyy, Alexander Novikov, Aleksey Maksimkin, Takeshi Wada, Dmitri V. Louzguine-Luzgin, Hidemi Kato
Journal of Alloys and Compounds 781 1182-1188 2019/04
DOI: 10.1016/j.jallcom.2018.12.152
ISSN: 0925-8388
-
Low cost high specific surface architectured nanoporous metal with corrosion resistance produced by liquid metal dealloying from commercial nickel superalloy Peer-reviewed
Morgane Mokhtari, Takeshi Wada, Christophe Le Bourlot, Nicolas Mary, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire
Scripta Materialia 163 5-8 2019/04
DOI: 10.1016/j.scriptamat.2018.12.023
ISSN: 1359-6462
-
High-entropy alloys with hexagonal close-packed structure in Ir26Mo20Rh22.5Ru20W11.5 and Ir25.5Mo20Rh20Ru25W9.5 alloys designed by sandwich strategy for the valence electron concentration of constituent elements in the periodic chart Peer-reviewed
Akira Takeuchi, Takeshi Wada, Hidemi Kato
Materials Transactions 60 (8) 1666-1673 2019
DOI: 10.2320/matertrans.M2019037
ISSN: 1345-9678
-
Critically percolated states in high-entropy alloys with exact equi-atomicity Peer-reviewed
Akira Takeuchi, Kunio Yubuta, Takeshi Wada
Materials Transactions 60 (2) 330-337 2019
DOI: 10.2320/matertrans.M2018216
ISSN: 1345-9678
-
Solid Solutions with bcc, hcp, and fcc Structures Formed in a Composition Line in Multicomponent Ir–Rh–Ru–W–Mo System Peer-reviewed
Akira Takeuchi, Takeshi Wada, Hidemi Kato
Materials Transactions 60 (11) 2267-2276 2019
DOI: 10.2320/matertrans.MT-M2019212
ISSN: 1345-9678
-
Nanoporous magnesium Peer-reviewed
Ilya Vladimirovich Okulov, Sviatlana V. Lamaka, Takeshi Wada, Kunio Yubuta, Mikhail L. Zheludkevich, Jörg Weissmüller, Jürgen Markmann, Hidemi Kato
Nano Research 11 (12) 6428-6435 2018/12/01
DOI: 10.1007/s12274-018-2167-9
ISSN: 1998-0124
eISSN: 1998-0000
-
A Ni-, Al-, Be-free Zr-based metallic glass for biomedical applications Peer-reviewed
Oriane Baulin, Damien Fabrègue, Hidemi Kato, Takeshi Wada, Sandra Balvay, Daniel J. Hartmann, Jean Marc Pelletier
Journal of Non-Crystalline Solids 500 78-83 2018/11/15
DOI: 10.1016/j.jnoncrysol.2018.06.026
ISSN: 0022-3093
-
The mechanical cycling behavior of TiNi based crystal/glassy alloy in the superelastic mode Peer-reviewed
J. Jiang, D. X. Wei, T. Wada, D. V. Louzguine-Luzgin, H. Kato
Journal of Alloys and Compounds 768 176-180 2018/11/05
DOI: 10.1016/j.jallcom.2018.07.255
ISSN: 0925-8388
-
Microstructure characterization by X-ray tomography and EBSD of porous FeCr produced by liquid metal dealloying Peer-reviewed
Morgane Mokhtari, Christophe Le Bourlot, Jérome Adrien, Anne Bonnin, Takeshi Wada, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire
Materials Characterization 144 166-172 2018/10
DOI: 10.1016/j.matchar.2018.06.032
ISSN: 1044-5803
-
Imaging of 3D morphological evolution of nanoporous silicon anode in lithium ion battery by X-ray nano-tomography Peer-reviewed
Chonghang Zhao, Takeshi Wada, Vincent De Andrade, Doğa Gürsoy, Hidemi Kato, Yu chen Karen Chen-Wiegart
Nano Energy 52 381-390 2018/10
DOI: 10.1016/j.nanoen.2018.08.009
ISSN: 2211-2855
-
Open porous dealloying-based biomaterials as a novel biomaterial platform Peer-reviewed
I. V. Okulov, A. V. Okulov, I. V. Soldatov, B. Luthringer, R. Willumeit-Römer, T. Wada, H. Kato, J. Weissmüller, J. Markmann
Materials Science and Engineering C 88 95-103 2018/07/01
DOI: 10.1016/j.msec.2018.03.008
ISSN: 0928-4931
-
A new, toxic element-free Mg-based metallic glass for biomedical applications
Oriane Baulin, Damien Fabrègue, Hidemi Kato, Aléthéa Liens, Takeshi Wada, Jean-Marc Pelletier
Journal of Non-Crystalline Solids 481 397-402 2018/02/01
Publisher: Elsevier B.V.DOI: 10.1016/j.jnoncrysol.2017.11.024
ISSN: 0022-3093
-
Mechanical properties, electrochemical behavior and biocompatibility of the Ti-based low-alloys containing a minor fraction of noble metals Peer-reviewed
V. Yu. Zadorozhnyy, D. S. Kozak, X. Shi, T. Wada, D. V. Louzguine-Luzgin, H. Kato
JOURNAL OF ALLOYS AND COMPOUNDS 732 915-921 2018/01
DOI: 10.1016/j.jallcom.2017.10.231
ISSN: 0925-8388
eISSN: 1873-4669
-
Preparation of hierarchical porous metals by two-step liquid metal dealloying Peer-reviewed
Takeshi Wada, Pierre-Antoine Geslin, Hidemi Kato
SCRIPTA MATERIALIA 142 101-105 2018/01
DOI: 10.1016/j.scriptamat.2017.08.038
ISSN: 1359-6462
-
A novel method of surface modification by electrochemical deoxidation: Effect on surface characteristics and initial bioactivity of zirconia Peer-reviewed
Juan Liu, Guang Hong, Yu-Han Wu, Kosei Endo, Jian-Min Han, Hiroyuki Kumamoto, Takeshi Wada, Hidemi Kato, Ping Gao, Keiichi Sasaki
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS 105 (8) 2641-2652 2017/11
DOI: 10.1002/jbm.b.33805
ISSN: 1552-4973
eISSN: 1552-4981
-
Three-Dimensional Morphological and Chemical Evolution of Nanoporous Stainless Steel by Liquid Metal Dealloying Peer-reviewed
Chonghang Zhao, Takeshi Wada, Vincent De Andrade, Garth J. Williams, Jeff Gelb, Li Li, Juergen Thieme, Hidemi Kato, Yu-chen Karen Chen-Wiegart
ACS APPLIED MATERIALS & INTERFACES 9 (39) 34172-34184 2017/10
ISSN: 1944-8244
-
ナノオープンポーラスSiを用いたリチウムイオン二次電池負極特性と電極体積変化 Peer-reviewed
和田 武, 加藤 秀実
まてりあ 56 (7) 438-442 2017/07/01
Publisher:ISSN: 1340-2625
-
Mechanical properties, structure, and biocompatibility of dual-axially forged Ti94Fe3Au3, Ti94Fe3Nb3, and Ti94Au3Nb3 alloys Peer-reviewed
V. Yu. Zadorozhnyy, X. Shi, A. N. Kopylov, I. V. Shchetinin, T. Wada, D. V. Louzguine-Luzgin, H. Kato
JOURNAL OF ALLOYS AND COMPOUNDS 707 269-274 2017/06
DOI: 10.1016/j.jallcom.2016.11.349
ISSN: 0925-8388
eISSN: 1873-4669
-
Electrochemical behavior and biocompatibility of Ti-Fe-Cu alloy with high strength and ductility Peer-reviewed
V. Yu. Zadorozhnyy, X. Shi, D. S. Kozak, T. Wada, J. Q. Wang, H. Kato, D. V. Louzguine-Luzgin
JOURNAL OF ALLOYS AND COMPOUNDS 707 291-297 2017/06
DOI: 10.1016/j.jallcom.2016.11.213
ISSN: 0925-8388
eISSN: 1873-4669
-
Cold-rolling influence on microstructure and mechanical properties of NiCr-Ag composites and porous NiCr obtained by liquid metal dealloying Peer-reviewed
Morgane Mokhtari, Christophe Le Bourlot, Jerome Adrien, Sylvain Dancette, Takeshi Wada, Jannick Duchet-Rumeau, Hidemi Kato, Eric Maire
