Settling of Particle in Foaming Slag Peer-reviewed

Shin’ichi Shimasaki, Shigeru Ueda, Noritaka Saito, Kenji Katoh

ISIJ International　64　(15)　2195-2202　2024/12/30

DOI： 10.2355/isijinternational.isijint-2024-274 　

ISSN： 0915-1559

eISSN： 1347-5460

Terminal Settling Velocity of Particle in Suspension Peer-reviewed

Shin’ichi Shimasaki, Shigeru Ueda, Noritaka Saito

ISIJ International　64　(15)　2186-2194　2024/12/30

DOI： 10.2355/isijinternational.isijint-2024-269 　

ISSN： 0915-1559

eISSN： 1347-5460

Terminal Settling Velocity of Particle in Suspension Peer-reviewed

Shin-ichi Shimasaki, Shigeru Ueda, Noritaka Saito

Tetsu-to-Hagané　2024/04

DOI： 10.2355/tetsutohagane.TETSU-2023-111 　

SeparationofPhosphorusfromPhosphorus-concentrated Steelmaking Slag Peer-reviewed

Takayuki Iwama, Ryo Inoue, Kenji Nakase, Shigeru Ueda

ISIJ International　2024

DOI： 10.2355/isijinternational.isijint-2023-495 　

ISSN： 0915-1559

Chemical and Mechanical Factors on Phosphorus Dissolution Behavior from P-concentrated Slag Peer-reviewed

Takayuki Iwama, Ryo Inoue, Kenji Nakase, Shigeru Ueda

ISIJ International　64　(14)　1956-1966　2024

DOI： 10.2355/isijinternational.ISIJINT-2024-234 　

ISSN： 0915-1559

Apparent Viscosity Measurement of Gas–liquid Multiphase Fluids by the Falling Ball Method

Yusaku Mita, Takayuki Iwama, Huafang Yu, Shin-ichi Shimasaki, Noritaka Saito, Ryo Inoue, Shigeru Ueda

ISIJ International　2024

DOI： 10.2355/isijinternational.isijint-2024-246 　

ISSN： 0915-1559

eISSN： 1347-5460

Estimation of Flow Properties and Process Simulation on Multiphase Melts Peer-reviewed

Yoshihiko Higuchi, Shin'ichi Shimasaki, Shigeru Ueda, Noritaka Saito

Tetsu-to-Hagane　2024

DOI： 10.2355/tetsutohagane.tetsu-2023-103 　

ISSN： 0021-1575

eISSN： 1883-2954

Settling of Particle in Foaming Slag Peer-reviewed

Shin'ichi Shimasaki, Shigeru Ueda, Noritaka Saito, Kenji Katoh

Tetsu-to-Hagane　2024

DOI： 10.2355/tetsutohagane.tetsu-2023-101 　

ISSN： 0021-1575

eISSN： 1883-2954

Falling Angle of Fe-C-Based Alloy Droplet on Coke and Graphite

Takayuki Iwama, Huafang Yu, Naoto Yasuda, Ryo Inoue, Shigeru Ueda

Steel Research International　94　(10)　2023/10

DOI： 10.1002/srin.202300142 　

ISSN： 1611-3683

eISSN： 1869-344X

Measurement of SnO Activity Coefficient in CaO–SiO2–FetO–Al2O3 Slag Saturated with Fe

Yasunari Shinoda, Takayuki Iwama, Mizuki Kato, Hiromitsu Watanabe, Satoshi Nakagawara, Hiroki Takasu, Yukitaka Kato, Ryo Inoue, Shigeru Ueda

Journal of Sustainable Metallurgy　9　(4)　1444-1455　2023/09/13

DOI： 10.1007/s40831-023-00736-8 　

ISSN： 2199-3823

eISSN： 2199-3831

Chemical and Mechanical Factors on Phosphorus Dissolution Behavior from P-concentrated Slag

Takayuki Iwama, Ryo Inoue, Kenji Nakase, Shigeru Ueda

Tetsu-to-Hagane　109　(8)　661-672　2023/08/01

DOI： 10.2355/tetsutohagane.tetsu-2023-009 　

ISSN： 0021-1575

eISSN： 1883-2954

Molten Oxide Electrolysis Using Copper-Containing Carbon-Saturated Molten Iron Anode

Shungo Natsui, Takahiro Sato, Akihisa Ito, Miho Hayasaka, Takayuki Iwama, Kota Mori, Shigeru Ueda, Hiroshi Nogami

Journal of The Electrochemical Society　170　(2)　2023/02/02

DOI： 10.1149/1945-7111/acb84f 　

ISSN： 0013-4651

eISSN： 1945-7111

Effect of Cooling Condition and Oxidation of P-concentrated Slag on Phosphorus Dissolution Behavior

Takayuki Iwama, Ryo Inoue, Kenji Nakase, Shigeru Ueda

ISIJ International　63　(5)　799-809　2023

DOI： 10.2355/isijinternational.ISIJINT-2022-450 　

ISSN： 0915-1559

Effect of Si Ion Concentrations on the Phosphorous Ion Separation from the Solution Containing Ca, Si, and P Ions by Ion-exchange Membrane Electrodialysis

Huafang Yu, Akito Kumachi, Takehito Hiraki, Shigeru Ueda, Yasushi Sasaki

ISIJ International　63　(11)　1923-1926　2023

DOI： 10.2355/isijinternational.ISIJINT-2023-246 　

ISSN： 0915-1559

Separation of Phosphorus from Phosphorus-concentrated Steelmaking Slag

Takayuki Iwama, Ryo Inoue, Kenji Nakase, Shigeru Ueda

Tetsu-to-Hagane　109　(1)　1-12　2023

DOI： 10.2355/tetsutohagane.tetsu-2022-061 　

ISSN： 0021-1575

eISSN： 1883-2954

Dissolution Behavior of Mg and Ca from Dolomite Refractory into Al-killed Molten Steel

Ying Ren, Chunyang Liu, Xu Gao, Lifeng Zhang, Shigeru Ueda, Shin Ya Kitamura

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　108　(8)　491-500　2022/08

DOI： 10.2355/tetsutohagane.TETSU-2021-114 　

ISSN： 0021-1575

A proposed formation mechanism of the Type-A radiocaesium-bearing microparticles released from Units 2/3 during the Fukushima Daiichi Nuclear Power Plant accident

Lichun Zheng, Baiqiang Yan, Bo Peng, Huabing Li, Zhouhua Jiang, Shigeru Ueda

JOURNAL OF NUCLEAR MATERIALS　563　2022/05

DOI： 10.1016/j.jnucmat.2022.153623 　

ISSN： 0022-3115

eISSN： 1873-4820

Recovery of high-quality phosphate from steelmaking slag by a hydrometallurgical process

Chuan ming Du, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Science of the Total Environment　819　2022/05/01

DOI： 10.1016/j.scitotenv.2022.153125 　

ISSN： 0048-9697

eISSN： 1879-1026

Chemical interactions between ZrO<inf>2</inf>/α-Zr structured Zircaloy-4 and 316 stainless steel-B<inf>4</inf>C melt at 1300 °C

Lichun Zheng, Feiyu Wang, Huabing Li, Zhouhua Jiang, Shigeru Ueda

Journal of Nuclear Materials　559　2022/02

DOI： 10.1016/j.jnucmat.2021.153416 　

ISSN： 0022-3115

eISSN： 1873-4820

Extraction of Rare Earth Metal Oxide Inclusion Particles in Steel

Kouki Maeda, Shigeru Ueda, Ryo Inoue

ISIJ International　62　(5)　904-911　2022

DOI： 10.2355/isijinternational.ISIJINT-2021-424 　

ISSN： 0915-1559

Dissolution Behavior of Mg and Ca from Dolomite Refractory into Al-killed Molten Steel Peer-reviewed

Ying Ren, Chunyang Liu, Xu Gao, Lifeng Zhang, Shigeru Ueda, Shin-ya Kitamura

ISIJ International　61　(9)　2391-2399　2021/09/15

DOI： 10.2355/isijinternational.isijint-2020-241 　

ISSN： 0915-1559

eISSN： 1347-5460

Control of Hydration of Free Magnesia in Steelmaking Slag Peer-reviewed

Ryo Inoue, Madoka Uchidate, Shiori Kusukawa, Natsumi Kado, Yasushi Takasaki, Shigeru Ueda

Journal of Sustainable Metallurgy　7　(3)　818-830　2021/09

DOI： 10.1007/s40831-021-00401-y 　

ISSN： 2199-3823

eISSN： 2199-3831

Experimental Determination of the MnO Activity Coefficient in High-Manganese Slags Using the Chemical Equilibrium Method Peer-reviewed

Elizaveta Cheremisina, Xu Gao, Shigeru Ueda, Shin-ya Kitamura, Ryo Yamashina, Johannes Schenk

Metals　11　(8)　1190-1190　2021/07/26

DOI： 10.3390/met11081190 　

eISSN： 2075-4701

Influence of Glass Structure on the Dissolution Behavior of Fe from Glassy Slag of CaO–SiO2–FeOx System Peer-reviewed

Shohei Koizumi, Xu Gao, Sohei Sukenaga, Koji Kanehashi, Takafumi Takahashi, Shigeru Ueda, Shin-ya Kitamura

Journal of Sustainable Metallurgy　7　(2)　583-596　2021/06

DOI： 10.1007/s40831-021-00357-z 　

ISSN： 2199-3823

eISSN： 2199-3831

Effects of slag composition and impurities of alloys on the inclusion transformation during industrial ladle furnace refining

Chunyang Liu, Yi Jia, Lixia Hao, Shaowei Han, Fuxiang Huang, Huixiang Yu, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

