Improvement of the deposition efficiency and adhesion strength of cold sprayed fluoropolymer coating by laser surface texturing of the substrate Peer-reviewed

Wesley Lock Sulen, Chrystelle Bernard, Shinya Onodera, Junichi Ishizaki, Nicolas Mary, Yuji Ichikawa, Kazuhiro Ogawa

Surface and Coatings Technology　478　130489-130489　2024/02

DOI： 10.1016/j.surfcoat.2024.130489 　

ISSN： 0257-8972

Optimal Design of a Cold Spray Nozzle for Inner Wall Coating Fabrication by Combining CFD Simulation and Neural Networks Peer-reviewed

Yuxian Meng, Hiroki Saito, Chrystelle Bernard, Yuji Ichikawa, Kazuhiro Ogawa

Journal of Thermal Spray Technology　2024/01/22

DOI： 10.1007/s11666-024-01716-4 　

ISSN： 1059-9630

eISSN： 1544-1016

Mechanically Robust Self-Organized Crack-Free Nanocellular Graphene with Outstanding Electrochemical Properties in Sodium Ion Battery Peer-reviewed

Wong Young Park, Jiuhui Han, Jongun Moon, Soo Hyun Joo, Takeshi Wada, Yuji Ichikawa, Kazuhiro Ogawa, Hyoung Seop Kim, Mingwei Chen, Hidemi Kato

Advanced Materials　2024

DOI： 10.1002/adma.202311792 　

ISSN： 0935-9648

eISSN： 1521-4095

Suggestion of a New Repair Technique for Steel Structures by Low-Pressure Cold Spray and Laser Cleaning Peer-reviewed

Tomonori Hatori, Hiroki Saito, Yuji Ichikawa, Kazuhiro Ogawa, Yuichi Kato, Kosaku Motomura, Michito Nakano, Norimichi Yamashita

MATERIALS TRANSACTIONS　64　(10)　2515-2522　2023/10/01

DOI： 10.2320/matertrans.mt-t2023001 　

ISSN： 1345-9678

eISSN： 1347-5320

Fatigue crack propagating behavior from inner surface crack on bent sheet of ultra-high strength steel Peer-reviewed

Naoki Yamaguchi, Yuichi Tokita, Tsuyoshi Shiozaki, Yoshikiyo Tamai, Yuji Ichikawa, Kazuhiro Ogawa

International Journal of Fatigue　107819-107819　2023/07

DOI： 10.1016/j.ijfatigue.2023.107819 　

ISSN： 0142-1123

Thermal gradient in polymeric particles during the cold spray process Peer-reviewed

C. A. Bernard, H. Takana, G. Diguet, O. Lame, K. Ogawa, J.-Y. Cavaillé

Computational Particle Mechanics　2023/04/11

DOI： 10.1007/s40571-023-00583-0 　

ISSN： 2196-4378

eISSN： 2196-4386

Evaluation of Absorbed Energy in High-Velocity Particle Impact for Aero-Engine Materials Peer-reviewed

Yuya IKUTA, Hiroki SAITO, Yuji ICHIKAWA, Kazuhiro OGAWA, Yutaro OTA, Yohei SAKAKIBARA

Journal of the Society of Materials Science, Japan　72　(2)　112-119　2023/02/15

DOI： 10.2472/jsms.72.112 　

ISSN： 0514-5163

eISSN： 1880-7488

Soft Magnetic Properties of Agglomerates of Fe Nanoparticles Fabricated by Cold-Spray Technique Peer-reviewed

Eiji Watanabe, Yuhei Kurumiya, Tomoyuki Ogawa, Hiroaki Kura, Hiroki Saito, Yuji Ichikawa, Shuya Namikawa, Hiroki Watanabe, Kazuhiro Ogawa

IEEE Transactions on Magnetics　1-1　2023

DOI： 10.1109/tmag.2023.3293394 　

ISSN： 0018-9464

eISSN： 1941-0069

Interfacial oxidation and boundary amorphization deposition mechanisms of GaN powder on metallic substrate by low-pressure cold spraying Peer-reviewed

Shaoyun Zhou, Jiayu Sun, Chrystelle Bernard, Hao Lin, Hiroki Saito, Takamichi Miyazaki, Yuji Ichikawa, Kazuhiro Ogawa

Applied Surface Science　156221-156221　2022/12

DOI： 10.1016/j.apsusc.2022.156221 　

ISSN： 0169-4332

Effect of SiC Content and Particle Size on the Self-Healing Property of Plasma-Sprayed Environmental Barrier Coatings Peer-reviewed

Kent Mitani, Hiroki Saito, Yuji Ichikawa, Kazuhiro Ogawa, Takaya Masuda, Naoki Okamoto

MATERIALS TRANSACTIONS　63　(12)　1670-1676　2022/12/01

DOI： 10.2320/matertrans.mt-t2022001 　

ISSN： 1345-9678

eISSN： 1347-5320

Fabrication of Soft Magnetic Fe-Ni Films by Direct Deposition of Nanoparticle Agglomerates Using Cold-Spray Technique Peer-reviewed

Eiji Watanabe, Hiroaki Kura, Tomoyuki Ogawa, Yuji Ichikawa, Kazuhiro Ogawa

Journal of Thermal Spray Technology　32　(1)　226-233　2022/10/26

DOI： 10.1007/s11666-022-01481-2 　

ISSN： 1059-9630

eISSN： 1544-1016

Parametric Study to Repair Leaks in Water Pipe Using the Low-Pressure Cold Spray Technique Peer-reviewed

Yuxian Meng, Hiroki Saito, Chrystelle A. Bernard, Yuji Ichikawa, Kazuhiro Ogawa

Journal of Thermal Spray Technology　31　(8)　2560-2576　2022/09/30

DOI： 10.1007/s11666-022-01469-y 　

ISSN： 1059-9630

eISSN： 1544-1016

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Hao Lin, Yangyang Liu, Wenping Liang, Qiang Miao, Shaoyun Zhou, Jiayu Sun, Yan Qi, Xiguang Gao, Yingdong Song, Kazuhiro Ogawa

Journal of the European Ceramic Society　2022/09

DOI： 10.1016/j.jeurceramsoc.2022.05.006 　

ISSN： 0955-2219

Improved Deposition Efficiency of Low-Pressure Cold-Sprayed Tin Coating Through Powder Recycling Peer-reviewed

Liliana Zarazua-Villalobos, Nicolas Mary, Chrystelle Bernard, Kazuhiro Ogawa, Clement Boissy

Journal of Thermal Spray Technology　2022/08/02

DOI： 10.1007/s11666-022-01447-4 　

ISSN： 1059-9630

eISSN： 1544-1016

Effect of cold spray deposition on fatigue strength of arc-welded ultra-high strength steel sheet Peer-reviewed

Naoki Yamaguchi, Tsuyoshi Shiozaki, Yoshikiyo Tamai, Kanji Okuda, Yuji Ichikawa, Kazuhiro Ogawa

International Journal of Fatigue　106876-106876　2022/08

DOI： 10.1016/j.ijfatigue.2022.106876 　

ISSN： 0142-1123

Dynamic recrystallization of Sn coatings on carbon-fiber-reinforced plastics during cold spray additive manufacturing Peer-reviewed

Jiayu Sun, Kenta Yamanaka, Shaoyun Zhou, Hiroki Saito, Yuji Ichikawa, Kazuhiro Ogawa, Akihiko Chiba

Additive Manufacturing　56　102949-102949　2022/08

DOI： 10.1016/j.addma.2022.102949 　

ISSN： 2214-8604

Influence of the Nozzle Inner Geometry on the Particle History During Cold Spray Process Peer-reviewed

C. A. Bernard, H. Takana, O. Lame, K. Ogawa, J.-Y. Cavaillé

Journal of Thermal Spray Technology　2022/05/11

DOI： 10.1007/s11666-022-01407-y 　

ISSN： 1059-9630

eISSN： 1544-1016

Effect of SiC Content and Particle Size on the Self-healing Property of Plasma-Sprayed Environmental Barrier Coatings Peer-reviewed

Kent MITANI, Hiroki SAITO, Yuji ICHIKAWA, Kazuhiro OGAWA, Takaya MASUDA, Naoki OKAMOTO

Journal of Japan Thermal Spray Society　59　(1)　27-32　2022/01

DOI： 10.11330/jtss.59.27 　

低圧コールドスプレーおよびレーザケレンを用いた鉄鋼構造物の新補修技術の提案 Peer-reviewed

羽鳥友雅, 齋藤宏輝, 市川裕士, 小川和洋, 加藤雄一, 本村孔作, 中野道人, 山下理道

溶射　2022

航空機エンジン材料の飛翔粒子高速衝突における吸収エネルギー評価 Peer-reviewed

生田裕也, 齋藤宏輝, 市川裕士, 小川和洋, 大田祐太朗, 榊原洋平

材料　2022

Improvement in the Self-Healing Property of Plasma-sprayed Environmental Barrier Coatings by SiC Addition Peer-reviewed

Takumi Kitahara, Kent Mitani, Hiroki Saito, Yuji Ichikawa, Kazuhiro Ogawa, Takuya Masuda

Journal of Thermal Spray Technology　31　(8)　2314-2326　2022

DOI： 10.1007/s11666-022-01441-w 　

ISSN： 1059-9630

eISSN： 1544-1016

Microstructure and corrosion study of Fe-based bulk metallic glass obtained by spark plasma sintering Peer-reviewed

L. Zarazúa-Villalobos, N. Mary, J. Soo-Hyun, K. Ogawa, H. Kato, Y. Ichikawa

Journal of Alloys and Compounds　880　2021/11/05

DOI： 10.1016/j.jallcom.2021.160399 　

ISSN： 0925-8388

Adhesion mechanism of Sn coatings on the carbon fiber reinforced plastics using cold spray technique Peer-reviewed

Jiayu Sun, Kenta Yamanaka, Shaoyun Zhou, Hiroki Saito, Yuji Ichikawa, Kazuhiro Ogawa, Akihiko Chiba

Applied Surface Science　579　151873-151873　2021/11

DOI： 10.1016/j.apsusc.2021.151873 　

ISSN： 0169-4332

Historical and prospective aspects of thermally sprayed coatings IV:application and recent tendency of thermal spraying Invited Peer-reviewed

Kazuhiro Ogawa

Zairyo/Journal of the Society of Materials Science, Japan　70　(4)　344-350　2021/04

DOI： 10.2472/jsms.70.344 　

ISSN： 0514-5163

eISSN： 1880-7488

コールドスプレー法による金属・無機・有機材料の異種材料固相成膜 Invited Peer-reviewed

小川和洋

溶接学会誌　90　(4)　279-287　2021

Ybシリケート耐環境コーティングの自己治癒性と組織安定性に及ぼすSiC添加の効果 Invited Peer-reviewed

小川和洋, 三谷健斗

日本ガスタービン学会誌　49　(4)　2021

異種材料常温接合とその接合界面状態 Invited Peer-reviewed

小川和洋

応用物理　9090　(1212)　738738-743743　2021

Development of Cu coating on ceramic substrates by low pressure cold spray and its deposition mechanism analysis Peer-reviewed