JOURNAL OF ALLOYS AND COMPOUNDS 707 (15) 251-256 2017/06
DOI: 10.1016/j.jallcom.2016.12.105
ISSN: 0925-8388
eISSN: 1873-4669
-
MnFeNiCuPt and MnFeNiCuCo high-entropy alloys designed based on L1(0) structure in Pettifor map for binary compounds Peer-reviewed
A. Takeuchi, T. Wada, Y. Zhang
INTERMETALLICS 82 107-115 2017/03
DOI: 10.1016/j.intermet.2016.12.002
ISSN: 0966-9795
eISSN: 1879-0216
-
ひずみ解放機構を有するオープンセル型バルクナノポーラスシリコン材料の合成技術
和田 武, 市坪 哲, 加藤 秀実
全固体電池のイオン伝導性向上技術と材料、製造プロセス開発 251-257 2017/02/28
Publisher: (株)技術情報協会 -
Three dimensional analysis of nanoporous silicon particles for Li-ion batteries Peer-reviewed
Lucian Roiban, Siddardha Koneti, Takeshi Wada, Hidemi Kato, Francisco J. Cadete Santos Aires, Sergiu Curelea, Thierry Epicier, Eric Maire
MATERIALS CHARACTERIZATION 124 165-170 2017/02
DOI: 10.1016/j.matchar.2016.12.013
ISSN: 1044-5803
eISSN: 1873-4189
-
Mechanical Proeprties and Biocompatibility of the Ti-Baed Low-Alloys Minor Alloying by the Noble Metals Peer-reviewed
V.Y. Zadorozhnyy, X.T. Shi, T. Wada, H. Kato, D.V. Louguine-Luzgin
Nano Hybrids and Composites 13 63-68 2017/01
DOI: 10.4028/www.scientific.net/NHC.13.63
ISSN: 2297-3400
-
Preparation of Nanoporous Si by Dealloying in Metallic Melt and Its Application for Negative Electrode of Lithium Ion Battery Peer-reviewed
Takeshi Wada, Hidemi Kato
MATERIALS TODAY-PROCEEDINGS 4 (11) 11465-11469 2017
DOI: 10.1016/j.matpr.2017.09.030
ISSN: 2214-7853
-
Work-hardenable Mg-based bulk metallic glass matrix composites reinforced by ex-situ porous shape-memory-alloy particles Peer-reviewed
Wei Guo, Takeshi Wada, Hidemi Kato
MATERIALS LETTERS 183 454-458 2016/11
DOI: 10.1016/j.matlet.2016.07.082
ISSN: 0167-577X
eISSN: 1873-4979
-
金属液体の中で形成する共連続型ポーラス金属 Peer-reviewed
加藤秀実, 和田武
まてりあ 55 (11) 519-527 2016/11
Publisher: The Japan Institute of Metals and MaterialsISSN: 1340-2625
-
Enlarging the surface area of an electrolytic capacitor of porous niobium by Mg-Ce eutectic liquid dealloying Peer-reviewed
Joung Wook Kim, Takeshi Wada, Sung Gyoo Kim, Hidemi Kato
SCRIPTA MATERIALIA 122 68-71 2016/09
DOI: 10.1016/j.scriptamat.2016.05.014
ISSN: 1359-6462
-
Formation of porous layer with low Ni content on NiTi substrate by dealloying in metallic melts Peer-reviewed
Kyosuke Ueda, Ryuma Hashimoto, Masahiro Hirohashi, Takeshi Wada, Hidemi Kato, Takayuki Narushima
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 63 (8) 766-770 2016/07/01
Publisher: Journal of the Japan Society of Powder and Powder MetallurgyDOI: 10.2497/jjspm.63.766
ISSN: 0532-8799
-
Evolution of a bicontinuous nanostructure via a solid-state interfacial dealloying reaction Peer-reviewed
Takeshi Wada, Kunio Yubuta, Hidemi Kato
SCRIPTA MATERIALIA 118 33-36 2016/06
DOI: 10.1016/j.scriptamat.2016.03.008
ISSN: 1359-6462
-
Ti-Ag-Pd alloy with good mechanical properties and high potential for biological applications Peer-reviewed
V. Yu. Zadorozhnyy, X. Shi, M. V. Gorshenkov, D. S. Kozak, T. Wada, D. V. Louzguine-Luzgin, A. Inoue, H. Kato
SCIENTIFIC REPORTS 6 25142 2016/04
DOI: 10.1038/srep25142
ISSN: 2045-2322
-
Dual HCP structures formed in senary ScYLaTiZrHf multi-principal-element alloy Peer-reviewed
A. Takeuchi, K. Amiya, T. Wada, K. Yubuta
INTERMETALLICS 69 103-109 2016/02
DOI: 10.1016/j.intermet.2015.10.022
ISSN: 0966-9795
eISSN: 1879-0216
-
Preparation of three-dimensional nanoporous Si using dealloying by metallic melt and application as a lithium-ion rechargeable battery negative electrode Peer-reviewed
Takeshi Wada, Junpei Yamada, Hidemi Kato
JOURNAL OF POWER SOURCES 306 8-16 2016/02
DOI: 10.1016/j.jpowsour.2015.11.079
ISSN: 0378-7753
eISSN: 1873-2755
-
High-Entropy Alloys Including 3d, 4d and 5d Transition Metals from the Same Group in the Periodic Table Peer-reviewed
Akira Takeuchi, Kenji Amiya, Takeshi Wada, Kunio Yubuta
MATERIALS TRANSACTIONS 57 (7) 1197-1201 2016
DOI: 10.2320/matertrans.M2016121
ISSN: 1345-9678
eISSN: 1347-5320
-
Early Science Commissioning Results of the Sub-micron Resolution X-ray Spectroscopy Beamline (SRX) in the Field of Materials Science and Engineering Peer-reviewed
Yu-chen Karen Chen-Wiegart, Garth Williams, Chonghang Zhao, Hua Jiang, Li Li, Michael Demkowicz, Matteo Seita, Mike Short, Sara Ferry, Takeshi Wada, Hidemi Kato, Kang Wei Chou, Stanislas Petrash, Jaclyn Catalano, Yao Yao, Anna Murphy, Nicholas Zumbulyadis, Silvia A. Centeno, Cecil Dybowski, Juergen Thieme
ICXOM23: INTERNATIONAL CONFERENCE ON X-RAY OPTICS AND MICROANALYSIS 1764 030004 2016
DOI: 10.1063/1.4961138
ISSN: 0094-243X
-
Three-dimensional bicontinuous porous graphite generated in low temperature metallic liquid Peer-reviewed
Seung-Geun Yu, Kunio Yubuta, Takeshi Wada, Hidemi Kato
CARBON 96 403-410 2016/01
DOI: 10.1016/j.carbon.2015.09.093
ISSN: 0008-6223
eISSN: 1873-3891
-
Alloy design for high-entropy alloys based on Pettifor map for binary compounds with 1:1 stoichiometry Peer-reviewed
A. Takeuchi, K. Amiya, T. Wada, K. Yubuta
INTERMETALLICS 66 56-66 2015/11
DOI: 10.1016/j.intermet.2015.06.014
ISSN: 0966-9795
eISSN: 1879-0216
-
Investigation of structure-mechanical properties relations of dual-axially forged Ti-based low-alloys Peer-reviewed
V. Yu. Zadorozhnyy, I. V. Shchetinin, M. V. Zheleznyi, N. V. Chirikov, T. Wada, H. Kato, D. V. Louzguine-Luzgin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 632 88-95 2015/04
DOI: 10.1016/j.msea.2015.02.065
ISSN: 0921-5093
eISSN: 1873-4936
-
ひずみ解放機構を有するオープンセル型バルクナノポーラス材料のリチウム蓄電池負極特性
市坪 哲, 和田 武, 加藤 秀実
Engineering Materials 63 (3) 38-44 2015/03
Publisher: 日刊工業新聞社ISSN: 0452-2834
-
Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors Peer-reviewed
Joung Wook Kim, Masashi Tsuda, Takeshi Wada, Kunio Yubuta, Sung Gyoo Kim, Hidemi Kato
ACTA MATERIALIA 84 497-505 2015/02
DOI: 10.1016/j.actamat.2014.11.002
ISSN: 1359-6454
eISSN: 1873-2453
-
High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams Peer-reviewed
Akira Takeuchi, Kenji Amiya, Takeshi Wada, Kunio Yubuta, Wei Zhang
JOM 66 (10) 1984-1992 2014/10
DOI: 10.1007/s11837-014-1085-x
ISSN: 1047-4838
eISSN: 1543-1851
-
リチウムイオン蓄電池負極用大比表面積オープンセル型ポーラスシリコン粉末の開発
和田 武, 市坪 哲, 湯蓋 邦夫, 吉田 浩一, 瀬川 晴彦, 加藤 秀実
化学工業 65 (10) 25-32 2014/10/01
Publisher: 化学工業社 -