Metals　11　(5)　2021/05

DOI： 10.3390/met11050763 　

eISSN： 2075-4701

Design of a Novel Fertilizer Made from Steelmaking Slag Using the Glassy Phase of the CaO–SiO<inf>2</inf>–FeO System. Part II: Evaluation of the Novel Fertilizer in a Paddy Soil Environment

Shohei Koizumi, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Journal of Sustainable Metallurgy　7　(1)　99-114　2021/03

DOI： 10.1007/s40831-020-00315-1 　

ISSN： 2199-3823

eISSN： 2199-3831

Design of a Novel Fertilizer Made of Steelmaking Slag Using the Glassy Phase of the CaO–SiO<inf>2</inf>–FeO System. Part I: Optimization on the Slag Chemistry and Microstructure

Shohei Koizumi, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Journal of Sustainable Metallurgy　7　(1)　87-98　2021/03

DOI： 10.1007/s40831-020-00320-4 　

ISSN： 2199-3823

eISSN： 2199-3831

Recovery of Phosphorus from ModifiedSteelmaking Slag with High P₂O₅ Content via Leaching and Precipitation Peer-reviewed

Chuan-ming Du, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Tetsu-to-Hagane　107　(2)　103-111　2021

DOI： 10.2355/tetsutohagane.tetsu-2020-030 　

ISSN： 0021-1575

eISSN： 1883-2954

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag Peer-reviewed

Chuan ming Du, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Journal of Sustainable Metallurgy　6　(4)　724-738　2020/12

DOI： 10.1007/s40831-020-00309-z 　

ISSN： 2199-3823

eISSN： 2199-3831

Interaction coefficient between Al and Sn in molten high Al steel Peer-reviewed

Kengo Sugiyama, Shigeru Ueda, Xu Gao, Sunjoong Kim, Shin Ya Kitamura

ISIJ International　60　(10)　2147-2151　2020/10/15

DOI： 10.2355/isijinternational.ISIJINT-2019-550 　

ISSN： 0915-1559

eISSN： 1347-5460

Composition Changes of Inclusions by Reaction with Slag and Refractory: A Review Peer-reviewed

Chunyang Liu, Xu Gao, Shigeru Ueda, Muxing Guo, Shin-ya Kitamura

ISIJ International　60　(9)　1835-1848　2020/09/15

DOI： 10.2355/isijinternational.isijint-2019-695 　

ISSN： 0915-1559

eISSN： 1347-5460

Sulfide capacities of solid oxides in calcium-aluminate systems

Yosuke Baba, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

ISIJ International　60　(8)　1617-1623　2020/08/15

DOI： 10.2355/isijinternational.ISIJINT-2019-793 　

ISSN： 0915-1559

Numerical study of binary trickle flow of liquid iron and molten slag in coke bed by smoothed particle hydrodynamics Peer-reviewed

Shungo Natsui, Kazui Tonya, Hiroshi Nogami, Tatsuya Kikuchi, Ryosuke O. Suzuki, Ko Ichiro Ohno, Sohei Sukenaga, Tatsuya Kon, Shingo Ishihara, Shigeru Ueda

Processes　8　(2)　221　2020/02/01

DOI： 10.3390/pr8020221 　

eISSN： 2227-9717

Influence of gasification reaction of coke on sliding and dynamic contact angles of droplets in a blast furnace Peer-reviewed

Shinsuke Ogyu, Lichun Zheng, Xu Gao, Shigeru Ueda, Sohei Sukenaga, Shin Ya Kitamura

ISIJ International　60　(7)　1401-1408　2020

DOI： 10.2355/ISIJINTERNATIONAL.ISIJINT-2019-190 　

ISSN： 0915-1559

Extraction of phosphorus and recovery of phosphate from steelmaking slag by selective leaching Peer-reviewed

Takayuki Iwama, Chuan Ming Du, Shohei Koizumi, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

ISIJ International　60　(2)　400-407　2020

DOI： 10.2355/isijinternational.ISIJINT-2019-298 　

ISSN： 0915-1559

Influence of atmosphere and basicity on softening and melting behaviors of the CaO-FeO-SiO<inf>2</inf>-Al<inf>2</inf>O<inf>3</inf>-MgO System Peer-reviewed

Shigeru Ueda, Takahiro Miki, Sun Joong Kim, Xu Gao, Hiroshi Nogami, Shin Ya Kitamura

ISIJ International　60　(7)　1380-1388　2020

DOI： 10.2355/ISIJINTERNATIONAL.ISIJINT-2019-136 　

ISSN： 0915-1559

eISSN： 1347-5460

Selective Leaching of P from Steelmaking Slag in Sulfuric Acid Solution Peer-reviewed

Chuan ming Du, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Journal of Sustainable Metallurgy　5　(4)　594-605　2019/12/01

DOI： 10.1007/s40831-019-00252-8 　

ISSN： 2199-3823

eISSN： 2199-3831

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process Peer-reviewed

Chuan Ming Du, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

Hydrometallurgy　189　105109　2019/11

DOI： 10.1016/j.hydromet.2019.105109 　

ISSN： 0304-386X

Preface for Thematic Section: Sustainable Iron and Steelmaking Peer-reviewed

Il Sohn, Shigeru Ueda

Journal of Sustainable Metallurgy　5　(3)　275　2019/09/15

DOI： 10.1007/s40831-019-00231-z 　

ISSN： 2199-3823

Selective Reduction of Phosphorus from Manganese Ore to Produce Ferromanganese Alloy with Low Phosphorus Content Peer-reviewed

Dong Jun Shin, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Journal of Sustainable Metallurgy　5　(3)　362-377　2019/09/15

DOI： 10.1007/s40831-019-00227-9 　

ISSN： 2199-3823

eISSN： 2199-3831

Extraction of Phosphorus and Manganese from Steelmaking Slag Invited Peer-reviewed

Shin-ya Kitamura, Shigeru Ueda, Xu Gao, Dong Jun Shin, Chuan-ming Du

Proceedings of 2019 Metallurgy Innovation Symposium　2019/09

Interaction Parameter Between Al and Sn in Molten High Al Steel (vol 105, pg 373, 2019) Peer-reviewed

Sugiyama Kengo, Ueda Shigeru, Gao Xu, Kim Sunjoong, Kitamura Shin-ya

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN　105　(9)　938　2019/09

ISSN： 0021-1575

Extraction of Phosphorus and Recovery of Phosphate from Steelmaking Slag by Selective Leaching (vol 105, pg 479, 2019) Peer-reviewed

Iwama Takayuki, Du Chuan-ming, Koizumi Shohei, Gao Xu, Ueda Shigeru, Kitamura Shin-ya

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN　105　(9)　939　2019/09

ISSN： 0021-1575

Separation of Phosphorus and Manganese from Steelmaking Slag by Selective Reduction Peer-reviewed

Dong Jun Shin, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science　50　(3)　1248-1259　2019/06/15

DOI： 10.1007/s11663-019-01556-6 　

ISSN： 1073-5615

Dissolution behavior of fe from CaO-SiO<inf>2</inf>-FeO<inf>x</inf> glassy phase Peer-reviewed

Shohei Koizumi, Gao Xu, Shigeru Ueda, Shin Ya Kitamura

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　105　(6)　664-673　2019/06/01

DOI： 10.2355/tetsutohagane.TETSU-2018-120 　

ISSN： 0021-1575

選択浸出による製鋼スラグからのリンの抽出とリン酸塩の回収 Peer-reviewed

岩間崇之, 杜伝明, 小泉匠平, 高旭, 植田滋, 北村信也

鉄と鋼　105　(4)　479-487　2019/04

Extraction of phosphorus and recovery of phosphate from steelmaking slag by selective leaching Peer-reviewed

Takayuki Iwama, Chuan Ming Du, Shohei Koizumi, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　105　(4)　69-77　2019/04/01

DOI： 10.2355/tetsutohagane.TETSU-2018-128 　

ISSN： 0021-1575

Measurement of the Activity Coefficients of P and Mn in Carbon-Saturated Fe-P-Mn-C Alloy Peer-reviewed

Dong Jun Shin, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science　50　(2)　825-833　2019/04

DOI： 10.1007/s11663-019-01520-4 　

ISSN： 1073-5615

Measures to decrease and utilize steelmaking slag Peer-reviewed

Chuan-ming Du, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

J. Sustain. Metall.　5　(1)　141-153　2019/03

溶鋼中AlとMoの相互作用係数の測定 Peer-reviewed

呂 寧寧, 高旭, 植田滋, 北村信也

鉄と鋼　105　(3)　378-381　2019/03

1723Kにおける溶融高Al鉄中のAlとSiの相互作用係数 Peer-reviewed

杉山謙悟, 高旭, 植田滋, 北村信也

鉄と鋼　105　(3)　373-377　2019/03

Measurement on the interaction parameter between Al and Mo in molten steel Peer-reviewed

Ningning Lv, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　105　(3)　36-39　2019/03

DOI： 10.2355/tetsutohagane.TETSU-2018-102 　

ISSN： 0021-1575

Interaction parameter between Al and Sn in molten high Al steel Peer-reviewed

Kengo Sugiyama, Shigeru Ueda, Xu Gao, Sunjoong Kim, Shin Ya Kitamura

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　105　(3)　31-35　2019/03

DOI： 10.2355/tetsutohagane.TETSU-2018-057 　

ISSN： 0021-1575

Change in Composition of Inclusions through the Reaction between Al-killed Steel and the Slag of CaO and MgO Saturation Peer-reviewed

