-
博士(工学) (東華大学)
研究者詳細
経歴 5
-
2025年5月 ~ 継続中東北大学 大学院工学研究科 材料システム工学専攻 (特任)助教
-
2022年10月 ~ 2025年5月東北大学 大学院工学研究科 材料システム工学専攻 特任研究員
-
2021年4月 ~ 2022年9月東北大学 大学院工学研究科 材料システム工学専攻 特任助教
-
2019年9月 ~ 2021年3月東北大学 大学院工学研究科 材料システム工学専攻 ポスドク
-
2017年11月 ~ 2019年8月東北大学 大学院工学研究科 材料システム工学専攻 学術研究員
学歴 1
-
東華大学 材料学部 材料学専攻 博士課程
2013年9月 ~ 2019年7月
所属学協会 2
-
日本金属学会
2020年5月 ~ 継続中
-
粉体粉末冶金協会
2018年6月 ~ 継続中
研究キーワード 5
-
構造・機能材料
-
粉末冶金
-
レーザー 3次元積層造形
-
複合材料
-
熱電材料
研究分野 4
-
ナノテク・材料 / ナノマイクロシステム /
-
ナノテク・材料 / ナノ材料科学 /
-
ナノテク・材料 / 複合材料、界面 /
-
ナノテク・材料 / 材料加工、組織制御 /
論文 47
-
Powder-engineered high-strength, high-conductivity MXene/Al matrix composites
Weiwei Zhou, Zhenxing Zhou, Li-Fu Yi, Mingqi Dong, Zhong-Chun Chen, Naoyuki Nomura
Journal of Alloys and Compounds 1074 189079-189079 2026年6月
出版者・発行元: Elsevier BVDOI: 10.1016/j.jallcom.2026.189079
ISSN:0925-8388
-
Laser additive manufacturing of novel Al-matrix composites reinforced with high-volume multiscale in-situ Al4C3
Li-Fu Yi, Weiwei Zhou, Kakeru Yabe, Zhenxing Zhou, Taiki Komori, Peter Benard Oboso, Naoyuki Nomura, Zhong-Chun Chen
Materials Science and Engineering: A 962 150221-150221 2026年6月
出版者・発行元: Elsevier BVDOI: 10.1016/j.msea.2026.150221
ISSN:0921-5093
-
In-situ Oxide Film Formation and Enhanced Corrosion Resistance in L-PBF Fabricated 316L Stainless Steel Using SiO<sub>2</sub>-Modified Powders
Shodai TAGUCHI, Zhenxing ZHOU, Mingqi DONG, Pan LIU, Xiangyu ZHONG, Tetsuo SHOJI, Weiwei ZHOU, Naoyuki NOMURA
Journal of the Japan Society of Powder and Powder Metallurgy 73 (4) 109-120 2026年4月15日
出版者・発行元: Japan Society of Powder and Powder MetallurgyISSN:0532-8799
eISSN:1880-9014
-
Mechanical property evaluation of 316 L micro-powders via particle compression tests and finite element method simulation
Tao Zhang, Shoma Sekita, Weiwei Zhou, Zhenxing Zhou, Mingqi Dong, Naoyuki Nomura
MATERIALIA 45 2026年3月
DOI: 10.1016/j.mtla.2026.102660
ISSN:2589-1529
-
Research on Gas Emission Characteristics During Dynamic Coal Breaking in Boreholes Based on Bidisperse Diffusion Model and Coal Dust Desorption Calculation Model: Under Different Original Gas Pressures and Overburden Loads
Zhenxing Zhou, Gongda Wang, Haiyan Wang, Huiyong Niu, Yikang Liu, Xiaolu Liu
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS 2026年2月5日
DOI: 10.1002/nag.70266
ISSN:0363-9061
eISSN:1096-9853
-
Size-dependent tribological performance of graphene-reinforced Al matrix composites
Weiwei Zhou, Zhenxing Zhou, Li-Fu Yi, Mingqi Dong, Zhong-Chun Chen, Naoyuki Nomura
SMART MATERIALS IN MANUFACTURING 4 2026年
DOI: 10.1016/j.smmf.2025.100115
eISSN:2772-8102
-
Fabrication and Functionalization of Low-Dimensional Nanofillers-Reinforced Silver-Reinforced Matrix Composites
