研究者詳細

顔写真

サカンタナソン　ナルテプ
Sukulthanasorn Naruethep
Sukulthanasorn Naruethep
所属
災害科学国際研究所　災害評価・低減研究部門　計算安全工学研究分野
職名
助教
学位

  • Bachelor of Engineering （Chulalongkorn University）

  • Master of Engineering （Chulalongkorn University）

  • 博士（工学） （名古屋大学）

e-Rad 研究者番号
80976233

経歴 2

  • 2026年3月 ～ 継続中
    Computational Safety Engineering Lab, Risk Evaluation and Disaster Mitigation Research Division, International Research Institute of Disaster Science, Tohoku University

  • 2022年11月 ～ 2026年3月
    Nippon Koei Resilient City with Digital Twin Technologies Joint Research Lab, International Research Institute of Disaster Science, Tohoku University　Assistant professor

学歴 2

  • 名古屋大学

    ～ 2022年10月

  • Chulalongkorn University

    ～ 2018年8月

所属学協会 2

  • The Japan Society for Computational Engineering and Science

    2023年4月 ～ 継続中

  • The International Association of Computational Mechanics (IACM)

    2023年4月 ～

研究キーワード 6

  • Computational Disaster Mitigation

  • 量子コンピューティング

  • Computational mechanics

  • Structural optimization

  • Fracture mechanics

  • Topology optimization

受賞 1

  1. Best Student Paper Award

    2022年5月　The Asian Society of Structural and Multidisciplinary Optimization (ASSMO)

論文 13

  1. Hierarchical topology optimization for transient heat conduction in porous media with microstructure-dependent property

    Naruethep Sukulthanasorn, Mao Kurumatani, Jaroon Rungamornrat, Kenjiro Terada, Junji Kato

    International Journal of Heat and Mass Transfer　2026年5月

    DOI： 10.1016/j.ijheatmasstransfer.2026.128366 　

  2. Quantum neural network-assisted topology optimization: Concept and implementation with parameterized quantum circuits 査読有り

    Naruethep Sukulthanasorn, Kenjiro Terada

    Computer Methods in Applied Mechanics and Engineering　2026年1月

    DOI： 10.1016/j.cma.2025.118411 　

  3. A novel design update framework for topology optimization with quantum annealing: Application to truss and continuum structures 査読有り

    Naruethep Sukulthanasorn, Junsen Xiao, Koya Wagatsuma, Reika Nomura, Shuji Moriguchi, Kenjiro Terada

    Computer Methods in Applied Mechanics and Engineering　437　117746-117746　2025年3月

    出版者・発行元： Elsevier BV

    DOI： 10.1016/j.cma.2025.117746 　

    ISSN：0045-7825

  4. Two-scale topology optimization for transient heat analysis in porous material considering the size effect of microstructure 査読有り

    Naruethep Sukulthanasorn, Hiroya Hoshiba, Koji Nishiguchi, Mao Kurumatani, Robert Fleischhauer, Kuniharu Ushijima, Michael Kaliske, Kenjiro Terada, Junji Kato

    Structural and Multidisciplinary Optimization　65　(7)　2022年7月

    DOI： 10.1007/s00158-022-03257-2 　

    ISSN：1615-147X

    eISSN：1615-1488

  5. A robust and efficient framework for analysis of arbitrarily shaped cracks in 3D quasicrystal media

    Hoang-Tien Pham, Anh Khac Le Vo, Naruethep Sukulthanasorn, Thai-Binh Nguyen, Jing Hu, Elena Atroshchenko, Jaroon Rungamornrat

    Engineering Fracture Mechanics　2026年4月

    DOI： 10.1016/j.engfracmech.2026.111872 　

  6. Initial observations and immediate lessons learned from Thailand's response to the 2025 Mandalay earthquake 査読有り

    Ampan Laosunthara, Kodchakorn Krutphong, Natt Leelawat, Wongsa Wararuksajja, Naruethep Sukulthanasorn, Anawat Suppasri, Ratchaneekorn Thongthip, Chatpan Chintanapakdee

