Details of the Researcher

PHOTO

Kizuku Kushimoto
Section
Institute of Multidisciplinary Research for Advanced Materials
Job title
Assistant Professor
Degree
  • 博士(環境科学)(東北大学)

  • 修士(工学)(同志社大学)

Researcher ID

Research History 2

  • 2019/03 - Present
    Tohoku University Institute of Multidisciplinary Research for Advanced Materials Assistant professor

  • 2022/05 - 2023/03
    The University of Melbourne Chemical Engineering University Guest (Academic)

Professional Memberships 3

  • 資源・素材学会

  • THE SOCIETY OF CHEMICAL ENGINEERS

  • THE SOCIETY OF POWDER TECHNOLOGY

Research Interests 5

  • Dispersion and Aggregation

  • Grinding

  • Discrete Element Method

  • Powder simulation

  • Powder processing

Research Areas 1

  • Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Transfer phenomena and unit operations / Powder Technology

Awards 8

  1. 粒子・流体プロセス部会 シンポジウム賞(奨励賞)

    2025/03 化学工学会 粒子破壊挙動を表現するシミュレーション手法の開発

  2. 日本粉体工業技術協会奨励賞 研究奨励賞

    2024/11 日本粉体工業技術協会 粉砕の自在制御の実現

  3. The 38th Powder Technology Paper Award

    2020/11 The Society of Powder Technology, Japan Measurement method for dispersion states of filler particles in particulate composite materials by macroscopic permittivity

  4. Best presentation award

    2017/05 The Society of Powder Technology, Japan

  5. Encouragement award

    2016/12 Tohoku University

  6. Presentation award (Bronze award)

    2016/11 The Society of Chemical Engineers, Japan

  7. Best presentation award

    2016/09 The Society of Chemical Engineers, Japan

  8. 同志社大学育英賞

    2013/02 同志社大学

Show all ︎Show 5

Papers 26

  1. Analysis of the Mechanism of Agglomeration during Wet Ball Milling by Using DEM-CFD Simulation Invited Peer-reviewed

    Kizuku Kushimoto, Akira Kondo, Takahiro Kozawa, Makio Naito, Junya Kano

    Transactions of the Indian Ceramic Society 84 (1) 42-48 2025/03/09

    Publisher: Informa UK Limited

    DOI: 10.1080/0371750x.2025.2472904  

    ISSN: 0371-750X

    eISSN: 2165-5456

  2. Numerical simulation of ductile metal powder compaction using advanced distinct element method Peer-reviewed

    Ryo Tokunaga, Daiki Hiruta, Kizuku Kushimoto, Junya Kano, Satoshi Motozuka

    Advanced Powder Technology 2025/03

    DOI: 10.1016/j.apt.2025.104782  

  3. Cross bond DEM (XB-DEM) for analyzing deformation and breakage behavior of particles

    Kizuku Kushimoto, Junya Kano

    Advanced Powder Technology 36 (2) 104762-104762 2025/02

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2024.104762  

    ISSN: 0921-8831

  4. Synthesis of novel colored substrate-free pearlescent pigments of vanadium phosphates with large-size layered platelet morphology Peer-reviewed

    Qiuyu Cheng, Yibei Xue, Takuya Hasegawa, Ayahisa Okawa, Kizuku Kushimoto, Junya Kano, Tohru Sekino, Shu Yin

    Journal of Alloys and Compounds 1010 177735-177735 2025/01

    Publisher: Elsevier BV

    DOI: 10.1016/j.jallcom.2024.177735  

    ISSN: 0925-8388

  5. Development of design method for wet stirred ball milling by simulation using DEM Peer-reviewed

    Kizuku Kushimoto, Akira Kondo, Takahiro Kozawa, Makio Naito, Junya Kano

    Advanced Powder Technology 35 (12) 104689-104689 2024/12

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2024.104689  

    ISSN: 0921-8831

  6. Analysis for Effects of Collision Velocity and Angle of Grinding Balls on Particle Grinding Behavior during Wet Ball Milling Peer-reviewed

    Kizuku Kushimoto, Junya Kano

    J. Soc. Powder Technol., Japan 61 (5) 258-267 2024/05

    DOI: 10.4164/sptj.61.258  

  7. Analysis of the particle collision behavior in spiral jet milling Peer-reviewed

    Kizuku Kushimoto, Kaya Suzuki, Shingo Ishihara, Rikio Soda, Kimihiro Ozaki, Junya Kano

    Advanced Powder Technology 34 (5) 103993-103993 2023/05

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2023.103993  

    ISSN: 0921-8831

  8. Self-assembly of nanoparticles and flake powders by flake design strategy via dry particle coating, Powder Technology International-coauthorship Peer-reviewed

    Genlian Fan, Qibing Liu, Akira Kondo, Makio Naito, Kizuku Kushimoto, Junya Kano, Zhanqiu Tan, Zhiqiang Li

    Powder Technology 418 (15) 118294 2023/01

    DOI: 10.1016/j.powtec.2023.118294  

  9. Development of a method for estimating particles mixing curves in short DEM simulation time Peer-reviewed

    Yuta Kato, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    Advanced Powder Technology 33 (12) 103841-103841 2022/12

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2022.103841  

    ISSN: 0921-8831

  10. Simple Adhesion Model between Different Kinds of Particles for Representing the Mixing Behavior of Different Food Powders Peer-reviewed

    Jumpei Kawamura, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    Journal of the Society of Powder Technology, Japan 58 (7) 354-366 2021/07/10

    Publisher: The Society of Powder Technology, Japan

    DOI: 10.4164/sptj.58.354  

    ISSN: 0386-6157

    eISSN: 1883-7239

  11. Development of Simpler Coarse-Grain Model for Analyzing Behavior of Particles in Fluid Flow Invited Peer-reviewed

    Kizuku Kushimoto, Kaya Suzuki, Shingo Ishihara, Rikio Soda, Kimihiro Ozaki, Junya Kano

    Processes 9 (7) 1098-1098 2021/06/24

    Publisher: MDPI AG

    DOI: 10.3390/pr9071098  

    eISSN: 2227-9717

    More details Close

    A new simpler coarse-grain model (SCG) for analyzing particle behaviors under fluid flow in a dilute system, by using a discrete element method (DEM), was developed to reduce calculation load. In the SCG model, coarse-grained (CG) particles were enlarged from original particles in the same way as the existing coarse-grain model; however, the modeling concept differed from the other models. The SCG model focused on the acceleration by the fluid drag force, and the CG particles’ acceleration coincided with that of the original particles. Consequently, the model imposed only the following simple rule: the product of particle density and squared particle diameter is constant. Thus, the model had features that can be easily implemented in the DEM simulation to comprehend the modeled physical phenomenon. The model was validated by comparing the behaviors of the CG particles with the original particles in the uniform and the vortex flow fields. Moreover, the usability of the SCG model on simulating real dilute systems was confirmed by representing the particle behavior in a classifier. Therefore, the particle behavior in dilute particle-concentration systems would be analyzed more simply with the SCG model.