Weiwei Zhou, Zhenxing Zhou, Yunsong Xu, Mingqi Dong, Naoyuki Nomura
Materia Japan 64 (10) 645-650 2025年10月1日
出版者・発行元: Japan Institute of MetalsISSN:1340-2625
eISSN:1884-5843
-
Enhanced interfacial strength in carbon-nanotubes-reinforced Al matrix composites via an interface substitution strategy
Weiwei Zhou, Zhenxing Zhou, Mingqi Dong, Yuchi Fan, Keiichi Shirasu, Go Yamamoto, Naoyuki Nomura
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 195 2025年8月
DOI: 10.1016/j.compositesa.2025.108955
ISSN:1359-835X
eISSN:1878-5840
-
Ti addition-induced simultaneous enhancement of powder properties, melting behavior, and tensile response of pure Al for laser powder bed fusion
Weiwei Zhou, Zhenxing Zhou, Tao Zhang, Takamune Miura, Fei Sun, Naoyuki Nomura
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 938 2025年8月
DOI: 10.1016/j.msea.2025.148458
ISSN:0921-5093
eISSN:1873-4936
-
Severe plastic deformation promoted simultaneous enhancement in strength and ductility of multilayer MXene/Ag matrix composites
Yunsong Xu, Weiwei Zhou, Li-Fu Yi, Itsuki Kubo, Zhenxing Zhou, Zhong-Chun Chen, Naoyuki Nomura
Scripta Materialia 261 116612-116612 2025年5月
出版者・発行元: Elsevier BVDOI: 10.1016/j.scriptamat.2025.116612
ISSN:1359-6462
-
Influences of Different Additives on Laser-Based Additive Manufacturing of Pure Aluminum
Zhenxing Zhou, Weiwei Zhou, Naoyuki Nomura
Journal of the Japan Society of Powder and Powder Metallurgy 72 (Supplement) S1087-S1092 2025年3月15日
出版者・発行元: Japan Society of Powder and Powder MetallurgyISSN:0532-8799
eISSN:1880-9014
-
Creation of heavily La-doped SrTiO3 thermoelectric films achieved by freeze-dry pulsated orifice ejection method and laser powder bed fusion
Myeonggyun Kang, Zhenxing Zhou, Weiwei Zhou, Naoyuki Nomura
SMART MATERIALS IN MANUFACTURING 3 2025年
DOI: 10.1016/j.smmf.2025.100077
eISSN:2772-8102
-
Microstructure evolution and enhanced mechanical performance of multilayer MXene-reinforced silver matrix composites
Itsuki Kubo, Weiwei Zhou, Yunsong Xu, Zhenxing Zhou, Naoyuki Nomura
Journal of Alloys and Compounds 1007 176324-176324 2024年12月
出版者・発行元: Elsevier BVDOI: 10.1016/j.jallcom.2024.176324
ISSN:0925-8388
-
Laser additive manufacturing of a carbon-supersaturated β-Ti alloy for biomaterial application
Mingqi Dong, Yu Zhang, Weiwei Zhou, Peng Chen, Zhenxing Zhou, Hiroyasu Kanetaka, Takuya Ishimoto, Yuichiro Koizumi, Takayoshi Nakano, Naoyuki Nomura
Additive Manufacturing Letters 11 2024年12月
DOI: 10.1016/j.addlet.2024.100233
eISSN:2772-3690
-
Effects of Plasma Spheroidization Treatment on the Characteristics of MoSiBTiC Powders Fabricated by Freeze-Dry Pulsated Orifice Ejection Method
Zhenxing Zhou, Shunpei Kato, Weiwei Zhou, Naoyuki Nomura