Bulk-Nanoporous-Silicon Negative Electrode with Extremely High Cyclability for Lithium-Ion Batteries Prepared Using a Top-Down Process Peer-reviewed
Takeshi Wada, Tetsu Ichitsubo, Kunio Yubuta, Haruhiko Segawa, Hirokazu Yoshida, Hidemi Kato
NANO LETTERS 14 (8) 4505-4510 2014/08
DOI: 10.1021/nl501500g
ISSN: 1530-6984
eISSN: 1530-6992
-
Sub-micron porous niobium solid electrolytic capacitor prepared by dealloying in a metallic melt Peer-reviewed
Joung Wook Kim, Takeshi Wada, Sung Gyoo Kim, Hidemi Kato
MATERIALS LETTERS 116 223-226 2014/02
DOI: 10.1016/j.matlet.2013.11.036
ISSN: 0167-577X
eISSN: 1873-4979
-
Alloy Designs of High-Entropy Crystalline and Bulk Glassy Alloys by Evaluating Mixing Enthalpy and Delta Parameter for Quinary to Decimal Equi-Atomic Alloys Peer-reviewed
Akira Takeuchi, Kenji Amiya, Takeshi Wada, Kunio Yubuta, Wei Zhang, Akihiro Makino
MATERIALS TRANSACTIONS 55 (1) 165-170 2014/01
DOI: 10.2320/matertrans.M2013352
ISSN: 1345-9678
eISSN: 1347-5320
-
High power diode laser cladding of Fe-Co-B-Si-C-Nb amorphous coating: Layered microstructure and properties Peer-reviewed
Y. Y. Zhu, Z. G. Li, R. F. Li, M. Li, K. Feng, Y. X. Wu, T. Wada, H. Kato
SURFACE & COATINGS TECHNOLOGY 235 699-705 2013/11
DOI: 10.1016/j.surfcoat.2013.08.050
ISSN: 0257-8972
-
Effect of cobalt microalloying on the glass forming ability of Ti-Cu-Pd-Zr metallic glass Peer-reviewed
H. Wang, E. S. Park, J. J. Oak, A. D. Setyawan, S. L. Zhu, T. Wada, X. M. Wang, A. Takeuchi, H. Kato
JOURNAL OF NON-CRYSTALLINE SOLIDS 379 155-160 2013/11
DOI: 10.1016/j.jnoncrysol.2013.08.001
ISSN: 0022-3093
eISSN: 1873-4812
-
Mg-based metallic glass matrix composite with in situ porous titanium dispersoids by dealloying in metallic melt Peer-reviewed
Hideki Oka, Wei Guo, Takeshi Wada, Hidemi Kato
Materials Science and Engineering A 582 76-83 2013/10
DOI: 10.1016/j.msea.2013.06.015
ISSN: 0921-5093
-
3D morphological evolution of porous titanium by x-ray micro- and nano-tomography Peer-reviewed
Yu-Chen Karen Chen-Wiegart, Takeshi Wada, Nikita Butakov, Xianghui Xiao, Francesco De Carlo, Hidemi Kato, Jun Wang, David C. Dunand, Eric Maire
Journal of Materials Research 28 (17) 2444-2452 2013/09/14
DOI: 10.1557/jmr.2013.151
ISSN: 0884-2914 2044-5326
-
Entropies in Alloy Design for High-Entropy and Bulk Glassy Alloys Peer-reviewed
Akira Takeuchi, Kenji Amiya, Takeshi Wada, Kunio Yubuta, Wei Zhang, Akihiro Makino
ENTROPY 15 (9) 3810-3821 2013/09
DOI: 10.3390/e15093810
ISSN: 1099-4300
-
Kinetics of formation and coarsening of nanoporous alpha-titanium dealloyed with Mg melt Peer-reviewed
Masashi Tsuda, Takeshi Wada, Hidemi Kato
JOURNAL OF APPLIED PHYSICS 114 (11) 113503 2013/09
DOI: 10.1063/1.4821066
ISSN: 0021-8979
-
卑・半金属およびそれらの合金によるオープンセル型ポーラス材料の開発 Peer-reviewed
加藤 秀実, 和田 武, 津田 雅史
まてりあ 52 (8) 395-403 2013/08/10
Publisher: The Japan Institute of Metals and MaterialsISSN: 1340-2625
-
Dynamic relaxation of Pd42.5Ni7.5Cu 30P20 metallic glass Peer-reviewed
Hidemi Kato, Tetsu Ichitsubo, Hao Wang, Takeshi Wada
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 60 (5) 228-235 2013/05
DOI: 10.2497/jjspm.60.228
ISSN: 0532-8799
-
Three-dimensional open-cell macroporous iron, chromium and ferritic stainless steel Peer-reviewed
Takeshi Wada, Hidemi Kato
SCRIPTA MATERIALIA 68 (9) 723-726 2013/05
DOI: 10.1016/j.scriptamat.2013.01.011
ISSN: 1359-6462
-
Electrochemical properties of porous Pd-based bulk metallic glasses Peer-reviewed
Fengxiang Qin, Guoqiang Xie, Takeshi Wada, Shengli Zhu, Zhenhua Dan
Materials Transactions 54 (8) 1347-1350 2013
DOI: 10.2320/matertrans.MF201314
ISSN: 1345-9678
-
Surface-activated supercooled liquid brazing Peer-reviewed
Hidemi Kato, Seung-Geun Yu, Albertus D. Setyawan, Kunio Yubuta, Takeshi Wada
Scripta Materialia 68 (9) 699-702 2013
DOI: 10.1016/j.scriptamat.2013.01.016
ISSN: 1359-6462
-
Nanoporous palladium fabricated from an amorphous Pd42.5Cu 30Ni7.5P20 precursor and its ethanol electro-oxidation performance Peer-reviewed
Zhenhua Dan, Fengxiang Qin, Takeshi Wada, Shin-Ichi Yamaura, Guoqiang Xie, Yu Sugawara, Izumi Muto, Akihiro Makino, Nobuyoshi Harab
Electrochimica Acta 108 512-519 2013
Publisher: Elsevier LtdDOI: 10.1016/j.electacta.2013.07.047
ISSN: 0013-4686
-
Structural Relaxation, Glass Transition, Viscous Formability, and Crystallization of Zr-Cu-Based Bulk Metallic Glasses on Heating Peer-reviewed
Dmitri V. Louzguine-Luzgin, Ichiro Seki, Takeshi Wada, Akihisa Inoue
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 43A (8) 2642-2648 2012/08
DOI: 10.1007/s11661-011-1005-4
ISSN: 1073-5623
eISSN: 1543-1940
-
Microstructure and Electrochemical Behavior of Pd-Cu-Ni-P Bulk Metallic Glass and Its Crystallized Alloys Peer-reviewed
F. X. Qin, T. Wada, G. Q. Xie, S. L. Zhu, A. Inoue
MATERIALS TRANSACTIONS 53 (5) 936-939 2012/05
DOI: 10.2320/matertrans.MBW201120
ISSN: 1345-9678
eISSN: 1347-5320
-
Relationship between the Reinforcement Size and Mechanical Properties of Zr-Based Glassy Matrix Composites Peer-reviewed
Zhenhua Chu, Hidemi Kato, Takeshi Wada, Guoqiang Xie, Guangyin Yuan, Wenjiang Ding
MATERIALS TRANSACTIONS 53 (5) 879-884 2012/05
DOI: 10.2320/matertrans.M2011367
ISSN: 1345-9678
eISSN: 1347-5320
-
Formation of Metallic Glass Nanowires by Gas Atomization Peer-reviewed
Koji S. Nakayama, Yoshihiko Yokoyama, Takeshi Wada, Na Chen, Akihisa Inoue
NANO LETTERS 12 (5) 2404-2407 2012/05
DOI: 10.1021/nl3003864
ISSN: 1530-6984
-
A Ni- and Cu-free Zr-based bulk metallic glass with excellent resistance to stress corrosion cracking in simulated body fluids Peer-reviewed
Asahi Kawashima, Takeshi Wada, Kazuyo Ohmura, Guoqiang Xie, Akihisa Inoue
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 542 140-146 2012/04
DOI: 10.1016/j.msea.2012.02.047
ISSN: 0921-5093
-
Alloy Design for High-Entropy Bulk Glassy Alloys Peer-reviewed
A. Takeuchi, N. Chen, T. Wada, W. Zhang, Y. Yokoyama, A. Inoue, J. -W. Yeh
IUMRS INTERNATIONAL CONFERENCE IN ASIA 2011 36 226-234 2012
DOI: 10.1016/j.proeng.2012.03.035
ISSN: 1877-7058
-
Pd20Pt20Cu20Ni20P20 high-entropy alloy as a bulk metallic glass in the centimeter Peer-reviewed
A. Takeuchi, N. Chen, T. Wada, Y. Yokoyama, H. Kato, A. Inoue, J. W. Yeh