  12. Single-particle crush test for ultrafine particles and direct numerical simulation of fracture process Peer-reviewed

    Rikio Soda, Shingo Ishihara, Kizuku Kushimoto, Junya Kano, Kimihiro Ozaki

    Powder Technology 384 387-401 2021/05

    Publisher: Elsevier BV

    DOI: 10.1016/j.powtec.2021.02.023  

    ISSN: 0032-5910

  13. Development of a new model for representing elastoplastic deformation and fracture behaviors of solid fats Peer-reviewed

    Jumpei Kawamura, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    Advanced Powder Technology 32 (3) 963-973 2021/03

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2021.02.007  

    ISSN: 0921-8831

    More details Close

    アクセプト

  14. Effect of ball collision direction on a wet mechanochemical reaction Peer-reviewed

    Takahiro Kozawa, Kayo Fukuyama, Kizuku Kushimoto, Shingo Ishihara, Junya Kano, Akira Kondo, Makio Naito

    Scientific Reports 11 (1) 2021/01

    Publisher: Springer Science and Business Media LLC

    DOI: 10.1038/s41598-020-80342-w  

    eISSN: 2045-2322

    More details Close

    <title>Abstract</title>Mechanochemical reactions can be induced in a solution by the collision of balls to produce high-temperature and high-pressure zones, with the reactions occurring through a dissolution–precipitation mechanism due to a change in solubility. However, only a fraction of the impact energy contributes to the mechanochemical reactions, while the rest is mainly consumed by the wear of balls and the heat generation. To clarify whether the normal or tangential component of collisions makes a larger contribution on the reaction, herein we studied the effect of collision direction on a wet mechanochemical reaction through combined analysis of the experimental reaction rates and simulated ball motion. Collisions of balls in the normal direction were found to contribute strongly to the wet mechanochemical reaction. These results could be used to improve the synthesis efficiency, predict the reaction, and lower the wear in the wet mechanochemical reactions.

  15. Analysis of the Effect of Ventilation Bars on the Packing Structure of Sinter Bed by DEM Simulation Peer-reviewed

    Shingo Ishihara, Kizuku Kushimoto, Junya Kano

    Energies 13 (15) 3836-3836 2020/07/27

    Publisher: MDPI AG

    DOI: 10.3390/en13153836  

    eISSN: 1996-1073

    More details Close

    The effect of ventilation bars on the porosity of a sinter bed charged on a sinter machine was investigated. The behavior of the sinter feed was calculated by discrete element method (DEM) simulation. By taking into account the adhesion force, the sinter feed in the wet state was represented and the simulation parameters were determined to reproduce the experimental values of the angle of repose. The porosity of the sinter bed was calculated, and the mechanism of the formation of the packing structure and the cause of the distribution of porosity in each region were clarified. As a result, it is shown that in the case of shear flow, the higher the powder pressure during flow, the higher the porosity.

  16. Development of a method for determining the maximum van der Waals force to analyze dispersion and aggregation of particles in a suspension Peer-reviewed

    Kizuku Kushimoto, Shingo Ishihara, Samuel Pinches, Mitchell L. Sesso, Shane P. Usher, George V. Franks, Junya Kano

    Advanced Powder Technology 31 (6) 2267-2275 2020/06

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2020.03.021  

    ISSN: 0921-8831

  17. Relationship between Grinding Results in a Planetary Ball Mill with Liquid Media and the Distribution of Ball Impact Energy Calculated by DEM Simulation Peer-reviewed

    Akira Kondo, Shingo Ishihara, Kizuku Kushimoto, Takahiro Kozawa, Junya Kano, Makio Naito

    Journal of the Society of Powder Technology, Japan 57 (4) 176-183 2020/04/10

    Publisher: The Society of Powder Technology, Japan

    DOI: 10.4164/sptj.57.176  

    ISSN: 0386-6157

    eISSN: 1883-7239

  18. Correlation between Grinding Results in a Tumbling Ball Mill with Liquid Media and the Distribution of Ball Impact Energy Calculated by DEM Simulation Peer-reviewed

    Akira Kondo, Shingo Ishihara, Kizuku Kushimoto, Takahiro Kozawa, Junya Kano, Makio Naito

    J. Soc. Powder Technol., Japan 56 (11) 608-614 2019/11

    DOI: 10.4164/sptj.56.608  

    ISSN: 1883-7239 0386-6157

  19. Search for Factors Controlling Flow Behavior of Food Powder and Simple Adhesion Model Simulation Peer-reviewed

    Jumpei Kawamura, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    J. Soc. Powder Technol., Japan 56 (11) 598-607 2019/11

    DOI: 10.4164/sptj.56.598  

    ISSN: 1883-7239 0386-6157

  20. Determination Method of Coefficients of Particle and Rolling Friction in Distinct Element Method Peer-reviewed

    Ryo Watanabe, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    J. Soc. Powder Technol., Japan 56 (4) 218-225 2019/04

    DOI: 10.4164/sptj.56.218  

    ISSN: 1883-7239 0386-6157

  21. Development of ADEM–CFD model for analyzing dynamic and breakage behavior of aggregates in wet ball milling Peer-reviewed

    Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    Advanced Powder Technology 30 (6) 1131-1140 2019/03

    DOI: 10.1016/j.apt.2019.03.008  

    ISSN: 1568-5527 0921-8831

  22. Correlation between Grinding Results in a Tumbling Ball Mill with Liquid Media and the Analysis of Ball Motions Using DEM Simulation Peer-reviewed

    Akira Kondo, Shingo Ishihara, Kizuku Kushimoto, Takahiro Kozawa, Junya Kano, Makio Naito

    J. Soc. Powder Technol., Japan 56 (3) 148-155 2019/03

    DOI: 10.4164/sptj.56.148  

    ISSN: 1883-7239 0386-6157

  23. Development of the Simulation for Deformation Behavior of Metal Particles by Distinct Element Method Peer-reviewed

    Kosuke Ono, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    J. Soc. Powder Technol., Japan 56 (2) 58-65 2019/02