Journal of the Japan Institute of Metals and Materials 88 (9) 210-215 2024年9月1日
出版者・発行元: Japan Institute of MetalsDOI: 10.2320/jinstmet.ja202413
ISSN:0021-4876
eISSN:1880-6880 2433-7501
-
Microstructure evolution of FD-POEM powders during high-temperature plasma spheroidization
Zhenxing Zhou, Shunpei Kato, Weiwei Zhou, Naoyuki Nomura
Advanced Powder Technology 35 (1) 104297-104297 2024年1月
出版者・発行元: Elsevier BVDOI: 10.1016/j.apt.2023.104297
ISSN:0921-8831
-
Effects of powder surface conditions on the rheological behavior of Ti–6Al–4 V alloy powders for additive manufacturing
Naoki Kakegawa, Shion Nanaumi, Zhenxing Zhou, Weiwei Zhou, Naoyuki Nomura
Powder Technology 430 119019-119019 2023年12月
出版者・発行元: Elsevier BVDOI: 10.1016/j.powtec.2023.119019
ISSN:0032-5910
-
Improvement of powder fabrication for additive manufacturing using ultrafine bubbles
Suxia Guo, Zhenxing Zhou, Mingqi Dong, Weiwei Zhou, Naoyuki Nomura
Additive Manufacturing Letters 7 100181-100181 2023年12月
出版者・発行元: Elsevier BVDOI: 10.1016/j.addlet.2023.100181
ISSN:2772-3690
-
Effects of Plasma Spheroidization Treatment on the Characteristics of MoSiBTiC Powders Fabricated by Freeze-Dry Pulsated Orifice Ejection Method
Zhenxing Zhou, Shunpei Kato, Weiwei Zhou, Naoyuki Nomura
MATERIALS TRANSACTIONS 64 (6) 1119-1124 2023年6月1日
出版者・発行元: Japan Institute of MetalsDOI: 10.2320/matertrans.mt-me2022008
ISSN:1345-9678
eISSN:1347-5320
-
Powder Fabrication and Laser Powder Bed Fusion of a MoSiBTiC-La2O3 Alloy
Chenguang Li, Suxia Guo, Zhenxing Zhou, Weiwei Zhou, Naoyuki Nomura
Crystals 13 (2) 215-215 2023年1月24日
出版者・発行元: MDPI AGeISSN:2073-4352
-
Microstructures and Mechanical Properties of Carbon-Added Ti Composites Fabricated by Laser Powder Bed Fusion or Spark Plasma Sintering
Mingqi Dong, Weiwei Zhou, Zhenxing Zhou, Naoyuki Nomura
MATERIALS TRANSACTIONS 64 (1) 54-60 2023年1月1日
出版者・発行元: Japan Institute of MetalsDOI: 10.2320/matertrans.mt-mla2022008
ISSN:1345-9678
eISSN:1347-5320
-
Simultaneous enhancement of powder properties, additive manufacturability, and mechanical performance of Ti–6Al–4V alloy by 2D-nanocarbon decoration
Mingqi Dong, Weiwei Zhou, Zhenxing Zhou, Naoyuki Nomura
Materials Science and Engineering A 859 2022年11月24日
DOI: 10.1016/j.msea.2022.144215
ISSN:0921-5093
-
Laser powder bed fusion of MoSiBTiC alloy powders produced by freeze-dry pulsated orifice ejection method
Zhenxing Zhou, Suxia Guo, Shunpei Kato, Weiwei Zhou, Naoyuki Nomura
JOURNAL OF ALLOYS AND COMPOUNDS 921 2022年11月
DOI: 10.1016/j.jallcom.2022.165997
ISSN:0925-8388
eISSN:1873-4669
-
Elucidating the impact of severe oxidation on the powder properties and laser melting behaviors
Weiwei Zhou, Nina Takase, Mingqi Dong, Naoki Watanabe, Suxia Guo, Zhenxing Zhou, Naoyuki Nomura