INTERMETALLICS 19 (10) 1546-1554 2011/10
DOI: 10.1016/j.intermet.2011.05.030
ISSN: 0966-9795
eISSN: 1879-0216
-
Nano- to submicro-porous β-Ti alloy prepared from dealloying in a metallic melt Peer-reviewed
Takeshi Wada, Albertus Deny Setyawan, Kunio Yubuta, Hidemi Kato
Scripta Materialia 65 (6) 532-535 2011/09
DOI: 10.1016/j.scriptamat.2011.06.019
ISSN: 1359-6462
-
Control of wetting on Ti-based bulk metallic glass surfaces by a hydrothermal method Peer-reviewed
Ken-ichi Katsumata, Takeshi Wada, Akihisa Inoue, Munetoshi Sakai, Akira Nakajima, Akira Fujishima, Nobuhiro Matsushita, Kiyoshi Okada
JOURNAL OF MATERIALS SCIENCE 46 (10) 3430-3435 2011/05
DOI: 10.1007/s10853-010-5245-2
ISSN: 0022-2461
-
Dealloying by metallic melt Peer-reviewed
Takeshi Wada, Kunio Yubuta, Akihisa Inoue, Hidemi Kato
MATERIALS LETTERS 65 (7) 1076-1078 2011/04
DOI: 10.1016/j.matlet.2011.01.054
ISSN: 0167-577X
-
Structure control of bioactive titanate nanomesh layers fabricated on laser irradiated Ti-based bulk metallic glass using hydrothermal-electrochemical method Peer-reviewed
Sayaka Maruyama, Naota Sugiyama, Masahiro Yoshimura, Togo Shinonaga, Masahiro Tsukamoto, Nobuyuki Abe, Takeshi Wada, Xinmin Wang, Akihisa Inoue, Kiyoshi Okada, Nobuhiro Matsushita
Materials Research Society Symposium Proceedings 1316 134-139 2011
DOI: 10.1557/opl.2011.673
ISSN: 0272-9172
-
Electrochemical behavior, microstructure and bioactivity of Ti-based metallic glasses
Fengxiang Qin, Xinmin Wang, Guoqiang Xie, Kunsu Son, Takeshi Wada, Nobuhiro Matsushita, Masahiro Tsukamoto, Takao Hahawa, Akihisa Inoue
Proceedings of the Visual-JW2010 2010/11
-
ポーラス金属ガラスの作成と性質 Invited Peer-reviewed
和田 武, 井上 明久
金属 80 (10) 829-836 2010/10
Publisher:ISSN: 0368-6337
-
In situ phase separation and flow behavior in the glass transition region Peer-reviewed
Dmitri V. Louzguine-Luzgin, Takeshi Wada, Hidemi Kato, John Perepezko, Akihisa Inoue
INTERMETALLICS 18 (6) 1235-1239 2010/06
DOI: 10.1016/j.intermet.2010.03.018
ISSN: 0966-9795
eISSN: 1879-0216
-
Variation of topography on the Ti-based bulk metallic glass after femtosecond laser irradiation Peer-reviewed
Shinonaga, T, Tsukamoto, M, Tone, D, Maruyama, S, Matsushita, N, Wada, T, Wang, X, Honda, H, Motokoshi, S, Fujita, M, Abe, N
29th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2010 - Congress Proceedings 103 1486-1490 2010
-
MICROSTRUCTURE FORMATION ON A TITANIUM-BASED BULK METALLIC GLASS PLATE BY FEMTOSECOND LASER IRRADIATION Peer-reviewed
Masahiro Tsukamoto, Togo Shinonaga, Nobuhiro Matsushita, Xinmin Wang, Takeshi Wada, Nobuyuki Abe
CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III 219 49-+ 2010
ISSN: 1042-1122
-
FORMATION OF BONE-LIKE HYDROXYAPATITE ON SURFACE-MODIFIED BULK METALLIC GLASS USING A HYDROTHERMAL-ELECTROCHEMICAL METHOD Peer-reviewed
Nobuhiro Matsushita, Naota Sugiyama, Sayaka Maruyama, Rieko Ito, Kenichi Katsumata, Masahiro Yoshimura, Masahiro Tsukamoto, Xinmin Wang, Takeshi Wada, Akihisa Inoue, Kiyoshi Okada
CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III 219 23-+ 2010
ISSN: 1042-1122
-
Microstructure and electrochemical behavior of Ti-coated Zr55Al10Ni5Cu30 bulk metallic glass Peer-reviewed
F. X. Qin, X. M. Wang, G. Q. Xie, K. Wada, M. Song, K. Furuya, K. Asami, A. Inoue
INTERMETALLICS 17 (11) 945-950 2009/11
DOI: 10.1016/j.intermet.2009.04.009
ISSN: 0966-9795
eISSN: 1879-0216
-
Oxygen embrittlement in a Cu-Hf-Al bulk metallic glass Peer-reviewed
S. V. Madge, T. Wada, D. V. Louzguine-Luzgin, A. L. Greer, A. Inoue
SCRIPTA MATERIALIA 61 (5) 540-543 2009/09
DOI: 10.1016/j.scriptamat.2009.05.018
ISSN: 1359-6462
-
Improved wettability of Sn-based solder over the Cu60Zr30Ti10 bulk metallic glass surface Peer-reviewed
A. Imai, M. Katayama, S. Maruyama, H. Nishikawa, T. Wada, H. Kimura, M. Fukuhara, T. Takemoto, A. Inoue, Y. Matsumoto
JOURNAL OF MATERIALS RESEARCH 24 (9) 2931-2934 2009/09
ISSN: 0884-2914
-
Formation and bioactivation of Zr-Al-Co bulk metallic glasses Peer-reviewed
Takeshi Wada, Fengxiang Qin, Xinmin Wang, Masahiro Yoshimura, Akihisa Inoue, Naota Sugiyama, Rieko Ito, Nobuhiro Matsushita
JOURNAL OF MATERIALS RESEARCH 24 (9) 2941-2948 2009/09
ISSN: 0884-2914
-
Microstructure and Electrochemical Properties of PVD TiN, (Ti, Al) N-Coated Ti-Based Bulk Metallic Glasses Peer-reviewed
F. X. Qin, G. Q. Xie, X. M. Wang, T. Wada, M. Song, K. Furuya, M. Yoshimura, M. Tsukamoto, A. Inoue
MATERIALS TRANSACTIONS 50 (6) 1313-1317 2009/06
DOI: 10.2320/matertrans.ME200820
ISSN: 1345-9678
eISSN: 1347-5320
-
Influence of minor Si addition on the glass-forming ability and mechanical properties of Pd40Ni40P20 alloy Peer-reviewed
N. Chen, D. V. Louzguine-Luzgin, G. Q. Xie, T. Wada, A. Inoue
ACTA MATERIALIA 57 (9) 2775-2780 2009/05
DOI: 10.1016/j.actamat.2009.02.028
ISSN: 1359-6454
-
Supercooled liquid foaming of a Zr-Al-Cu-Ag bulk metallic glass containing pressurized helium pores Peer-reviewed
Takeshi Wada, Xinmin Wang, Hisamichi Kimura, Akihisa Inoue
MATERIALS LETTERS 63 (11) 858-860 2009/04
DOI: 10.1016/j.matlet.2009.01.021
ISSN: 0167-577X
-
Formation of Hydroxyapatite on Ti-Coated Ti-Zr-Cu-Pd Bulk Metallic Glass Peer-reviewed
F. X. Qin, X. M. Wang, T. Wada, G. Q. Xie, K. Asami, A. Inoue
MATERIALS TRANSACTIONS 50 (3) 605-609 2009/03
DOI: 10.2320/matertrans.MRA2008221
ISSN: 1345-9678
eISSN: 1347-5320
-
Highly inhomogeneous compressive plasticity in nanocrystal-toughened Zr-Cu-Ni-Al bulk metallic glass Peer-reviewed
F. O. Mear, T. Wada, D. V. Louzguine-Luzgin, A. Inoue
PHILOSOPHICAL MAGAZINE LETTERS 89 (4) 276-281 2009
DOI: 10.1080/09500830902817861
ISSN: 0950-0839
-
Preparation of a Zr-based bulk glassy alloy foam Peer-reviewed
Takeshi Wada, Xinmin Wang, Hisamichi Kimura, Akihisa Inoue
SCRIPTA MATERIALIA 59 (10) 1071-1074 2008/11
DOI: 10.1016/j.scriptamat.2008.07.016
ISSN: 1359-6462
-
Low-temperature dependence of elastic moduli and internal friction for glassy Pd42.5Ni7.5Cu30P20 Peer-reviewed
M. Fukuhara, T. Wada, A. Inoue, F. Yin
PHILOSOPHICAL MAGAZINE LETTERS 88 (5) 335-342 2008/05
DOI: 10.1080/09500830801976644
ISSN: 0950-0839
-
高圧水素を用いたポーラスバルク金属ガラスの創製 Invited Peer-reviewed
Takeshi Wada, Akihisa Inoue