    DOI: 10.4164/sptj.56.58  

    ISSN: 1883-7239 0386-6157

  24. Measurement Method for Dispersion States of Filler Particles in Particulate Composite Materials by Macroscopic Permittivity Peer-reviewed

    Kizuku Kushimoto, Mika Moriyama, Atsuko Shimosaka, Yoshiyuki Shirakawa, Jusuke Hidaka, Shingo Ishihara, Junya Kano

    Journal of the Society of Powder Technology, Japan 56 (1) 4-14 2019/01/10

    Publisher: The Society of Powder Technology, Japan

    DOI: 10.4164/sptj.56.4  

    ISSN: 0386-6157

    eISSN: 1883-7239

  25. Analysis for behavior of particles to be ground between grinding balls in wet ball milling Peer-reviewed

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    J. Jpn. Soc. Powder Powder Metallurgy 65 (10) 664-672 2018/10

    DOI: 10.2497/jjspm.65.664  

    ISSN: 0532-8799

  26. ADEM Simulation for the Analysis of Breakage Behavior of Powder Compact Peer-reviewed

    Shingo Ishihara, Kizuku Kushimoto, Junya Kano, Makio Naito

    J. Soc. Powder Technol., Japan 55 (9) 492-498 2018/09

    DOI: 10.4164/sptj.55.492  

    ISSN: 1883-7239 0386-6157

Show all ︎Show first 5

Misc. 12

  1. メルボルン大学渡航記

    久志本築

    粉体工学会誌 61 (8) 2024/08

  2. 第 60 回粉体に関する討論会報告記

    久志本築

    粉体工学会誌 61 (3) 2024/03

  3. スラリー中の粒子の分散凝集挙動のシミュレーションによる表現 Invited

    KIZUKU KUSHIMOTO, JUNYA KANO

    94 (1) 16-20 2024/01

  4. 旋回流型ジェットミル内粒子挙動のシミュレーション解析 Invited

    Kizuku Kushimoto, Junya Kano

    Fine Ceramics Report 41 (4) 164-169 2023/10

  5. 湿式粉砕過程における砕料粒子挙動の解析 Invited

    久志本築, 石原真吾, 加納純也

    粉体技術 13 (9) 34-40 2021/09

  6. 湿式粉砕過程における砕料粒子径の予測法とソフトウェアKIK-DEM Invited

    石原真吾, 久志本築, 加納純也, 近藤光, 小澤隆広, 内藤牧男

    13 (9) 27-33 2021/09

  7. Fundamentals and Practice of Powder Simulation -General Introduction- Invited

    Kizuku KUSHIMOTO, Junya KANO

    『化学装置』2021年9月号別冊 177-185 2021/08

  8. Measurement method for dispersion states of filler particles in particulate composite materials by macroscopic permittivity Invited

    Kizuku Kushimoto, Mika Moriyama, Atsuko Shimosaka, Yoshiyuki Shirakawa, Jusuke Hidaka, Shingo Ishihara, Junya Kano

    Advanced Powder Technology 32 (1) 272-282 2021/01

    Publisher: Elsevier BV

    DOI: 10.1016/j.apt.2020.12.003  

    ISSN: 0921-8831

  9. 粉体シミュレーションの基礎と実際ー総論ー Invited

    久志本築, 加納純也

    化学装置 62 (12) 40-48 2020/12

  10. Analysis of Motion and Breakage of Ceramics Particles During Wet Ball Milling Invited

    Kizuku KUSHIMOTO, Junya KANO

    Ceramics 9 (55) 668-671 2020/09

  11. Analysis for behavior of sandwiched particles between two balls in liquid Invited

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    PHARM TECH JAPAN 36 (1) 45-49 2020/01

  12. Analysis for Behavior of Particles in Wet Ball Milling by Means of Simulation Invited

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    The Micromeritics 63 51-60 2020