Minjae Yu, Yuji Ichikawa, Kazuhiro Ogawa

Materials Science Forum　1016 MSF　1703-1709　2021

DOI： 10.4028/www.scientific.net/MSF.1016.1703 　

ISSN： 0255-5476

eISSN： 1662-9752

From rheological to original three-dimensional mechanical modelling of semi-crystalline polymers: Application to a wide strain rate range and large deformation of Ultra-High Molecular Weight PolyEthylene Peer-reviewed

C. A. Bernard, O. Lame, T. Deplancke, J. Y. Cavaillé, K. Ogawa

Mechanics of Materials　151　2020/12

DOI： 10.1016/j.mechmat.2020.103640 　

ISSN： 0167-6636

Thermal gradient of in-flight polymer particles during cold spraying Peer-reviewed

C. A. Bernard, H. Takana, G. Diguet, K. Ravi, O. Lame, K. Ogawa, J. Y. Cavaillé

Journal of Materials Processing Technology　286　116805-116805　2020/12

DOI： 10.1016/j.jmatprotec.2020.116805 　

ISSN： 0924-0136

Contribution in optimization of Zn Cold-sprayed coating dedicated to corrosion applications Peer-reviewed

E. Lapushkina, S. Yuan, N. Mary, J. Adrien, K. Ogawa, B. Normand

Surface and Coatings Technology　400　(25)　126193　2020/10/25

DOI： 10.1016/j.surfcoat.2020.126193 　

ISSN： 0257-8972

Deposition Mechanism Analysis of Cold-Sprayed Fluoropolymer Coatings and Its Wettability Evaluation Peer-reviewed

Wesley Lock Sulen, Kesavan Ravi, Chrystelle Bernard, Yuji Ichikawa, Kazuhiro Ogawa

Journal of Thermal Spray Technology　29　(7)　1643-1659　2020/10/01

DOI： 10.1007/s11666-020-01059-w 　

ISSN： 1059-9630

eISSN： 1544-1016

Fundamental study of suspension plasma sprayed silicate coatings Peer-reviewed

Ryotaro Yanaoka, Yuji Ichikawa, Kazuhiro Ogawa, Takaya Masuda, Kazuto Sato

Materials Transactions　61　(7)　1390-1395　2020/07/01

DOI： 10.2320/matertrans.T-M2020826 　

ISSN： 1345-9678

eISSN： 1347-5320

ボンドコートへの内部酸化を利用した遮熱コーティングの耐はく離特性改善 Peer-reviewed

豪太 片柳, 裕士 市川, 和洋 小川, 匡 田附, 学 多田, 由貴 柴崎

日本溶射学会誌 溶射　57　(2)　97-104　2020/04

DOI： 10.11330/jtss.57.97 　

ISSN： 0916-6076 2186-1080

Control of Suspension Plasma Sprayed Yb Silicate coatings by means of SiO2-rich Suspension Peer-reviewed

Takumi Kitahrara, Ryotaro Yanaoka, Yuji Ichikawa, Kazuhiro Ogawa, Takaya Masuda, Kazuto Sato

57　(1)　20-26　2020/01

DOI： 10.11330/jtss.57.20 　

ISSN： 0916-6076 2186-1080

M3Influence of nanoceramic interlayer on polymer consolidation during cold-spray coating formation

Kesavan Ravi, Tiana Deplancke, Olivier Lame, Kazuhiro Ogawa, Jean Yves Cavaillé, Florent Dalmas

Journal of Materials Processing Technology　273　2019/11

DOI： 10.1016/j.jmatprotec.2019.116254 　

ISSN： 0924-0136

Stress development in thermal barrier coatings with morphology-controlled thermally grown oxide

Yijun Chai, Xiongwei Yang, Yueming Li, Kazuhiro Ogawa

Ceramics International　45　(16)　20435-20445　2019/11

DOI： 10.1016/j.ceramint.2019.07.020 　

ISSN： 0272-8842

Investigation of the Thermal Behavior of In-flight Polymer Particle during Cold-Spray Process

Chrystelle Bernard, Hidemasa Takana, Gildas Diguet, Kesavan Ravi, Oliver Lame, Kazuhiro Ogawa, Jean-Yves Cavaillé

Proceedings of the 19th International Symposium on Advanced Fluid Information (AFI-2019)　OS20-4　220-221　2019/11

Fabrication of micro-/nano-structured super-hydrophobic fluorinated polymer coatings by cold-spray Peer-reviewed

Kesavan Ravi, Wesley Lock Sulen, Chrystelle Bernard, Yuji Ichikawa, Kazuhiro Ogawa

Surface and Coatings Technology　373　17-24　2019/09/15

DOI： 10.1016/j.surfcoat.2019.05.078 　

ISSN： 0257-8972

Experimental and smoothed particle hydrodynamics analysis of interfacial bonding between aluminum powder particles and aluminum substrate by cold spray technique

Abreeza Manap, Tomonaga Okabe, Kazuhiro Ogawa, Savisha Mahalingam, Huda Abdullah

International Journal of Advanced Manufacturing Technology　103　(9-12)　4519-4527　2019/08/01

DOI： 10.1007/s00170-019-03846-4 　

ISSN： 0268-3768

eISSN： 1433-3015

Influence of microstructure on fatigue property of ultra high-strength steels Peer-reviewed

Kanji Okuda, Kazuhiro Ogawa, Yuji Ichikawa, Tsuyoshi Shiozaki, Naoki Yamaguchi

Frattura ed Integrita Strutturale　13　(48)　125-134　2019/04

DOI： 10.3221/IGF-ESIS.48.15 　

ISSN： 1971-8993

eISSN： 1971-8993

Elucidation of cold-spray deposition mechanism by auger electron spectroscopic evaluation of bonding interface oxide film Peer-reviewed

Yuji Ichikawa, Ryotaro Tokoro, Masatoshi Tanno, Kazuhiro Ogawa

Acta Materialia　164　39-49　2019/02/01

DOI： 10.1016/j.actamat.2018.09.041 　

ISSN： 1359-6454

Elaboration of sacrificial Zinc coating on carbon steel via High pressure cold spray technique

Elizaveta Lapushkina, Sheng Ying, Nicolas Mary, Kazuhiro Ogawa, Bernard Normand

Proceedings of the International Thermal Spray Conference　2019-May　259-264　2019

Development of fluoropolymer coating using low pressure cold spray

W. Lock Sulen, K. Ravi, Y. Ichikawa, K. Ogawa

Proceedings of the International Thermal Spray Conference　2019-May　252-258　2019

Fundamental Study of Suspension Plasma Sprayed Silicate Coatings Peer-reviewed

Ryotaro YANAOKA, Yuji ICHIKAWA, Kazuhiro OGAWA, Takaya MASUDA, Kazuto SATO

56　(1)　2-7　2019/01

The feasibility study of GaN coatings by cold spray technique Peer-reviewed

Shaoyun Zhou, Chrystelle A. Bernard, Kesavan Ravi, Yuji Ichikawa, Kazuhiro Ogawa

Proceedings of the International Thermal Spray Conference　2019-May　462-468　2019

Effects of nano-ceramic particle addition for cold sprayed fluoropolymer coatings Peer-reviewed

W. Lock Sulen, K. Ravi, C. Bernard, N. Mary, Y. Ichikawa, K. Ogawa

Key Engineering Materials　813 KEM　141-146　2019

DOI： 10.4028/www.scientific.net/KEM.813.141 　

ISSN： 1013-9826

eISSN： 1662-9795

Investigation of the Flow Field Dynamics during Cold-Spray of Polymers

C. A. Bernard, H. Takana, K. Ravi, O. Lame, K. Ogawa, J.-Y. Cavaille

Proceedings of the 15th International Conference on Flow Dynamics (ICFD2018)　OS17-6/CRF-95　850-851　2018/11

Effect of weld toe geometry on fatigue life of lap fillet welded ultra-high strength steel joints Peer-reviewed

Tsuyoshi Shiozaki, Naoki Yamaguchi, Yoshikiyo Tamai, Jiro Hiramoto, Kazuhiro Ogawa

International Journal of Fatigue　116　409-420　2018/11

DOI： 10.1016/j.ijfatigue.2018.06.050 　

ISSN： 0142-1123

Three-dimensional constitutive model for the description of high molecular weight semicrystalline polymers over a large range of temperatures and strain rates: Application to Ultra High Molecular Weight PolyEthylene Peer-reviewed

Chrystelle A. Bernard, Tiana Deplancke, Olivier Lame, Kazuhiro Ogawa, Jean Yves Cavaillé

EPJ Web of Conferences　183　(01016)　2018/09/07

DOI： 10.1051/epjconf/201818301016 　

ISSN： 2101-6275

eISSN： 2100-014X

Understanding deposition mechanism in cold sprayed ultra high molecular weight polyethylene coatings on metals by isolated particle deposition method Peer-reviewed

Kesavan Ravi, Tiana Deplancke, Kazuhiro Ogawa, Jean Yves Cavaillé, Olivier Lame

Additive Manufacturing　21　191-200　2018/05

DOI： 10.1016/j.addma.2018.02.022 　

ISSN： 2214-8604

eISSN： 2214-8604

Solidification Cracking Mechanism of Carbon Steel Weld Metal Peer-reviewed

American Welding Society

Welding Journal　97　(2)　55-64　2018/02/01

DOI： 10.29391/2018.97.005 　

ISSN： 0043-2296

High strain rate sensitivity of ultra-high molecular weight polyethylene and its consequence on cold-spray deposition behavior

Kesavan Ravi, Kazuhiro Ogawa, Tiana Deplancke, Olivier Lame, Jean Yves Cavaillé

Proceedings of the International Thermal Spray Conference　2018-May　371-374　2018

低温プラズマ溶射法によるグラファイト上への銅成膜挙動に及ぼす基材表面粗さの影響 Peer-reviewed

平山憲太, 市川裕士, 小川和洋, 成田章, 竹馬克洋

日本溶射学会誌 溶射　55　(1)　2-7　2018/01

Investigation of cold spray bonding mechanism focusing on the thin oxide film present in the deposition interface

Yuji Ichikawa, Ryotaro Tokoro, Kazuhiro Ogawa

Proceedings of the International Thermal Spray Conference　2018-May　238-241　2018

On the premise of polymer coating modelling for cold-spray process Peer-reviewed

C. A. Bernard, K. Ogawa, J. Y. Cavaillé, O. Lame, K. Ravi, T. Deplancke

Proceedings of the International Thermal Spray Conference　2018-May　366-370　2018

サスペンションプラズマ溶射法による耐環境セラミックコーティング成膜技術の開発 Invited Peer-reviewed

小川 和洋

機能材料　38　(7)　38-48　2018

優れた耐はく離性を有する遮熱コーティング Peer-reviewed

小川 和洋

日本材料科学学会誌　55　(6)　9　2018

Critical Deposition Condition of CoNiCrAlY Cold Spray Based on Particle Deformation Behavior Peer-reviewed