Journal of High Temperature Society 34 (2) 74-78 2008/03/20
Publisher: High Temperature Society of JapanDOI: 10.7791/jhts.34.74
ISSN: 0387-1096
-
Wetting characteristics of Sn-Ag-Cu solder on Pd-based metallic glass Peer-reviewed
Hiroshi Nishikawa, Krit WongPiromsarn, Hiroya Abe, Tadashi Takernoto, Mikio Fukuhara, Takeshi Wada, Akihisa Inoue
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS 148 (1-3) 124-127 2008/02
DOI: 10.1016/j.mseb.2007.09.069
ISSN: 0921-5107
-
In situ analysis of the thermal behavior in the Zr-based multi-component metallic thin film by pulsed laser deposition combined with UHV-laser microscope system Peer-reviewed
Yuji Matsumoto, Miki Hiraoka, Masao Katayama, Seiichi Hata, Mikio Fukuhara, Takeshi Wada, Hisamichi Kimura, Akihisa Inoue
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS 148 (1-3) 179-182 2008/02
DOI: 10.1016/j.mseb.2007.09.049
ISSN: 0921-5107
-
Improved mechanical properties of bulk glassy alloys containing spherical pores Peer-reviewed
Akihisa Inoue, Takeshi Wada, Dmitri V. Louzguine-Luzgin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 471 (1-2) 144-150 2007/12
DOI: 10.1016/j.msea.2006.10.172
ISSN: 0921-5093
eISSN: 1873-4936
-
Preparation of Zr-based metallic glass nanowires and nanoparticles by selective etching Peer-reviewed
Takeshi Wada, Dmitri V. Louzguine-Luzgin, Akihisa Inoue
SCRIPTA MATERIALIA 57 (10) 901-904 2007/11
DOI: 10.1016/j.scriptamat.2007.07.032
ISSN: 1359-6462
-
Ultrasonic characteristics of porous Pd42.5Cu30Ni7.5P20 glassy alloys Peer-reviewed
Mikio Fukuhara, Takeshi Wada, Akihisa Inoue
JOURNAL OF APPLIED PHYSICS 102 (8) 083502 2007/10
DOI: 10.1063/1.2795684
ISSN: 0021-8979
-
Preparation of open-cell porous Zr-based bulk glassy alloy Peer-reviewed
Takeshi Wada, Fengxiang Qin, Xinmin Wang, Akihisa Inoue, Masahiro Yoshimura
MATERIALS TRANSACTIONS 48 (9) 2381-2384 2007/09
DOI: 10.2320/matertrans.MAW200707
ISSN: 1345-9678
eISSN: 1347-5320
-
Internal friction of nitrogen-doped Zr-based glassy composite alloy Peer-reviewed
Masashi Hasegawa, Daisuke Nagata, Takeshi Wada, Akihisa Inoue
MATERIALS TRANSACTIONS 48 (7) 1755-1758 2007/07
DOI: 10.2320/matertrans.MJ200759
ISSN: 1345-9678
eISSN: 1347-5320
-
New Pd-based bulk glassy alloys with high glass-forming ability Peer-reviewed
Nobuyuki Nishiyama, Kana Takenaka, Takeshi Wada, Hisamichi Kimura, Akihisa Inoue
JOURNAL OF ALLOYS AND COMPOUNDS 434 (SPEC. ISS.) 138-140 2007/05
DOI: 10.1016/j.jallcom.2006.08.249
ISSN: 0925-8388
-
Internal friction induced by interstitial atoms in multicomponent glassy alloy and composite Peer-reviewed
M. Hasegawa, M. Takeuchi, D. Nagata, T. Wada, H. Kato, S. Yamaura, A. Inoue
JOURNAL OF ALLOYS AND COMPOUNDS 434 (SPEC. ISS.) 196-198 2007/05
DOI: 10.1016/j.jallcom.2006.08.268
ISSN: 0925-8388
-
Mechanical properties of porous bulk glassy alloy prepared in high-pressure hydrogen atmosphere Peer-reviewed
Takeshi Wada, Akihisa Inoue, A. Lindsay Greer
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 449 958-961 2007/03
DOI: 10.1016/j.msea.2006.02.337
ISSN: 0921-5093
-
Wettability between Pd-based Metallic Glass and Lead-free Solder Peer-reviewed
H. Nishikawa, W. P. Krit, H.Abe, T.Takemoto, M.Hukuhara, T.Wada, A.Inoue
Proc. 13th Symposium on Microjoining and Assembly Technology in Electronics 179-182 2007/02
-
Production of bulk glassy alloy foams by high pressure hydrogen Peer-reviewed
Takeshi Wada, Akihisa Inoue
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 447 (1-2) 254-260 2007/02
DOI: 10.1016/j.msea.2006.10.144
ISSN: 0921-5093
-
Bulk non-equilibrium alloys and porous glassy alloys with unique mechanical characteristics Peer-reviewed
A. Inoue, T. Wada, X. M. Wang, A. L. Greer
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 442 (1-2) 233-242 2006/12
DOI: 10.1016/j.msea.2006.04.143
ISSN: 0921-5093
eISSN: 1873-4936
-
Preparation and mechanical properties of dispersed-ZrN glassy composite alloys containing pores Peer-reviewed
Masashi Hasegawa, Daisuke Nagata, Takeshi Wada, Akihisa Inoue
ACTA MATERIALIA 54 (12) 3221-3226 2006/07
DOI: 10.1016/j.actamat.2006.03.008
ISSN: 1359-6454
-
Fragility and thermal stability of Pt- and Pd-based bulk glass forming liquids and their correlation with deformability Peer-reviewed
H Kato, T Wada, M Hasegawa, J Saida, A Inoue, HS Chen
SCRIPTA MATERIALIA 54 (12) 2023-2027 2006/06
DOI: 10.1016/j.scriptamat.2006.03.025
ISSN: 1359-6462
-
Effect of volume fraction and geometry of pores on mechanical properties of porous bulk glassy Pd42.5Cu30Ni7.5P20 alloys Peer-reviewed
T Wada, M Kinaka, A Inoue
JOURNAL OF MATERIALS RESEARCH 21 (4) 1041-1047 2006/04
ISSN: 0884-2914
-
Internal friction and mechanical strength of hydrogenated Ti-rich multicomponent glassy alloys Peer-reviewed
M. Hasegawa, M. Takeuchi, D. Nagata, T. Wada, H. Kato, S. Yamaura, A. Inoue
HIGH DAMPING MATERIALS II 319 139-143 2006
DOI: 10.4028/0-87849-406-5.139
ISSN: 1013-9826
-
Ni-rich Ni-Pd-P glassy alloy with high strength and good ductility Peer-reviewed
YQ Zeng, N Nishiyama, T Wada, DV Louzguine-Luzgin, A Inoue
MATERIALS TRANSACTIONS 47 (1) 175-178 2006/01
DOI: 10.2320/matertrans.47.175
ISSN: 1345-9678
eISSN: 1347-5320
-
Formation and mechanical properties of porous Pd-Pt-Cu-P bulk glassy alloys Peer-reviewed
T Wada, K Takenaka, N Nishiyama, A Inoue
MATERIALS TRANSACTIONS 46 (12) 2777-2780 2005/12
DOI: 10.2320/matertrans.46.2777
ISSN: 1345-9678
eISSN: 1347-5320
-
Undercooling behavior and critical cooling rate of Pd-Pt-Cu-P alloy Peer-reviewed
N Nishiyama, K Takenaka, T Wada, H Kimura, A Inoue
MATERIALS TRANSACTIONS 46 (12) 2807-2810 2005/12
DOI: 10.2320/matertrans.46.2807
ISSN: 1345-9678
eISSN: 1347-5320
-
New Pd-based bulk glassy alloys with high glass-forming ability and large supercooled liquid region Peer-reviewed
K Takenaka, T Wada, N Nishiyama, H Kimura, A Inoue
MATERIALS TRANSACTIONS 46 (7) 1720-1724 2005/07
DOI: 10.2320/matertrans.46.1720
ISSN: 1345-9678
eISSN: 1347-5320
-
Enhancement of room-temperature plasticity in a bulk metallic glass by finely dispersed porosity Peer-reviewed
T Wada, A Inoue, AL Greer
APPLIED PHYSICS LETTERS 86 (25) 251907 2005/06
DOI: 10.1063/1.1953884
ISSN: 0003-6951
eISSN: 1077-3118
-