    DOI: 10.24611/micromeritics.2020011  

Show all ︎Show first 5

Books and Other Publications 2

  1. 基礎と現場から学ぶ 最新粉体技術

    久志本築

    日本工業出版 2024/02/20

    ISBN: 4819035142

  2. 高分子微粒子の最新技術動向

    シーエムシー出版 2022/07

    ISBN: 9784781316710

Presentations 136

  1. 粒子破壊挙動を表現するシミュレーション手法の開発 Invited

    久志本築

    化学工学会第90年会 2025/03/12

  2. 湿式ボールミル内砕料粒子挙動のシミュレーションを用いた解析 Invited

    久志本築

    第18回機能性粉体プロセス研究会 2024/12/23

  3. Solubilization of lignocellulosic biomass by milling with heating International-presentation

    Honami Hanabusa, Toru Joboji, Kizuku Kushimoto, Atsushi Fukuoka, Junya Kano

    The 9th Asian Particle Technology Symposium(APT2024) 2024/12/04

  4. ADEM simulation validation for the construction of grinding theory International-presentation

    Haruki Mochizuki, Kizuku Kushimoto, Junya Kano

    The 9th Asian Particle Technology Symposium(APT2024 2024/12/04

  5. Simulation analysis of particle behavior during wet ball milling International-presentation

    Kizuku Kushimoto, Junya Kano

    The 9th Asian Particle Technology Symposium(APT2024) 2024/12/03

  6. ボールミル中の砕料粒子粉砕挙動のシミュレーション解析

    久志本築

    POWTEX2024アカデミックコーナー 2024/11/28

  7. ADEMによる等方および異方性形状を有する純鉄粒子の圧縮成形シミュレーション

    德永涼, 蛭田大稀, 久志本築, 加納純也

    2024年度秋期研究発表会(一般社団法人粉体工学会 2024/11/26

  8. ADEM延性モデルを用いた金属粉粒体の扁平挙動に関するシミュレーション

    岡田貴大, 久志本築, 加納純也

    2024年度秋期研究発表会(一般社団法人粉体工学会) 2024/11/26

  9. Development of a simulation for particle and oil behavior under shear field International-presentation Invited

    Kizuku Kushimoto

    Tohoku-Melbourne Joint Workshop in Materials Science 2024/11/06

  10. ナノ粉体プロセスの高度化に向けた シミュレーション手法の開発および応用 Invited

    久志本築

    第17回機能性粉体プロセス研究会 2024/10/23

  11. ADEMシミュレーションにおける連結ばね定数決定方法の開発

    Bae Jong Hyun, 久志本築, 加納純也

    化学工学会 第55回秋季大会 2024/09/13

  12. 粒子破壊挙動を表現するシミュレーション手法の開発

    久志本築, 加納純也

    化学工学会 第55回秋季大会 2024/09/13

  13. 電気力分離における成分分離メカニズムの解析

    久志本築, 浅野聡, 渡邉寛人, 加納純也

    資源・素材2024(秋田) 2024/09/10

  14. 混練プロセス中の粒子濡れ・分散挙動のモデリング

    久志本築, 加納純也

    第58回技術討論会(一般社団法人粉体工学会 2024/07/25

  15. ADEM延性モデルによる金属粉粒体の扁平化メカニズムの解析

    岡田貴大, 久志本築, 加納純也

    2024(令和6)年度 資源・素材学会東北支部春季大会 2024/06/14

  16. Analysis of the effects of collision situation of grinding balls on particle grinding behavior in wet ball milling

    Kizuku Kushimoto, Junya Kano

    2024/05/15

  17. クラスター構造係数を用いたADEMシミュレーションにおける連結ばね定数の決定方法

    Bae Jonh Hyun, 久志本築, 加納純也

    2024年度春期研究発表会(一般社団法人粉体工学会) 2024/05/14

  18. ADEMシミュレーションによる粒子破砕様式の遷移過程解析

    望月陽生, 久志本築, 加納純也

    2024年度春期研究発表会(一般社団法人粉体工学会) 2024/05/14

  19. DEMによる非ブラウン高濃度スラリーにおけるシアシックニングのメカニズム解析

    蛭田大稀, 久志本築, 加納純也

    化学工学会第89年会 2024/03/20

  20. ADEM延性破壊モデルを用いた金属粉粒体の扁平挙動に関するシミュレーション

    岡田貴大, 久志本築, 加納純也

    第23回東北大学多元物質科学研究所研究発表会 2023/12/07

  21. ADEMシミュレーションによる鉄鉱石ペレットの破壊挙動再現

    望月陽生, 久志本築, 石原真吾, 加納純也

    第23回東北大学多元物質科学研究所研究発表会 2023/12/07

  22. ボール衝突挙動が砕料粒子の粉砕に及ぼす影響の解析

    久志本築, 加納純也

    第60回粉体に関する討論会 2023/11/09

  23. Development of the simulation for particle behavior in oil-water system Invited

    Kizuku Kushimoto

    Tohoku-Melbourne Joint Workshop in Materials Science 2023/11/01

  24. ボールミルでの困りごとはシミュレーションで解決!

    久志本 築

    APPIE産学官連携フェア2023 2023/10/12

  25. 液液界面近傍での粒子挙動を表現するシミュレーション手法の開発

    久志本築, George Franks, 加納純也

    2023年度秋期研究発表会(粉体工学会) 2023/10/11

  26. 高レイノルズ数流体中の粒子粗視化モデルの開発

    友利洋輝, 曽田力央, 山本通典, 久志本築, 加納純也

    2023年度秋期研究発表会(粉体工学会) 2023/10/10

  27. Analysis for the effect of the mixing of particles with different sizes on shear thickening in concentrated slurries

    Daiki Hiruta, Kizuku Kushimoto, Junya Kano

    9th International Conference on Discrete Element Methods(DEM9) 2023/09/21

  28. Analysis for dispersion and aggregation behavior of particles during wet ball milling

    Kizuku Kushimoto, Junya Kano

    9th International Conference on Discrete Element Methods(DEM9) 2023/09/21

  29. 電気力による銅製錬副産物中の有価金属選別手法の開発

    久志本築, 石原真吾, 加納純也, 浅野聡

    資源・素材2023 2023/09/13

  30. Analysis for aggregation during ball milling process

    K. Kushimoto, J. Kano

    2023/09/11

  31. 液中の媒体ボール衝突角度が粉砕に及ぼす影響の解析

    久志本 築, 加納 純也

    第57回技術討論会(一般社団法人粉体工学会) 2023/07/27

  32. Analysis of ground particle behavior in wet ball milling by DEM-CFD simulation

    K.Kushimoto, J.Kano

    18th European Conference on Solid State Chemistry 2023/07/10

  33. DEMを用いた高濃度スラリーのシアシックニングにおよぼす粒子径分布の影響

    蛭田大稀, 久志本築, 石原真吾, 加納純也

    2023年度春期研究発表会(粉体工学会) 2023/05/15

  34. 湿式ボールミルにおけるシミュレーションの活用 Invited

    2023/04/19

  35. DEMを用いた高粘度分散媒中のボールミル粉砕速度予測

    鈴木太久哉, 久志本築, 石原真吾, 加納純也

    第22回東北大学多元物質科学研究所研究発表会 2022/12/08

  36. 高濃度スラリーのシアシックニングに及ぼす粒子特性の影響

    蛭田大稀, 久志本築, 石原真吾, 加納純也

    第22回東北大学多元物質科学研究所研究発表会 2022/12/08

  37. Modelling of particle behaviour on fluid interface for analysis of microstructure formation mechanism

    Kizuku Kushimoto

    Tohoku-Melbourne Joint Workshop in Materials Science 2022/11/24

  38. Analysis of the effect of particle size and distribution on shear thickening in concentrated slurries

    Daiki Hiruta, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    Tohoku-Melbourne Joint Workshop in Materials Science 2022/11/24

  39. Effect of dispersant viscosity on milling speed in wet ball milling

    Takuya Suzuki, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    Tohoku-Melbourne Joint Workshop in Materials Science 2022/11/24

  40. Shear thickening mechanism analysis of concentrated slurry by Coupled DEM and CFD simulation

    Daiki Hiruta, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    The 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 57th Summer Symposium on Powder Technology(ICCCI2022) 2022/11/16

  41. Prediction of the milling speed under highly viscous condition with DEM simulation

    Takuya Suzuki, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    The 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 57th Summer Symposium on Powder Technology(ICCCI2022) 2022/11/16