Yuji Ichikawa, Kazuhiro Ogawa

Journal of Thermal Spray Technology　26　(3)　340-349　2017/02/01

DOI： 10.1007/s11666-016-0477-6 　

ISSN： 1059-9630

eISSN： 1544-1016

Microstructural change and delamination resistance of the thermal barrier coatings with cold sprayed ce-content bond coats Peer-reviewed

Yuji Ichikawa, Shinnosuke Horiuchi, Kazuhiro Ogawa, Mitsuhiro Oikawa, Tadashi Tatsuki, Hiroyuki Yamazaki

Zairyo/Journal of the Society of Materials Science, Japan　66　(2)　142-149　2017/02

DOI： 10.2472/jsms.66.142 　

ISSN： 0514-5163

eISSN： 1880-7488

Report of International Thermal Spray Conference & Exposition (ITSC2017)

OGAWA Kazuhiro

JOURNAL OF THE JAPAN WELDING SOCIETY　86　(7)　524-526　2017

DOI： 10.2207/jjws.86.524 　

ISSN： 0021-4787

Experimental analysis of impact behavior of ultra-high molecular weight polyethylene-nano ceramics composite particles by isolated particle deposition method using downstream injection cold spray technique

Kesavan Ravi, Kazuhiro Ogawa, Olivier Lame, Jean Yves Cavaille

Proceedings of the International Thermal Spray Conference　1　51-55　2017

Microscale adhesion strength evaluation of cold sprayed copper deposit

Y. Ichikawa, R. Tokoro, K. Ogawa

Proceedings of the International Thermal Spray Conference　1　328-332　2017

Microstructural change and delamination resistance of the thermal barrier coatings with cold sprayed ce-content bond coats Peer-reviewed

Ichikawa Y, Horiuchi S, Ogawa K, Oikawa M, Tatsuki T, Yamazaki H

Zairyo/Journal of the Society of Materials Science, Japan　66　(2)　142-149　2017

Micro-scale strength evaluation for bonding interface of cold sprayed coatings Peer-reviewed

Yuji Ichikawa, Ryotaro Tokoro, Kazuhiro Ogawa

Materials Science Forum　879　795-800　2017

DOI： 10.4028/www.scientific.net/MSF.879.795 　

ISSN： 0255-5476

eISSN： 1662-9752

Possibility of Repair for Hot Section Parts of Gas Turbines by Cold Spray Technique Peer-reviewed

45　(6)　470-475　2017

ISSN： 0387-4168

Coupled Finite Elements – SPH simulation of particle impact and adhesion for Cold Spray Peer-reviewed

Paul Profizi, Alain Combescure, Kazuhiro Ogawa

11th International SPHERIC Workshop　2016/06

Improvement of Interfacial Strength for Thermal Barrier Coatings by Formation of Wedge-Like Thermally Grown Oxide Invited Peer-reviewed

Kazuhiro Ogawa, Shun Hatta, Hiroyuki Yamazaki

Additive Manufacturing and Strategic Technologies in Advanced Ceramics　258　149-157　2016/05/31

DOI： 10.1002/9781119236016.ch15 　

Numerical analysis of single particle impact in the context of Cold Spray: A new adhesion model

P. Profizi, A. Combescure, K. Ogawa

IOP Conference Series: Earth and Environmental Science　32　(1)　2016/04

DOI： 10.1088/1755-1315/32/1/012062 　

ISSN： 1755-1307

eISSN： 1755-1315

SPH modeling of adhesion in fast dynamics: Application to the Cold Spray process Peer-reviewed

Paul Profizi, Alain Combescure, Kahuziro Ogawa

Comptes Rendus - Mecanique　344　(4-5)　211-224　2016/04

DOI： 10.1016/j.crme.2016.02.001 　

ISSN： 1631-0721

eISSN： 1873-7234

Mechanical properties and deposition mechanism of cold-sprayed CoNiCrAlY/YSZ cermet Peer-reviewed

Kang Il Lee, Kazuto Sato, Kazuhiro Ogawa

Materials Transactions　57　(3)　385-391　2016

DOI： 10.2320/matertrans.T-M2016802 　

ISSN： 1345-9678

eISSN： 1347-5320

Mechanistic Study and Characterization of Cold-Sprayed Ultra-High Molecular Weight Polyethylene-Nano-ceramic Composite Coating Peer-reviewed

Kesavan Ravi, Yuji Ichikawa, Kazuhiro Ogawa, Tiana Deplancke, Olivier Lame, Jean Yves Cavaille

Journal of Thermal Spray Technology　25　(1-2)　160-169　2016/01/01

DOI： 10.1007/s11666-015-0332-1 　

ISSN： 1059-9630

eISSN： 1544-1016

Experimental and numerical analyses on the deposition behavior of spherical aluminum particles in the cold-spray-emulated high-velocity impact process Peer-reviewed

Kiyohiro Ito, Yuji Ichikawa, Kazuhiro Ogawa

Materials Transactions　57　(4)　525-532　2016

DOI： 10.2320/matertrans.T-M2016803 　

ISSN： 1345-9678

SPH modeling of fast impacts and particle rebound with adhesion Peer-reviewed

Paul Profizi, Alain Combescure, Kazuhiro Ogawa

12th World Congress on Computational Mechanics proceedings　2016

Development of cold spray emulated single particle shot system and evaluation of particle deposition behavior Peer-reviewed

伊藤 潔洋, 市川 裕士, 小川 和洋

溶射　52　(4)　2015/12

DOI： 10.11330/jtss.52.141 　

ISSN： 0916-6076 2186-1080

Characterization of microstructure, local deformation and microchemistry in Alloy 690 heat-affected zone and stress corrosion cracking in high temperature water

Junjie Chen, Tetsuo Shoji, Yoichi Takeda, Seiya Yamazaki

Journal of Nuclear Materials　2015/10

DOI： 10.1016/j.jnucmat.2015.06.025 　

ISSN： 0022-3115

Simulation of the cold spray particle deposition process Peer-reviewed

Jing Xie, Daniel Nélias, Hélène Walter Le Berre, Kazuhiro Ogawa, Yuji Ichikawa

Journal of Tribology　137　(4)　041101-1-041101-15　2015/10/01

DOI： 10.1115/1.4030257 　

ISSN： 0742-4787

eISSN： 1528-8897

Effect of Substrate Surface Oxide Film Thickness on Deposition Behavior and Deposition Efficiency in the Cold Spray Process Peer-reviewed

Yuji Ichikawa, Kazuhiro Ogawa

Journal of Thermal Spray Technology　24　(7)　1269-1276　2015/10/01

DOI： 10.1007/s11666-015-0299-y 　

ISSN： 1059-9630

eISSN： 1544-1016

Development of Ultra-High Molecular Weight Polyethylene (UHMWPE) Coating by Cold Spray Technique Peer-reviewed

Kesavan Ravi, Yuji Ichikawa, Tiana Deplancke, Kazuhiro Ogawa, Olivier Lame, Jean-Yves Cavaille

JOURNAL OF THERMAL SPRAY TECHNOLOGY　24　(6)　1015-1025　2015/08

DOI： 10.1007/s11666-015-0276-5 　

ISSN： 1059-9630

eISSN： 1544-1016

Influence of Surface Oxide Film on Deposition Behavior of Cold Spray Emulated Particle by Single Particle Shot System Peer-reviewed

Kiyohiro Ito, Yuji Ichikawa, Kazuhiro Ogawa

Thermal Spray 2015: Proceedings of the International Thermal Spray Conferenc　1　513-519　2015/05/11

Mechanistic Study and Characterization of Cold Sprayed Ultra High Molecular Weight Polyethylene-Nano Ceramic Composite Peer-reviewed

Kesavan Ravi, Yuji Ichikawa, Tiana Deplancke, Kazuhiro Ogawa, Olivier Lame, Jean-Yves Cavaille

Thermal Spray 2015: Proceedings of the International Thermal Spray Conferenc　585-591　2015/05/11

コールドスプレーを用いた生体用多孔質チタンコーティングの開発 Peer-reviewed

山崎泰広, 関翔馬, 佐藤達也, 大野直行, 曽根 通介, 市川裕士, 宮崎孝道, 小川和洋

溶射　52　(2)　62-67　2015

DOI： 10.11330/jtss.52.62 　

ISSN： 0916-6076

Improved Deposition Efficiency of Cold-Sprayed CoNiCrAlY with Pure Ni Coatings and Its High-Temperature Oxidation Behavior after Pre-Treatment in Low Oxygen Partial Pressure Peer-reviewed

Kang-Il Lee, Kazuhiro Ogawa

MATERIALS TRANSACTIONS　55　(9)　1434-1439　2014/09

DOI： 10.2320/matertrans.T-M2014829 　

ISSN： 1345-9678

eISSN： 1347-5320

DEPOSITION MECHANISM BASED ON NUMERICAL SIMULATION FOR THE COLD-SPRAYED AG COATINGS ON AL AND AISI304 SUBSTRATES Peer-reviewed

Jingfu ZHANG, Huajie HAN, Kazuhiro OGAWA, Alain COMBESCURE

Proceedings of the JSME/ASME 2014 International Conference on Material and Processing　2014/06

EPPECT OF NICKEL POWDER MIXING ON CONICRALY COATINGS BY COLD SPRAY Peer-reviewed

Kang-Il Lee, Kazuhiro Ogawa

Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing　2014/06

Experimental and SPH study of cold spray impact between similar and dissimilar metals Peer-reviewed

A. Manap, O. Nooririnah, H. Misran, T. Okabe, K. Ogawa

SURFACE ENGINEERING　30　(5)　335-341　2014/06

DOI： 10.1179/1743294413Y.0000000237 　

ISSN： 0267-0844

eISSN： 1743-2944

Micro-scale interface strength evaluation of cold sprayed deposit Peer-reviewed

Yuji ICHIKAWA, Yusuke WATANABE, Kazuhiro OGAWA, Hideo MIURA

Thermal Spray 2014: Proc. of ITSC2014　707-710　2014/05/21

Improvement of delamination resistant properties for thermal barrier coatings by formation wedge-like thermally grown oxide Peer-reviewed

S. Hatta, K. Ogawa, T. Takanezawa, H. Yamazaki

Proceedings of International Thermal Spray Conference 2014　2014/05

Iron boron based powders sprayed by high velocity spray processes Peer-reviewed

I. Ozdemir, K. Ogawa, K. Sato

SURFACE & COATINGS TECHNOLOGY　240　373-379　2014/02

DOI： 10.1016/j.surfcoat.2013.12.056 　

ISSN： 0257-8972

Influence of substrate materials on deposition behaviour of cold spray emulated pure single Al particle