Formation of porous Pd-based bulk glassy alloys by a high hydrogen pressure melting-water quenching method and their mechanical properties Peer-reviewed
T Wada, A Inoue
MATERIALS TRANSACTIONS 45 (8) 2761-2765 2004/08
DOI: 10.2320/matertrans.45.2761
ISSN: 1345-9678
eISSN: 1347-5320
-
Fabrication, thermal stability and mechanical properties of porous bulk glassy Pd-Cu-Ni-P alloys Peer-reviewed
T Wada, A Inoue
MATERIALS TRANSACTIONS 44 (10) 2228-2231 2003/10
DOI: 10.2320/matertrans.44.2228
ISSN: 1345-9678
eISSN: 1347-5320
-
Self-diffusion of cadmium in cadmium telluride annealed in tellurium-saturated atmosphere
R. Kanno, T. Wada, Y. Yamazaki, J. Wang, M. Isshiki, Y. Iijima
Materials Science in Semiconductor Processing 6 (5-6) 319-322 2003/10
DOI: 10.1016/j.mssp.2003.07.020
ISSN: 1369-8001
-
Formation and high mechanical strength of bulk glassy alloys in Zr-Al-Co-Cu system Peer-reviewed
T Wada, T Zhang, A Inoue
MATERIALS TRANSACTIONS 44 (9) 1839-1844 2003/09
DOI: 10.2320/matertrans.44.1839
ISSN: 1345-9678
eISSN: 1347-5320
-
Formation, thermal stability and mechanical properties in Zr-Al-Co bulk glassy alloys Peer-reviewed
T Wada, T Zhang, A Inoue
MATERIALS TRANSACTIONS 43 (11) 2843-2846 2002/11
DOI: 10.2320/matertrans.43.2843
ISSN: 1345-9678
eISSN: 1347-5320
Misc. 30
-
Mechanical Bonding of Immiscible Ti/Mg by Eutectic Melting Induced Liquid Metal Dealloying Method
大橋勇介, 倉林康太, 和田武, 加藤秀実
スマートプロセス学会誌 13 (4) 2024
ISSN: 2186-702X
-
デアロイングを利用したFe-Mg継手の強度に及ぼす接合パラメータの影響
倉林康太, 大橋勇介, 和田武, 加藤秀実
日本金属学会講演大会(Web) 175th 2024
-
重イオン照射したNi-Zr合金中の微細構造と硬さ変化の照射条件依存性
大林浩也, 金野泰幸, 岩瀬彰宏, 堀史説, 石川法人, 和田武, 加藤秀実
大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2022 2023
-
重イオン照射によるNi-Ti金属間化合物の局所構造および硬さの変化
世山将大, 平山翔太, 岩瀬彰宏, 金野泰幸, 堀史説, 石川法人, 和田武, 加藤秀実
大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2022 2023
-
金属溶湯脱成分法を応用した純チタン-純マグネシウム接合における界面組織と接合強度の関係
大橋勇介, 倉林康太, 和田武, 加藤秀実
日本金属学会講演大会(Web) 172nd 2023
-
共連続オープンポーラス表面層を付与した結晶金属と金属ガラス過冷却液体の含浸接合
前川優太, 大橋勇介, 山田類, 和田武, 加藤秀実
日本金属学会講演大会(Web) 173rd 2023
-
共連続ミクロ組織の形成によるTi/Mg異種材料接合
大橋勇介, 山田類, 和田武, 加藤秀実
日本金属学会講演大会(Web) 173rd 2023
-
Local structure change and amorphization of NiZr intermetallics by Heavy ion Irradiation
大林浩也, 堀史説, 平山翔太, 岩瀬彰宏, 金野泰幸, 松井利之, 加藤秀実, 和田武, 石川法人
日本物理学会講演概要集(CD-ROM) 78 (1) 2023
ISSN: 2189-079X
-
ハイエントロピー金属ガラスのガラス形成能と動的機械的性質
和田武, 大橋勇介, ジャン ジン, 加藤秀実
日本金属学会講演大会(Web) 170th 2022
-
Ni-Zr系金属間化合物への重イオン照射による結晶相からのアモルファス化制御
大林浩也, 岩瀬彰宏, 岩瀬彰宏, 金野泰幸, 松井利之, 和田武, 加藤秀実, 石川法人, 堀史説
日本金属学会講演大会(Web) 171st 2022
-
亜共晶Zr化合物合金への重イオン照射による微細構造と硬さ変化
堀史説, 盛国祐太, 大林浩也, 岩瀬彰宏, 金野泰幸, 和田武, 加藤秀実, 石川法人
大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2021 2022
-
重イオン照射によるNi-Zr系金属間化合物の微細構造と硬さ変化
大林浩也, 岩瀬彰宏, 金野泰幸, 岩瀬彰宏, 堀史説, 石川法人, 和田武, 加藤秀実
大阪公立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2021 2022
-
Pd20Pt20Ni20Cu20P20ハイエントロピー金属ガラス形成に対する熱力学・速度論的考察
大橋勇介, 和田武, 加藤秀実
粉体粉末冶金協会講演大会(Web) 2021 2021
-
Glass-forming ability and dynamic mechanical property of high-entropy metallic glasses
和田武, 大橋勇介, JIANG J., 加藤秀実
日本セラミックス協会秋季シンポジウム講演予稿集(Web) 34th 2021
-
Zr基ハイエントロピーバルク金属ガラスの作製とそのガラス形成能
大橋勇介, 和田武, 加藤秀実
日本金属学会講演大会(Web) 168th 2021
-
Zr-Cu-基バルク金属ガラスのハイエントロピー化がガラス形成能・結晶化・フラジリティに及ぼす影響
大橋勇介, 和田武, 加藤秀実
日本金属学会講演大会(Web) 169th 2021
-
重イオン照射によるNi-Zr金属間化合物の微細構造と硬度変化
大林浩也, 堀史説, 岩瀬彰宏, 金野泰幸, 和田武, 加藤秀実, 前川雅樹, 河裾厚男, 石川法人
日本金属学会講演大会(Web) 169th 2021
-
Zr基金属間化合物への重イオン照射による微細構造変化
盛国祐太, 大林浩也, 岩瀬彰宏, 金野泰幸, 堀史説, 和田武, 加藤秀実, 石川法人, 前川雅樹, 河裾厚男
大阪府立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2020 2021
-
Zr基金属間化合物への重イオン照射による微細構造変化
堀史説, 鷹野陽弘, 岩瀬彰宏, 和田武, 加藤秀実, 斎藤勇一, 石川法人, 徐きゅう
大阪府立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2019 2021
-
Zr基金属間化合物への重イオン照射による微細構造変化
鷹野陽弘, 岩瀬彰宏, 堀史説, 和田武, 加藤秀実, 斎藤勇一, 石川法人, 徐きゅう
大阪府立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2018 2020
-
高出力Mg蓄電池を目指した液体S/FeS2複合正極のその場合成
古橋卓弥, 下川航平, 河口智也, 和田武, 加藤秀実, 市坪哲
電気化学会東北支部セミコンファレンス・東北若手の会(CD-ROM) 51st 2020
-
高エネルギー重イオン照射による金属間化合物の局所構造変化
鷹野陽弘, 杉田健人, 岩瀬彰宏, 和田武, 加藤秀実, 前川雅樹, 河裾厚男, 石川法人, 喜多村茜, 堀史説
日本金属学会講演大会(Web) 165th 2019
-
Zr基金属間化合物への粒子線照射効果による微細構造変化
鷹野陽弘, 堀史説, 岩瀬彰宏, 和田武, 加藤秀実, 斎藤勇一, 徐きゅう
大阪府立大学研究推進機構放射線研究センター放射線施設共同利用報告書 2017 2019
-
Various features modification of bulk amorphous alloys with high energetic particles irradiation
堀史説, 角倉優雅, 鷹野陽弘, 岩瀬彰宏, 和田武, 加藤秀実
東北大学金属材料研究所新素材共同研究開発センター共同利用研究報告書(CD-ROM) 2017 2018
-
Synthesis of Large Surface Area Open-cell Porous Silicon Powder for Anode of Lithium-ion Rechargeable Batteries
65 (10) 761-768 2014/10
Publisher: 小峰工業出版ISSN: 0451-2014
-
Nanoporous Base Metal Prepared by Dealloying in Metallic Melt and Its Application for Functionally Graded Materials
47 (12) 913-919 2012/12
Publisher: 日本セラミックス協会ISSN: 0009-031X
-
Ti基金属ガラス生体活性向上のためのフェムト秒レー ザーによる表面形態変化
篠永 東吾, 塚本 雅裕, 丸山 沙也香, 松下 伸広, 和田 武, 王 新敏, 本田 博史, 藤田 雅之, 阿部 信行, 井上 明久
レ-ザ-研究 39 (5) 347-353 2011
Publisher: The Laser Society of JapanDOI: 10.2184/lsj.39.347
ISSN: 0387-0200
-
Bioactivity of a Ni-Free Ti-Based Metallic Glass
F. X. Qin, K. Wada, X. J. Yang, X. M. Wang, M. Yoshimura, K. Asami, A. Inoue
MATERIALS TRANSACTIONS 51 (3) 529-534 2010/03
DOI: 10.2320/matertrans.MBW200910
ISSN: 1345-9678
eISSN: 1347-5320
-
金属ガラス生体材料の創製
王新敏, 秦風香, 和田武, 孫根洙, 木村久道, 楊賢金, 井上明久
日本機械学会第21回バイオエンジニアリング講演会講演論文集 231-232 2008
-
Metallic Glass Bio-Material Development
X.M. Wang, F.X. Qin, T. Wada, K.S. Son, H. Kimura, X.J. Yang, A. Inoue
Proceedings of the 21th Bioengineering Conference, 2008 Annual Meeting of BED/JSME 231-232 2008
Books and Other Publications 2
-
マクロおよびナノポーラス金属の開発最前線
和田 武
シーエムシー出版 2011/07/25
-
新機能材料 金属ガラスの基礎と産業への応用
和田 武, 井上 明久
テクノシステム 2009/01/19
Presentations 48
-
金属溶湯部分脱成分によるポーラス金属作製
和田武, 加藤秀実
国際・産学連携インヴァースイノベーション材料創出プロジェクト(DEJI2MA) 令和 6 年度 公開討論会 2025/03/02
-
Partial liquid metal dealloying to synthesize nickel-containing nanoporous alloys Invited
Takeshi Wada
Fourth International Symposium on Nanoporous Materials by Alloy Corrosion 2023/04/24
-
Decoupling between Thermodynamic and Dynamical Glass Transitions in High-entropy Metallic Glasses
Jing Jiang, Takeshi Wada, Hidemi Kato
新学術領域研究「ハイエントロピー合金」国際ワークショップ 2023/02/15
-
Preparation of nanoporous metals by liquid metal dealloying Invited
和田武
The International Conference on Education& Research at University and Industrial Development(ICERUID) 2022/10/07