  42. 高濃度スラリーの流動シミュレーションとシアシックニングのメカニズム解析

    蛭田大稀, 久志本築, 石原真吾, 加納純也

    化学工学会第53回秋季大会(長野) 2022/09/14

  43. 電気力分離による銅製錬副産物からの有価金属分離手法の開発

    石原真吾, 久志本築, 加納純也, 浅野聡

    資源・素材 2022(福岡) 2022/09/06

  44. スラリー濃度がボールミル粉砕に与える影響の解析

    鈴木太久哉, 久志本築, 石原真吾, 加納純也

    2022年度春期研究発表会(粉体工学会) 2022/05/17

  45. 高濃度スラリーのシアシックニングのメカニズム解析

    蛭田 大稀, 久志本 築, 石原 真吾, 加納 純也

    2022年度春期研究発表会(粉体工学会) 2022/05/17

  46. 湿式ボールミル中の砕料粒子捕獲挙動の解析

    久志本築, 加納純也

    化学工学会第87年会 2022/03/18

  47. シミュレーションを活用した新たな粉粒体混合曲線予測法の開発

    加藤 裕太, 久志本 築, 石原 真吾, 加納 純也

    第21回東北大学多元物質科学研究所研究発表会 2021/12/09

  48. 湿式ボールミルにおける高濃度スラリーおよびボールの挙動のシミュレーション

    鈴木 太久哉, 久志本 築, 石原 真吾, 加納 純也

    第3回環境科学討論会 2021/11/05

  49. Analysis of particle dispersion behavior in kneading process by DEM-CFD simulation

    Yuki Kondo, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    8th Asian Particle Technology Symposium(APT2021) 2021/10/13

  50. Development of estimation method for particles mixing behavior using DEM

    Yuta Kato, Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    8th Asian Particle Technology Symposium(APT2021) 2021/10/13

  51. Analysis for the re-aggregation mechanism under wet ball milling

    Kizuku Kushimoto, Shingo Ishihara, Junya Kano

    8th Asian Particle Technology Symposium(APT2021) 2021/10/12

  52. 電気力分離による銅製錬工程未回収有価金属の選別方法の開発

    久志本築, 石原真吾, 浅野聡, 加納純也

    資源・素材2021(札幌)2021年度 資源・素材関係学協会合同秋季大会 2021/09/14

  53. DEMを用いた初期混合分離挙動に基づく混合曲線の予測

    加納裕太, 久志本築, 石原真吾, 加納純也

    第58回粉体に関する討論会 2021/09/07

  54. 湿式ボールミリングにおけるセラミックス粒子挙動の解析 Invited

    加納純也, 久志本築

    第34回秋季シンポジウム(日本セラミックス協会) 2021/09/02

  55. 湿式転動ミルにおける高粘度液中ボール挙動のモデリング

    鈴木 太久哉, 久志本 築, 石原 真吾, 加納 純也

    粉体工学会 2021年度春期研究発表会 2021/06/02

  56. 混練プロセスにおける粒子分散挙動の DEM-CFD 数値解析

    近藤 佑樹, 久志本 築, 石原 真吾, 加納 純也

    粉体工学会 2021年度春期研究発表会 2021/06/02

  57. DEM を用いた粉粒体混合度を短時間で予測可能なモデルの開発

    加藤 裕太, 久志本 築, 石原 真吾, 加納 純也

    粉体工学会 2021年度春期研究発表会 2021/06/02

  58. DEMシミュレーションを用いた粉粒体混合挙動の予測

    加藤裕太, 久志本築, 石原真吾, 加納純也

    第20回東北大学多元物質科学研究所研究発表会 2020/12

  59. Analysis for motion and breakage behavior of particles under wet ball milling by using ADEM-CFD model Invited

    Kizuku KUSHIMOTO

    2020 Online Joint Symposium Engineer a Better Tomorrow 2020/11/30

  60. Analysis of the Effect of Powder Heterogeneity in Compression Molding

    Kondo yuki, Kizuku KUSHIMOTO, Shigo ISHIHARA, Junya KANO

    The 4th Symposium for The Core Research Cluster for Materials Science and the 3rd Symposium on International Joint Graduate Program in Materials Science “Create New Value of Materials Science through Broad 2020/11/16

  61. 乾式粉体シミュレーションの最新動向 Invited

    加納純也, 久志本築

    2020年度秋期研究発表会(粉体工学会) 2020/11/18

  62. Measurement method for dispersion states of filler particles in particulate composite materials by macroscopic permittivity Invited

    Kizuku Kushimoto, Mika Moriyama, Atsuko Shimosaka, Yoshiyuki Shirakawa, Jusuke Hidaka, Shingo Ishihara, Junya Kano

    The Society of Powder Technology, Japan 2020/11/17

  63. 転動造粒過程における核生成挙動のDEM-SPHを用いたモデル化

    中洌智郎, 久志本築, 石原真吾, 加納純也

    2020年度秋期研究発表会(粉体工学会) 2020/11/17

  64. ジェットミル内砕料粒子の運動と粉砕場の解析

    鈴木佳弥, 久志本築, 石原真吾, 加納純也

    2020年度秋期研究発表会(粉体工学会) 2020/11/17

  65. 遊星ボールミルにおける媒体表面温度の推算

    宮本淳生, 久志本築, 石原真吾, 加納純也

    2020年度秋期研究発表会(粉体工学会) 2020/11/17

  66. DEMシミュレーションを用いた粉粒体混合挙動の予測

    加藤裕太, 久志本築, 石原真吾, 加納純也

    第2回環境科学討論会 2020/10/30

  67. 圧縮成形における粉体不均質性の影響の解析

    近藤佑樹, 久志本築, 石原真吾, 加納純也

    第2回環境科学討論会 2020/10/30

  68. Analysis of Evaluation for Filler Dispersion States and Dispersion Process Invited

    Kizuku KUSHIMOTO

    2020/09/25

  69. 液中ボールミル粉砕実験結果のDEMシミュレーションを用いた解析

    近藤 光, 石原 真吾, 久志本 築, 小澤 隆弘, 加納 純也, 内藤 牧男

    日本セラミックス協会 第33回秋季シンポジウム 2020/09

  70. 粉末冶金の圧縮成形工程における粒子変形・緻密化挙動の解析

    渡邊亮, 久志本築, 石原真吾, 加納純也

    第19回東北大学多元物質科学研究所研究発表会 2019/12/13

    More details Close

    多元物質科学研究所所長賞 受賞

  71. ADEM simulation for analysis of compaction behavior of deformable particles International-presentation

    Ryo WATANABE, Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    An-Pang Tsai Memorial Joint Symposium of Taipei Tech and Tohoku University 2019/11/26

  72. 液中で接近する媒体ボール間における砕料粒子挙動の解析

    久志本築, 石原真吾, 加納純也

    第57回粉体に関する討論会 2019/11/25

  73. Numerical Simulation for Analysis and Design of Powder Processing International-presentation

    Junya KANO, Kizuku KUSHIMOTO, Shingo ISHIHARA, Akira KONDO, Takahiro KOZAWA, Makio NAITO