K. Ito, Y. Ichikawa, K. Ogawa

Recent Advances in Structural Integrity Analysis - Proceedings of the International Congress (APCF/SIF-2014)　519-523　2014

DOI： 10.1533/9780081002254.519 　

Simulation of the Cold Spray Deposition Process for Aluminum and Copper using Lagrangian, ALE and CEL Methods Peer-reviewed

Daniel N{\'{e } }lias, Jing Xie, H{\'{e, l{\`{e } }ne Walter-Le Berre, Yuji Ichikawa, Kazuhiro Ogawa

Thermomechanical Industrial Processes　321-358　2014/01

DOI： 10.1002/9781118578759.ch7 　

Effects of Spark-Plasma Sintering Treatment on Cold-Sprayed Copper Coatings Peer-reviewed

K. Ito, K. Ogawa

JOURNAL OF THERMAL SPRAY TECHNOLOGY　23　(1-2)　104-113　2014/01

DOI： 10.1007/s11666-013-0047-0 　

ISSN： 1059-9630

eISSN： 1544-1016

Adhesion strength of ceramic top coat in thermal barrier coatings subjected to thermal cycles: Effects of thermal cycle testing method and environment

Masakazu Okazaki, Satoshi Yamagishi, Yasuhiro Yamazaki, Kazuhiro Ogawa, Hiroyuki Waki, Masayuki Arai

INTERNATIONAL JOURNAL OF FATIGUE　53　33-39　2013/08

DOI： 10.1016/j.ijfatigue.2012.02.014 　

ISSN： 0142-1123

eISSN： 1879-3452

Microtexture and Electrical and Mechanical Properties of the Cold-sprayed Copper Deposit Peer-reviewed

Yusuke Watanabe, Yuji Ichikawa, Kazuhiro Ogawa, Hideo Miura

ASME2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems(InterPACK2013)　1　2013/07/16

DOI： 10.1115/IPACK2013-73150 　

Effects of Spark Plasma Sintering Treatment for Cold-Sprayed Metallic Coatings Peer-reviewed

K. Ito, K. Ogawa

Proceedings of International Thermal Spray Conference 2013　143-148　2013/05

Influence of Carrier Gas Composition on Microstructures and Mechanical Properties of Cold-Sprayed Titanium Coatings Peer-reviewed

Y. Ichikawa, K. Ogawa, N. Nose, Y. Nomura, M. Takahashi, H. Amano

Proceedings of International Thermal Spray Conference 2013　2013/05

Thermally grown oxide growth behavior and its impedance properties of thermal barrier coatings with cold sprayed and low pressure plasma sprayed bond coatings Peer-reviewed

Kazuhiro Ogawa, Atsushi Nakano

Zairyo/Journal of the Society of Materials Science, Japan　62　(2)　131-136　2013/02

DOI： 10.2472/jsms.62.131 　

ISSN： 0514-5163 1880-7488

コールドスプレー施工したNi基超合金IN738LC 材のスプレー後熱処理条件の最適化 Peer-reviewed

小川和洋, 恩地智史

材料　61　(2)　131-136　2013

DOI： 10.2472/jsms.62.137 　

ISSN： 0514-5163

コールドスプレーおよび減圧プラズマ溶射によりボンドコートを施工した遮熱コーティングの熱成長酸化物成長挙動とそのインピーダンス特性 Peer-reviewed

小川和洋, 中野淳

材料　61　137-142　2013

DOI： 10.2472/jsms.62.131 　

Influence of crystallite size and lattice spacing on thermal condition of polycrystalline copper deposited by solid particle electron and phonon conduction Peer-reviewed

D. Seo, K. Ogawa, K. Sakaguchi, N. Miyamoto, Y. Tsuzuki

SURFACE & COATINGS TECHNOLOGY　207　233-239　2012/08

DOI： 10.1016/j.surfcoat.2012.06.078 　

ISSN： 0257-8972

Numerical Simulation of the Cold Spray Deposition Process for Aluminium and Copper Peer-reviewed

Jing Xie, Daniel Nelias, Hélène Walter-le Berre, Yuji Ichikawa, Kazuhiro Ogawa

ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis　1　109-111　2012/07/02

DOI： 10.1115/ESDA2012-82107 　

The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating Peer-reviewed

A. Manap, A. Nakano, K. Ogawa

JOURNAL OF THERMAL SPRAY TECHNOLOGY　21　(3-4)　586-596　2012/06

DOI： 10.1007/s11666-012-9749-y 　

ISSN： 1059-9630

Characterization of microstructure, local deformation and microchemistry in Alloy 600 heat-affected zone and stress corrosion cracking in high temperature water Peer-reviewed

Zhanpeng Lu, Tetsuo Shoji, Seiya Yamazaki, Kazuhiro Ogawa

CORROSION SCIENCE　58　211-228　2012/05

DOI： 10.1016/j.corsci.2012.01.029 　

ISSN： 0010-938X

Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process Peer-reviewed

Seungchan Cho, Kenta Takagi, Hansang Kwon, Dowon Seo, Kazuhiro Ogawa, Keiko Kikuchi, Akira Kawasaki

SURFACE & COATINGS TECHNOLOGY　206　(16)　3488-3494　2012/04

DOI： 10.1016/j.surfcoat.2012.02.021 　

ISSN： 0257-8972

SiO2 and MoSi2 formation on Inconel 625 surface via SiC coating deposited by cold spray Peer-reviewed

D. Seo, M. Sayar, K. Ogawa

SURFACE & COATINGS TECHNOLOGY　206　(11-12)　2851-2858　2012/02

DOI： 10.1016/j.surfcoat.2011.12.010 　

ISSN： 0257-8972

Numerical Analysis of Interfacial Bonding of Al-Si Particle and Mild Steel Substrate by Cold Spray Technique Using the SPH Method

MANAP Abreeza, OGAWA Kazuhiro, OKABE Tomonaga

JSMME　6　(3)　241-250　2012

DOI： 10.1299/jmmp.6.241 　

ISSN： 1880-9871

Parameter study influencing thermal conductivity of annealed pure copper coatings deposited by selective cold spray processes Peer-reviewed

D. Seo, K. Ogawa, K. Sakaguchi, N. Miyamoto, Y. Tsuzuki

SURFACE & COATINGS TECHNOLOGY　206　(8-9)　2316-2324　2012/01

DOI： 10.1016/j.surfcoat.2011.10.010 　

ISSN： 0257-8972

Influence of Specimen Shape and Bond Coating Process on Thermally Grown Oxide Growth at the Thermal Barrier Coating/Bond Coating Interface Peer-reviewed

Atsushi Nakano, Kazuhiro Ogawa

Proceedings of ATEM'11　2011/11

Numerical Analysis of Interfacial Bonding of Aluminum Powder Particle and Aluminum Substrate by Cold Spray Technique using the SPH Method Peer-reviewed

Abreeza Manap, Kazuhiro Ogawa, Tomonaga Okabe

Proceedings of the JSME/ASME 2011 ICMP2011　2011/06

Improvement of deposition efficiency and control of hardness for cold-sprayed coatings using high carbon steel/mild steel mixture powder Peer-reviewed

Kazuhiro Ogawa, Satoshi Amao, Nobuyuki Yokoyama, Kousuke Ootaki

Proceedings of the JSME/ASME 2011 ICMP2011　5　(12)　793-802　2011/06

DOI： 10.1299/jmmp.5.793 　

ISSN： 1880-9871

High-temperature oxidation behavior of cold-sprayed MCrAlY coatings Peer-reviewed

Yuji Ichikawa, Kazuhiro Ogawa, Isam Nonaka

Zairyo/Journal of the Society of Materials Science, Japan　60　(2)　159-166　2011/02

DOI： 10.2472/jsms.60.159 　

ISSN： 0514-5163

Computer simulation of cold sprayed deposition using smoothed particle hydrodynamics Peer-reviewed

A. Manap, T. Okabe, K. Ogawa

11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11)　10　1145-1150　2011

DOI： 10.1016/j.proeng.2011.04.190 　

ISSN： 1877-7058

Deposition of ceramic oxides in atmosphere and at room temperature using the powder jet deposition technique Peer-reviewed

K. Ogawa, H, Arata, M. Takegoshi, F. Ono, T. Saito

Proceedings of International Thermal Spray Conference 2011　2011

Characterization of Thermally Grown Oxide on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating Peer-reviewed

Abreeza Manap, Dowon Seo, Kazuhiro Ogawa

HIGH-TEMPERATURE OXIDATION AND CORROSION 2010　696　324-329　2011

DOI： 10.4028/www.scientific.net/MSF.696.324 　

ISSN： 0255-5476

Improvement of deposition efficiency and control of hardness for cold-sprayed coatings using high carbon steel/mild steel mixture powder Peer-reviewed

Kazuhiro Ogawa, Satoshi Amao, Nobuyuki Yokoyama, Kousuke Ootaki

Journal of Solid Mechanics and Materials Engineering　5　(12)　793-802　2011

DOI： 10.1299/jmmp.5.793 　

ISSN： 1880-9871

Iron boride coatings produced by cold spray processes

I.Ozdemir, K.Ogawa, K.Sato, D.Seo

Proceedings of International Thermal Spray Conference 2011　2011

nfluence of gas conditions in Cold Spraying on WC cermet coatings Peer-reviewed

K. Sato, D. Seo, H. Furukawa, J. Kitamura, K. Ogawa

Proceedings of International Thermal Spray Conference 2011　2011

Influence of metal binder of WC cermet powder for Cold Spray and HVOF

K. Sato, H. Furukawa, J. Kitamura, D. Seo, K. Ogawa

Proceedings of International Thermal Spray Conference 2011　2011

Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment Peer-reviewed

D. K. Christoulis, S. Guetta, E. Irissou, V. Guipont, M. H. Berger, M. Jeandin, J-G. Legoux, C. Moreau, S. Costil, M. Boustie, Y. Ichikawa, K. Ogawa

JOURNAL OF THERMAL SPRAY TECHNOLOGY　19　(5)　1062-1073　2010/09

DOI： 10.1007/s11666-010-9500-5 　

ISSN： 1059-9630

微粒子静電加速および基板形状最適化による超音速微粒子流動加工の高性能化

高奈秀匡, 李紅岩, 小川和洋, 西山秀哉

電気学会新エネルギー・環境研究会資料, FTE-10-050　2010　(41)　55-60　2010/08/26

Feasibility of Polycarbonate Coatings by Cold Spray Process Peer-reviewed

Dowon Seo, Nora Mahiou, Kazuhiro Ogawa, Tetsuo Shoji, Katsumi Ito, Ismail Tirtom

International Thermal Spray Conference & Exposition 2010　714-720　2010/05

Influence of asymmetric electrode geometry on an impedance spectrum of a plasma-sprayed thermal barrier coating system Peer-reviewed