Materials and Design 221 2022年9月
DOI: 10.1016/j.matdes.2022.110959
ISSN:0264-1275
eISSN:1873-4197
-
Structural evolution mechanism during 3D printing of MXene-reinforced metal matrix composites
Weiwei Zhou, Zhenxing Zhou, Suxia Guo, Yuchi Fan, Naoyuki Nomura
Composites Communications 29 2022年1月
DOI: 10.1016/j.coco.2021.101034
ISSN:2452-2139
-
Laser additive manufacturing of pure molybdenum using freeze-dry pulsated orifice ejection method-produced powders
Suxia Guo, Weiwei Zhou, Zhenxing Zhou, Naoyuki Nomura
Journal of Materials Research and Technology 16 1508-1516 2022年1月1日
DOI: 10.1016/j.jmrt.2021.12.084
ISSN:2238-7854
-
レーザ粉末床溶融結合法ならびに放電プラズマ焼結法により作製した炭素添加チタン基複合材料の組織と機械的性質
董 明琪, 周 偉偉, 周 振興, 野村 直之
軽金属 72 (6) 314-320 2022年
出版者・発行元: 一般社団法人 軽金属学会DOI: 10.2464/jilm.72.314
ISSN:0451-5994
eISSN:1880-8018
-
A novel approach of fabricating monodispersed spherical MoSiBTiC particles for additive manufacturing
Zhenxing Zhou, Suxia Guo, Weiwei Zhou, Naoyuki Nomura
SCIENTIFIC REPORTS 11 (1) 2021年8月
DOI: 10.1038/s41598-021-96187-w
ISSN:2045-2322
-
In-situ reduction of mo-based composite particles during laser powder bed fusion
Suxia Guo, Weiwei Zhou, Zhenxing Zhou, Yuchi Fan, Wei Luo, Naoyuki Nomura
Crystals 11 (6) 2021年6月
eISSN:2073-4352
-
Significant strengthening effect in few-layered MXene-reinforced Al matrix composites
Weiwei Zhou, Zhenxing Zhou, Yuchi Fan, Naoyuki Nomura
Materials Research Letters 9 (3) 148-154 2021年
DOI: 10.1080/21663831.2020.1861120
eISSN:2166-3831
-
Design of high-performance Al<inf>4</inf>C<inf>3</inf>/Al matrix composites for electric conductor
Weiwei Zhou, Zhenxing Zhou, Korefumi Kubota, Hironobu Ono, Naoyuki Nomura, Akira Kawasaki
Materials Science and Engineering A 798 2020年11月4日
DOI: 10.1016/j.msea.2020.140331
ISSN:0921-5093
-
Liquid-Phase Assisted Engineering of Highly Strong SiC Composite Reinforced by Multiwalled Carbon Nanotubes
Yuchi Fan, Erhong Song, Tufail Mustafa, Ruicong Liu, Pengpeng Qiu, Weiwei Zhou, Zhenxing Zhou, Akira Kawasaki, Keiichi Shirasu, Toshiyuki Hashida, Jianjun Liu, Lianjun Wang, Wan Jiang, Wei Luo
Advanced Science 7 (21) 2020年11月1日
eISSN:2198-3844
-
Enhanced TE properties of Cu@Ag/Bi2Te3 nanocomposites by decoupling electrical and thermal properties
Xiaofang Lu, Qi Zheng, Shijia Gu, Rui Guo, Li Su, Jiancheng Wang, Zhenxing Zhou, Yuchi Fan, Wan Jiang, Lianjun Wang
CHINESE CHEMICAL LETTERS 31 (3) 880-884 2020年3月
DOI: 10.1016/j.cclet.2019.07.034
ISSN:1001-8417
eISSN:1878-5964
-
凍結乾燥POEM法を用いたMoSiBTiC複合粉末の作製とそのレーザ積層造形
加藤駿平, 周振興, 清野雄太, 周偉偉, 吉見享祐, 野村直之
日本金属学会講演大会(Web) 167th 2020年
-
Microstructure and composition engineering Yb single-filled CoSb3 for high thermoelectric and mechanical performances