    Visual-JW 2019 & WSE 2019 2019/11/21

  74. 液中で接近する媒体ボール間での砕料粒子挙動の解析

    久志本築

    粉体工学会 第6回機能性粉体プロセス研究会 2019/11/15

  75. SPH-DEMによる2粒子間に形成される液架橋付着力の解析

    中洌智郎, 久志本築, 石原真吾, 加納純也

    化学工学会 粒子・流体プロセス部会 粉体プロセス分科会 第一回粉体プロセス研究会 2019/11/13

    More details Close

    化学工学会粉体プロセス分科会 発表奨励賞 受賞

  76. Analysis for the effect of ball behavior on grinding in wet ball milling International-presentation

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    Tohoku-Melbourne Joint Workshop - Materials Science 2019/11/09

  77. Analysis for the behavior of particles in wet ball milling by DEM-CFD simulation International-presentation

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    The 13th Pacific Rim Conference of Ceramic Societies 2019/10/27

  78. 湿式ボールミルの粉砕メカニズムに基づく装置設計法を紹介します

    久志本築, 石原真吾, 加納純也

    APPIE産学官連携フェア2019 シーズとニーズのマッチング -粉の技術- 2019/10/17

  79. 食品粉体の流動特性の把握とそのシミュレーション

    河村順平, 久志本築, 石原真吾, 加納純也

    粉体工学会2019年度秋期研究発表会 2019/10/14

  80. 粒子間圧密を考慮した造粒シミュレーションモデル

    木村魁斗, 久志本築, 石原真吾, 加納純也

    粉体工学会2019年度秋期研究発表会 2019/10/14

    More details Close

    粉体工学会ベストポスター賞 受賞

  81. ジェットミルの粉砕メカニズム解明のための数値解析

    鈴木佳弥, 久志本築, 石原真吾, 加納純也

    粉体工学会2019年度秋期研究発表会 2019/10/14

  82. 液中における媒体ボールの運動が砕料粒子挙動に及ぼす影響

    久志本築, 石原真吾, 加納純也

    粉体工学会2019年度秋期研究発表会 2019/10/14

  83. 液中ボールミルにおける媒体運動のDEMシミュレーション結果と粉砕実験結果の比較検討

    近藤光, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男

    粉体工学会第 54 回技術討論会 2019/09/03

  84. ボールミル粉砕予測のためのシミュレーションツール開発

    石原真吾, 近藤光, 久志本築, 小澤隆弘, 加納純也, 内藤牧男

    粉体工学会第 54 回技術討論会 2019/09/03

  85. DEM-CFD連成シミュレーションによる湿式ボールミル内の砕料粒子挙動の解析

    久志本築, 石原真吾, 加納純也

    粉体工学会第 54 回技術討論会 2019/09/03

  86. ADEM simulation for compaction process International-presentation

    Ryo Watanabe, Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    8th International Conference on Discrete Element Methods 2019/07/21

  87. Simulation model of particle nucleus growth in rolling granulation International-presentation

    Kaito KIMURA, Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    8th International Conference on Discrete Element Methods 2019/07/21

  88. 湿式ボールミル中の砕料粒子挙動のシミュレーションによる解析

    久志本築, 石原真吾, 加納純也

    第5回東北大学若手研究者アンサンブルワークショップ 2019/06/07

  89. 塑性変形を伴う粉体圧縮成形のシミュレーション

    渡邊亮, 久志本築, 石原真吾, 加納純也

    粉体工学会2019年度春期研究発表会 2019/05/09

    More details Close

    粉体工学会ベストプレゼンテーション賞 受賞

  90. 湿式ボールミルにおける凝集性砕料粒子の運動挙動の解析

    久志本築, 石原真吾, 加納純也

    粉体工学会2019年度春期研究発表会 2019/05/09

  91. 金属粉粒体の変形破壊挙動へのADEMの応用

    小野宏輔, 久志本築, 石原真吾, 加納純也

    化学工学会 第84年会 2019/03/13

  92. 液架橋力を考慮したDEMシミュレーションによる転動造粒挙動の解析

    木村魁斗, 久志本築, 石原真吾, 加納純也

    粉体工学会2018年度秋期研究発表会 2018/11/27

  93. DEMシミュレーションを用いた湿潤粉体における混合過程の解析

    浅野領仁, 久志本築, 石原真吾, 加納純也

    粉体工学会2018年度秋期研究発表会 2018/11/27

  94. MPS法による粒子充填層内におけるガス流れの解析

    片岡久人, 久志本築, 石原真吾, 加納純也

    粉体工学会2018年度秋期研究発表会 2018/11/27

  95. 金属粉粒体の変形挙動モデリングとシミュレーション

    小野宏輔, 久志本築, 石原真吾, 加納純也

    第56回粉体に関する討論会 2018/09/25

  96. 湿式ボールミルにおける媒体と砕料粒子の挙動解析

    加納純也, 久志本築, 石原真吾

    化学工学会第50回秋季大会 2018/09/18

  97. 湿式ボールミル中を運動する媒体ボール周りの砕料粒子挙動の解析

    加納純也, 久志本築, 石原真吾

    粉体工学会第 53 回技術討論会 2018/09/03

  98. Evaluation of mixing behavior of wet powders by distinct element method International-presentation

    Ryoji ASANO, Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    CHISA2018 2018/08/25

  99. Development of the simulation model for deformation behaviour of metal particle International-presentation

    Kosuke ONO, Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    CHISA2018 2018/08/25

  100. Analysis of the relationship of permeability in the particle packed bed by MPS method International-presentation

    Hisato KATAOKA, Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    CHISA2018 2018/08/25

  101. DEM simulation for the analysis of ball behavior in wet ball milling International-presentation

    Shingo ISHIHARA, Akira KONDO, Kizuku KUSHIMOTO, Takahiro KOZAWA, Junya KANO, Makio NAITO