Chunyang Liu, Xu Gao, Shigeru Ueda, Shin ya Kitamura

ISIJ International　59　(2)　268-276　2019/02

DOI： 10.2355/isijinternational.ISIJINT-2018-584 　

ISSN： 0915-1559

Erratum: Extraction of phosphorus and recovery of phosphate from steelmaking slag by selective leaching (Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan (2019) 105:4 (479-487) DOI: 10.2355/tetsutohagane.TETSU-2018-128)

Takayuki Iwama, Chuan Ming Du, Shohei Koizumi, Xu Gao, Shigeru Ueda, Shin Ya Kitamura

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　105　(9)　939　2019

DOI： 10.2355/tetsutohagane.105.939 　

ISSN： 0021-1575

Contribution of Mineralogical Phases on Alkaline Dissolution Behavior of Steelmaking Slag Peer-reviewed

Zuoqiao Zhu, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

ISIJ INTERNATIONAL　59　(10)　1908-1916　2019

DOI： 10.2355/isijinternational.ISIJINT-20I9-049 　

ISSN： 0915-1559

eISSN： 1347-5460

Alkali elution of various mineralogical phases in steelmaking slag

Zuoqiao Zhu, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Minerals, Metals and Materials Series　215-220　2019/01/01

DOI： 10.1007/978-3-030-10386-6_25 　

ISSN： 2367-1181

Solubility of sulfur in the solid oxide of the calcium-aluminate system Peer-reviewed

Sun joong Kim, Masaaki Kageyama, Xu Gao, Shigeru Ueda, Shin ya Kitamura

ISIJ International　59　(10)　1752-1755　2019/01/01

DOI： 10.2355/isijinternational.ISIJINT-2019-127 　

ISSN： 0915-1559

Contribution of mineralogical phases on alkaline dissolution behavior of steelmaking slag

Zuoqiao Zhu, Xu Gao, Shigeru Ueda, Shin ya Kitamura

ISIJ International　59　(10)　1908-1916　2019

DOI： 10.2355/isijinternational.ISIJINT-2019-049 　

ISSN： 0915-1559

eISSN： 1347-5460

Effect of Fe2+/T.Fe Ratio on the Dissolution Behavior of P from Steelmaking Slag with High P2O5 Content Peer-reviewed

Chuan-ming Du, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Journal of Sustainable Metallurgy　4　(4)　443-454　2018/12

Measurement on Interaction Parameter between Co and Al in Molten High Al Steel Peer-reviewed

Ningning Lv, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

ISIJ International　58　(12)　2258-2261　2018/12

DOI： 10.2355/isijinternational.ISIJINT-2018-281 　

ISSN： 0915-1559

Effect of Fe ²⁺ /T.Fe Ratio on the Dissolution Behavior of P from Steelmaking Slag with High P <inf>2</inf> O <inf>5</inf> Content Peer-reviewed

Chuan ming Du, Xu Gao, Shigeru Ueda, Shin ya Kitamura

Journal of Sustainable Metallurgy　4　(4)　443-454　2018/12/01

DOI： 10.1007/s40831-018-0190-4 　

ISSN： 2199-3823

Contribution of mineralogical phases on alkaline dissolution from steelmaking slag Peer-reviewed

Zuoqiao Zhu, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of 2018 China Symposium on Sustainable Steelmaking Technology　2018/10

Chemical interactions between pre-oxidized Zircaloy-4 and 304 stainless steel-B4C melt at 1300 degrees C Peer-reviewed

Lichun Zheng, Kazuya Hosoi, Shigeru Ueda, Xu Gao, Shin-ya Kitamura, Yoshinao Kobayashi, Ayako Sudo

JOURNAL OF NUCLEAR MATERIALS　508　361-370　2018/09

DOI： 10.1016/j.jnucmat.2018.05.057 　

ISSN： 0022-3115

eISSN： 1873-4820

Si-rich phases and their distributions in the oxide scale formed on 304 stainless steel at high temperatures Peer-reviewed

Lichun Zheng, Kazuya Hosoi, Shigeru Ueda, Xu Gao, Shin-ya Kitamura, Yoshinao Kobayashi

JOURNAL OF NUCLEAR MATERIALS　507　327-338　2018/08

DOI： 10.1016/j.jnucmat.2018.05.018 　

ISSN： 0022-3115

eISSN： 1873-4820

Oxidation behaviour of Zr-1.7Sn-2.3Hf alloy in nitrogen-containing steam at 1200 degrees C Peer-reviewed

Lichun Zheng, Kazuya Hosoi, Shigeru Ueda, Xu Gao, Shin-ya Kitamura, Yoshinao Kobayashi

CORROSION SCIENCE　140　363-373　2018/08

DOI： 10.1016/j.corsci.2018.05.029 　

ISSN： 0010-938X

eISSN： 1879-0496

Extraction of phosphorus from steelmaking slag by selective leaching using citric acid Peer-reviewed

Takayuki Iwama, Chuan ming Du, Xu Gao, Sun joong Kim, Shigeru Ueda, Shin ya Kitamura

ISIJ International　58　(7)　1351-1360　2018/07/15

DOI： 10.2355/isijinternational.ISIJINT-2017-658 　

ISSN： 0915-1559

Dissolution Behavior of Mg from Magnesia-Chromite Refractory into Al-killed Molten Steel Peer-reviewed

Chunyang Liu, Motoki Yagi, Xu Gao, Sun-Joong Kim, Fuxiang Huang, Shigeru Ueda, Shin-ya Kitamura

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science　49　(5)　1-10　2018/06/04

DOI： 10.1007/s11663-018-1301-0 　

ISSN： 1073-5615

Optimum Conditions for Phosphorus Recovery from Steelmaking Slag with High P₂O₅ Content by Selective Leaching Peer-reviewed

Chuan-ming Du, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

ISIJ International　58　(5)　860-868　2018/05/15

DOI： 10.2355/isijinternational.isijint-2017-669 　

ISSN： 0915-1559

eISSN： 1347-5460

Interaction between B4C, 304 stainless steel, and Zircaloy-4 in H2O/H2 atmosphere at 1473 K Peer-reviewed

Xu Gao, Ryosuke Sasaki, Lichun Zheng, Shigeru Ueda, Sun-joong Kim, Shin-ya Kitamura, Yoshinao Kobayashi

Journal of Nuclear Science and Technology　55　(4)　400-409　2018/04/03

DOI： 10.1080/00223131.2017.1403388 　

ISSN： 0022-3131

Kinetics of Transformation of Al2O3 to MgO·Al2O3 Spinel Inclusions in Mg-Containing Steel

Chunyang Liu, Motoki Yagi, Xu Gao, Sun-joong Kim, Fuxiang Huang, Shigeru Ueda, Shin-ya Kitamura

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science　49　(1)　113-122　2018/02/01

DOI： 10.1007/s11663-017-1122-6 　

ISSN： 1073-5615

Effect of Si Content on Oxide Formation on Surface of Molten Fe-Cr-C Alloy Bath During Oxygen Top Blowing

Ryosuke Mihara, Xu Gao, Sun-joong Kim, Shigeru Ueda, Hiroyuki Shibata, Min Oh Seok, Shin-ya Kitamura

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science　49　(1)　146-158　2018/02/01

DOI： 10.1007/s11663-017-1135-1 　

ISSN： 1073-5615

Distribution of P2O5 and Na2O Between Solid Solution and Liquid Phase in the CaO-SiO2-Fe2O3-P2O5-Na2O Slag System with High P2O5 Content

Chuan-ming Du, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science　49　(1)　181-189　2018/02/01

DOI： 10.1007/s11663-017-1151-1 　

ISSN： 1073-5615

Dissolution behavior of Mg from MgO–C refractory in Al-killed molten steel

Chunyang Liu, Xu Gao, Sun-Joong Kim, Shigeru Ueda, Shin-Ya Kitamura

ISIJ International　58　(3)　488-495　2018

DOI： 10.2355/isijinternational.ISIJINT-2017-593 　

ISSN： 0915-1559

Recovery of P from steelmaking slag with high P2O5 content by selective leaching Peer-reviewed

Chan-ming Du, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of 2018 China Symposium on Sustainable Steelmaking Technology　2018

Ca and Mg dissolution behavior from CaO and MgO saturated slag into Al-killed steel Peer-reviewed

Chunyang Liu, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of 2018 China Symposium on Sustainable Steelmaking Technology　2018

Transformation of Al2O3 inclusion by the reaction between MgO-based refractory and Al-killed molten steel Peer-reviewed

Chunyang Liu, Motoki Yagi, Xu Gao, Sun-joong Kim, Fuxiang Huang, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 10th International Conference and Exhibition on Clean Steel　2018

Wetting behavior of slag with metallurgical cokes Peer-reviewed

Shigeru Ueda, Xu Gao, Shinsuke Ogyu, Shin-ya Kitamura

Proceedings of the 7th International Congress on Science and Technology of Steelmaking　2018

Solubility of sulfur in the solid oxide of CaO-Al2O3 system Peer-reviewed

Xu Gao, Yosuke Baba, Masashi Nishimoto, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 7th International Congress on Science and Technology of Steelmaking　2018

Falling motion of molten slag on coke bed in blast furnace Peer-reviewed

Shinsuke Ogyu, Shigeru Ueda, Xu Gao, Lichun Zheng, Shin-ya Kitamura

Proceedings of the 3rd International Conference on Advances in Metallurgical Processes and Materials　2018

Extraction of Phosphorus from Steelmaking Slag by Selective Leaching Using Citric Acid Peer-reviewed

Iwama Takayuki, Du Chuan-ming, Gao Xu, Kim Sun-joong, Ueda Shigeru, Kitamura Shin-ya