Zhenxing Zhou, Matthias T. Agne, Qihao Zhang, Shun Wan, Qingfeng Song, Qing Xu, Xiaofang Lu, Shijia Gu, Yuchi Fan, Wan Jiang, Gerald Jeffrey Snyder, Lianjun Wang
JOURNAL OF MATERIOMICS 5 (4) 702-710 2019年12月
DOI: 10.1016/j.jmat.2019.04.008
ISSN:2352-8478
-
Effect of Spark Plasma Sintering on Sintering Process of Filled Skutterudites Thermoelectric Properties
Zhenxing Zhou, Xiaofang Lu, Lianjun Wang, Shijia Gu
Materials China 38 (6) 588-593 2019年6月1日
DOI: 10.7502/j.issn.1674-3962.201706007
ISSN:1674-3962
-
Structurally nanocrystalline electrically monocrystalline Sb2Te3 with high thermoelectric performance
Xiaofang Lu, Ping Lu, Yuchi Fan, Weiwei Zhou, Shijia Gu, Zhenxing Zhou, Jie Zhang, Li Su, Lianjun Wang, Wan Jiang
SCRIPTA MATERIALIA 166 81-86 2019年6月
DOI: 10.1016/j.scriptamat.2019.03.013
ISSN:1359-6462
-
The effect of reduced graphene oxide on microstructure and thermoelectric properties of Nb-doped A-site-deficient SrTiO3 ceramics
Cao Wu, Jia Li, Yuchi Fan, Juanjuan Xing, Hui Gu, Zhenxing Zhou, Xiaofang Lu, Qihao Zhang, Lianjun Wang, Wan Jiang
JOURNAL OF ALLOYS AND COMPOUNDS 786 884-893 2019年5月
DOI: 10.1016/j.jallcom.2019.01.376
ISSN:0925-8388
eISSN:1873-4669
-
Uniform dispersion of SiC in Yb-filled skutterudite nanocomposites with high thermoelectric and mechanical performance
Zhenxing Zhou, Jianlin Li, Yuchi Fan, Qihao Zhang, Xiaofang Lu, Shengjie Fan, Keiko Kikuchi, Naoyuki Nomura, Akira Kawasaki, Lianjun Wang, Wan Jiang
SCRIPTA MATERIALIA 162 166-171 2019年3月
DOI: 10.1016/j.scriptamat.2018.11.015
ISSN:1359-6462
-
Preparation and Thermoelectric Properties of Ag/Yb<inf>0.35</inf>Co<inf>4</inf>Sb<inf>12</inf> Thermoelectric Composites
Zhen Xing Zhou, Peng Chen, Sheng Jie Fan, Xiao Fang Lu, Shi Jia Gu, Lian Jun Wang
Rengong Jingti Xuebao/Journal of Synthetic Crystals 48 (2) 2019年2月1日
ISSN:1000-985X
-
Electrically Conductive and Mechanically Strong Graphene/Mullite Ceramic Composites for High-Performance Electromagnetic Interference Shielding
Jianhong Ru, Yuchi Fan, Weiwei Zhou, Zhenxing Zhou, Tuo Wang, Ruiheng Liu, Jianping Yang, Xiaofang Lu, Jiancheng Wang, Chengchang Ji, Lianjun Wang, Wan Jiang
ACS Applied Materials and Interfaces 10 (45) 39245-39256 2018年11月14日
ISSN:1944-8244
eISSN:1944-8252
-
Enhanced thermoelectric and mechanical properties of Na-doped polycrystalline SnSe thermoelectric materials via CNTs dispersion
Fei Chu, Qihao Zhang, Zhenxing Zhou, Diankun Hou, Lianjun Wang, Wan Jiang
JOURNAL OF ALLOYS AND COMPOUNDS 741 756-764 2018年4月
DOI: 10.1016/j.jallcom.2018.01.178
ISSN:0925-8388
eISSN:1873-4669
-
Enhancing the thermoelectric performance of filled skutterudite nanocomposites in a wide temperature range via electroless silver plating