    International Journal of Disaster Risk Reduction　127　105675-105675　2025年9月

    出版者・発行元： Elsevier BV

    DOI： 10.1016/j.ijdrr.2025.105675 　

    ISSN：2212-4209

  7. An efficient Quantum Approximate Optimization Algorithm with fixed linear ramp schedule for truss structure optimization 査読有り

    Junsen Xiao, Naruethep Sukulthanasorn, Reika Nomura, Shuji Moriguchi, Kenjiro Terada

    Advanced Modeling and Simulation in Engineering Sciences　12　(1)　2025年6月18日

    出版者・発行元： Springer Science and Business Media LLC

    DOI： 10.1186/s40323-025-00298-2 　

    eISSN：2213-7467

    詳細を見る 詳細を閉じる

    Abstract This study proposes a novel structural optimization framework based on quantum variational circuits, in which the multiplier acting on the cross-sectional area of each rod in a truss structure as an updater is used as a design variable. Specifically, we employ a classical processor for structural analysis with the finite element method, and the Quantum Approximate Optimization Algorithm (QAOA) is subsequently performed to update the cross-sectional area so that the compliance is minimized. The advantages of this framework can be seen in three key aspects. First, by defining design variables as multipliers, rather than simply reducing the design variable to a binary candidate of inclusion or exclusion (corresponding to qubit states, “0” and “1”), it provides greater flexibility in adjusting the cross-sectional area of the rod at each iteration of the optimization process. Second, the multipliers acting on rods are encoded with on-off encoding, eliminating additional constraints in the convergence judgement. As a result, the objective function is in a simple format, enabling efficient optimization using QAOA. Third, a fixed linear ramp schedule (FLRS) for variational parameter setting bypasses the classical optimization process, thereby improving the operational efficiency of the framework. In the two structural cases investigated in this study, the proposed approach highlights the feasibility and applicability potential of quantum computing in advancing engineering design and optimization. Numerical experiments have demonstrated the effectiveness of this framework, providing a firm foundation for future research on quantum-assisted optimization methods in engineering fields.

  8. Electro-thermal vibration of graphene platelets reinforced functionally graded piezoelectric microplates under different boundary conditions 査読有り

    Van-Loi Nguyen, Naruethep Sukulthanasorn, Watanachai Smittakorn, Jaroon Rungamornrat

    International Journal of Solids and Structures　113273-113273　2025年2月

    出版者・発行元： Elsevier BV

    DOI： 10.1016/j.ijsolstr.2025.113273 　

    ISSN：0020-7683

  9. Quantum annealing-based structural optimization with a multiplicative design update.

    Naruethep Sukulthanasorn, Junsen Xiao, Koya Wagatsuma, Shuji Moriguchi, Kenjiro Terada

    CoRR　abs/2406.18833　2024年

    DOI： 10.48550/arXiv.2406.18833 　

  10. Analysis of near-interface cracks in three-dimensional anisotropic multi-materials by efficient BIEM 査読有り

    Watanavit, P., Sukulthanasorn, N., Atroshchenko, E., Nguyen-Xuan, H., Rungamornrat, J.

    Theoretical and Applied Fracture Mechanics　126　2023年5月

    DOI： 10.1016/j.tafmec.2023.103939 　

    ISSN：0167-8442

  11. Weakly singular BIE-based procedure for T-stress analysis of cracks in 3D anisotropic linear elastic finite media 査読有り

    Naruethep Sukulthanasorn, Pisit Watanavit, Duy Vo, Tosporn Prasertsri, Mark E. Mear, Jaroon Rungamornrat

    International Journal of Fracture　239　(2)　167-188　2023年2月

    DOI： 10.1007/s10704-022-00667-7 　

    ISSN：0376-9429

    eISSN：1573-2673

  12. Transient thermal porous structure designed by two-scale concurrent topology optimization 査読有り

    Naruethep Sukulthanasorn, Mao Kurumatani, Koji Nishiguchi, Junji Kato, Kenjiro Terada

    Transactions of the Japan Society for Computational Engineering and Science　2022　2022年