ISIJ INTERNATIONAL　58　(7)　1351-1360　2018

DOI： 10.2355/isijinternational.ISUINT-2017-658 　

ISSN： 0915-1559

Effect of Slag Composition on the Dissolution of Phosphorus from Steelmaking Slag by Selective Leaching Peer-reviewed

Du Chuan-ming, Gao Xu, Ueda Shigeru, Kitamura Shin-ya

ISIJ INTERNATIONAL　58　(9)　1659-1668　2018

DOI： 10.2355/isijinternational.ISIJINT-2018-240 　

ISSN： 0915-1559

Motion of Droplet on Gasified Metallurgical Cokes. Peer-reviewed

Shinsuke Ogyu, Shigeru Ueda, Xu Gao, Lichun Zheng, Shin-ya Kitamura

Proceedings of the 3rd International Conference on Science and Technology of Ironmaking & Steelmaking – STIS2017　215-218　2017/12

Extraction and Recovery of Valuable Elements from Steelmaking Slag Peer-reviewed

Shin-ya Kitamura, Shigeru Ueda, Xu Gao, Sun-joong Kim

Proceedings of the 3rd International Conference on Science and Technology of Ironmaking & Steelmaking – STIS2017　13-17　2017/12

Measurement of interaction parameters between Al and Cu, Al and Sn in molten high Al steel. Peer-reviewed

Shigeru Ueda, Kengo Sugiyama, Xu Gao, Sun-Joong Kim, Shin-ya Kitamura

Proceedings of the 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry – EMECR2017　80-81　2017/10

Arsenic Removal from Contaminated Water Using the CaO-SiO2-FeO Glassy Phase in Steelmaking Slag Peer-reviewed

Hiroki Yoshida, Xu Gao, Shohei Koizumi, Sun-joong Kim, Shigeru Ueda, Takahiro Miki, Shin-ya Kitamura

JOURNAL OF SUSTAINABLE METALLURGY　3　(3)　470-485　2017/09

DOI： 10.1007/s40831-016-0108-y 　

ISSN： 2199-3823

eISSN： 2199-3831

Influence of Interfacial Tension and Viscosity on the Formation of Metal Emulsion by Rising Gas Bubble. Peer-reviewed

Jiang Liu, Sun-joong Kim, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 3rd European Steel Technology and Application Days – ESTAD2017,　993-1000　2017/06

Solubility of sulfur in the solid oxide of calcium aluminate system – Precipitation of calcium sulfide from the inclusion – Peer-reviewed

Masaaki Kageyama, Sun-joong Kim, Xu Gaoa, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 9th European Continuous Casting Conference – ECCC 2017　775-762　2017/06

Removal of arsenic from polluted water by steelmaking slag Peer-reviewed

Hiroki Yoshida, Xu Gao, Sun-joong Kim, Shigeru Ueda, Takahiro Miki, Shin-ya Kitamura

Proceedings of the 4th International Conference on Advances in Materials & Materials Processing, ICAMMP-IV　CD-ROM　2016/11/05

Gas Permeability in Blast Furnace under Low Carbon Rate Operation Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Xu Gao, Hiroshi Nogami, Shin-ya Kitamura

Proceedings of the 14th Japan-China Symposium on Science and Technology of Iron and Steelmaking　18-26　2016/09/05

Effect of Interfaial Tension on the Droplet Formation by Bubble Rupture in Sn/Sn-Te and Salt System Peer-reviewed

Sun-Joong Kim, Hiryonori Yoshida, Jinag Liu, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 11th Korea-Japan Workshop on Science and Technology in Ironmaking and Steelmaking　86-88　2016/08/04

Effects of Al2O3 and MgO on Softening, Melting, and Permeation Properties of CaO-FeO-SiO2 on a Coke Bed Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Takahiro Miki, Sun-Joong Kim, Hiroshi Nogami

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE　47　(4)　2371-2377　2016/08

DOI： 10.1007/s11663-016-0683-0 　

ISSN： 1073-5615

eISSN： 1543-1916

Direct Observation of Formation Behavior of Metal Emulsion in Sn/Salt System Peer-reviewed

Hironori Yoshida, Jiang Liu, Sun-Joong Kim, Xu Gao, Shigeru Ueda, Nobuhiro Maruoka, Shinpei Ono, Shin-Ya Kitamura

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE　47　(4)　2498-2508　2016/08

DOI： 10.1007/s11663-016-0679-9 　

ISSN： 1073-5615

eISSN： 1543-1916

Reaction behavior between B4C, 304 grade of stainless steel and Zircaloy at 1473 K Peer-reviewed

Ryosuke Sasaki, Shigeru Ueda, Sun-Joong Kim, Xu Gao, Shin-ya Kitamura

JOURNAL OF NUCLEAR MATERIALS　477　205-214　2016/08

DOI： 10.1016/j.jnucmat.2016.04.049 　

ISSN： 0022-3115

eISSN： 1873-4820

A Kinetic Assessment of Manganese Recovery from Steelmaking Slag by Sulfurization and Oxidation. Peer-reviewed

Shin-ya Kitamura, Sun-Joong Kim, Junpei Suzuki, Xu Gao, Shigeru Ueda

Proceedings of the 5th International Conference on Process Development in Iron and Steelmaking (SCANMET-V)　CD-ROM　2016/06/13

A Kinetic Model to Simulate the Reaction Between Slag and Matte for the Production of Ferromanganese Alloy from Steelmaking Slag Peer-reviewed

Sun-Joong Kim, Junpei Suzuki, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

J. Sustain. Metall.　2　(2)　141-151　2016/06

DOI： 10.1007/s40831-016-0042-z 　

Improving the Dissolution of Phosphorus from 2CaO·SiO₂-3CaO·P₂O₅ Solid Solution in Aqueous Solutions Peer-reviewed

Chuan-ming Du, Xu Gao, Sun-joong Kim, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts　909-918　2016/05/23

Observation of Oxide Formation for Molten Fe-Cr-C Alloy at a High Carbon Region by Oxygen Top Blowing Peer-reviewed

Ryosuke Mihara, Xu Gao, Shigeru Kaneko, Sunjoong Kim, Shigeru Ueda, Hiroyuki Shibata, Min Oh Seok, Shin-Ya Kitamura

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE　47　(2)　1035-1051　2016/04

DOI： 10.1007/s11663-015-0555-z 　

ISSN： 1073-5615

eISSN： 1543-1916

Effects of Acid and Na2SiO3 Modification on the Dissolution Behavior of 2CaO center dot SiO2-3CaO center dot P2O5 Solid Solution in Aqueous Solutions Peer-reviewed

Chuan-ming Du, Xu Gao, Sun-joong Kim, Shigeru Ueda, Shin-ya Kitamura

ISIJ INTERNATIONAL　56　(8)　1436-1444　2016

DOI： 10.2355/isijinternational.ISIJINT-2016-022 　

ISSN： 0915-1559

eISSN： 1347-5460

Influence of the Interfacial Tension on the Droplet Formation by Bubble Rupture in Sn(Te) and Salt System Peer-reviewed

Hironori Yoshida, Jiang Liu, Sun-Joong Kim, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

ISIJ INTERNATIONAL　56　(11)　1902-1909　2016

DOI： 10.2355/isijinternational.ISIJINT-2016-303 　

ISSN： 0915-1559

eISSN： 1347-5460

Reaction between B4C and austenitic stainless steel in oxidizing atmosphere at temperatures below 1673 K Peer-reviewed

Ryosuke Sasaki, Shigeru Ueda, Sun-Joong Kim, Xu Gao, Shin-ya Kitamura

JOURNAL OF NUCLEAR MATERIALS　466　(11)　334-342　2015/11

DOI： 10.1016/j.jnucmat.2015.07.015 　

ISSN： 0022-3115

eISSN： 1873-4820

Metal emulsion formed by bottom gas flow in Sn alloy/Oxide system Peer-reviewed

Jiang Liu, Sun-Joong Kim, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 10th CSM Steel Congress and the 6th Baosteel Biannual Academic Conference　CD-ROM　2015/10/21

Extraction of Phosphorous from Steelmaking Slag by Leaching Peer-reviewed

Sun-Joong Kim, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of the 10th CSM Steel Congress and the 6th Baosteel Biannual Academic Conference　CD-ROM　2015/10/21

Improvement if gas permeability of the dripping zone in blast furnace Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Hiroshi Nogami, Shin-ya Kitamura

Proceedings of Aisia Seel International Conference 2015　166-167　2015/10/06

Influence of molten steel composition on dissolution behavior of Mg from refractory Peer-reviewed

Motoki Yagi, Koki Suzuki, Sun-Joong Kim, Xu Gao, Shigeru Ueda, Shin-ya Kitamura

Proceedings of Aisia Seel International Conference 2015　204-205　2015/10/06

Influence of oxidizing atmosphere in nuclear reactor on reaction between B4C and austenitic stainless steel Peer-reviewed

Ryosuke Sasaki, Shigeru Ueda, Sun-Joong Kim, Xu Gao, Shin-ya Kitamura

Proceedings of Aisia Seel International Conference 2015　240-241　2015/10/06

Reaction Between MnO-SiO2-FeO Solid Oxide and Solid Steel Deoxidized by Si and Mn During Heat Treatment at 1473 K (1200 degrees C) Peer-reviewed

Cheng-song Liu, Kyung-Ho Kim, Sun-Joong Kim, Jing-She Li, Shigeru Ueda, Xu Gao, Hiroyuki Shibata, Shin-Ya Kitamura

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE　46　(4)　1875-1884　2015/08

DOI： 10.1007/s11663-015-0356-4 　

ISSN： 1073-5615

eISSN： 1543-1916

Droplet Motion on Non-smooth Solid Surface Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Shin Kikuchi, Shungo Natsui, Sohei Sukenaga, Hiroshi Nogami