Masatoshi Tanno, Kazuhiro Ogawa, Tetsuo Shoji

SURFACE & COATINGS TECHNOLOGY　204　(15)　2504-2509　2010/04

DOI： 10.1016/j.surfcoat.2010.01.030 　

ISSN： 0257-8972

Computational and Experimental Studies on Cavity Filling Process by Cold Gas Dynamic Spray Peer-reviewed

Hidemasa Takana, HongYang Li, Kazuhiro Ogawa, Tsunemoto Kuriyagawa, Hideya Nishiyama

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME　132　(2)　2010/02

DOI： 10.1115/1.4000802 　

ISSN： 0098-2202

S0306-2-4 Evaluation of high temperature oxidation behavior of a thermal barrier coating with a cold sprayed bond coating

OGAWA Kazuhiro, Manap Abreeza, Seo Dowon, Ichikawa Yuji, Nishimura Yoshiaki, Furukawa Atuyoshi

The proceedings of the JSME annual meeting　2010　35-36　2010

DOI： 10.1299/jsmemecjo.2010.1.0_35 　

J0401-2-2 Hardness control for cold sprayed coatings by using high carbon steel/mind steel mixture powder

OGAWA Kazuhiro, Amao Satoshi, Yokoyama Nobuyuki, Ohtaki Kosuke

The proceedings of the JSME annual meeting　2010　429-430　2010

DOI： 10.1299/jsmemecjo.2010.6.0_429 　

J0401-2-5 Investigation of Repairing for Damaged Zinc Coated Steel by the Cold Spray Technique

Ichikawa Yuji, OGAWA Kazuhiro, Nishimura Yoshiaki, Furukawa Atsuyosh

The proceedings of the JSME annual meeting　2010　435-436　2010

DOI： 10.1299/jsmemecjo.2010.6.0_435 　

Repairing of degraded hot section parts of gas turbines by cold spraying Peer-reviewed

Kazuhiro Ogawa, Takahiro Niki

ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII　417-418　545-548　2010

DOI： 10.4028/www.scientific.net/KEM.417-418.545 　

ISSN： 1013-9826

Collaborative Research on Adhesion Strength of Thermal Barrier Coatings in JSMS Peer-reviewed

OKAZAKI Masakazu, ITOH Akihiro, FUKANUMA Hirotaka, OHNO Naoyuki, KANEKO Hideaki, KAWAMURA Masashi, YAMAZAKI Yasuhiro, NAMBA Kouichi, OGAWA Kazuhiro, OHKI Motofumi, FUJIYAMA Kazunari, WAKI Hiroyuki, ARAI Masayuki, SEKIHARA Masaru

Journal of Solid Mechanics and Materials Engineering　4　(2)　252-263　2010

DOI： 10.1299/jmmp.4.252 　

ISSN： 1880-9871

Lasers and Thermal Spray Peer-reviewed

M. Jeandin, D. Christoulis, F. Borit, M. H. Berger, S. Guetta, G. Rolland, V. Guipont, E. Irissou, J. G. Legoux, C. Moreau, M. Nivard, L. Berthe, M. Boustie, W. Ludwig, K. Sakaguchi, Y. Ichikawa, K. Ogawa, S. Costil

THERMEC 2009, PTS 1-4　638-642　174-+　2010

DOI： 10.4028/www.scientific.net/MSF.638-642.174 　

ISSN： 0255-5476

A SOCRATIC APPROACH TO SURFACE MODIFICATION: THE EXAMPLE OF THERMAL SPRAY Peer-reviewed

M. Jeandin, D. Christoulis, F. Borit, M.H. Berger, S. Guetta, G. Rolland, V. Guipont, F. N’Guyen, D. Jeulin, E. Irissou, J.G. Legoux, C. Moreau, M. Nivard, L. Berthe, M. Boustie, W. Ludwig, K. Sakaguchi, Y. Ichikawa, K. Ogawa, S. Costil

Surface Modification Technologies XXIV　2010

多結晶Ni基超合金コールドスプレー皮膜の信頼性評価 Peer-reviewed

恩地智史, 仁木隆祐, 小川和洋, 吉岡洋明, 齊藤正弘

溶射　47　(1)　1-7　2010/01

ISSN： 0916-6076

コールドスプレーによるキャビティー充填加工の計算・実験統合解析

高奈秀匡, 李紅岩, 小川和洋, 西山秀哉

2009年度溶射合同講演大会（日本溶射協会第90回（2009年度秋季）全国講演大会・（社）高温学会溶射部会第18回溶射総合討論会）講演論文集　55-56　2009/12

粒子画像流速測定法(PIV)を用いたコールドスプレー粒子の速度評価

三上範大, 蓋暁輝, 小川和洋, 高奈秀匡, 西山秀哉, 石井清一, 松村哲, 安木政史

2009年度溶射合同講演論文集　57-58　2009/12

分子動力学法によるコールドスプレーで施工したNi基超合金粒子の付着メカニズムの基礎的検討 Peer-reviewed

恩地智史, 小川和洋, 久保百司

溶射　46　116-120　2009/12

Computational and Experimental Studies on Supersonic Particulate Jet Process for Cavity Filling

Hidemasa Takana, Hong Yang Li, Kazuhiro Ogawa, Tsunemoto Kuriyagawa, Hideya Nishiyama

Proceedings of the 9th International Symposium on Advanced Fuild Information and Transdiscriplinary Fluid Integration　122-123　2009/11

Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats Peer-reviewed

S. Guetta, M. H. Berger, F. Borit, V. Guipont, M. Jeandin, M. Boustie, Y. Ichikawa, K. Sakaguchi, K. Ogawa

JOURNAL OF THERMAL SPRAY TECHNOLOGY　18　(3)　331-342　2009/09

DOI： 10.1007/s11666-009-9327-0 　

ISSN： 1059-9630

Non-destructive microwave detection of layer thickness in degraded thermal barrier coatings using K- and W-band frequency range Peer-reviewed

M. Sayar, D. Seo, K. Ogawa

NDT & E INTERNATIONAL　42　(5)　398-403　2009/07

DOI： 10.1016/j.ndteint.2009.01.003 　

ISSN： 0963-8695

Cold spraying combined to laser surface pre-treated using PROTAL Peer-reviewed

D.K Christoulis, S. Guetta, V. Guipont, MH. Berger, M. Jeandin, M. Boustie, S. Costil, Y. Ichikawa, K. Ogawa, E. Irissou, JG. Legoux, C. Moreau

Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications　1151-1156　2009/05/06

DOI： 10.1361/cp2009itsc1151 　

Influence of high-temperature creep stress on growth of thermally grown oxide in thermal barrier coatings Peer-reviewed

D. Seo, K. Ogawa, Y. Nakao, H. Miura, T. Shoji

SURFACE & COATINGS TECHNOLOGY　203　(14)　1979-1983　2009/04

DOI： 10.1016/j.surfcoat.2009.01.029 　

ISSN： 0257-8972

Early stage SCC initiation analysis of fcc Fe-Cr-Ni ternary alloy at 288 °C: A quantum chemical molecular dynamics approach Peer-reviewed

Nishith Kumar Das, Ken Suzuki, Kazuhiro Ogawa, Tetsuo Shoji

Corrosion Science　51　(4)　908-913　2009/04

DOI： 10.1016/j.corsci.2009.01.005 　

ISSN： 0010-938X

Effect of welded mechanical heterogeneity on local stress and strain ahead of stationary and growing crack tips Peer-reviewed

He Xue, Kazuhiro Ogawa, Tetsuo Shoji

NUCLEAR ENGINEERING AND DESIGN　239　(4)　628-640　2009/04

DOI： 10.1016/j.nucengdes.2008.12.024 　

ISSN： 0029-5493

J0404-1-2 Influence of particle size distribution on deposition of Ni base superalloy particles by cold spray technique

OGAWA Kazuhiro, NIKI Tkahahiro

The proceedings of the JSME annual meeting　2009　347-348　2009

DOI： 10.1299/jsmemecjo.2009.6.0_347 　

J0404-1-4 Deposition Mechanism Analysis of Cold Sprayed Ni-base Superalloy Coatings Using First Principle Calculation and Molecular Dynamics Method

Onchi Satoshi, Ogawa Kazuhiro, Kubo Momoji

The proceedings of the JSME annual meeting　2009　351-352　2009

DOI： 10.1299/jsmemecjo.2009.6.0_351 　

COMPUTATIONAL AND EXPERIMENTAL STUDIES ON CAVITY FILLING PROCESS BY COLD GAS DYNAMIC SPRAY Peer-reviewed

Hidemasa Takana, HongYang Li, Kazuhiro Ogawa, Tsunemoto Kuriyagawa, Hideya Nishiyama

IMECE 2008: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS, VOL 10, PTS A-C　435-444　2009

Density functional study of atomic oxygen and water molecule adsorption on chromium substituted Ni surface Peer-reviewed

N. K. Das, K. Suzuki, Y. Takeda, K. Ogawa, T. Shoji

Molecular Simulation　2009

コールドスプレー法による鋼粒子の成膜およびその特性評価 Peer-reviewed

天尾聡, 市川裕士, 小川和洋, 深沼博隆

溶射　46　1-5　2009/01

Comparative study on oxidation behavior of selected MCrAlY coatings by elemental concentration profile analysis Peer-reviewed

D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, S. Murata

APPLIED SURFACE SCIENCE　255　(5)　2581-2590　2008/12

DOI： 10.1016/j.apsusc.2008.07.141 　

ISSN： 0169-4332

Characterization of Low-Pressure Cold-Sprayed Aluminum Coatings

K. Ogawa, K. Ito, K. Ichimura, Y. Ichikawa, S. Ohno, N. Onda

JOURNAL OF THERMAL SPRAY TECHNOLOGY　17　(5-6)　728-735　2008/12

DOI： 10.1007/s11666-008-9254-5 　

ISSN： 1059-9630

Characterization of Low-Pressure Cold-Sprayed Aluminum Coatings Peer-reviewed

K. Ogawa, K. Ito, K. Ichimura, Y. Ichikawa, S. Ohno, N. Onda

JOURNAL OF THERMAL SPRAY TECHNOLOGY　17　(5-6)　728-735　2008/12

DOI： 10.1007/s11666-008-9254-5 　

ISSN： 1059-9630

Effect of critical plasma spray parameter on properties of hollow cathode plasma sprayed alumina coatings

S. Yugeswaran, V. Selvarajan, D. Seo, K. Ogawa

Surface and Coatings Technology　2008/10

DOI： 10.1016/j.surfcoat.2008.08.030 　

ISSN： 0257-8972

Fabrication of Yttria-Stabilized Zirconia Thin Film Under Room Temperature Atmospheric Pressure Conditions Peer-reviewed

Tatsuya Sone, Kazuhisa Sato, Keiji Yashiro, Kazuhiro Ogawa, Tatsuya Kawada, Tsunemoto Kuriyagawa, Toshiyuki Hashida, Junichiro Mizusaki

Proceedings of the 3rd JSME/ASME International Conference on Material and Processing　2008/10

Difference in High-Temperature Oxidation Behavior Between Cold-Sprayed and Low-Pressure Plasma-Sprayed MCralY Coating Peer-reviewed