Peng Chen, Zhenxing Zhou, Wan Jiang, Wei Luo, Jianping Yang, Juanjuan Zhu, Lianjun Wang, Yuchi Fan
SCRIPTA MATERIALIA 146 136-141 2018年3月
DOI: 10.1016/j.scriptamat.2017.11.019
ISSN:1359-6462
-
Realizing high-performance thermoelectric power generation through grain boundary engineering of skutterudite-based nanocomposites
Qihao Zhang, Zhenxing Zhou, Maxwell Dylla, Matthias T. Agne, Yanzhong Pei, Lianjun Wang, Yunshan Tang, Jincheng Liao, Juan Li, Shengqiang Bai, Wan Jiang, Lidong Chen, Gerald Jeffrey Snyder
NANO ENERGY 41 501-510 2017年11月
DOI: 10.1016/j.nanoen.2017.10.003
ISSN:2211-2855
eISSN:2211-3282
-
Constructing nanoporous carbon nanotubes/Bi2Te3 composite for synchronous regulation of the electrical and thermal performances
Qihao Zhang, Leilei Xu, Zhenxing Zhou, Lianjun Wang, Wan Jiang, Lidong Chen
JOURNAL OF APPLIED PHYSICS 121 (5) 2017年2月
DOI: 10.1063/1.4975467
ISSN:0021-8979
eISSN:1089-7550
-
Enhanced thermoelectric properties in p-type Bi0.4Sb1.6Te3 alloy by combining incorporation and doping using multi-scale CuAlO2 particles
Zijun Song, Qihao Zhang, Yuan Liu, Zhenxing Zhou, Xiaofang Lu, Lianjun Wang, Wan Jiang, Lidong Chen
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE 214 (1) 2017年1月
ISSN:1862-6300
eISSN:1862-6319
-
Preparation of bulk AgNWs/PEDOT:PSS composites: a new model towards high-performance bulk organic thermoelectric materials
Yuan Liu, Zijun Song, Qihao Zhang, Zhenxing Zhou, Yijing Tang, Lianjun Wang, Juanjuan Zhu, Wei Luo, Wan Jiang
RSC ADVANCES 5 (56) 45106-45112 2015年
DOI: 10.1039/c5ra05551b
eISSN:2046-2069
MISC 2
-
レーザ粉末床溶融結合法ならびに放電プラズマ焼結法により作製した炭素添加チタン基複合材料の組織と機械的性質—Microstructures and mechanical properties of carbon-added Ti composites fabricated by laser powder bed fusion or spark plasma sintering—特集 軽金属材料の三次元造形技術
董 明琪, 周 偉偉, 周 振興, 野村 直之
軽金属 72 (6) 314-320 2022年6月
ISSN: 0451-5994
-
超高温耐熱材料MoSiBTiC合金のレーザ三次元積層造形への試み—Challenges for the Fabrication of Heat-resistant MoSiBTiC Alloy Using Laser Powder Bed Fusion for Ultrahigh Temperature Applications—特集 レーザーテクノロジーとセラミックス
野村 直之, 周 偉偉, 周 振興, 吉見 享祐
Ceramics Japan = セラミックス : bulletin of the Ceramic Society of Japan 55 (2) 90-92 2020年2月
出版者・発行元: 日本セラミックス協会ISSN: 0009-031X
共同研究・競争的資金等の研究課題 2
-
積層欠陥を導入して導電性と強度を両立する軽元素過飽和固溶Al基合金の創製
周 振興, 周 偉偉, 野村 直之
提供機関:Japan Society for the Promotion of Science
制度名:Grants-in-Aid for Scientific Research
研究種目:Grant-in-Aid for Scientific Research (C)
研究機関:Tohoku University
2025年4月1日 ~ 2028年3月31日
-
新奇球状複合粉末調製技術とレーザ粉末積層造形を活用した過飽和固溶熱電材料の創製
周 振興
提供機関:Japan Society for the Promotion of Science
制度名:Grants-in-Aid for Scientific Research
研究種目:Grant-in-Aid for Early-Career Scientists
研究機関:Tohoku University
2023年4月1日 ~ 2025年3月31日