ISIJ INTERNATIONAL　55　(6)　1277-1283　2015

DOI： 10.2355/isijinternational.55.1277 　

ISSN： 0915-1559

eISSN： 1347-5460

Reduction Behavior of Packed Bed of Sinter Reduced by CO-CO2-H-2-H2O-N-2 Gas Peer-reviewed

Tatsuya Kon, Ryo Saito, Shigeru Ueda, Shungo Natsui, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　55　(6)　1213-1222　2015

DOI： 10.2355/isijinternational.55.1213 　

ISSN： 0915-1559

eISSN： 1347-5460

Influence of Shape of Cohesive Zone on Gas Flow and Permeability in the Blast Furnace Analyzed by DEM-CFD Model Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Hiroyuki Kurosawa, Shungo Natsui, Tatsuro Ariyama, Hiroshi Nogami

ISIJ INTERNATIONAL　55　(6)　1232-1236　2015

DOI： 10.2355/isijinternational.55.1232 　

ISSN： 0915-1559

eISSN： 1347-5460

Analysis of Effect of Packed Bed Structure on Liquid Flow in Packed Bed Using Moving Particle Semi-implicit Method Peer-reviewed

Tatsuya Kon, Shungo Natsui, Shigeru Ueda, Hiroshi Nogami

ISIJ INTERNATIONAL　55　(6)　1284-1290　2015

DOI： 10.2355/isijinternational.55.1284 　

ISSN： 0915-1559

eISSN： 1347-5460

Analysis of Powder Motion in a Packed Bed of Blast Furnace Using the Discrete Element Method Peer-reviewed

Shin Kikuchi, Tatsuya Kon, Shigeru Ueda, Shungo Natsui, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　55　(6)　1313-1320　2015

DOI： 10.2355/isijinternational.55.1313 　

ISSN： 0915-1559

eISSN： 1347-5460

Characterization of Liquid Trickle Flow in Poor-Wetting Packed Bed Peer-reviewed

Shungo Natsui, Tatsuya Kikuchi, Ryosuke O. Suzuki, Tatsuya Kon, Shigeru Ueda, Hiroshi Nogami

ISIJ INTERNATIONAL　55　(6)　1259-1266　2015

DOI： 10.2355/isijinternational.55.1259 　

ISSN： 0915-1559

eISSN： 1347-5460

Softening, Melting, and Permeation Phenomena of CaO-FeO-SiO2 Oxide on a Coke Bed Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Takahiro Miki, Sun-Joong Kim, Hiroshi Nogami

ISIJ INTERNATIONAL　55　(10)　2098-2104　2015

DOI： 10.2355/isijinternational.ISIJINT-2015-269 　

ISSN： 0915-1559

eISSN： 1347-5460

Improvement of Productivity of Blast Furnace under Low-Carbon Rate Operation Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Hiroshi Nogami, Shinya Kitamura

European steel environment & enery congress(ESEC) 2014　69　2014/09

Liquid and Powder Motion in Packed bed Peer-reviewed

Tatsuya Kon, Shin Kikushchi, Shigeru Ueda, Ryo Inoue

Jounal of JSEM(Journal of the Japneses Society for Experimental Mechanics)　14　s237-s241　2014/07

DOI： 10.11395/jjsem.14.s237 　

Agenda for Low Reducing Agent Operation of Blast Furnace : Thermophysical Properties of Molten Slags on the Gas Permeability at the Dripping Zone of Blast Furnace Peer-reviewed

Hayashi, M., Sukenaga, S., Ohno, K.-I., Ueda, S., Sunahara, K., Saito, N.

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　19　(2)　211-226　2014

DOI： 10.2355/tetsutohagane.100.211 　

ISSN： 1341-688X

Recent progress on advanced blast furnace mathematical model based on discrete method Peer-reviewed

Tatsuro Ariyama, Shungo Natsui, Tatsuya Kon, Shigeru Ueda, Shin Kikuchi, Hiroshi Nogami

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　100　(2)　198-210　2014

DOI： 10.2355/tetsutohagane.100.198 　

ISSN： 0021-1575

Agenda for Low Reducing Agent Operation of Blast Furnace: Thermophysical Properties of Molten Slags on the Gas Permeability at the Dripping Zone of Blast Furnace Peer-reviewed

Hayashi Miyuki, Sukenaga Sohei, Ohno Ko-ichiro, Ueda Shigeru, Sunahara Kohei, Saito Noritaka

Tetsu-to-Hagane　100　(2)　211-226　2014

DOI： 10.2355/tetsutohagane.100.211 　

ISSN： 0021-1575

eISSN： 1883-2954

Aspects from Powder Behavior to Ensure Burden Bed Permeability for Low Carbon Operation of Blast Furnace Peer-reviewed

Nogami Hiroshi, Ueki Yasuaki, Murakami Taichi, Ueda Shigeru

Tetsu-to-Hagane　100　(2)　227-245　2014

DOI： 10.2355/tetsutohagane.100.227 　

ISSN： 0021-1575

Analysis of the Burden Descending Behavior in an Enlarged Shaft Furnace for Ferro-Coke Production by DEM Peer-reviewed

Tatsuya Kon, Shungo Natsui, Shigeru Ueda, Ryo Inoue, Seiji Enoeda, Tatsuro Ariyama

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN　100　(5)　1-8　2014

DOI： 10.2355/tetsutohagane.100.593 　

ISSN： 0021-1575

eISSN： 1883-2954

Effect of Powder-Liquid Interaction on Their Accumulation Behavior in Packed Bed Peer-reviewed

Shin Kikuchi, Shigeru Ueda, Tatsuya Kon, Ryo Inoue, Shungo Natsui, Hiroshi Nogami

ISIJ INTERNATIONAL　54　(6)　1244-1250　2014

DOI： 10.2355/isijinternational.54.1244 　

ISSN： 0915-1559

eISSN： 1347-5460

Influence of Cohesive Zone Thickness on Gas Flow in Blast Furnace Analyzed by DEM-CFD Model Considering Low Coke Operation Peer-reviewed

Tatsuya Kon, Shungo Natsui, Shohei Matsuhashi, Shigeru Ueda, Ryo Inoue, Tatsuro Ariyama

STEEL RESEARCH INTERNATIONAL　84　(11)　1146-1156　2013/11

DOI： 10.1002/srin.201300025 　

ISSN： 1611-3683

eISSN： 1869-344X

Liquid and powder motion inpacked bed

Tatsuya Kon, Shin Kikushchi, Shigeru Ueda, Ryo Inoue

The 8th International Symposium on Advanced Science and Technolgoy in experimental Mechanics　96　2013/11

Effect of wettability on the accumulation of powder Peer-reviewed

Shin Kikuchi, Tatsuya Kon, Shigeru Ueda, Ryo Inoue

International conference on smart carbon saving and recycling for ironmaking　43-44　2013/10

Analysis of a Liquid Flow In a Blat Furance for Low Coke Rate Operation Peer-reviewed

Tatsuya Kon, Shin Kikushchi, Shigeru Ueda, Ryo Inoue

International conference on smart carbon saving and recycling for ironmaking　47-48　2013/10

Issue for Achievement of Low-Carbon Blast Furnace Operation Peer-reviewed

Shigeru Ueda, Tatsuya Kon, Shin Kikuchi, Ryo Inoue

International conference on smart carbon saving and recycling for ironmaking　9-10　2013/10

Modeling of liquid flow in the lower part of blast furnace by MPS method Peer-reviewed

Tatsuya Kon, Shungo Natsui, Shin Kikuchi, Shigeru Ueda, Ryo Inoue, Tatsuro Ariyama

5th International conference on modeling and simulation of metallurgical processes in steelmaking.　10　2013/09

Simulation Model of Powder Movement in Packed Bed by Discrete Element Method Peer-reviewed

Shin Kikuchi, Tatsuya Kon, Shigeru Ueda, Ryo Inoue, Shungo Natsui, Taturo Ariyama

5th International conference on modeling and simulation of metallurgical processes in steelmaking.　9　2013/09

Discrete Element Study of Fines Clogging a Packed Bed for the Low Carbon Ironmaking Process

S. Natsui, S. Kikuchi, T. Kon, S. Ueda, R. Inoue, T. Ariyama

Japan-Russia Workshop on Advanced Materials Synthesis Process and Nanostructure　B25　2013/03

Analysis of Liquid Dripping in Ironmaking Based on Particle Method

T. Kon, S. Natsui, S. Ueda, R. Inoue, T. Ariyama

Japan-Russia Workshop on Advanced Materials Synthesis Process and Nanostructure　B30　2013/03

Influence of Physical Properties of Melt on Liquid Dripping in Packed Bed Analyzed by MPS Method Peer-reviewed

Kon, Tatsuya, Natsui, Shungo, Ueda, Shigeru, Inoue, Ryo, Ariyama, Tatsuro

ISIJ INTERNATIONAL　53　(4)　590-597　2013

DOI： 10.2355/isijinternational.53.590 　

ISSN： 0915-1559

eISSN： 1347-5460

Reaction Behavior in Packed Bed Considering Bed Structure and Reaction Properties of Particles Peer-reviewed

Shibasaki Ryo, Natsui Shungo, Kon Tatsuya, Ueda Shigeru, Inoue Ryo, Ariyama Tatsuro

Tetsu-to-Hagane　99　(6)　391-400　2013

DOI： 10.2355/tetsutohagane.99.391 　

ISSN： 0021-1575

eISSN： 1883-2954

Effect of High Reactivity Coke for Mixed Charge in Ore Layer on Reaction Behavior of Each Particle in Blast Furnace Peer-reviewed