    ICCCI2018 2018/07/09

  102. 粒子充填層が通気性に及ぼす影響の解析

    石原真吾, 久志本築, 片岡久人, 加納純也

    日本学術振興会製銑第54委員会 2018/06/28

  103. DEMシミュレーションにおける粒子の摩擦係数の決定法

    渡邊亮, 久志本築, 石原真吾, 加納純也

    粉体工学会2018年度春期研究発表会 2018/05/15

  104. 湿式ボールミル中での凝集力を考慮した微粒子運動挙動の解析

    久志本築, 石原真吾, 加納純也

    粉体工学会2018年度春期研究発表会 2018/05/15

  105. 湿式ボールミリングにおける媒体と砕料粒子挙動のシミュレーション Invited

    加納純也, 久志本築, 石原真吾

    平成30年度春季大会(粉体粉末冶金協会) 2018/05/14

  106. 湿式ボールミルにおける媒体ボールと砕料粒子挙動の解析

    久志本築, 石原真吾, 加納純也

    化学工学会第83年会 2018/03/15

  107. Characterization of alumina slurry affected by shear rate International-presentation

    Shingo ISHIHARA, Kizuku KUSHIMOTO, Junya KANO

    IMM2018 2018/03/01

  108. MPS法による粒子充填層の通気性の解析

    片岡久人, 久志本築, 石原真吾, 加納純也

    第17回東北大学多元物質科学研究所研究発表会 2017/12/04

  109. DEMシミュレーションにおける粒子パラメータの決定方法

    渡邊亮, 久志本築, 石原真吾, 加納純也

    第55回粉体に関する討論会 2017/11/13

  110. 粒子充填層内の充填構造と通気性の関係の解析

    片岡久人, 久志本築, 石原真吾, 加納純也

    第55回粉体に関する討論会 2017/11/13

  111. 金属粉末の変形挙動シミュレーションモデルの開発

    小野宏輔, 久志本築, 石原真吾, 加納純也

    第55回粉体に関する討論会 2017/11/13

  112. DEMシミュレーションによる湿潤性粉体の混合挙動解析

    浅野領仁, 久志本築, 石原真吾, 加納純也

    第55回粉体に関する討論会 2017/11/13

  113. 媒体ボール周辺の粒子挙動と凝集粒子の破壊挙動の解析

    久志本築, 石原真吾, 加納純也

    第55回粉体に関する討論会 2017/11/13

  114. 媒体ミルにおける延性材料の変形挙動シミュレーションの開発

    小野宏輔, 久志本築, 石原真吾, 加納純也

    粉体工学会 2017年度 秋期研究発表会 2017/10/10

    More details Close

    粉体工学会ベストポスター賞 受賞

  115. MPS法による粒子充填層内の通気性の解析

    片岡久人, 久志本築, 石原真吾, 加納純也

    粉体工学会 2017年度 秋期研究発表会 2017/10/10

  116. ADEM-CFD連成シミュレーションによる流体中での微粒子破壊挙動の解析

    久志本築, 石原真吾, 加納純也

    粉体工学会 2017年度 秋期研究発表会 2017/10/10

  117. ADEMによる流体中での凝集粒子破壊挙動の解析

    久志本築, 石原真吾, 加納純也

    化学工学会 第49回秋季大会 2017/09/20

  118. 湿潤性粉体における粉体混合特性の評価

    浅野領仁, 久志本築, 石原真吾, 加納純也

    化学工学会 第49回秋季大会 2017/09/20

  119. Analysis for the Breakage Behaviors of Aggregated particles between One Medium Ball and the Vessel International-presentation

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    The 7th Asian Particle Technology Symposium 2017/07/30

  120. ADEMによる金属材料の破壊モデリング

    小野宏輔, 久志本築, 石原真吾, 加納純也

    粉体工学会2017年度春期研究発表会 2017/05/16

  121. 粒子充填層内の構造と通気性の関係の解析

    片岡久人, 久志本築, 石原真吾, 加納純也

    粉体工学会2017年度春期研究発表会 2017/05/16

  122. 媒体ボールによる流体中での凝集粒子破壊挙動の解析

    久志本築, 石原真吾, 加納純也

    粉体工学会2017年度春期研究発表会 2017/05/16

    More details Close

    粉体工学会ベストプレゼンテーション賞 受賞

  123. 粒子軟化溶融現象が充填層通気性に及ぼす影響の解析

    石原真吾, 久志本築, 加納純也

    一般社団法人日本鉄鋼協会 第 173 回春季講演大会 2017/03/15

  124. 誘電率による微粒子複合材料中フィラーの粒子径分布推算

    久志本築, 石原真吾, 加納純也, 森山美果, 筬部周浩, 日高重助

    化学工学会第82年会 2017/03/06

  125. 粒子状物質の誘電率測定法の開発

    森山美果, 久志本築, 加納純也, 日高重助

    化学工学会第82年会 2017/03/06

  126. ADEMとDNSのカップリングシミュレーションによる凝集粒子破壊挙動の解析

    久志本築, 石原真吾, 加納純也

    第16回東北大学多元物質科学研究所研究発表会 2016/12/07

  127. ADEMによる微粒子分散挙動の解析

    久志本築, 石原真吾, 加納純也

    粉体工学会2016年度秋期研究発表会 2016/11/29

  128. 粘性流体中での凝集粒子分散挙動のシミュレーション

    久志本築, 石原真吾, 加納純也

    化学工学会福島大会2016 (3支部合同大会) 2016/11/25

    More details Close

    平成28年度化学工学会福島大会学生賞 (銅賞) 受賞

  129. Analysis of the breakage behavior for aggregates under shear field with ADEM simulation International-presentation

    Kizuku KUSHIMOTO, Shingo ISHIHARA, Junya KANO

    Tohoku-Melbourne Day/Material Science Research Workshop 2016/11/09

  130. 微粒子が分散した複合材料誘電率の推算

    久志本築, 下坂厚子, 白川善幸, 日高重助, 石原真吾, 加納純也, 森山美果, 萱野義貞

    化学工学会第48回秋期大会 2016/09/06

    More details Close

    化学工学会粒子・流体プロセス部会シンポジウム賞 (ベストプレゼンテーション賞) 受賞

  131. 誘電率による微粒子複合材料内フィラー粒子分散状態の計測

    久志本築, 石原真吾, 加納純也

    2016年度第1回粉体操作に伴う諸現象に関する勉強会 2016/07/28

  132. 誘電率による微粒子複合材料におけるフィラー粒子分散状態の高効率計測方法の開発

    久志本築, 石原真吾, 加納純也

    資源・素材学会東北支部 平成28年度総会・春季大会 2016/07/07

  133. New quantitative evaluation method of the dispersion state of filler particles using the permittivity of sealants International-presentation

    Kizuku KUSHIMOTO, Atsuko Shimosaka, Yoshiyuki Shirakawa, Jusuke Hidaka, Kayano Yoshisada

    2015 Adhesive and Sealant Convention Fall Conference + EXPO 2015/10/19

  134. 画像解析法による粒子分散複合材料内粒子分散性評価指標と複合材料特性の関係

    森山美果, 久志本築, 下坂厚子, 村上延慶, 筬部周浩, 萱野義貞, 田近正彦, 日高重助

    第53回粉体に関する討論会 2015/09/28

  135. Measurement of the dispersion state of particle fillers in composite materials by dielectric constant International-presentation