-
Preparation of nanoporous metals by liquid metal dealloying Invited
Takeshi Wada
The International Conference on Education& Research at University and Industrial Development(ICERUID) 2022/10/27
-
Zr基金属ガラス過冷却液体の結晶化挙動に及ぼすハイエントロピー化の影響
和田 武, 太田 佳介, ジャン ジン, 加藤 秀実
日本金属学会2022年秋期講演大会(第171回) 2022/09/22
-
Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses Invited
Takeshi Wada, Jing Jiang, Zhen Lu, Hidemi Kato
The 18th International Conference on Liquid and Amorphous Metals (LAM18) 2022/09/07
-
ハイエントロピー金属ガラスのガラス形成能と動的機械的性質 Invited
和田 武, 大橋 勇介, ジャン ジン, 加藤 秀実
日本金属学会2022年春期講演大会(第170回) 2022/03/17
-
金属のポーラス化技術開発とその応用に関する研究
和田 武
日本金属学会2022年春期講演大会(第170回) 2022/03/17
-
ハイエントロピー金属ガラスのガラス形成能と動力学的性質 Invited
和田 武, 大橋 勇介, ジャン ジン, 加藤 秀実
公益社団法人日本セラミックス協会 第 34 回秋季シンポジウム 2021/09/01
-
Beating Thermal Coarsening in Nanoporous Materials via High-Entropy Design
T. Wada, S.-H. Joo, H. Kato
LyonSE&N & ELyT workshop 2021 / JSPS Core to core 1st symposium 2021/06/23
-
金属溶湯脱成分による階層構造ポーラス金属の作製と形態制御
和田武, 佐藤俊太郎, 加藤秀実
日本金属学会2021年春期講演大会 2021/03/19
-
金属溶湯脱成分によるポーラス金属作製と応用
和田武
第139回金属材料研究所講演会 2020/11/26
-
Preparation of nanoporous metals by liquid metal dealloying (LMD) Invited
和田武
Summit of Materials Science and Technology 2020 (SMST 2020) 2020/11/26
-
金属溶湯脱成分法を用いたポーラス金属粉末の開発
和田武、加藤秀実
粉体粉末冶金協会 2020年度秋季大会(第126回講演大会) 2020/10/28
-
Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability Invited
Takeshi Wada, Hidemi Kato
2019/10/02
-
Preparation of nanoporous metals by liquid metal dealloying Invited
Takeshi Wada, Hidemi Kato
International conference on METALLURGY AND MATERIALS ENGINEERING ~DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS, Ulaanbaatar, Mongolia 2019/09/20
-
Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability Invited
Takeshi Wada, Hidemi Kato
PRICM10, X’ian, China 2019/08/20
-
Zr-Hf-Ti-Al-Co-Ni-Cuハイエントロピーバルク金属ガラスの作製
和田 武, 加藤秀実, 竹内章
粉体粉末冶金協会2019年度春季大会 2019/06/05
-
Zr-Hf-Ti-Al-Co-Ni-Cuハイエントロピーバルク金属ガラスの作製
和田 武
日本金属学会2019年春期講演大会 2019/03/21
-
金属溶湯脱成分によるナノオープンポーラスステンレス鋼の作製とそのリチウム二次電池負極集電体への応用
和田 武
日本金属学会2018年秋期講演大会 2018/09/19
-
Formation of nanoporous Fe-based alloy by solid state interfacial dealloying reaction International-presentation
和田 武
JSPM International Conference on Powder and Powder Metallurgy ~ 60th Anniversary ~ (JSPMIC2017) 2017/11/09
-
固相脱合金化による鉄基合金ナノ構造体の作製
和田 武
日本金属学会2017年秋期講演大会(第161回) 2017/09/07
-
reparation of nanoporous base metals by dealloying in metallic melt and their application for energy related materials
Takeshi WADA, Hidemi KATO
2016 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructure 2016/10/30
-
固相脱合金化反応に及ぼす前駆合金組成の影響
和田武, 加藤秀実, 齋藤樹里, 湯葢邦夫
日本金属学会2016年秋期大会 2016/09/21
-
Preparation of nanoporous less noble metals by solid-state interfacial dealloying reaction International-presentation
Takeshi WADA, Kunio YUBUTA, Hidemi KATO
23rd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2016) 2016/07/03
-
固相脱合金化反応によるナノポーラス鉄合金の作製
和田武, 湯葢邦夫, 加藤秀実
日本金属学会2016年春季講演大会 2016/03/23
-
金属溶湯デアロイングにより作製したナノポーラスシリコンのリチウムイオン電池電極特性と電極体積変化の関係
和田 武, 山田 純平, 加藤 秀実
日本金属学会2015年秋季講演大会 2015/09/17
-
Preparation of Nanoporous Silicon by Dealloying in Metallic Melt and its Application to the Negative Electrode for Lithium-ion Batteries International-presentation
T. Wada, T. Ichitsubo, K. Yubuta, H. Segawa, H. Yoshida, H. Kato
22nd International Symposium on Metastable, Amorphous and Nanostructured Materials 2015/07/13
-
金属溶湯デアロイングによるナノポーラスシリコンの構造制御とそのリチウムイオン二次電池特性
和田 武, 加藤 秀実
2015年日本金属学会春季大会 2015/03/18
-
金属溶湯中脱合化法によるナノ・マイクロポーラスの作製と触媒応用検討
和田 武, 加藤 秀実
日本金属学会 触媒材料研究会ミニシンポジウム:「ナノ組織制御触媒の新展開その2」 2015/02/26
-
金属溶湯デアロイングによるポーラスシリコンの作製とそのリチウムイオン電池負極特性
和田 武, 市坪 哲, 湯葢 邦夫, 瀬川 春彦, 吉田 浩一, 加藤 秀実
第55回電池討論会 2014/11/19
-
金属溶湯デアロイングによるポーラスシリコンの作製とそのリチウムイオン電池負極特性
和田 武, 市坪 哲, 湯葢 邦夫, 瀬川 春彦, 吉田 浩一, 加藤 秀実
日本金属学会秋季大会 2014/09/23
-
Development of Zr-Al-Co Bulk Metallic Glasses for Biomedical Application International-presentation
T. Wada, A. Kawashima, H. Kato
Thermec 2013 2013/12/02
-
金属溶湯デアロイング法によるナノポーラスシリコンの作製
和田 武, 湯葢 邦夫, 加藤 秀実, 瀬川 春彦, 吉田 浩一
日本金属学会 秋季大会 2013/09/17
-
金属溶湯デアロイング法によるオープンポーラスFeおよびCrの作製
和田 武, 加藤 秀実
日本金属学会春期大会 2013/03/27
-
Preparation of Nanoporous Titanium by Dealloying with Metallic Melt International-presentation
T. Wada, K. Yubuta, H. Kato
IUMRS-ICA 2012 2012/08/26
-
金属溶湯デアロイング法によるナノポーラスチタン合金の作製
和田武, アルベタス デニ, スティヤワン, 湯葢邦夫, 加藤秀実
日本金属学会春期大会 2012/03/28
-
金属溶湯中で生じるデアロイング現象を利用したナノポーラス金属の創製
和田武, 湯葢邦夫, 加藤秀実
日本金属学会秋期大会 2011/11/07
-
New Dealloying Method for Developing Nanoporous Base Metals International-presentation
T. Wada, M. Tsuda, K. Yubuta, H. Kato
7th International Conference on Porous Metals and Metallic Foams 2011/09/19
-
Preparation and Bioactivation of Zr-Al-Co Bulk Metallic Glasses International-presentation
T. Wada, F. Qin, X. Wang, M. Yoshimura, A. Inoue, N. Sugiyama, R. Ito, N. Matsushita
The 7th International Conference on Bulk Metallic Glasses 2009/07/22
-
Preparation of Porous Zr-based Glassy Alloys International-presentation
T. Wada, X. Wang, H. Kimura, A. Inoue
IUMRS-ICA 2008 2008/12/10
-
ポーラス金属ガラスの創製
和田 武, 井上 明久
機能性ポーラス材料研究会 2008/09/24
-
Zr基バルク金属ガラス発泡材料の作製
和田 武, 王 新敏, 木村 久道, 井上 明久
日本金属学会秋大会 2008/09/23
-
Preparation of Porous Zr-based Glassy Alloys International-presentation
T. Wada, X. Wang, H. Kimura, A. Inoue
3rd International Workshop on NANO-BIO and AMORHOUS MATERIALS 2008/08
-
Preparation and Mechanical Properties of Pd-based Porous Bulk Glassy Alloys International-presentation
T. Wada, A. Inoue
2nd International Symposium on NANO and AMORPHOUS MATERIALS 2007/12/12
-
Fabrication of Zr-based Metallic Glassy Nanowires and Nanospheres International-presentation
Takeshi Wada, Dmitri V. Louzgine-Luzgin, Akihisa Inoue
The MRS fall meeting 2007/11/26
-
Fabrication of porous metals by Liquid metal dealloying Invited
T. Wada, H. Kato
Nanoporous Materials by Alloy Corrosion 2021/12/02
Industrial Property Rights 23
-
METHOD FOR PRODUCING POROUS MEMBER
Takeshi Wada, Hidemi Kato
特許U.S. Patent No.11,180,857 B2
Property Type: Patent
-
金属部材の製造方法
和田 武, 加藤 秀実
特許第6747670号
Property Type: Patent
-
ポーラス部材の製造方法
加藤 秀実, 和田 武
特許第6747673号
Property Type: Patent
-
ナノ複合金属部材の製造方法および相分離系金属固体同士の接合方法
加藤 秀実, 和田 武
特許第6710707号
Property Type: Patent
-
リチウム空気二次電池