Shungo Natsui, Ryo Shibasaki, Tatsuya Kon, Shigeru Ueda, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　53　(10)　1770-1778　2013

DOI： 10.2355/isijinternational.53.1770 　

ISSN： 0915-1559

eISSN： 1347-5460

Applicability of Nonaqueous Electrolytes for Electrolytic Extraction of Inclusion Particles Containing Zr, Ti, and Ce Peer-reviewed

Ryo Inoue, Rika Kimura, Shigeru Ueda, Hideaki Suito

ISIJ INTERNATIONAL　53　(11)　1906-1912　2013

DOI： 10.2355/isijinternational.53.1906 　

ISSN： 0915-1559

eISSN： 1347-5460

Three dimensional estimation of multi-component inclusion particle in steel Peer-reviewed

R.Inoue, K. Kiyokawa, K. Tomoda, S. Ueda, T. Ariyama

Metallurgical Analysis　32　(8)　1-8　2012/08

Experimental Study and Atomic Level Description of Adsorption Process of CO_2 on Doped Alkaline Earth Oxides Peer-reviewed

SASAKI Kohei, WAKUTA Koji, TOKUDA Natsuki, BELOSLUDOV Rodion V., UEDA Shigeru, INOUE Ryo, KAWAZOE Yoshiyuki, ARIYAMA Tatsuro

ISIJ International　52　(7)　1233-1240　2012/07/15

DOI： 10.2355/isijinternational.52.1233 　

ISSN： 0915-1559

Thermodynamic Properties of Lead Oxide in a Mixture of Stainless Steelmaking and Nonferrous Smelting Slags Peer-reviewed

Nobuhiro Maruoka, Shigeru Ueda, Hiroyuki Shibata, Katsunori Yamaguchi, Shin-ya Kitamura

HIGH TEMPERATURE MATERIALS AND PROCESSES　31　(3)　273-279　2012/06

DOI： 10.1515/htmp-2011-0139 　

ISSN： 0334-6455

Effective sequestration of carbon dioxide by chemical sorption of Li2O-compounds

R. Inoue, S. Ueda, N. Tokuda, K. Sasaki, Y. Kawazoe, T. Ariyama

SCANMET IV, 4th International Conference on Process Development in Iron and Steelmaking　2　29-40　2012/06

Modeling of liquid flow in the lower part of blast furnace by particle method

T. Kon, S. Natsui, R. Soda, S. Ueda, R. Inoue, A. Tatsuro

SCANMET IV, 4th International Conference on Process Development in Iron and Steelmaking　2　41-50　2012/06

DOI： 10.2355/isijinternational.51.41 　

Advanced gas-solid flow simulation in blast furnace by Eulerian-Lagrangian approach

S. Natsui, T. Kon, S. Ueda, J. Kano, R. Inoue, T. Ariyama, H. Nogami

SCANMET IV, 4th International Conference on Process Development in Iron and Steelmaking　2　59-68　2012/06

Enhancement of reducing agent reactivity for mitigating CO2 emissions from ironmaking process

S. Ueda, T. Kon, S. Natsui, R. Inoue, T. Ariyama

SCANMET IV, 4th International Conference on Process Development in Iron and Steelmaking　2　9-18　2012/06

Wettability Model Considering Three-Phase Interfacial Energetics in Particle Method Peer-reviewed

NATSUI Shungo, SODA Rikio, KON Tatsuya, UEDA Shigeru, KANO Junya, INOUE Ryo, ARIYAMA Tatsuro

Materials Transactions　53　(4)　662-670　2012/04/01

DOI： 10.2320/matertrans.M2011330 　

ISSN： 1345-9678

eISSN： 1347-5320

Gas-solid flow simulation of fines clogging a packed bed using DEM-CFD Peer-reviewed

Shungo Natsui, Shigeru Ueda, Hiroshi Nogami, Junya Kano, Ryo Inoue, Tatsuro Ariyama

CHEMICAL ENGINEERING SCIENCE　71　(March)　274-282　2012/03

DOI： 10.1016/j.ces.2011.12.035 　

ISSN： 0009-2509

High Temperature Enthalpy Measurement of SUS340 Stainless Steel using Drop-calorimetry Peer-reviewed

Katsunori Yamaguchi, Shigeru Ueda

High Temperature Materials and Processes　31　569-572　2012/01

DEM-CFD Model Considering Softening Behavior of Ore Particles in Cohesive Zone and Gas Flow Analysis at Low Coke Rate in Blast Furnace Peer-reviewed

Hiroyuki Kurosawa, Shouhei Matsuhashi, Shungo Natsui, Tatsuya Kon, Shigeru Ueda, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　52　(6)　1010-1017　2012

DOI： 10.2355/isijinternational.52.1010 　

ISSN： 0915-1559

Analysis of Heat and Mass Transfer in a Packed Bed by Considering Particle Arrangement Peer-reviewed

Natsui Shungo, Kon Tatsuya, Ueda Shigeru, Kano Junya, Inoue Ryo, Ariyama Tatsuro, Nogami Hiroshi

Tetsu-to-Hagane　98　(7)　341-350　2012

DOI： 10.2355/tetsutohagane.98.341 　

ISSN： 0021-1575

Numerical Simulation of Dripping Behavior of Droplet in Packed Bed Using Particle Method Peer-reviewed

Tatsuya Kon, Shungo Natsui, Shigeru Ueda, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　52　(9)　1565-1573　2012

DOI： 10.2355/isijinternational.52.1565 　

ISSN： 0915-1559

Descending Behavior of Particles in Vertical Type Coke Oven by Cold Model and DEM Calculation Peer-reviewed

Kon Tatsuya, Kojima Katsutoshi, Natsui Shungo, Ueda Shigeru, Inoue Ryo, Ariyama Tatsuro

Tetsu-to-Hagane　98　(9)　459-468　2012

DOI： 10.2355/tetsutohagane.98.459 　

ISSN： 0021-1575

Evaluation of Coke Mixed Charging Based on Packed Bed Structure and Gas Permeability Changes in Blast Furnace by DEM-CFD Model Peer-reviewed

Shouhei Matsuhashi, Hiroyuki Kurosawa, Shungo Natsui, Tatsuya Kon, Shigeru Ueda, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　52　(11)　1990-1999　2012

DOI： 10.2355/isijinternational.52.1990 　

ISSN： 0915-1559

Extraction of Nonmetallic Inclusion Particles Containing MgO from Steel Peer-reviewed

INOUE Ryo, UEDA Shigeru, ARIYAMA Tatsuro, SUITO Hideaki

ISIJ International　51　(12)　2050-2055　2011/12/15

DOI： 10.2355/isijinternational.51.2050 　

ISSN： 0915-1559

Penetration Effect of Injected Gas at Shaft Gas Injection in Blast Furnace Analyzed by Hybrid Model of DEM-CFD Peer-reviewed

NATSUI Shungo, UEDA Shigeru, NOGAMI Hiroshi, KANO Junya, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　51　(8)　1410-1417　2011/08/15

DOI： 10.2355/isijinternational.51.1410 　

ISSN： 0915-1559

Analysis on Non-Uniform Gas Flow in Blast Furnace Based on DEM-CFD Combined Model Peer-reviewed

Shungo Natsui, Shigeru Ueda, Hiroshi Nogami, Junya Kano, Ryo Inoue, Tatsuro Ariyama

STEEL RESEARCH INTERNATIONAL　82　(8)　964-971　2011/08

DOI： 10.1002/srin.201000292 　

ISSN： 1611-3683

eISSN： 1869-344X

Lead Solubility in FeOx-CaO-SiO2-NaO0.5 and FeOx-CaO-SiO2-CrO1.5 Slags under Iron Saturation at 1573 K Peer-reviewed

Dai Matsura, Shigeru Ueda, Katsunori Yamaguchi

HIGH TEMPERATURE MATERIALS AND PROCESSES　30　(4-5)　441-446　2011/08

DOI： 10.1515/HTMP.2011.066 　

ISSN： 0334-6455

Development of Advanced Mathematical Model for Three-dimensional Gas-Solid Flow in Blast Furnace by Combining DEM and CFD

Shungo Natsui, Shigeru Ueda, Hiroshi Nogami, Ryo Inoue, Tatsuro Ariyama

6th European Coke and Ironmaking Congress　(5)　1-10　2011/06/27

Dynamic Behavior of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD

Shigeru Ueda, Shungo Natsui, Ryo Inoue, Tatsuro Ariyama

6th European Coke and Ironmaking Congress　(17)　1-8　2011/06/27

DOI： 10.2355/isijinternational.51.51 　

Novel Process for Carbon Dioxide Capture using Solid Lithium Compounds

Ryo INOUE, Shigeru UEDA, Kohei SASAKI, Koji WAKUTA, Yoshiyuki KAWAZOE, Tatsuro ARIYAMA

1st International Conference on Energy Efficiency and CO2 Reduction in the Steel Industry　(1)　1-10　2011/06/27

DEVELOPMENT OF BLAST FURNACE SIMULATOR BASED ON COMBINED APPROACH OF DISCRETE ELEMENT METHOD AND COMPUTATIONAL FLUID DYNAMICS Peer-reviewed

Hiroshi Nogami, Shungo Natsui, Shigeru Ueda, Junya Kano, Tatsuro Ariyama

Proc. 2011 GUTHRIE SYMPOSIUM　2011/06/06

CO_2 Absorption and Desorption Abilities of Li_2O-TiO_2 Compounds Peer-reviewed

UEDA Shigeru, INOUE Ryo, SASAKI Kohei, WAKUTA Koji, ARIYAMA Tatsuro

ISIJ International　51　(4)　530-537　2011/04/15

DOI： 10.2355/isijinternational.51.530 　

ISSN： 0915-1559

Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD Peer-reviewed

NATSUI Shungo, UEDA Shigeru, NOGAMI Hiroshi, KANO Junya, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　51　(1)　51-58　2011/01/15