Yuji Ichikawa, Kazuhiro Ogawa, Tetsuo Shoji

Proceedings of the 3rd JSME/ASME International Conference on Material and Processing　2008/10

Stress corrosion cracking analysis of Fe (111) and Fe-Cr (111) surface at different temperatures by quantum chemical molecular dynamics Peer-reviewed

N. K. Das, K. Suzuki, Y. Takeda, K. Ogawa, T. Shoji

16th Pacific Basin Nuclear Conference　2008/10

Control of Charged Nano/Micro Particle Behavior in an Impinging Supersonic Jet

Hidemasa Takana, Kazuhiro Ogawa, Tsunemoto Kuriyagawa, Hideya Nishiyama

Abstracts of the 14th International Congress on Plasma Physics (ICPP2008)　259-259　2008/09/08

ナノ・マイクロ粒子ジェットとキャビティ基板との衝突干渉制御による超音微粒子ジェット加工の高度化

高奈秀匡, 李紅岩, 小川和洋, 厨川常元, 西山秀哉

日本流体力学会年会2008講演要旨集　2008　220-220　2008/09/04

Quantum chemical molecular dynamics study of strain effect on metal and oxide interface interaction at high temperature

N.K. Das, K. Suzuki, Y. Takeda, K. Ogawa, T. Shoji

EUROCORR 2008, September 7-11 2008, Edinburgh, Scotland　(1226)　2008/09

超音速微粒子ジェット加工のおけるナノ・マイクロ粒子流とキャビティー基板との衝突干渉制御

高奈秀匡, 李紅岩, 小川和洋, 厨川常元, 西山秀哉

日本混相流学会年会講演会2008　226-227　2008/08/08

ナノ・マイクロ粒子高速流動の衝突過程とキャビティー充填加工の高度化

高奈秀匡, 李紅岩, 小川和洋, 厨川常元, 西山秀哉

日本機械学会2008年年次大会講演論文集　8　237-238　2008/08/02

DOI： 10.1299/jsmemecjo.2008.8.0_237 　

Computational simulation on performance enhancement of cold gas dynamic spray processes with electrostatic assist Peer-reviewed

Hidemasa Takana, Kazuhiro Ogawa, Tetsuo Shoji, Hideya Nishiyama

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME　130　(8)　1-7　2008/08

DOI： 10.1115/1.2907417 　

ISSN： 0098-2202

Computational simulation of cold spray process assisted by electrostatic force Peer-reviewed

Hidemasa Takana, Kazuhiro Ogawa, Tetsuo Shoji, Hideya Nishiyama

POWDER TECHNOLOGY　185　(2)　116-123　2008/07

DOI： 10.1016/j.powtec.2007.10.005 　

ISSN： 0032-5910

Quantum chemical molecular dynamics study of stress corrosion cracking behavior for fcc Fe and Fe-Cr surfaces Peer-reviewed

Nishith Kumar Das, Ken Suzuki, Yoichi Takeda, Kazuhiro Ogawa, Tetsuo Shoji

Corrosion Science　50　(6)　1701-1706　2008/06

DOI： 10.1016/j.corsci.2008.01.032 　

ISSN： 0010-938X

Theoretical design of SCC resistant Ni-based alloy by a computational chemistry approach Peer-reviewed

N. K. Das, K. Suzuki, Y. Takeda, K. Ogawa, T. Shoji

Proceedings of the 2008 International Congress on Advances in Nuclear Power Plants　2008/06

Fe(111) AND Fe-Cr(111) SURFACE H2O INTERACTION AT DIFFERENT TEMPERATURES BY QUANTUM CHEMICAL MOLECULAR DYNAMICS

Nishith Kumar Das, Ken Suzuki, Yoichi Takeda, Kazuhiro Ogawa, Tetsuo Shoji

Proceedings of JSCE Materials and Environments 2008, Oomiya, Japan　(A-302)　105-108　2008/05/15

キャビティーを有する基板への超音速微粒子ジェット加工の高性能化

高奈秀匡, 李紅岩, 小川和洋, 厨川常元, 西山秀哉

平成19年度衝撃波シンポジウム講演論文集　163-164　2008/03/17

High-temperature oxidation behavior and surface roughness evolution of VPSNiCrAlY coating Peer-reviewed

D. Seo, K. Ogawa, T. Shoji, S. Murata

JOURNAL OF THERMAL SPRAY TECHNOLOGY　17　(1)　136-143　2008/03

DOI： 10.1007/s11666-007-9150-4 　

ISSN： 1059-9630

1242 Fabrication and Evaluation of Functional Oxide Thin Film by using Powder Jet Deposition Method

SATO Kazuhisa, SONE Tatsuya, YASHIRO Keiji, OGAWA Kazuhiro, KAWADA Tatsuya, KURIYAGAWA Tsunemoto, HASHIDA Toshiyuki, MIZUSAKI Junichiro

The proceedings of the JSME annual meeting　2008　329-330　2008

DOI： 10.1299/jsmemecjo.2008.6.0_329 　

Development of a nondestructive evaluation technique for degraded thermal barrier coatings using microwave

M. Sayar, K. Ogawa, T. Shoji

REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 27A AND 27B　975　1536-1542　2008

DOI： 10.1063/1.2902618 　

ISSN： 0094-243X

Time-dependent Transition of Chemical Elements in Plasma Sprayed MCrAlY Coatings under High Temperature Oxidation Peer-reviewed

Dowon Seo, Kazuhiro Ogawa, Yusuke Suzuki, Kenji Ichimura, Tetsuo Shoji, Shozo Murata

Surface Modification Technologies XXI　479-487　2008

Mechanical and High Temperature Oxidation Properties of Cold Sprayed CoNiCrAlY Coatings for Thermal Barrier Coating Peer-reviewed

Takahiro NIKI, Kazuhiro OGAWA, Tetsuo SHOJI

Journal of Solid Mechanics and Materials Engineering　2　(6)　739-747　2008

DOI： 10.1299/jmmp.2.739 　

ISSN： 1880-9871

Deposition mechanism of cold sprayed MCrAlY coatings focused on nanostructure

Y. Ichikawa, T. Miyazaki, K. Ogawa, M. Jeandin, T. Shoji

Proceedings of the 2008 International Thermal Spray Conference & Exposition, CD-ROM, 2008　2008

Influence of thermal cycling on residual stresses in a thermal barrier coating with a kinetic metallization sprayed bond coating

T. Niki, K. Ogawa, T. Shoji

Proceedings of the 2008 International Thermal Spray Conference & Exposition, CD-ROM, 2008　2008

Role of high temperature creep stress in thermally grown oxide growth of thermal barrier coatings

D. Seo, K. Ogawa, Y. Nakao, D. Seo, H. Miura, T. Shoji

Proceedings of the 2008 International Thermal Spray Conference & Exposition, CD-ROM, 2008　2008

Multiscale modeling approach to stress corrosion cracking Peer-reviewed

Ismail Tirtom, Nishith Kumar Das, Ken Suzuki, Kazuhiro Ogawa, Tetsuo Shoji

International Conference on Advances in Nuclear Power Plants, ICAPP 2008　4　2081-2089　2008

Integral Layer Profile Analysis Investigation of High Temperature Oxidation of MCrAlY Coatings Peer-reviewed

D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, S. Murata

International Gas Turbine Congress 2007 Tokyo　2007/12

Effect of particle size distribution on isothermal oxidation characteristics of plasma sprayed CoNi- and CoCrAlY coatings Peer-reviewed

Dowon Seo, Kazuhiro Ogawa, Tetsuo Shoji, Shozo Murata

JOURNAL OF THERMAL SPRAY TECHNOLOGY　16　(5-6)　954-966　2007/12

DOI： 10.1007/s11666-007-9131-7 　

ISSN： 1059-9630

静電加速によるマイクロ・ナノ粒子超音速ジェット加工の高性能化 Peer-reviewed

高奈秀匡, 小川和洋, 庄子哲雄, 西山秀哉

日本機械学会第85期流体工学部門講演会講演論文集　(07-16)　114　2007/11

Dynamics of Water/Oxide/Metal Interfaces and Mechanisms of Environmentally Assisted Cracking Peer-reviewed

D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, S. Murata

Proceedings of the International Symposium on Research for Aging Management of Light Water Reactors and Its Future Trend (The 15th Anniversary of INSS), Fukui City, JAPAN　7.1-24　2007/10

Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process

Takahiro Niki, Kazuhiro Ogawa, Tetsuo Shoji

Key Engineering Materials　2007/09/10

DOI： 10.4028/www.scientific.net/kem.353-358.537 　

ISSN： 1662-9795

Collaboration Tasks on Physical and Fundamental Properties of Plasma Sprayed Thermal Barrier Coatings in Japan Society of Materials Science

Kazuhiro Ogawa

Key Engineering Materials　2007/09/10

DOI： 10.4028/www.scientific.net/kem.353-358.1806 　

ISSN： 1662-9795

Optimization of Cold Gas Dynamic Spray Processes by Computational Simulation Peer-reviewed

Hidemasa Takana, Kazuhiro Ogawa, Tetsuo Shoji, Hideya Nishiyama

Proceedings of the 5th Joint ASME/JSME Fluids Engineering Conference, FEDSM2007　2007/07/30

DOI： 10.1115/FEDSM2007-37081 　

Influence of heat exposure time on isothermal degradation of plasma sprayed CoNiCrAlY coatings Peer-reviewed

D. Seo, K. Ogawa, M. Tanno, T. Shoji, S. Murata

SURFACE & COATINGS TECHNOLOGY　201　(18)　7952-7960　2007/06

DOI： 10.1016/j.surfcoat.2007.03.040 　

ISSN： 0257-8972

Evaluation of adhesive strength of thermal-sprayed hydroxyapatite coatings using the LAser Shock Adhesion Test (LASAT) Peer-reviewed

Yuji Ichikawa, Sophie Barradas, Francois Borit, Vincent Guipont, Michel Jeandin, Mariette Nivard, Laurent Berthe, Kazuhiro Ogawa, Tetsuo Shoji

MATERIALS TRANSACTIONS　48　(4)　793-798　2007/04

DOI： 10.2320/matertrans.48.793 　

ISSN： 1345-9678

eISSN： 1347-5320

静電加速によるマイクロ・ナノ粒子超音速ジェットの制御特性

高奈秀匡, 小川和洋, 庄子哲雄, 西山秀哉

平成18年度衝撃波シンポジウム講演論文集　239-240　2007/03/15

Collaboration tasks on Fundamental properties of Plasma Sprayed TBCs in JSMS Peer-reviewed

K. Ogawa, M. Okazaki

Key Engineering Materials　353-358　(0)　1806-1810　2007/02/01

Report on 6th Japan-China Bilateral Symposium on High Temperature Strength of Materials