野原 正也, 林 政彦, 由井 悠基, 阪本 周平, 小松 武志, 加藤 秀実, 和田 武, 森下 史弥
特許第6682102号
Property Type: Patent
-
多孔質黒鉛の製造方法および多孔質黒鉛
加藤 秀実, 兪 承根, 和田 武
特許第6506738号
Property Type: Patent
-
リチウム空気二次電池およびリチウム二次電池用の空気極の製造方法
野原 正也, 阪本 周平, 由井 悠基, 林 政彦, 中村 二朗, 加藤 秀実, 和田 武
特許第6344823号
Property Type: Patent
-
Metal member manufacturing method and metal member
Hidemi Kato, Takeshi Wada, Kunio Yubuta, Akihisa Inoue
特許US Patent No.9.279,186 B2
Property Type: Patent
-
多孔質シリコン複合体粒子及びその製造方法
吉田 浩一, 三好 一富, 久留須 一彦, 谷 俊夫, 幡谷 耕二, 西村 健, 加藤 秀実, 和田 武
特許第5877025号
Property Type: Patent
-
多孔質シリコン粒子及び多孔質シリコン複合体粒子並びにこれらの製造方法
吉田 浩一, 瀬川 春彦, 谷 俊夫, 西村 健, 加藤 秀実, 和田 武
特許第5830419号
Property Type: Patent
-
金属部材の製造方法および金属部材
加藤 秀実, 和田 武, 湯葢 邦夫, 井上 明久
特許第5678353号
Property Type: Patent
-
多孔質シリコン粒子及びその製造方法
吉田 浩一, 三好 一富, 久留須 一彦, 谷 俊夫, 幡谷 耕二, 西村 健, 加藤 秀実, 和田 武
特許第5598861号
Property Type: Patent
-
Ti−Cu−Zr−Pd金属ガラス合金
井上 明久, 王 新敏, 朱 勝利, 秦 風香, 和田 武
特許第5110469号
Property Type: Patent
-
多孔体
加藤 秀実, 和田 武, 柴田 悦郎、津田雅史
Property Type: Patent
-
生体活性化材料および生体活性化材料の製造方法
秦 風香, 王 新敏, 井上 明久, 和田 武
Property Type: Patent
-
ポーラス金属の製造方法およびポーラス金属
和田 武, 木村 久道, 井上 明久, 王 新敏
Property Type: Patent
-
生体活性化材料
吉村 昌弘, 小野木 伯薫, 安田 榮一, 渡辺 友亮, 田邊 靖博, 赤尾 勝, 松下 伸広, 杉山 直大, 干川 康人, 内藤 牧男, 塚本 雅裕, 小溝 裕一, 阿部 浩也, 阿部 信行, 井上 明久, 王 新敏, 和田 武, 朱 勝利, 秦 風香, 福原 幹夫
Property Type: Patent
-
金属ガラス生体活化法および生体活性化金属ガラス
吉村 昌弘, 小野木 伯薫, 安田 榮一, 渡辺 友亮, 田邊 靖博, 赤尾 勝, 松下 伸広, 杉山 直大, 干川 康人, 内藤 牧男, 塚本 雅裕, 小溝 裕一, 阿部 浩也, 阿部 信行, 井上 明久, 王 新敏, 和田 武, 朱 勝利, 秦 風香, 福原 幹夫
Property Type: Patent
-
アモルファス金属・金属ガラス接合体
野城 清, 中田 一博, 黒田 敏雄, 竹本 正, 藤井 英俊, 阿部 浩也, 津村 卓也, 前田 将克, 寺島 岳史, 西川 宏, 井上 明久, 木村 久道, 張 偉, ドミトリ ルズキン, 福原 幹夫, 王 新敏, 和田 武, 謝 国強, 関 一郎
Property Type: Patent
-
金属材料中気泡製造方法および気泡含有合金
長谷川 正, 和田 武, 永田 大輔
Property Type: Patent
-
ポーラス金属ガラスの製造方法とポーラス金属ガラス
井上 明久, 木村 久道, 和田 武, 王 新敏
Property Type: Patent
-
金属部材の製造方法および金属部材
和田武, 加藤秀実
Property Type: Patent
-
金属部材の製造方法および金属部材
和田武, 加藤秀実
Property Type: Patent
Research Projects 16
-
Establishment of Partial Liquid Metal Dealloying for New Nanoporous Alloy Synthesis by Thermodynamic Control of Solid-Liquid Phase Equilibrium
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (B)
Institution: Tohoku University
2023/04/01 - 2026/03/31
-
相分離する異種金属のデアロイング接合
加藤 秀実, 和田 武, 魏 代修
Offer Organization: 日本学術振興会
System: 科学研究費助成事業
Category: 基盤研究(A)
Institution: 東北大学
2021/04/05 - 2025/03/31
-
Mechanism and control of hydrogen storage and supply reactions under inner stress field induced by nano-interface with immiscible metals
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (B)
Institution: National Institute of Advanced Industrial Science and Technology
2021/04/01 - 2024/03/31
-
金属溶湯脱成分におけるポーラス金属生成機構解明と構造制御法確立
和田 武, 奥川 将行, 加藤 秀実
Offer Organization: 日本学術振興会
System: 科学研究費助成事業 基盤研究(C)
Category: 基盤研究(C)
Institution: 東北大学
2020/04/01 - 2023/03/31
-
ハイエントロピー効果に基づく新材料創製と新機能創出
加藤 秀実, 和田 武, 武藤 浩行, 武藤 泉, 佐々木 拓也, 西山 宣正
Offer Organization: 日本学術振興会
System: 科学研究費助成事業
Category: 新学術領域研究(研究領域提案型)
Institution: 東北大学
2018/06/29 - 2023/03/31
-
Alloy Design of High-Entropy Alloys Based on Screening Hypothesis and Statistical Decision Principle and Fabrications of New Alloys
Takeuchi Akira
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (B)
2017/04/01 - 2022/03/31
-
Development of fabrication process of a-Si by liquid quenching for mass production
OKADA JUNPEI
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (B)
Institution: Tohoku University
2018/04/01 - 2021/03/31
-
Effect of current flow on the kinetic of the liquid metal dealloying reaction and its application for nanoprous structural control
WADA Takeshi
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)
Category: Grant-in-Aid for Scientific Research (C)
Institution: Tohoku University
2015/04/01 - 2018/03/31
-
Development of open-cell type nanoporous silicon for long lifetime and high capacity lithium secondary battery electrode
Hidemi Kato
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (A)
Institution: Tohoku University
2013/04/01 - 2017/03/31
-
Fabrication of High-Entropy Bulk Metallic Glasses based on Confusion Principle, Clarification of their Properties and their Application
Takeuchi Akira
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (B)
Institution: Tohoku University
2012/04/01 - 2017/03/31
-
Development large-area and high aspect ratio metallic glass gratings for Talbot-Lau interferometer
KATO Hidemi, YASHIRO Wataru, WADA Takeshi
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Challenging Exploratory Research
Institution: Tohoku University
2014/04/01 - 2016/03/31
-
Development of bicontinuous Mg nanocomposites with superior hydrogen storage performances
WADA Takeshi
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B)
Category: Grant-in-Aid for Young Scientists (B)
Institution: Tohoku University
2012/04/01 - 2014/03/31
-
Preparation and application of nanoporous metals by using dealloying in a metallic melt
KATO HIDEMI, YUBUTA Kunio, WADA Takeshi
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Challenging Exploratory Research
Institution: Tohoku University
2011 - 2013
-
Intrinsic nanoscale inhomonegeity in metallic glass and its relation to mechanical properties
KATO Hidemi, WADA Takeshi, ICHITSUBO Tetsu, ABE Eiji
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research
Category: Grant-in-Aid for Scientific Research (B)
Institution: Tohoku University
2010 - 2012
-
Development of porous metallic glass for biomedical application
WADA Takeshi
Offer Organization: Japan Society for the Promotion of Science
System: Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B)
Category: Grant-in-Aid for Young Scientists (B)
Institution: Tohoku University
2009 - 2011
-
ポーラスバルク金属ガラスの創製と性質
和田 武
Offer Organization: 日本学術振興会
System: 科学研究費助成事業 若手研究(スタートアップ)
Category: 若手研究(スタートアップ)
Institution: 東北大学
2006 - 2007
Media Coverage 5
-
鉄とマグネシウム、強固に接合/東北大が基礎研究で成果
鉄鋼新聞
2023/04/03
Type: Newspaper, magazine
-
東北大、鉄とマグネシウムの強固な機械接合に成功
日本経済新聞電子版
2023/03/31
Type: Newspaper, magazine
-
スポンジ状炭素材料 東北大など 大容量蓄電池に道
日経産業新聞
2015/12/04
Type: Newspaper, magazine
-
東北大と京大、LIB用ポーラスシリコン粉末を開発ー容量大きく長寿命
日刊工業新聞
2014/07/15
Type: Newspaper, magazine
-
HD製造、短時間で安価に 先端医療など応用期待 東北大
河北新報
2013/07/31
Type: Newspaper, magazine
Other 1
-
ポーラス金属ガラスの開発