    DOI： 10.11421/jsces.2022.20220004 　

    eISSN：1347-8826

  13. Analysis for T-stress of cracks in 3D anisotropic elastic media by weakly singular integral equation method 査読有り

    Jaroon Rungamornrat, Naruethep Sukulthanasorn, Mark E. Mear

    Computer Methods in Applied Mechanics and Engineering　347　1004-1029　2019年4月

    DOI： 10.1016/j.cma.2019.01.007 　

    ISSN：0045-7825

︎全件表示 ︎最初の5件までを表示

MISC 5

  1. Sequential Updating of Building Fragility Functions through City-Scale Seismic Simulations and Sensor Integration

    Dongyang Tang, Naruethep Sukulthanasorn, ReikaNomura, Kazuya Nojima, Atsushi Mori, Susumu Ohno, Jia Guo, Seiichi Sato, Shuji Moriguchi, Masaaki Sakuraba, Kenjiro Terada

    Proceedings of the Conference on Computational Engineering and Science　30　735-740　2025年6月

  2. Applicability of Gaussian On-off Encoding for Quantum Annealing to Structural Analysis

    Junsen Xiao, Naruethep Sukulthanasorn, Endo Katsuhiro, Mayu Muramatsu, Reika Nomura, Shuji Moriguchi, Kenjiro Terada

    Proceedings of the Conference on Computational Engineering and Science　30　592-596　2025年6月

  3. Quantum-assisted design update framework for topology optimization : Comparison of quantum, simulated, and hybrid annealers

    Naruethep Sukulthanasorn, Junsen Xiao, Koya Wagatsuma, Reika Nomura, Shuji Moriguchi, Kenjiro Terada

    Proceedings of the Conference on Computational Engineering and Science　30　581-586　2025年6月

  4. QAにおけるGaussian on-offエンコーディングの構造解析に対する適用性に関する検討

    XIAO Junsen, SUKULTHANASORN Naruethep, 遠藤克浩, 村松眞由, 野村怜佳, 森口周二, 寺田賢二郎

    日本機械学会計算力学講演会論文集(CD-ROM)　37th　2024年

    ISSN： 2424-2799

  5. Seismic Risk Assessment with Fragility Function using the City-scale Numerical Simulation

    Dongyang Tang, Naruethep Sukulthanasorn, Reika Nomura, Kazuya Nojima, Atsushi Mori, Susumu Ohno, Jia Guo, Seiichi Sato, Shuji Moriguchi, Masaaki Sakuraba, Kenjiro Terada

    Proceedings of the Conference on Computational Engineering and Science　28　1-5　2023年5月

講演・口頭発表等 7

  1. ON THE INTEGRATION OF QUANTUM NEURAL NETWORKS INTO TOPOLOGY OPTIMIZATION

    Naruethep Sukulthanasorn

    Applied Quantum Methods in Computational Science and Engineering – AQMCSE 2025

  2. On the application of quantum neural networks to topology optimization

    Naruethep Sukulthanasorn

    18th U.S. National Congress on Computational Mechanics (USNCCM18)

  3. On the Performance of a Quantum Annealing-Assisted Framework for Topology Optimization in Truss and Continuum Structures

    Naruethep Sukulthanasorn

    16th World Congress on Structural and Multidisciplinary Optimization

  4. Quantum annealing for structural design

    NARUETHEP SUKULTHANASORN

    16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics (WCCM-PANACM)

  5. Topology Optimization using Quantum Annealing-based Optimizer

    NARUETHEP SUKULTHANASORN

    Asian Congress of Structural and Multidisciplinary Optimization 2024 (ACSMO2024)

  6. Two-scale topology optimization for transient heat transfer considering size effect of microstructure in porous material

    NARUETHEP SUKULTHANASORN

    14th World Congress of Structural and Multidisciplinary Optimization (WCSMO14)

  7. Multi-scale topology optimization for transient heat transportation in porous material

    NARUETHEP SUKULTHANASORN

    14th World Congress on Computational Mechanics & 8th European Congress on Computational Method in Applied Sciences and Engineering

︎全件表示 ︎最初の5件までを表示

共同研究・競争的資金等の研究課題 1

  1. Quantum Hamiltonian Descent による トラス構造最適化

    Naruethep Sukulthanasorn, 寺田 賢二郎, 野村 怜佳, 我妻 航也, 飯塚 聡, 石橋 知士

    提供機関：Ensemble Project for Early Career Researchers, Tohoku University

    研究機関：Tohoku University

    2025年12月 ～ 2026年3月