OGAWA Kazuhiro

journal of the Japan Society for Testing Materials　56　(12)　1194-1194　2007

DOI： 10.2472/jsms.56.1194 　

ISSN： 0514-5163

Adhesion study of cold-sprayed CoNiCrAIY-Mo coating of inconel 625 using the LAser Shock Adhesion Test (LASAT) Peer-reviewed

Y. Ichikawa, K. Ogawa, M. Nivard, L. Berthe, M. Boustie, M. Ducos, S. Barradas, M. Jeandin

THERMEC 2006, PTS 1-5　539-543　1086-+　2007

ISSN： 0255-5476

Experimental Investigation of Isothermal Degradation of VPS NiCrAlY Overlay Coating in Simulated Gas Turbine Environment Peer-reviewed

D. Seo, K. Ogawa, T. Shoji, S. Murata

Journal of Thermal Spray Technology　2007

Segregation of alloying elements of directionally solidified nickel based superalloy CM247LC during creep degradation process Peer-reviewed

Takahiro Niki, Kazuhiro Ogawa, Tetsuo Shoji

PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4　353-358　537-540　2007

ISSN： 1013-9826

Mechanical and High Temperature Oxidation Properties of Thermal Barrier Coating with Kinetic Metallization Sprayed CoNiCrAlY Bond Coating Peer-reviewed

Kazuhiro Ogawa, Takahiro Niki, Yuji Ichikawa, Dowon Seo, Tetsuo Shoji

Proceedings of ATEM'07　2007

Non-destructive evaluation of creep damage of Ni-based superalloy using a scanning blue laser microscope Peer-reviewed

Kuniaki Akahoshi, Kazuhiro Ogawa, Hideo Miura

PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4　353-358　2391-2394　2007

ISSN： 1013-9826

Development of signal processing circuit of a magnetic camera for the NDT of a paramagnetic material Peer-reviewed

Jongwoo Jun, Jiseong Hwang, Keejoo Kim, Kazuhiro Ogawa, Jinyi Lee

PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4　353-358　2379-+　2007

ISSN： 1013-9826

A study of magnetic charge per unit area of dipole model for the NDE Peer-reviewed

Jiseong Hwang, Jongwoo Jun, Seho Choi, Cheolwoong Kim, Kazuhiro Ogawa, Jinyi Lee

PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4　353-358　2371-+　2007

ISSN： 1013-9826

Collaboration tasks on physical and fundamental properties of plasma sprayed thermal barrier coatings in Japan Society of Materials Science Peer-reviewed

Kazuhiro Ogawa

PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4　353-358　1806-1809　2007

ISSN： 1013-9826

Mechanical Properties of Cold Sprayed Aluminum Coatings Peer-reviewed

Kazuhiro Ogawa, Kenji Ichimura, Yuji Ichikawa, Tetsuo Shoji

Surface Modification Technologies XXI　489-495　2007

Deposition Mechanisms of Low Pressure Type Cold Sprayed Aluminum Coatings Peer-reviewed

Yuji Ichikawa, Kiyohiro Ito, Kazuhiro Ogawa, Tetsuo Shoji

Surface Modification Technologies XXI　497-506　2007

Effect of Particle Size Range on the Thermally Grown Oxide Scale Formation on Vacuum Plasma Sprayed CoNi- and CoCrAlY Coatings

D.W.Seo, K.Ogawa, T.Shoji, S.Murata

Proceedings of the 2007 International Thermal Spray Conference & Exposition, CD-ROM, 2007　2007

Deposition Mechanisms of Cold Gas Dynamic Sprayed MCrAlY Coatings

Y.Ichikawa, K.Sakaguchi, K.Ogawa, T.Shoji, S.Barradas, M.Jeandin

Proceedings of the 2007 International Thermal Spray Conference & Exposition, CD-ROM, 2007　2007

Electrostatic Assist on a Cold Spray Process by Computational Simulation

H.Takana, K.Ogawa, T.Shoji, H.Nishiyama

Proceedings of the 2007 International Thermal Spray Conference & Exposition, CD-ROM, 2007　2007

Creep damage mechanisms in Ni-base superalloys focusing on the distribution of alloying elements in gamma and gamma ' phases

Kazuhiro Ogawa, Takahiro Niki, Kohei Nobusawa, Tetsuo Shoji

INTEGRATED APPROACHES FOR MATERIALS AND STRUCTURAL SAFETY　35-38　2007

Effects of Ce and Si additions to CoNiCrAIY bond coat materials on oxidation behavior and crack propagation of thermal barrier coatings

K. Ogawa, K. Ito, T. Shoji, D. W. Seo, H. Tezuka, H. Kato

JOURNAL OF THERMAL SPRAY TECHNOLOGY　15　(4)　640-651　2006/12

DOI： 10.1361/105996306X147081 　

ISSN： 1059-9630

Effects of Ce and Si additions to CoNiCrAIY bond coat materials on oxidation behavior and crack propagation of thermal barrier coatings Peer-reviewed

K. Ogawa, K. Ito, T. Shoji, D. W. Seo, H. Tezuka, H. Kato

JOURNAL OF THERMAL SPRAY TECHNOLOGY　15　(4)　640-651　2006/12

DOI： 10.1361/105996306X147081 　

ISSN： 1059-9630

静電加速によるコールドスプレープロセスの高性能化数値実験

高奈秀匡, 小川和洋, 庄子哲雄, 西山秀哉

日本溶射協会第84回全国大会講演大会講演論文集　5-6　2006/11/27

Computational Simulation on Acceleration of Micro/Nano Particle in Supersonic Jet by Electrostatic Force

H. Takana, K. Ogawa, T. Shoji, H. Nishiyama

Proceedings of the 3rd InternationalConference on Flow Dynamics, Matsushima, Miyagi　65-66　2006/11/08

Comparative Study on Oxidation Resistant Compositions of selected MCrAlY Overlay Coatings under Isothermal Exposure Peer-reviewed

Dowon Seo, Kazuhiro Ogawa, Tetsuo Shoji

The 2nd Asian Thermal Spray Conference, Gyeongju, Korea, ATSC　68-69　2006/11

コールドスプレープロセスの高性能化のための数値実験

高奈秀匡, 小川和洋, 庄子哲雄, 西山秀哉

日本機械学会流体工学部門講演会講演概要集　(06-21)　19　2006/10/29

Quantitative NDE of Surface Cracks in Ceramic Materials by means of a High-Frequency Electromagnetic Wave Peer-reviewed

Mikiko Suzuki, Kazuhiro Ogawa, Tetsuo Shoji

Materials Transactions　47　(6)　1605-1610　2006/06/15

DOI： 10.2320/matertrans.47.1605 　

ISSN： 1345-9678

4017 Several Techniques for Improving the Detection Probability of the Magnetic Camera

LEE Jinyi, HWANG Jiseong, OGAWA Kazuhiro, CHOI Seho, JUN Jongwoo, SHOJI Tetsuo

The proceedings of the JSME annual meeting　2006　963-964　2006

DOI： 10.1299/jsmemecjo.2006.1.0_963 　

Application of Mechanically Ground and Refractory Ultra-Fine Powders For Thermal Barrier Coatings Peer-reviewed

Kazuhiro Ogawa, Oleg P. Solonenko, Yuji Ichikawa, Masatoshi Tanno, Vladimir A. Poluboyarov, Anatoly N. Cherepanov, Andrei E. Lapin, Tetsuo Shoji

Proceedings of 18th International Conference on Surface Modification Technologies　2006

Quantitative NDE of Surface Crack in Ceramic Materials by a High-Frequency Signal Transmission Characteristics Technique Peer-reviewed

Mikiko Suzuki, Kazuhiro Ogawa, Tetsuo Shoji

Materials Transaction　2006

DOI： 10.2320/matertrans.47.1605 　

Powder Jet Deposition of Ceramic Films Peer-reviewed

N. Yoshihara, T. Kuriyagawa, Y. Yasutomi, K. Ogawa

Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century　833　833-838　2005/10/19

Creating new interface between tooth and biomaterials using powder-jet technology Peer-reviewed

M.Noji, K.Sasaki, T.Kuriyagawa, O.Suzuki, K.Ogawa, M.Kanehira

International Congress Series　1284　302-304　2005/09

DOI： 10.1016/j.ics.2005.07.009 　

NDE of Artificial and Natural Cracks in Alumina Ceramics by a High-Frequency Signal Transmission Characteristics Technique Peer-reviewed

Mikiko Suzuki, Kazuhiro Ogawa, Tetsuo Shoji

The Third US-Japan Symposium on Advancing Applications and Capabilities in NDE　2005/06

Characterization of oxide film formed on austenitic stainless steel by in-situ Micro Raman Spectroscopy Peer-reviewed

A Kai, Y Terayama, K Ogawa, T Shoji

ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4　297-300　2806-2812　2005

ISSN： 1013-9826

Development on stress monitoring method for measurement of cyclic stress of railway axles Peer-reviewed

SJ Kwon, K Ogawa, T Shoji

ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4　297-300　84-89　2005

ISSN： 1013-9826

Development of Highly Molten Chloride Corrosion Resistant Coatings Assisted by Mechano-chemical Reaction Peer-reviewed

Yuji ICHIKAWA, Kazuhiro OGAWA, Tetsuo SHOJI, Oleg P. SOLONENKO

Proceedings of International Thermal Spray Conference & Exposition 2005　2005

Fracture toughness tests of wheelset materials used in the Japanese Shinkansen express trains Peer-reviewed

J Dzugan, Y Ito, S Kwon, K Ogawa, T Shoji

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS　218　(L4)　263-271　2004/11

DOI： 10.1243/1464420042722255 　

ISSN： 1464-4207

Failure detection of thermal barrier coatings using impedance spectroscopy Peer-reviewed

NQ Wu, K Ogawa, M Chyu, SX Mao

THIN SOLID FILMS　457　(2)　301-306　2004/06

DOI： 10.1016/j.tsf.2003.10.009 　

ISSN： 0040-6090

Improvement of bond strength of thermal barrier coatings by a laser remelting process Peer-reviewed

M Tanno, K Ogawa, T Shoji, A Ohmori

Thermal Spray 2004: Advances in Technology and Application, Proceedings　1076-1081　2004

Development of novel non-destructive inspection technique using high-frequency signal transmission characteristics Peer-reviewed

T Baba, K Ogawa, T Shoji

ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2　261-263　949-954　2004

ISSN： 1013-9826

Aging of high speed train wheelsets and its quantitative characteristics based on fracture mechanics for optimization of in-service inspection Peer-reviewed

SJ Kwon, K Ogawa, T Shoji

ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2　261-263　1037-1042　2004

ISSN： 1013-9826

Effect of cerium and silicon additions to MCrAIY on the high-temperature oxidation behavior and bond strength of thermal barrier coatings Peer-reviewed

M Tanno, K Ogawa, T Shoji

ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2　261-263　1061-1066　2004

ISSN： 1013-9826

Nondestructive evaluation of defects in conductive and non-conductive materials by high-frequency signal transmission characteristics technique Peer-reviewed