DOI： 10.2355/isijinternational.51.51 　

ISSN： 0915-1559

Development of Blast Furnace Operation Simulator by Combining DEM and CFD

Shungo Natsui, Shigeru Ueda, Hiroshi Nogami, Junya Kano, Ryo Inoue, Tatsuro Ariyama

The 7th Japan-Korea Workshop on Science and Technology of Ironmakin and Steelmaking　31-39　2011/01/06

Simultaneous Three-dimensional Analysis of Gas-Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics Peer-reviewed

Shungo Natsui, Hiroshi Nogami, Shigeru Ueda, Junya Kano, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　51　(1)　41-50　2011

DOI： 10.2355/isijinternational.51.41 　

ISSN： 0915-1559

Catalytic Effect of Fe, CaO and Molten Oxide on the Gasification Reaction of Coke and Biomass Char Peer-reviewed

Ueda Shigeru, Watanabe Kentaro, Inoue Ryo, Ariyama Tatsuro

ISIJ International　51　(8)　1262-1268　2011

DOI： 10.2355/isijinternational.51.1262 　

ISSN： 0915-1559

Three-dimensional Evaluation of Inclusion Particles in Steel Invited

Ryo INOUE, Kei KIYOKAWA, Koichiro TOMODA, Shigeru UEDA, Tatsuro ARIYAMA

The Fourth Baosteel Biennial Academic Conference　N1-N10　2010/11/16

Thermodynamic Consideration on the Absorption Properties of Carbon Dioxide to Basic Oxide Peer-reviewed

INOUE Ryo, UEDA Shigeru, WAKUTA Koji, SASAKI Kohei, ARIYAMA Tatsuro

ISIJ International　50　(11)　1532-1538　2010/11/15

DOI： 10.2355/isijinternational.50.1532 　

ISSN： 0915-1559

Influence of Blast Furnace Inner Volume on Solid Flow and Stress Distribution by Three Dimensional Discrete Element Method Peer-reviewed

FAN Zhengyun, IGARASHI Satoru, NATSUI Shungo, UEDA Shigeru, YANG Tianjun, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　50　(10)　1406-1412　2010/10/15

DOI： 10.2355/isijinternational.50.1406 　

ISSN： 0915-1559

Dynamic analysis of gas and solid flows in blast furnace with shaft gas injection by hybrid model of DEM-CFD

Shungo NATSUI, Shigeru UEDA, Hiroshi NOGAMI, Junya KANO, Ryo INOUE, Tatsuro ARIYAMA

German-Japanese Workshop on Challenges in Ironmaking　16-20　2010/07/10

Recent Progress and Future Perspective on Ironmaking for CO2 Mitigation

Tatsuro ARIYAMA, Shigeru UEDA, Shungo NATSUI, Ryo INOUE, Michitaka SATO

German-Japanese Workshop on Challenges in Ironmaking　5-11　2010/07/10

Carbon Dioxide Absorption and Desorption Properties of Basic Oxide

Shigeru UEDA, Ryo INOUE, Kohei SASAKI, Tatsuro ARIYAMA

German-Japanese Workshop on Challenges in Ironmaking　50-55　2010/07/10

Immobilization of Harmful Elements in Steelmaking Slags

Ryo INOUE, Shigeru UEDA, Tatsuro ARIYAMA

German-Japanese Workshop on Challenges in Ironmaking　61-66　2010/07/10

Enhancement of Reactivity of Carbon Iron Ore Composite Using Redox Reaction of Iron Oxide Powder Peer-reviewed

WATANABE Kentaro, UEDA Shigeru, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　50　(4)　524-530　2010/04/15

DOI： 10.2355/isijinternational.50.524 　

ISSN： 0915-1559

Characteristics of Solid Flow and Stress Distribution Including Asymmetric Phenomena in Blast Furnace Analyzed by Discrete Element Method Peer-reviewed

NATSUI Shungo, UEDA Shigeru, FAN Zhengyun, ANDERSSON Nils, KANO Junya, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　50　(2)　207-214　2010/02/15

DOI： 10.2355/isijinternational.50.207 　

ISSN： 0915-1559

eISSN： 1347-5460

Ab initio Simulation of Chemical CO2 Adsorption Process

Koji WAKUTA, Kohei SASAKI, Shigeru UEDA, Ryo INOUE, R.BELOSLUDOV, Yoshiyuki KAWAZOE, Tatsuro ARIYAMA

The Fourth General Meeting of ACCMS-VO (Asian Consortium on Computational Materials Science - Virtual Organization)　2010/01/12

CO2 Capture Using Solid Alkaline Compounds

Ryo INOUE, Shigeru UEDA, Kohei SASAKI, Koji WAKUTA, Tatsuro ARIYAMA

The Sixth Korea-Japan Workshop on Science and Technology in Ironmaking and Steelmaking　110-117　2010/01/07

Sensitivity analysis of physical parameters in discrete element method compared with blast furnace cold model experiments Peer-reviewed

Shungo Natsui, Shigeru Ueda, Fan Zhengyun, Junya Kano, Ryo Inoue, Tatsuro Ariyama

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan　96　(1)　1-10　2010

DOI： 10.2355/tetsutohagane.96.1 　

ISSN： 0021-1575

Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method Peer-reviewed

Zhengyun Fan, Shungo Natsui, Shigeru Ueda, Tianjun Yang, Junya Kano, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　50　(7)　946-953　2010

DOI： 10.2355/isijinternational.50.946 　

ISSN： 0915-1559

Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace Peer-reviewed

Shigeru Ueda, Shungo Natsui, Zhengyun Fan, Hiroshi Nogami, Rikio Soda, Junya Kano, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　50　(7)　981-986　2010

DOI： 10.2355/isijinternational.50.981 　

ISSN： 0915-1559

Removal of Mn, Nb, V and P from Iron Ore using Iron and Steelmaking Processes Peer-reviewed

Ryo Inoue, Shigeru Ueda, Tatsuro Ariyama

HIGH TEMPERATURE MATERIALS AND PROCESSES　29　(5-6)　447-460　2010

ISSN： 0334-6455

eISSN： 2191-0324

Recent Activity on the Development of Advanced Mathematical Model of Blast Furnace in Japan Invited

Tatsuro ARIYAMA, Shigeru UEDA, Shungo NATSUI, Junya KANO, Ryo INOUE, Hiroshi NOGAMI

International Conference on Advances in the Theory of Ironmaking and Steelmaking (ATIS 2009)　154-161　2009/12/09

サブミクロン酸化鉄のREDOX反応を利用した高速還元体の創製

渡辺健太郎, 植田 滋, 井上 亮, 有山達郎

2009年度第9回多元物質科学研究所研究発表会　60　2009/12

Production of Mn-Fe Alloy from Slag Generated in Mn-removal Treatment of Molten Cast Iron Peer-reviewed

TAKAGAWA Takahito, UEDA Shigeru, IKE Hiroyuki, IWASHIMIZU Kouji, INOUE Ryo

ISIJ International　49　(11)　1673-1677　2009/11/15

DOI： 10.2355/isijinternational.49.1673 　

ISSN： 0915-1559

アルカリ化合物による固体化学吸収

井上 亮, 和久田康司, 佐々木光平, 植田 滋, 有山達郎

平成21年度多元物質科学研究所資源変換・再生研究センター講演会「新しい二酸化炭素隔離の手法とプロセスを考える」　2009/11

第一原理計算によるCO2固体化学吸収のモデル解析計算

和久田康司, 佐々木光平, 植田 滋, 井上 亮, 有山達郎, Rodion BELOSLUDOV, 川添良幸

平成21年度多元物質科学研究所資源変換・再生研究センター講演会「新しい二酸化炭素隔離の手法とプロセスを考える」　2009/11

鉄鋼業におけるレアメタルの高度利用と循環

井上 亮, 植田 滋, 有山達郎

多元物質科学研究所資源変換・再生研究センターシンポジウム「鉄鋼材料とレアメタル」　42-51　2009/11

Optimization of Biomass Utilization for Reducing CO2 in Ironmaking Process Invited Peer-reviewed

Shigeru Ueda, Kentaro Watanabe, Kazunari Yanagiya, Ryo Inoue, Tatsuro Ariyama

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL　16　593-599　2009/10

ISSN： 1006-706X

Development of Advanced Blast Furnace Simulation Model Based on Discrete Element Method Peer-reviewed

Shungo Natsui, Shigeru Ueda, Fan Zhen-yun, Junya Kano, Hiroshi Nogami, Ryo Inoue, Tatsuro Ariyama

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL　16　1092-1096　2009/10

ISSN： 1006-706X

Current Technology and Future Aspect on CO2 Mitigation in Japanese Steel Industry Invited Peer-reviewed

Tatsuro Ariyama, Shigeru Ueda, Shungo Natsui, Ryo Inoue, Michitaka Sato

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL　16　55-62　2009/10

ISSN： 1006-706X

Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway Peer-reviewed

NATSUI Shungo, UEDA Shigeru, OIKAWA Masashi, FAN Zhengyun, KANO Junya, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　49　(9)　1308-1315　2009/09/15

DOI： 10.2355/isijinternational.49.1308 　

ISSN： 0915-1559

eISSN： 1347-5460

Distributions of Sn, Sb, and Bi between Ag-Pb Alloy and PbO Based Melt at 1273 K Peer-reviewed