    Kizuku KUSHIMOTO, Atsuko Shimosaka, Yoshiyuki Shirakawa, Jusuke Hidaka

    13th Mediterranean Congress of Chemical Engineering 2014/09/30

  136. 誘電率による微粒子コンポジット材料内フィラー分散状態の計測

    久志本築, 下坂厚子, 白川善幸, 日高重助

    化学工学会 第79年会 2014/03/18

Show all Show first 5

Industrial Property Rights 5

  1. DIELECTRIC CONSTANT MEASUREMENT METHOD FOR POWDER IN POWDER-DISPERSED COMPOSITE MATERIAL

    Jusuke HIDAKA, Kizuku KUSHIMOTO

    10422763

    Property Type: Patent

  2. METHOD FOR CALCULATING DIELECTRIC CONSTATN OF PARTILCE-DISPERSED COMPOSITE MATERIALS AND METHOD FOR EVALUATING DISPERSIBILITY

    Jusuke HIDAKA, Kizuku KUSHIMOTO

    20180292343

    Property Type: Patent

  3. 粒子分散複合材料の誘電率算出方法及び分散性評価方法

    日高重助, 久志本築

    特許6178946

    Property Type: Patent

  4. 着目粒子の混合度を決定する方法、プログラム、情報処理装置及び混合機

    久志本 築, 加納 純也

    Property Type: Patent

  5. 計算方法、計算装置、プログラム、計算モデル

    久志本 築, 加納純也

    Property Type: Patent

Research Projects 10

  1. Development of a new simulation method analyzing the grinding behavior under wet ball milling

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research

    Category: Grant-in-Aid for Early-Career Scientists

    Institution: Tohoku University

    2022/04/01 - 2025/03/31

  2. 廃プラスチックを原料とする新奇水素生成プロセスの創成とそのメカニズム解明

    加納 純也, 村松 淳司, 石原 真吾, 久志本 築

    Offer Organization: 日本学術振興会

    System: 科学研究費助成事業

    Category: 基盤研究(A)

    Institution: 東北大学

    2020/04/01 - 2025/03/31

    More details Close

    廃プラスチックに水酸化カルシウムと水酸化ニッケルを混合し、その混合物を水蒸気雰囲気下で加熱することにより、水素生成できることを見いだした。しかしながら、その反応メカニズムは明確になっていないため、まず、その反応メカニズムを明確にすること、水酸化カルシウムや水酸化ニッケルの代替となる廃棄物を探索し、水素原料がすべて廃棄物である世界に類をみない画期的な水素製造プロセスシステムの創成を目的としている。 令和3年度では、種類の異なるプラスチックの混合物を原料とした場合と廃プラスチックを原料とした場合の水素生成挙動について検討した。ポリエチレン(PE)とポリプロピレン(PP)を用いた場合には、それぞれ、プラスチック1kgあたり約220gの水素が生成する。それらを1:1で混合して水素を生成したところ、同程度の水素が生成した。PE:PP:PS(ポリスチレン)とPE:PP:PVC(ポリ塩化ビニル)をそれぞれ、1:1:1で混合し、水素生成すると、それぞれ、約60g、約40gとなった。PSとPVCは水素生成反応を阻害することが分かった。 廃プラスチックとしてビニール袋(PE)とペットボトルのキャップ(PP)を原料として使用した。それぞれ、試薬と同程度の水素が生成することを確認し、廃プラスチックから水素生成することに初めて成功した。マヨネーズ、シール、土が付着した汚れたプラスチックを用いて水素生成実験を行ったところ、シールは、水素生成量にほとんど影響を及ぼさなかった。マヨネーズは、水素生成量を増加させる方向に、土は減少させる方向に影響を及ぼすことが分かった。

  3. 混錬プロセスにおける粒子の濡れ・分散挙動解析 手法の開発

    2022/04 - 2024/06

  4. Control of microstructure in particulate composite materials

    2022/05 - 2023/03

  5. ボールミル内粒子の固着発生機構の解明

    Kizuku Kushimoto

    Offer Organization: 公益財団法人 ホソカワ粉体工学振興財団

    System: 令和3年度助成事業 研究助成

    Category: 研究助成

    Institution: 東北大学 多元物質科学研究所

    2022/04 - 2023/03

  6. Elucidation of mechanism and development of control method for re-aggregation phenomenon during wet ball milling of ceramics particles

    Kushimoto Kizuku

    Offer Organization: Japan Society for the Promotion of Science

    System: Grants-in-Aid for Scientific Research

    Category: Grant-in-Aid for Research Activity Start-up

    Institution: Tohoku University

    2020/09/11 - 2022/03/31

    More details Close

    We elucidated the mechanism for the re-aggregation phenomenon observed during wet ball milling of ceramics particles and developed the control method for the phenomenon. The re-aggregation phenomenon has difficulty in being analyzed by experiments because the phenomenon is observed during wet ball milling and occurs in the scale of particles. Thus, first of all, the simulation method for analyzing the re-aggregation phenomenon was developed. From using the simulation, we analyzed the re-aggregation mechanism and found that the re-aggregation being collected in stagnated fluid flow that occurred when the grinding balls were approaching and separating each other. Furthermore, it was suggested that the re-aggregation could be suppressed by increasing the relative velocity of the grinding balls when approaching and separating each other in order to decrease the stagnation area of the fluid flow.

  7. 微粒子複合材料における微粒子混練工程での微粒子分散メカニズムの解析 Competitive

    久志本築

    Offer Organization: ホソカワ粉体工学振興財団

    System: 平成28年度若手研究者育成のための助成

    2017/03 - 2018/03

  8. 独立行政法人日本学生支援機構(JASSO)海外留学支援制度(協定派遣) (給付型奨学金,Cooperative Laboratory Study Program(COLABS Program)の一貫として)

    久志本築

    Offer Organization: 独立行政法人日本学生支援機構(JASSO)

    2017/09 -

  9. 誘電率による微粒子複合材料内粒子分散状態の計測 Competitive

    久志本築

    Offer Organization: ホソカワ粉体工学振興財団

    System: 平成27年度若手研究者育成のための助成

    2016/03 - 2017/03

  10. 同志社大学寄付奨学金(給付)

    久志本築

    2015/06 -

Show all Show first 5

Other 2

  1. 独立行政法人日本学生支援機構(JASSO)海外留学支援制度(協定派遣) (給付型奨学金,Cooperative Laboratory Study Program(COLABS Program)の一貫として) 採択

  2. 同志社大学寄付奨学金(給付)