K Ogawa, T Baba, M Suzuki, T Shoji

ADVANCES IN NONDESTRUCTIVE EVALUATION, PT 1-3　270-273　1712-1718　2004

ISSN： 1013-9826

Theoretical modeling and experimental study of thermal barrier coatings Peer-reviewed

OP Solonenko, MA Anatol'yevich, KE Vladimirovich, BM Petrovna, K Ogawa, T Shoji, M Tanno

MATERIALS TRANSACTIONS　44　(11)　2311-2321　2003/11

DOI： 10.2320/matertrans.44.2311 　

ISSN： 1345-9678

eISSN： 1347-5320

Evaluation of Bond Strength of Laser Remelted Thermal Barrier Coatings Peer-reviewed

MTanno, K.Ogawa, S.O.Chwa, A.Omori, T.SHOJI

日本溶射協会第７７回全国講演大会　77　47-48　2003

The Influence of thermal Barrier Top Coating on The Initiation and Growth of Thermally Grown Oxide Peer-reviewed

K.Ogawa, N.Gotoh, T.Shoji

Thermal Spray 2003, Advancing the Science& Applying the Technology　1565-1571　2003

Characterization of Fracture Mechanics of High Speed Train Wheelsets Depending on Aging Effects and on the Location Examined Peer-reviewed

Seok Jin Kwon, Kazuhiro Ogawa, Tetsuo Shoji

STECH03　2003　287-292　2003

Sensitivity of a Stress Measurement Method for Copper Electroplating Using the Effects of Stress Concentration Peer-reviewed

S.J.Kwon, T.Kinji, K.Ogawa, T.Shoji

Computational Methods and Experimental Measurements XI　2003

Influence of Thermal Aging on Interface Delamination of Thermal Barrier Coatings Peer-reviewed

Takamasa Onoki, Tetsuro Tonomori, Kazuhiro Ogawa, Toshiyuki Hashida, Tetsuo Shoji, Masahide Maruyama, Hiroyuki Togashi, Taiji Torigoe

Zairyo/Journal of the Society of Materials Science, Japan　52　(7)　807-814　2003

DOI： 10.2472/jsms.52.807 　

ISSN： 0514-5163

レーザー再溶融処理による熱遮へいコーティングの界面強度改善 Peer-reviewed

丹野昌利, 小川和洋, 庄子哲雄, 左相玉, 大森明

溶射　40　(4)　159-165　2003

ISSN： 0916-6076

Some peculiarities of YSZ splats formation under plasma spraying of thermal barrier Invited Peer-reviewed

O.Solonenko, A.Mikhalchenko, E.Kartaev, K.Ogawa, T.Shoji, M.Tanno

Proceedings of 16th International Symposium on Plasma Chemistry　2003

Growth Kinetics of Thermally Grown Oxide in Thermal Barrier Coatings Peer-reviewed

Kazuhiro Ogawa, Noritake Gotoh, Tetsuo Shoji

Advanced Materials and Processes for Gas Turbines　2002/09

NDI Technique by Impedance Spectroscopy Peer-reviewed

Kazuhiro Ogawa

Journal of The Japanese Society for Non-Destructive Inspection　51　(5)　275-280　2002/05

Development of Thermal Barrier Coatings for Enhancement of delamination resistant property Peer-reviewed

Toshiki Kato, Kazuhiro Ogawa, Tetsuo Shoji

Journal of Jpan Thermal Spraying Society　39　(2)　52-57　2002/04

Improvement of Interface Bond Strength Between Ceramic Thermal Barrier Coatingsand Metallic Bond Coatings Peer-reviewed

Kazuhiro Ogawa, Toshiki Kato, Tetsuo Shoji

Proceedings of the International Thermal Spray Conference 2002　900-904　2002/03

Model Studying Zirconia Droplet Deposition and Solidification on Substrate Under Plasma Spraying: Theory and Experimental Verification Peer-reviewed

O.Solonenko, A.Mikhalchenko, E.Kartaev, K.Ogawa, T.Shoji

The fifth JSME-KSME Fluids Engineering Conference Abstract　2002

Evaluation of thermal stress analysis and fracture mechanics evaluation of wheel for high-speed train due to the failure of tread cleaner Peer-reviewed

SJ Kwon, K Ogawa, T Shoji

COMPUTERS IN RAILWAYS VIII　13　701-710　2002

ISSN： 1462-608X

High Temperature Oxidation Behavior of the Interface Between Thermal Barrier Coatings and MCrAlY Bond Coatings Peer-reviewed

K.Ogawa, N.Gotoh, T.Shoji, M.Sato

Proceedings of APCFS & ATEM'01　1　297-302　2001/10

DOI： 10.1299/jsmeatemapcfs.1.01.203.0_297 　

Nondestructive Evaluation of High-Temperature Oxidation Behaviour in Thermal Barrier Coatings Peer-reviewed

N.Gotoh, K.Ogawa, T.Shoji, H.Togashi

Proceedings of APCFS & ATEM'01　1　303-308　2001/10

DOI： 10.1299/jsmeatemapcfs.1.01.203.0_303 　

Thermal Aging Embrittlement of Service-Exposed Udimet 520 Gas Tyrbine Blade Peer-reviewed

Y.Ogawa, T.Shoji, S.Komazaki, K.Ogawa, M.Maruyama

Proceedings of APCFS & ATEM'01　2　1086-1090　2001/10

DOI： 10.1299/jsmeatemapcfs.2.01.03.0_1086 　

Mechanistic understanding for degraded thermal barrier coatings Peer-reviewed

K Ogawa, T Shoji, H Aoki, N Fujita, T Torigoe

JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING　44　(4)　507-513　2001/10

DOI： 10.1299/jsmea.44.507 　

ISSN： 1344-7912

NDE of Degradation in Thermal Barrier Coatings Under The Influence of A High Temperature Environment Peer-reviewed

Kazuhiro OGAWA, Tetsuo SHOJI, Hideki CHIBA, Hiroki ABE, Taiji TORIGOE

Journal of the Japan Society for Non-Destructive Inspection　50　(3)　164-169　2001/03

ISSN： 0367-5866

QNDE of degradation in thermal barrier coatings using impedance spectroscopy Peer-reviewed

K Ogawa, N Gotoh, D Minkov, T Shoji

REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 20A AND 20B　557　1140-1147　2001

Kinetics of thermally grown oxide at interface between thermal barrier coatings and MCrAlY bond coatings Peer-reviewed

K Ogawa, T Masuda, T Shoji

THERMAL SPRAY 2001: NEW SURFACES FOR A NEW MILLENNIUM　187-194　2001

In situ NDT of degradation of thermal barrier coatings using impedance spectroscopy Peer-reviewed

K Ogawa, T Shoji, Abe, I, H Hashimoto

MATERIALS EVALUATION　58　(3)　476-481　2000/03

ISSN： 0025-5327

Mechanistic understanding for degraded thermal barrier coatings Peer-reviewed

Kazuhiro Ogawa, Tetsuo Shoji, Hisahiko Aoki, Norio Fujita, Taiji Torigoe

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A　66　(647)　1370-1376　2000

DOI： 10.1299/kikaia.66.1370 　

ISSN： 0387-5008

NDE of degradation of thermal barrier coating by means of impedance spectroscopy Peer-reviewed

K Ogawa, D Minkov, T Shoji, M Sato, H Hashimoto

NDT & E INTERNATIONAL　32　(3)　177-185　1999/04

DOI： 10.1016/S0963-8695(98)00069-3 　

ISSN： 0963-8695

NDE of Degraded Thermal Barrier Coating by means of Impedance Spectroscopy (1st report - sensitivity analysis of impedance behavior) Peer-reviewed

Kazuhiro OGAWA, Tetsuo SHOJI

Jounal of Non-Destructive Inspection　48　(2)　91-97　1999/02

NDE of Degraded Thermal Barrier Coating Using Impedance Spectroscopy (2nd report-Thickness evaluation of thermal barrier coating) Peer-reviewed

Kazuhiro OGAWA, Tetsuo SHOJI, Jinyi LEE

Jounal of Non-Destructive Inspection　48　(2)　98-105　1999/02

ISSN： 0367-5866

Health Diagnosis of Functionally Graded C/SiC Coating on C/C Composites Peer-reviewed

Y.Wakamatsu, T.Shoji, K.Ogawa, I.Hino

Materials Science Forum　308　416-421　1999

FGM用CVD-SiCのIS法による非破壊評価 Peer-reviewed

若松義男, 庄子哲雄, 小川和洋, 小野文衛

1998年度傾斜機能材料論文集<FGM'98>　149-154　1998/09

Nondestructive Evaluation of Degradation of Thermal Barrier Coating by an Impedance Spectroscopy Method Peer-reviewed

K.Ogawa, D.Minkov, T.Shoji

The 9th Asia-Pacific Conference on Nondestructive Testing, Anaheim, California, USA　23　(27)　43-46　1998

SiCコ-ティングのインピ-ダンス特性について Peer-reviewed

若松義男, 庄子哲雄, 小川和洋, 斎藤俊仁

1997年度傾斜機能材料論文集<FGM'97>　101-106　1997/10

Estimation of Tensile Shear Strength of Spot Welded Joint of Steel Sheets Peer-reviewed

Makoto KABASAWA, Yoshimasa FUNAKAWA, Kazuhiro OGAWA, Manabu TAMURA

Quart.J.Japan Weld.Soc.　14　(4)　754-761　1996

DOI： 10.2207/qjjws.14.754 　

ISSN： 0288-4771

Fatigue properties of fillet welded lap joints of high strength steel sheets for automobiles Peer-reviewed

Akihide Yoshitake, Masayuki Kinoshita, Koichi Osawa, Kazuhiro Ogawa, Hirotaka Nakagawa, Makoto Kabasawa

SAE Technical Papers　(940249)　1-6　1994

DOI： 10.4271/940249 　

RESIDUAL-STRESS CONTROL OF AL CFRP MULTILAYERED HYBRID COMPOSITE-MATERIAL Peer-reviewed

O HAGA, H KOYAMA, K KAWADA, K OGAWA

RESIDUAL STRESSES - III : SCIENCE AND TECHNOLOGY, VOLS 1 AND 2　1　76-81　1992

Residual Stress Control of Al/CFRP Hybrid Composite Material Peer-reviewed

Osamu Haga, Hideo Koyama, Katumi Kawada, Kazuhiro Ogawa

Journal of the Society of Materials Science, Japan　41　(464)　728-733　1992

DOI： 10.2472/jsms.41.728 　

ISSN： 1880-7488 0514-5163

Improvement of Fatigue Property of Al/CFRP Hybrid Composite Material by Residual Stress Control Peer-reviewed

Osamu Haga, Hideo Koyama, Katumi Kawada, Kazuhiro Ogawa

Journal of the Society of Materials Science, Japan　41　(464)　734-739　1992

DOI： 10.2472/jsms.41.734 　

ISSN： 1880-7488 0514-5163