Shigeru Ueda, Ryo Katsube, Katsunori Yamaguchi

MATERIALS TRANSACTIONS　50　(7)　1820-1823　2009/07

DOI： 10.2320/matertrans.M2009117 　

ISSN： 1345-9678

eISSN： 1347-5320

Reaction Model and Reduction Behavior of Carbon Iron Ore Composite in Blast Furnace Peer-reviewed

UEDA Shigeru, YANAGIYA Kazunari, WATANABE Kentaro, MURAKAMI Taichi, INOUE Ryo, ARIYAMA Tatsuro

ISIJ International　49　(6)　827-836　2009/06/15

DOI： 10.2355/isijinternational.49.827 　

ISSN： 0915-1559

Activity Coefficient of AgO0.5 in PbO-NaO0.5 and PbO-CaO Melts at 1273 K Peer-reviewed

Shigeru Ueda, Tomomasa Kumagai, Katsunori Yamaguchi

MATERIALS TRANSACTIONS　50　(6)　1457-1461　2009/06

DOI： 10.2320/matertrans.M2009036 　

ISSN： 1345-9678

eISSN： 1347-5320

Desirable utilization of biomass in ironmaking process for reducing CO2 emission. Peer-reviewed

Shigeru UEDA, Kazunari YANAGIYA, Ryo INOUE, Tatsuro ARIYAMA

Asia steel international conference 2009　(S2-07)　1-10　2009/05/24

Thermodynamic Properties of Selenium in Ag-Pb Alloy and Lead Oxide Phases at 1273 K Peer-reviewed

Shigeru Ueda, Ryo Katsube, Katsunori Yamaguchi

MATERIALS TRANSACTIONS　50　(5)　1148-1151　2009/05

DOI： 10.2320/matertrans.M2009021 　

ISSN： 1345-9678

eISSN： 1347-5320

Improvement of Reactivity of Carbon Iron Ore Composite with Biomass Char for Blast Furnace Peer-reviewed

Shigeru Ueda, Kentaro Watanabe, Kazunari Yanagiya, Ryo Inoue, Tatsuro Ariyama

ISIJ INTERNATIONAL　49　(10)　1505-1512　2009

DOI： 10.2355/isijinternational.49.1505 　

ISSN： 0915-1559

Formation of CaCl₂ and CaF₂ from CaSO₄ and Plastics Containing Halogen Element Peer-reviewed

Ueda Shigeru, Hatakeyama Yuuki, Uotani Koji, Yamaguchi Katsunori, Okura Takahiko

Tetsu-to-Hagane　95　(5)　387-392　2009

DOI： 10.2355/tetsutohagane.95.387 　

ISSN： 0021-1575

Effects of the maturity of wood waste compost on the structural features of humic acids Peer-reviewed

Masami Fukushima, Kanako Yamamoto, Keishi Ootsuka, Takeshi Komai, Toshihiro Aramaki, Shigeru Ueda, Shigekazu Horiya

BIORESOURCE TECHNOLOGY　100　(2)　791-797　2009/01

DOI： 10.1016/j.biortech.2008.06.030 　

ISSN： 0960-8524

Reduction Process of Gypsum with Polyethylene at High Temperature Peer-reviewed

UOTANI Koji, UEDA Shigeru, YAMAGUCHI Katsunori, OKURA Takashi

Journal of MMIJ　124　(10)　659-662　2008/11/25

DOI： 10.2473/journalofmmij.124.659 　

ISSN： 1881-6118

Recent Progress and Transition of Irnmaking Technology in Japana Invited Peer-reviewed

Tatsuro Ariyama, Shigeru Ueda, Ryo Inoue

13th VDEh-ISIJ-Seminar 2008（日独鉄鋼セミナー）　31-40　2008/11/19

Control of Biomass Composition for Optimum Injection in Blast Furnace to Mitigate CO_2 Emission in Ironmaking Process Peer-reviewed

UEDA Shigeru, INOUE Ryo, ARIYAMA Tatsuro

Tetsu-to-Hagane　94　(11)　468-474　2008/11/01

DOI： 10.2355/tetsutohagane.94.468 　

ISSN： 0021-1575

Biomass utilization in iron making process for reducing CO2 emission

S.Ueda, K. Yanagiya, R. Inoue, T. Ariyama

3rd International symposium on sustainable materials engineering　2008/10/03

Growth kinetics of intermediate phase layers in an early stage of hot dip galvanizing at 450 degrees C Peer-reviewed

Shigeru Ueda, Osamu Taguchi, Yoshiaki Iijima, Gou Takahashi, Katsunori Yamaguchi

JOURNAL OF MATERIALS SCIENCE　43　(16)　5666-5668　2008/08

DOI： 10.1007/s10853-008-2767-y 　

ISSN： 0022-2461

The impact of surgical treatment and poor prognostic factors for patients with intrahepatic cholangiocarcinoma: Retrospective analysis of 60 patients Peer-reviewed

Yo-Ichi Yamashita, Akinobu Taketomi, Kazutoyo Morita, Takasuke Fukuhara, Shigeru Ueda, Kensaku Sanefuji, Tomohiro Iguchi, Hiroto Kayashima, Keishi Sugimachi, Yoshihiko Maehara

ANTICANCER RESEARCH　28　(4C)　2353-2359　2008/07

ISSN： 0250-7005

Evaluation of Biomass Injection into Blast Furnace for Reducing CO2 Emissions Peer-reviewed

Shigeru Ueda, Tatsuro Ariyama

3rd International Conference on Process Development in Iron and Steelmaking　217-226　2008/06/08

Activity coefficient of strontium in liquid copper and the standard free energy of formation for SrO center dot 6Al(2)O(3) and SrO center dot 2Al(2)O(3) Peer-reviewed

Shigeru Ueda, Keita Utagawa, Katsunori Yamaguchi

MATERIALS TRANSACTIONS　49　(6)　1338-1341　2008/06

DOI： 10.2320/matertrans.MRA2008044 　

ISSN： 1345-9678

eISSN： 1347-5320

Phase equilibrium and activities of Fe-S-O melts Peer-reviewed

Shigeru Ueda, Katsunori Yamaguchi, Yoichi Takeda

MATERIALS TRANSACTIONS　49　(3)　572-578　2008/03

DOI： 10.2320/matertrans.M-MRA2007891 　

ISSN： 1345-9678

eISSN： 1347-5320

Activity coefficient of AgO0.5 in the PbO-SiO2 melt at 1273 K Peer-reviewed

Shigeru Ueda, Tomomasa Kumagai, Katsunori Yamaguchi

MATERIALS TRANSACTIONS　48　(6)　1458-1462　2007/06

DOI： 10.2320/matertrans.MRA2006251 　

ISSN： 1345-9678

eISSN： 1347-5320

バイオマス由来炭材の反応性解析とその制御

植田滋, 井上亮, 有山達郎

平成18年度多元物質科学研究所資源変換・再生研究センタープロジェクト研究成果報告　9-12　2007/05

Wave-induced motion and seismic response characteristics of floating bridge anchored with submarine cable and fender Peer-reviewed

Tadasu Kusaka, Isao Fukuda, Shigeru Ueda, Satoru Shiraishi, Takahiro Sugano

PROCEEDINGS OF THE SEVENTEENTH (2007) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 1- 4, PROCEEDINGS　2523-2530　2007

ISSN： 1098-6189

Reliability of design methods of fender systems for very large container vessels Peer-reviewed

Seigi Yamase, Shigeru Ueda

PROCEEDINGS OF THE SEVENTEENTH (2007) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 1- 4, PROCEEDINGS　3699-3705　2007

ISSN： 1098-6189

Recovery of CaO and CaS from CaSO_4 using waste plastics Peer-reviewed

UEDA Shigeru, HATAKEYAMA Yuuki, YAMAGUCHI Katsunori, NAKAMURA Isao, OKURA Takahiko

Shigen-to-Sozai　122　(9)　456-461　2006/10/04

DOI： 10.2473/shigentosozai.122.456 　

ISSN： 0916-1740

Copper enrichment of iron-base alloy scraps by phase separation in liquid Fe-Cu-P and Fe-Cu-P-C systems Peer-reviewed

Katsunori Yamaguchi, Takuya Ohara, Shigeru Ueda, Yoichi Takeda

MATERIALS TRANSACTIONS　47　(7)　1864-1868　2006/07

DOI： 10.2320/matertrans.47.1864 　

ISSN： 1345-9678

eISSN： 1347-5320

Activities of lead and zinc oxides in CaO-SiO2-FeOx-AlO1.5 slag Peer-reviewed

Katsunori Yamaguchi, Masami Kudo, Yusuke Kimura, Shigeru Ueda, Yoichi Takeda

SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 1　199-+　2006

Distribution of precious metals (Au, Pt, Pd, Rh and Ru) between copper matte and iron-silicate slag at 1573 K Peer-reviewed

Hector M. Henao, Katsunori Yamaguchi, Shigeru Ueda

SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 1　723-+　2006

Elemental sulphur fixation in smelting gas; Is it feasible? Peer-reviewed

Takahiko Okura, Shigeru Ueda, Katsunori Yamaguchi

SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 8　425-+　2006

The contact angle between liquid iron and a single crystal, alumina substrate at 1873 K: Effects of oxygen and droplet size Peer-reviewed

S Ueda, H Shi, Jiang, X, H Shibata, AW Cramb

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE　34　(5)　503-508　2003/10

ISSN： 1073-5615

Phasediagram study on the Al_2O_3-CaO-TiO_2 system

UEDA Shigeru, TAKEMOTO Kouichiro, IKEDA Takashi, MAEDA Masafumi

12　(4)　790-790　1999/09/01

ISSN： 0914-6628